ASA help administrator fast password you can

Similar Questions

• Password you can protect folders?

  I know the password, you can protect the files in Microsoft office or iWork applications. But is there a way to password protect entire folders on OS X?

  Thank you

  Click here and follow the instructions. Do not add the image encrypted to the Keychain password.

  
  (141928)

• call of duty 6, I installed and the game is choppy... help me please if you can ty... _

  Why is my jerky game I am running windows 7 whitch is classified in the specifications compatible if you can help I'll b very grateful...

  gajie and jackson369,
  First thing to check is your hardware drivers.  Make sure you have the latest drivers installed for all of your hardware (video, audio, NIC, chipset, etc...).  If you still have a problem then perform a clean boot to verify that no other software is in conflict with the game.  You can also try to lower the video settings in the game and see if it improves it.    Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart 7520 Embedded Web Connect service administrator and password you

  I have a Photosmart 7520 and am trying to use the built-in Web Services to change some settings.

  When I do so a window opens asking me to enter the user and the password. I don't remember setting this up.

  I tried:

  1 user: admin password: [blank]

  2 user: admin password: admin

  3 user: admin password: password

  I repeated the same thing but typed in Admin instead of the admin for the above 3 options.

  None of these work. I have searched everywhere for a solution but nothing.

  I tried to see if I could reset the printer in a State that is then was in when I first unboxed again. The only advice on this for my printer are to press the off button to turn off the printer, unplug, wait a minute and start again. Who has not solved the problem either. The printer completely reset the value by default when it has first been unpacked and none of these options of above user password worked.

  Nothing in the user's manual on this.

  Extremely frustrated after spending three hours of a Sunday in trying to solve this problem. Very bad!

  Please check your Inbox.

• Help me I have a windows vista administrator account, that I can't access

  My son blocked me on entering the wrong password, he said 20 times. What can I do can not update my windows without it

  Thank you

  Hello

  If this is not applicable, you must reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• the windows password of my pc is, I forgot that you can do

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
  MS - MVP - Elephant Boy computers - don't panic!

• unknown user may have reset my administrator and password of the user access.

  Woke up at 3:00 to hear the computer by clicking on, running 2 programs, one was Majic Jack the other did not. went to user accounts to search for an unknown user. Remove the user, VRI.net or something like that, but the first google
  He and found to be a developer software any. restarted after 55 keep me informed but wouldn't show it to them. I also changed the Welcome screen options, then after reboot shows my user name, but won't accept my password. Can it be delivered starting CMD line in mode sans-echec? and more importantly, how to prevent this in the future?

  Whenever someone thinks that their computer has been compromised, I suggest you have a local professional come on site to diagnose and repair. Respectfully, a regular user of the end won't know what to look for and how to secure the computer correctly.

  As for your password:

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. MS - MVP - Elephant Boy computers - don't panic!

• Hi I forgot my apple ID and password what can I do to unlock my phone?

  Hey

  I forgot my apple ID and password

  What can I do to unlock my phone?

  If the iPhone has a Lock activation, and you do not remember your AppleID and the password, you can do anything, but to hold the iPhone back to the next Apple Store with proof of purchase.

  The activation of the locking can be disabled without your AppleID and the password.

  See: find my iPhone Activation Lock - Apple Support

• You can grab a copy of the Original Microsoft operating system?

  HI: My Dell Dimension 3000 had Windows XP Home on my hard drive and it destroys itself.  I bought a new hard drive and he would reinstall from the restore disc.  Unfortunately as it was for many years the restoration dischas moved.  I still have the COA on the side of the machine.  I was wondering if there was a way to get a copy of the Microsoft operating system.  Dell is not any help at all, and "You can call me Bob," says hes sorry I have problems, but this computer is no longer supported.  If I was filthy rich instead of being on disability, I got a new computer.  Thanks for any help.

  Please see: How to request a backup Dell drive

• I only have one user on my computer and it is a standard user, how do I use the administrative user if I can't access my files

  I only have one user on my computer and it is a standard user, how do I change my administrative account if I can't access my files or access my account

  Hello

  1. what happened to your administrator account?

  2. you remember to make changes to the computer recently?

  You will not be able to change your name from standard user to administrator.

  You can try to start in safe mode and check if you can create a new administrator account on here.

  Step 1:

  You can see the following link and start in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can view the following link to create the new user account:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Also check out the link:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope this information is useful.

• Vista administrator privileges is FUBAR, can help you with suggestions.

  OK, so here is the story.

  I have a homemade PC for my teenagers. It became slow and bogged down
  down (they really loaded it with garbage)... then I copied off
  important documents and did a clean install with Windows Vista Edition basic family.

  I created my daughter as the only user (by default).

  After that all updates and things were running, they decided
  that they both wanted to separate accounts, no problem.

  So I made a user for my son, so I thought I better protect this PC a
  little and made myself a user account as well.

  I then used my administrator account by default girls to change user
  parameters and give me administrator privileges.

  I then changed its settings to remove administrator privileges.

  Restart and voila, all together, no?

  Evil.

  The system only allows me to perform administrator functions
  When you are connected to my user account, I have no idea why.

