Problems Vista start up, please help out if you can

I have a HP Pavilion dv4, vista 64 bit home
It is only a month
This problem came out not the case, I stop the machine from the menu start normally
the next morning I started it upwards to get a box of "Startup Repair" pop up on the screen right away and he said "research issues", then another box pops up saying "Startup Repair cannot repair this computer automatically, sending more information can help microsoft create solutions", then he gives me the choice to send information or not so I clicked Yes to send information about this problem, so it has a box that says "Windows cannot repair this computer automatically and it gives me the possibility to each veiw diagnostic and repair details or view advanced options for system recovery and support, I tried to do a system restore to an earlier date, but he let me only to restore my 'Sytem C»» ":" drive my "Recovery D:" and my "Boot X:" both say "this disc is not in the selected restore point" someone tried to help me find the problem but not lucky I'm able to open a command prompt, if that helps in any way, im in no hurry to fix it because I don't need the computer immediately , but he was sensitive on this subject files that I am really upset if were lost, although I doubt that something wrong with the c: drive it seems that something is wrong with the boot drive, but that's why im here, if the experts can help you as soon as possible it would be greatly appreciated.

Hello danielingalt89,

Thank you for visiting the website of Microsoft Windows Vista Community.

Try the rest of the stage in this article:

System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

Restore Windows Vista to a previous state

In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

1 screen of system restore

By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

2. the list of available restore points

You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

3. confirm the selected restore point

If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

4. second Confirmation

If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

5. restoration of a restore point

When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

6. system restore was successful

If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

7 undo the last system restore

Your computer should now work correctly again.

With the help of the restoration of the system in the Windows recovery environment

Manual creation of Restore Points

As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and want to save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

8. the System Protection tab

To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

9. Enter the manual restore point title

Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

10. Manual restore point has been created

Now that you have finished doing the manual restore point, you can close the system window.

Have you tried to make the clean boot before installing this update. There could be interference or a program context prevents the installation of this update. If you have please ignore this information.

Clean boot

We will also test in a clean boot environment to see if this issue is related to interference from other services / programs:
1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7 log on to your account.
---------------------------------------------------
Click on start-> all programs-> Windows Update and reinstall the update you mentioned previously.
---------------------------------------------------
To restore your Normal startup:
1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
2. in the general tab, click Normal startup.
3. When prompted, click on restart.

This should solve your problem.

Let us know if these steps solve your problem.  I hope the information is useful.

Kind regards

Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • PC continues to plant at an exponential rate! Windows blue screen error with the OS Version: 6.1.7601.2.1.0.768.3 & locale ID: 1033. Please, Please HELP me, if you can!

    I tried to solve the problem for 77 hours in a row - no sleep, or what anyone else - but little matter what I do, my PC guard crashing & gets worse! Please, someone, anyone, please help me! I was unable to determine what is the problem, and even less how to solve below I have included the automation Windows Recovery Wizard Info., related to my technical problems. the most recent two system crashes/blue screen overlays; Also, thank you so much, in advance.

    Signature of the problem:

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 1033

    More information about the problem:

    BCCode: a

    BCP1: FFFF80001B033200

    BCP2: 0000000000000002

    BCP3: 0000000000000000

    BCP4: FFFFF80002EC0FF8

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\111815-9921-01.dmp

    C:\Users\Nathan\AppData\Local\Temp\WER-31075-0.SysData.XML

    Signature of the problem:

    Problem event name: BlueScreen

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 1033

    More information about the problem:

    BCCode: a

    BCP1: FFFFFA801D5CF370

    BCP2: 0000000000000002

    BCP3: 0000000000000001

    BCP4: FFFFF80002F46626

    OS version: 6_1_7601

    Service Pack: 1_0

    Product: 768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\111815-10264-01.dmp

    C:\Users\Nathan\AppData\Local\Temp\WER-34866-0.SysData.XML

    Read our privacy statement online:

     http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    As stated in the wiki, you must download the files dmp verified on a disk (or any file sharing site) and we give a link to the files in your next post.

