ASA 5510 licenses

Similar Questions

• Cisco ASA 5510 + license + AIP - SSM

  Hello.

  I have this box.

  I have a few questions about it.

  (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

  (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

  (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

  (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

  Please help me.

  (1) you must Smartnet in order to download the software from the download from cisco.com site.

  (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

  (3) Yes, the basic license is OK for the AIP module.

  (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

  Hope that answers your questions.

• All necessary licenses on ASA 5510 for old Cisco VPN Client

  We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with?  No matter what special config that needs to be done on the 5510?

  Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).

  You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.

• VPN Cisco ASA 5510 - 250 licenses?

  I can't find a clear answer on this.  I see that only 2 SSL VPN clients are included, but if I buy an ASA 5510 (ASA5510-BUN-K9), am I allowed to use as a VPN endpoint for up to 250 customers?  If so, is it a total of VPN 'site-to-site' and 'customer '?

  For IPSec VPN (IPSec VPN site-to-site and remote client access), there is no additional license required as it is included in the device.

  For SSL VPN, there is failure to license 2, and if you need more than 2 connections SSL VPN Client, then Yes, you must purchase an additional license (the AnyConnect Essentials or the AnyConnect license Premium depending on what you need).

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• Licenses, IPS on pair of Cisco ASA 5510 active / standby

  I have two ASA 5510 devices in Active mode / standby.  I think of buying both used IPS modules and their installation.  My question is, me 1 or 2 licenses IPS that requires?  We are on 8.4 right now, and I see 8.3 Cisco changed license to c/o to where you need only one license, not two.  This is true for any way VPN licenses, so I was wondering if the same applies to licenses IPS.

  In addition, the unique licensing model will as much as only requiring a base for the pair a/s license too?  Or is the base license, something that you must have two pair a/s?

  Failover doesn't f, you have only one module in the ASA elementary school. You must have two modules. But it is fine if you do not have a subscription license for your secondary IPS (at least for the system).

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• ASA 5510 w / license more lost security contexts

  I have an ASA 5510 with license more than security and when I looked the devices a few days ago, I had 2 contexts, however after you have configured the port of Mgm as a regular port contexts show 0, why?  I can't find anywhere on the internet where this problem occurred: this is the result of show worm:

  Cisco Adaptive Security Appliance Software Version 7.0 (8)

  Updated Sunday, 31 May 08 23:48 by manufacturers

  System image file is "disk0: / asa708 - k8.bin.

  The configuration file to the startup was "startup-config '.

  SHIELDASA01 up to 21 hours 16 minutes

  Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz

  Internal ATA Compact Flash, 256 MB

  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CNlite-MC-Boot-Cisco - 1.2

  SSL/IKE firmware: CNlite-MC-IPSEC-Admin - 3.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Ext: Ethernet0/0: the address is 0021.a025.2d3c, irq 9

  1: Ext: Ethernet0/1: the address is 0021.a025.2d3d, irq 9

  2: Ext: Ethernet0/2: the address is 0021.a025.2d3e, irq 9

  3: Ext: Ethernet0/3: the address is 0021.a025.2d3f, irq 9

  4: Ext: Management0/0: the address is 0021.a025.2d3b, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 25

  Internal hosts: unlimited

  Failover: Active / standby

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  VPN peers: 150

  This platform includes an ASA 5510 Security Plus license.

  I'm not showing the serial number and keys licese for obivious reasons.  Any help? Thanks in advance.

  You might want to try upgrading your IOS on the SAA, see if it can help, can you check the firewall mode (single or multiple) you're currently on? is your asa transparant or routed?

• ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

  Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

  We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

  This is the phone that we seek;

  http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

  I want to know is the Anyconnect Essentials license will work with these IP phones?

  When I do a version of the show,

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

  Hi Leo,

  you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

  ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

  CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

  HTH

  Herbert

• AnyConnect VPN license on ASA 5510

  Hello

  We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

  Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

  What about Anyconnect without customer, I see that I need a premium license?

  This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

  Here is my worm out sh:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 50
  Internal hosts: unlimited
  Failover: disabled
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes a basic license.

  Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

  So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

• ASA 5510 - display block URL Page

  Dear,

  I have Cisco ASA 5510, I have already configured Block_Sites using regular expressions and it works fine. I need to display a Page blocked for any one trying to access blocked sites. Example: I need to display page contains our company Logo and less it shows that "the Site is blocked.

  I can do it on Cisco ASA 5510?

  Thank you

  No, the ASA alone cannot do. To do this, you need a will end UP with appropriate license or a proxy (such as the WSA).

• How many interfaces in asa 5510

  can someone pls tell me how many interfaces in asa 5510.and we can add more interfaces to it.

  concerning

  Assane

  Hi assane,.