  The worst thing is that it also does not allow my daughters user account
  to have an Administrator privelages.

  Basically, he couldn't give me admin privelages and yet correctly
  removed his admin privelages.

  Therefore, I can't change anything to the computer, cannot be installed
  programs, cannot change all settings, can not update users...

  He won't let me do anything, even if I right click Run as
  Administrator (request a password that does not work using either
  my girls or mine)

  I can not install any programs, as it still does administrator password
  the box pop up asking for a password has no field to enter a.

  I returned and removed the passwords of all users.

  Same problem, it is always ask password when you try to install
  any software or change system settings.

  It won't let me even go back to a restore point, because it requires a password.

  I tried to access the command prompt and enter what is hidden
  files of the administrator.

  Guess what?

  It's true, that it won't let me activate it by one of the user logons
  as said you must have administrator privileges and none of
  make them.

  OK fine, I give up, somehow, I screwed here, to take the pain
  and re-install and go through the hours of reupdating...

  Not so fast, now I found another problem.

  When the computer reboots, the computer sees the keyboard (USB) up to the
  Windows is running.

  Without recognizing the keyboard, I can't interrupt the boot sequence
  to tell it to boot from the CD/DVD drive.

  I am able to enter the BIOS to tell him to just boot from the
  the CD/DVD drive, but it still gives me the option of Vista and the timer starts

  and can not be interrupted as it recognizes not all keyboard commands.

  I found an old USB adapter to PC I had and tried to connect the
  keyboard to that instead of a USB key.

  It doesn't always recognize the keyboard during the initial startup sequence.

  I tried 3 keyboards in all USB slots, same story, is not
  recognize the keyboard, so I can't interrupt the boot upward to install
  of the disc.

  If I let him continue it starts very well Windows Vista and all the
  devices work fine.

  It won't just not let me do the administrative tasks at all.

  Talk about uptight.

  I can not install anything, I can't change anything, and now I can't
  even reinstalling Vista.

  Tell me please that someone has a suggestion that is not too
  technically difficult.

  I need your help if you guessed it!

  Well nothing of such things seems to work, but I got the chance of a solution that I forgot.

  I went back into the BIOS and found that USB keyboard and USB mouse have been disabled, for this is why the keyboard would not work during the boot manager.

  I went and endabled them and then the keyboard would work to let me interrupt the boot upward.

  Now, here's something.

  When I booted in safe mode it put the 'hidden' on the desktop administrator account.

  I have connected to this administrator account and immediately changed each administrator user account.

  Restarted in normal mode and my problem was solved!

  Thanks for the help, hope this answer helps others.

• can anyone help? a friend has forgoton the password on windows 7 ultimate can you please help with the password

  Have a computer laptop windows 7, but the password does not work and I cannot start the computer before opening the window

  Forgotten password:

  You can try a number of things, please see the following articles:

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Or:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Credit: Ronnie Vernon MVP

  If you have an installation of Windows 7 disk, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

• You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  You can help me too? The key that I receive after you have entered the wrong password 3 times is 52309445

  try to enter

  43061481

• You can help me to get the process ID so I can install updates? I am locked out and have tried to change password and opening new account, but it won't let me past the security or open a new account, because I told that I already have a. New password will

  I can't get through the process ID or change password or by opening a new account. I have only 1 e-mail address. How can I get an account that works?

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  If you are still puzzled, you may need to reset the password on your Mac:

  http://support.Apple.com/kb/PH18653

  http://support.Apple.com/kb/PH14325

  http://support.Apple.com/en-us/HT201240

• Problems Vista start up, please help out if you can

  I have a HP Pavilion dv4, vista 64 bit home
  It is only a month
  This problem came out not the case, I stop the machine from the menu start normally
  the next morning I started it upwards to get a box of "Startup Repair" pop up on the screen right away and he said "research issues", then another box pops up saying "Startup Repair cannot repair this computer automatically, sending more information can help microsoft create solutions", then he gives me the choice to send information or not so I clicked Yes to send information about this problem, so it has a box that says "Windows cannot repair this computer automatically and it gives me the possibility to each veiw diagnostic and repair details or view advanced options for system recovery and support, I tried to do a system restore to an earlier date, but he let me only to restore my 'Sytem C»» ":" drive my "Recovery D:" and my "Boot X:" both say "this disc is not in the selected restore point" someone tried to help me find the problem but not lucky I'm able to open a command prompt, if that helps in any way, im in no hurry to fix it because I don't need the computer immediately , but he was sensitive on this subject files that I am really upset if were lost, although I doubt that something wrong with the c: drive it seems that something is wrong with the boot drive, but that's why im here, if the experts can help you as soon as possible it would be greatly appreciated.

  Hello danielingalt89,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and want to save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Have you tried to make the clean boot before installing this update. There could be interference or a program context prevents the installation of this update. If you have please ignore this information.

  Clean boot

  We will also test in a clean boot environment to see if this issue is related to interference from other services / programs:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7 log on to your account.
  ---------------------------------------------------
  Click on start-> all programs-> Windows Update and reinstall the update you mentioned previously.
  ---------------------------------------------------
  To restore your Normal startup:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Normal startup.
  3. When prompted, click on restart.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.