  • I don't know how I can attach files and photos, but now hotmail does not work, click on attach ways and nothing happens, I use hotmail, firefox, vista, hp. Please help me

    but now Hotmail does not work, I can't join because the browser will not open click on attach ways and nothing happens, I use hotmail, firefox, vista, hp. Please help me

    Hello

    for Firefox questions, ask in their forums:

    http://support.Mozilla.com/en-us/forums

    _____________________________________________________

    Hotmail questions:

    I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

    Please repost your question in hotmail in the hotmail link below forums

    http://windowslivehelp.com/product.aspx?ProductID=1

    Forums

  • Hello I am a photographer of Canon.  I use Bridge (CS5) to process my raw to JPEG files.  I take on a second photographer who shoots Nikon (D800) and I'm not currenty able to see or treat his images.  Can you please help?  Thank you!

    Hello I am a photographer of Canon.  I use Bridge (CS5) to process my raw to JPEG files.  I take on a second photographer who shoots Nikon (D800) and I am not currently able to see or treat his images.  Can you please help?  Thank you!

    CS5 to create problems to update the menu help.  Best to download and install manually.

    http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=5373&FILEID=4999

    Another problem with CS5 was the Bridge opens as a process in the background and must be closed in the taskbar > hidden icons before updating.

    Good luck

    In fact, you have had a chance, I'm surprised that the D800 goes back to CS5 and ACR6.7

  • Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

    Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

    Please help me...
    I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
    now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.
    If you have an administrator password in windows, then the recovery console would need in order to log in the disk system, i.e. the c prompt.
     
    If you tried to do a repair with the cd, then it may not have worked if your cd is the sp2 version of windows on your computer has been updated to sp3 version.  for the sp2 of xp cd works, you will need to uninstall the update to sp3 via Add/Remove programs.
     
    so, now that you have enslaved the hard drive on another computer, you will need to do is try to take ownership of the files/folders:
     
     

    --
    db·´¯`·...¸><)))º>

    .

    "honeymtrk" wrote in message news: d1c5394d-1aad-4f12-bd12-bc4b485bc596...
    Please help me. How can I unlock my administrator account while accessing this form another hard drive. ?

    Please help me...
    I use windows xp svc pack 3. some how it gets corrupted now and all my important data is in the folder my documents on my desk. I got my account with a password. I tried to repair my widows through the recovery console, but I was unable to open a session in my Windows through this procedure just stuck computer is there. even when I tried to fix it through the installation of windows, Setup also stuck on the step where it says "in search for earlier versions of windows."
    now, I tried to copy the data by accessing another operating system on another hard drive but when I opened my account administrator located in the documents and settings folder, it says access is denied. I really need that data on these files is very important to me.

    DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

  • Need of freeware program that can format/reformat a disc SATA0 - please help. Thank you!

    Need software freeware that can format/reformat a disc SATA0 - vendor: WDC
    WD7501AALS-75J7B0 on a Dell Studio 540 desktop, where all the disk space will be
    unpartitioned space C drive:-Please help. Thank you!

    You can use WD Data Lifeguard (free download from WD) to make this work.

  • How to reformat DV2500 HP without the recovery disk? my recovery disk went please help me thank you

    How to reformat DV2500 HP without the recovery disk? my recovery disk went T_T PLEASE help me thank you

    jamboy16 wrote

    How to reformat DV2500 HP without the recovery disk? my recovery disk went T_T PLEASE help me thank you

    If your goal is to reinstall the operating system there are ways to achieve

    We need to tap the F11 key immediately after presswing the laptop power button. Who will call the Recovery Manager unless you have deleted the recovery partition or have done something to the original disk partition scheme. In the Recovery Manager simply choose to recover your PC for the original operating system

    Alternatively, you can order a set of HP recovery disks.

    Best regards

    ERICO

  • I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

    I have a site published under a recent URL, I used for a personal site and the site displayed the URl needs to be removed, but I can't take it down because I do not know the account info that it is under please help! Thank you!

    If it is hosted with Adobe Business Catalyst Adobe Support can help you.

    If it is hosted elsewhere the only people who can help you with that is where it is hosted.

  • Please add the option of power/link to download new pdfs with editing in the browser. I have a restaurant customer who is constantly updating their menu! Please help so that they can do it themselves!