  When you order the ASA5510, you can choose between (option Setup/Noo-Noo fixed to add more ports interface):

  1 ASA5510 device comes with 3 x FastEthernet, more 1xmanagement port (FastEthernet)

  ASA5510-BUN-K9: Cisco ASA 5510 Firewall Edition includes 3 Fast Ethernet interfaces, 250 peers IPSec VPN, SSL VPN 2 peers 3DES/AES license, or

  2 ASA5510 comes with 5xFastEthernet, most 1xmanagement port (FastEthernet).

  Cisco ASA 5510 Security Plus Firewall Edition includes 5 interfaces Fast Ethernet, 250 VPN IPSec peers, 2 peers of SSL VPN, high availability active / standby, 3DES/AES license

  http://www.Cisco.com/en/us/products/ps6120/products_data_sheet0900aecd802930c5.html

  Rgds,

  AK

• How default context in plsu security edition asa 5510

  Hi could someon pls tell me with the edition of security plsu asa 5510 it will support active/active failover. and she supports context with securiyt plsu edition. and how default context do we receive with edition of plsu security asa 5510.

  concerning

  Assane

  Hello

  By default, ASA5510 with Security Plus comes with default 2 security [email protected] / * / firewall. Context of maximum security, you can have (upgrade to) is 5.

  With license upgrade of security Plus, you might have active/active and active / standby (choose one to run at any time) high availability services.

  http://www.Cisco.com/en/us/products/ps6120/products_data_sheet0900aecd802930c5.html

  Rgds,

  AK

• How to test ASA 5510 hardware before you buy?

  Im looking to buy a refurbished warranty on ASA 5510 with security license. What tests should all I leads with one independent and the device network to ensure that the material is good?

  Hi, I usually ask a full boot and see the output of the version every time I buy referb or eBay. Sometimes you do not get these output unless the vendor is notified.

• ASA failover license

  I have two firewalls autonomous asa5525-x,

  on two of them, the command show version shows as active/active failover license. Can I use these two to make a pair of active failover / standby?

  ASA what are failover license types? Is this different from PIX?

  Active/active failover is available only for ASAs in multiple context mode. In an active/active failover configuration, the two ASAs can pass network traffic.

  Active failover / standby allows you to use an ASA helps to support the features of a failed unit. When the active unit fails, it changes sleep state while the rescue unit moves to the active state.

  For Active hybrid in multiple context mode, the ASA can switch the entire unit (including all contexts) but cannot switch on different contexts separately.

  In an active/active couple, amounts of license (if any) are merged. For example, the two 5510 s seats in a pair/active every 100 Premium SSL. The licenses will merge to have a total of 200 SSL VPN has helped the pair. The total number should be below the limit of the platform. If the number exceeds the limit of the platform (e.g. 250 SSL VPN connection on a 5510) the limit of the platform will be used on each.

  You can use the active / standby for you.

  You can check your information to license under the 'show version' and 'show activation key '. Here is an example:

  The devices allowed for this platform:<-----------------FEATURES which="" are="" available="" by="" your="">

  The maximum physical Interfaces: 8

  VLAN: 20, unrestricted DMZ

  Internal hosts: unlimited

  Failover: Active / standby

  VPN - A: enabled

  VPN-3DES-AES: enabled

  SSL VPN peers: 2

  The VPN peers total: 25

  Two Internet service providers: enabled

  VLAN Trunk Ports: 8

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect VPN phone Cisco: enabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes an ASA 5505 Security Plus license.<--------------------- type="" of="" your="">

  Serial number: JMX00000000<------------------SERIAL>

  Activation key running: 0 x... 0x........ 0x........ 0x........ 0 x...<--------- activation="">

  ASA # display the keySerial activation number: JMX00000000Running activation key permanent: 0 x - 0 x - 0 x - 0 x - 0 x - x 0.
  Activation key running time: 0 x "' 0 x" ' 0 x "' 0 x" ' 0 x "' 0 x" '

  Licenses required for active/active failover

  #

  The following table shows the licenses required for this function:

  # #

  # Model	# Condition of licence
  # ASA 5505	# No support.
  # ASA 5510 ASA 5512-X	# Security Plus license.
  # All other models	# Base license.

  Conditions of licence for an active failover / standby

  #

  The following table shows the licenses required for this function:

  # #

  # Model	# Condition of licence
  # ASA 5505	# Security Plus license. (Dynamic failover is not supported).
  # ASA 5510 ASA 5512-X	# Security Plus license.
  # All other models

  #

  Base license.

  Active/active failover

  You cannot use the active/active failover and VPN; If you want to use VPN, use active failover / standby.

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/license_standalone/license_management/license.html

  Please note!

  Post edited by: sachin gelin

• Gigabit on ASA 5510

  Hello

  How would we go about setting up the speed of 1000 Mbps in an ASA 5510 with the license "security more?

  That's what I want to say on any interface:

  FW(Config-if) # speed?

  options/commands in interface mode:

  10 operation force 10 Mbps

  Operation of the force 100 Mbps 100

  automatic configuration of the speed to activate AUTO

  Thank you.

  Gabi

  I thhink you should upgrede to 8.0 (3)

  I have asa 5510 with security license.

  Cisco Adaptive Security Appliance Version 7.2 software (3)

  ASA5510(Config-if) #.

  ASA5510 # conf t

  ASA5510 (config) # int e0/0

  ASA5510(Config-if) # spe

  ASA5510(Config-if) # speed?

  options/commands in interface mode:

  10 operation force 10 Mbps

  Operation of the force 100 Mbps 100

  Operation of force 1000 Mbit/s 1000

  automatic configuration of the speed to activate AUTO