    Please add the option of power/link to download new pdfs with editing in the browser. I have a restaurant customer who is constantly updating their menu! Please help so that they can do it themselves!

    Not the answer you want, but you could set up your quick customer with an ftp upload which would replace the existing pdf. I use Transmit and it would allow your customer to simply drag and drop on a folder.

  • Hi, I have 3 movies (860 MB 950 mb 1, 750 MB) I try to 4.7 Gb Cd in again that it alerts you need more than 7 GB of space! Please help me how I can do? Thank you

    Hi, I have 3 movies by (860 + 950 MB + 1, 750 MB) I try to 4.7 Gb Cd in again that it alerts you need more than 7 GB of space! Please help me how I can do? Thank you

    The files must be legal DVD or still to retranscode them. If so, it will use "automatic" (in which case it should adapt), or settings you have applied.

    Look at assets in the project Panel and columns for the status of transcoding DVDs and transcoding DVD setting. What did he say? Or better, post a screenshot.

    try to make 4.7 Gb Cd

    I assume you mean DVD.

  • No printer Listed Port - can't get any printer to install on Windows Vista Home Premium - Please HELP!

    I was able to print to a Hp Officejet 4215 with no problems and a brother and then printer started to save as offline and would not print. Uninstalled all printers and tried to install a new HP Officejet 6310 printer. Ran the install disc included, but would get the message error, is went to the HP site and downloaded the driver, still received the error msg - Windows found a driver software for your device but encountered an error trying to install it. The specified port is unknown. and installation of the device software has no error. I went into control panel / Device Manager / USB controller group / and tried to uninstall - restarted the pc and still no luck. When I go to the control panel and try to install a printer, there is no port printer not listed and I can't add a new port.  I have connected the printer to another laptop running Windows Vista and recognized the new printer and installed the drivers and the impressions very well, but this laptop will not load the drivers. Help, please... Im a university student and desperately need to print!

    Hello

    All ports are used, and this is the reason why the installation goes through. We can uninstall these devices that are not in use and then try to reinstall the printer. Here's how:
    a. start, point to all programs, point to Accessories, and then click command prompt.
    b. at a command prompt, type the following command and press ENTER:
    Set devmgr_show_nonpresent_devices = 1
    c. type the following command a command prompt and press ENTER:
    Start devmgmt.msc
    d. troubleshoot the devices and drivers in Device Manager.
    NOTE: Click Show hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.
    e. now navigate in imaging devices and then Device Manager expand it. Check if there are any devices that are not highlighted or blurred. Right-click on these devices and choose uninstall.
    f. repeat the same Universal Serial Bus controllers also.
    g. now try to install the printer.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • cannot play an online game because my video card does not support shader model. generally work started recently please help

    usually, I play a game called League of legends online and last night I tried to get into a game and got an error message that reads. DirectX error check and make sure that your video card supports shader 2.0 model and uses drivers from the manufacturer. I've played a few games yesterday but it was all of a sudden when it stopped to let me play. Help, please. Thank you

    Hi Casey,.

     
     
    1. do you use Internet Explorer to play games online?
    2. If so, what is the version of Internet Explorer installed on your computer?
    3. have you made changes to your computer recently?
    4 are you facing this problem only with shader model 2.0?
     
    If you use Internet Explorer to play games online, I suggest you to follow the steps and check if it helps.
     
     
    Method 1: Follow the link and check if that helps.
    The problems of games online using Internet Explorer
     
     
    Method 2: You can also check out the link and check if it helps.
    Run the DirectX Diagnostic tool
     
     
    Method 3: Update cheque and card video if this can help.

  • BEX / BEX64 problem event name. PLEASE HELP ME...

    I had this problem for the last two weeks and the same message appears ".exe has stopped working". Windows cannot open my MW2 single player or multiplayer file, The Witcher 3 Wild Hunt or GTA 5. He started only with MW2 and then more games like GTA and The Witcher has stopped working over time. The Witcher and put GTA BEX64 developed.  I read solutions online including DEP (prevention of data mining) troubleshooting, assessories - command prompt, check all the drivers updated, game compatibility, etc. Who fail to solve the problem. Please help me as soon as POSSIBLE!

    BTW, I know these games work first hand I played all these games above all of a sudden no longer responds.

    Modern Warfare 2

    Problem event name: BEX
    Application name: iw4mp.exe
    Application version: 0.0.0.0
    Application timestamp: 55d37e9e
    Fault Module name: StackHash_4c0d
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 80000008
    Exception code: c0000005
    Exception data: 00000008
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional information 1: 4c0d
    More information 2: 4c0d4d78887f76d971d5d00f1f20a433
    3 more information: 4c0d
    Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433

    The Witcher 3 Wild Hunt

    Problem event name: BEX64
    Application name: witcher3.exe
    Application version: 3.0.7.2515
    Application timestamp: 56995fe3
    Fault Module name: StackHash_0584
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 000007fefbbb3d20
    Exception code: c0000005
    Data of the exception: 0000000000000008
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Information additional 1:0584
    More information 2: 05844721ba6f46935da4f741075b96d8
    Additional information 3: cfd7
    Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

    GTA 5

    Problem event name: BEX64
    Application name: GTA5.exe
    Application version: 1.0.678.1
    Application timestamp: 56e2b38c
    Fault Module name: StackHash_0584
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception offset: 000007fefbbb3d20
    Exception code: c0000005
    Data of the exception: 0000000000000008
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Information additional 1:0584
    More information 2: 05844721ba6f46935da4f741075b96d8
    Additional information 3: cfd7
    Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5

    System specs

    Windows 7 64 bit

    i5 4690 K

    GTX 980 4 GB

    ASRock Z97 Extreme 4

    Samsung 500GB SSD

    3 TB hard drive

    PSU Corsair 850 RM

    Corsair 16 GB of Ram

    Thank you

    Cody Carroll

    The Module 'fault' is not positively identified as:

    Fault Module name: StackHash_4c0d
    Fault Module version: 0.0.0.0

    It can help to see al the modules that are loaded in a collision.

    You can download and run the following application (AppCrashView):

    http://www.NirSoft.NET/utils/app_crash_view.html

    Click on one of the recent errors GTA5.exe.

    Can you copy and paste the information that appears in the lower window that loaded modules.

    Do the same for a mistake witcher3.exe and iw4mp.exe.

  • weird problem with new screen, please help

    Hello people,

    I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.

    This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.

    I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.

    Monitor: monitor LCD Compaq CQ1859

    Do I something pressed or clicked on something by accident?

    Is there a setting some part that I forgot?

    I plan to cast the spell by the window, its really annoying.

    Please help guys and ladies.

    Hello salamander.

    Please contact Microsoft Community.

    I can understand the inconvenience caused, be assured that we are here to help with your concern.

    1. What is the model of the computer and do ?
    2. Do you see an error message when the menu bar is transparent?

    Please follow the link below and include a screenshot in your post,

    http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

    I suggest you follow the methods below to see if it helps.

    Method 1:

    Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

    http://support.Microsoft.com/kb/929135

    Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

    Note: If the problem persists, continue with method 2

    Method 2:

    Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.

    1. Right-click on a vacuum of space on the desktop and click on personalize.
    2. Click on the link to the color of the window at the bottom of the window.
    3. Uncheck the check box enable transparency to disable transparency and check the issue.

    For more information, aero feature please refer to the link below.

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience

    Note: If the problem persists, continue with method 3

    Method 3:

    A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

    • Run the scanner from Microsoft from the link below:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    • Click on download now and click Run.
    • Choose complete system scan and wait for the full analysis.

    Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    The above information was hoping to get useful, please return it to us if you need additional assistance.

  • BlackBerry Smartphones phone new problem... Please help urgently...

    Hello...

    I really need a help that expert on black berry 9810. I am a new blackberry user by the way. So now the problem is...

    I can't configure my phone because it always came to ask me upgrade my data plan. In addition to this, sound out always asking me to connect to the network while my phone is connected to the network.

    Please help thanks me...!

    Hello ccarthine

    Welcome to the Forums of the BlackBerry Support

    We need BlackBerry data Plan to access most application on our Mobile network / BIS our carrier, a normal data plan will not provide you these features.

    Then, contact your carrier or Wireless service provider to find out if your account is configured with the BIS.

Maybe you are looking for