ASA - NG IPS inspect encrypted traffic

Similar Questions

• VPN Site-to-Site with IPS Inspection

  Hello friends,

  A simple question:

  Its possible to have IPS inspection (software IPS in the family X, not the SSM module) with the Site to Site VPN environment?

  In other words, can I use firewall with VPN IPS inspection in the same?

  Rafael

  Yes, site to site traffic can be inspected with the IPS module. Only clientless SSL-VPN-traffic cannot be inspected by IPS.

  Sent by Cisco Support technique iPad App

• VPN; list of access on the external interface allowing encrypted traffic

  Hi, I have a question about the access list on the external interface of a router 836. We have several routers on our clients site, some are lan2lan, some are client2router vpn.

  My question is; Why should I explicitly put the ip addresses of the client vpn or tunnel lan to the access list. Because the encrypted traffic to already allowing ESPs & isakmp.

  The access list is set to the outgoing interface with: ip access-group 102 to

  Note access-list 102 incoming Internet via ATM0.1

  Note access-list 102 permit IP VPN range

  access-list 102 permit ip 192.123.32.0 0.0.0.255 192.123.33.0 0.0.0.255

  access-list 102 permit ip 14.1.1.0 0.0.0.255 any

  access-list 102 permit esp a whole

  Note access-list 102 Open VPN Ports and other

  access-list 102 permit udp any host x.x.x.x eq isakmp newspaper

  I have to explicitly allow 192.123.32.0 (range of lan on the other side) & 14.1.1.0 (range of vpn client) because if I'm not I won't be able to reach the network.

  The vpn connection is not the problem, all traffic going through it.

  As far as I know, allowing ESPs & isakmp should be sufficient.

  Can anyone clarify this for me please?

  TNX

  Sebastian

  This has been previously answered on this forum. See http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.ee9f970/0#selected_message for more details.

• SSM-40 IPS inspects traffic

  Hello

  I have an asa 5520 with AIP-SSM-40

  I did the configuration of basic on the MSS and I was ok until I decided to forward traffic to IPS.

  I use the service on ASA-> Firewall-> rules of policy strategy and add a rule for IPS

  the rule has been added to the policy of Global Service with custom ACL.

  After that I enabled the interface on vs0 and this is my configuration

  ====

  now the problem is: I don't have any (log in real time) newspaper in IME

  I think that my IP is not working properly.

  Please help me to solve the problem, thx

  Hello

  Can you try to enable Signatures for:

  -GIS ICMP Id: 2000-2004 on IPS

  -Define the event Action as products alert

  -Try to pass by IPS ICMP traffic and see if events cause.

  Check also on the EMI:

  -If you have selected the name of sensor in the event Monitoring (right most side)

  -Try to remove the threat of note (if no display)

  -Select the time in real-time and apply them.

  Please let me know if you have any questions about it.

  Kind regards

  Akshay Rouanet

• Inspection of traffic between hair-pinning VPN on a SAA with AIP SSM.

  Hello

  I want to deploy an ASA as a VPN endpoint and to use the AIP SSM module to inspect and provide protection for inbound traffic arriving on a VPN and start on another within the same ASA. I guess it's possible because traffic is unencrypted in the ASA State and must be intercepted by the class plan. Anyone who has done this or can anyone confirm that this will work?

  Thank you very much

  Wil Bowes

  If the ASA finishes the VPN, then indeed it can also inspect internally. The decryption happens before "module controls" for inbound traffic and the arrival of "control module" before encryption for outgoing traffic. If you can do it.

  I hope it helps.

  PK

• ASA-SSM-10 inspection load 100% (version 7.0 (5 a) E4)

  Hi all

  I have a challenge with the IPS module in ASA5520, ASA-SSM-10. When we start a try to connect to Web servers, I get a load of 100% inspection and will slow down the traffic/performance.

  We test with 63000 sessions per minute making a load of: the test-servers (clients) on the web servers of 20,000 Kbps and traffic from servers web-back to the test-servers (clients) 75.000 kbits/sec.

  Can you please advise what to do because we cannot live with this environment only when this is fixed.

  Thanks in advance,

  Erik Verkerk.

  We have not used charge of inspection in order to determine the appropriate sensor performance, instead, we have relied on "percentage of failed package" reported by the sensor. When the sensor gets into trouble, that they will begin to run out of packets for inspection, this causes the sensor wrong determination of the TCP State for some of the connections. This causes the sensor to use more resources than necessary to inspect traffic, leading to lack more packages.

  It is its called the "death spiral" and we try to avoid it as much as possible.

  Cisco has a long and proud history of providing performance numbers 'blue sky' for their products. We used to refresh their numbers of performance of the IPS sensor by half, but they made improvements over the years and now we take only about 1/3 wide of reported values. You can see for yourself with real, live production traffic.

  I'm havn; t found the number of signatures in a meaningful way sensor effect performance unless you touch abnormally difficult or lit a large number or tuned to perform many actions per second.

  -Bob

• S2S VPN Asa 5510 to 5505 no traffic passing (hair Pulling)

  I have one site to another configured between a 5505 and ASA 5510, the tunnel is in place but can not pass any traffic one way or another. A 5510, 8.4.3 while the 5505 was 8.2. I find the version 8.2 the less confusing when configure the VPN. The new NAT throws me for a loop on the 5510. I have 1 tunnel upward and will already and it works fine. But when I do a new online, it won't pass any traffic.

  The traffic I'm EFS is 5510 (192.168.180.0/24, 172.25.11.0/24)<-------> 5505 (192.168.197.0/24) many thanks in advance!

  Here's the configs for the two.

  main site of 5510

  ASA Version 8.4(3) ! hostname ASA5510 domain-name fphc.us enable password dmbm8Lq9pBST.0kk encrypted passwd dmbm8Lq9pBST.0kk encrypted names ! interface Ethernet0/0 nameif Outside security-level 0 ip address x.x.x.130 255.255.255.240 ! interface Ethernet0/1 nameif Inside security-level 100 ip address 192.168.180.253 255.255.254.0 ! interface Ethernet0/2 speed 100 duplex full shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 no ip address management-only ! boot system disk0:/asa843-k8.bin ftp mode passive clock timezone CST -6 clock summer-time CDT recurring dns domain-lookup Inside dns server-group DefaultDNS name-server 192.168.180.231 name-server 192.168.180.232 name-server 192.168.180.233 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj-192.168.180.0 subnet 192.168.180.0 255.255.254.0 object network obj-192.168.188.0 subnet 192.168.188.0 255.255.255.0 object network obj-216.86.7.128 subnet x.x.x.128 255.255.255.240 object network Mobile_Unit subnet 192.168.193.0 255.255.255.0 object network obj-172.27.0.0 subnet 172.27.0.0 255.255.255.0 object network obj_any subnet 0.0.0.0 0.0.0.0 object network obj-172.25.11.0 subnet 172.25.11.0 255.255.255.0 object network obj-172.35.0.0 subnet 172.35.0.0 255.255.254.0 object network SpamBox_1 host 192.168.180.244 object network SpamBox_2 host 192.168.180.248 object network Exchange host 192.168.180.235 object network PMG subnet 192.168.178.0 255.255.255.0 object network Outside_Gateway host x.x.x.129 object network AHCCN subnet 172.35.0.0 255.255.254.0 object network MM subnet 10.90.254.0 255.255.255.0 object network NETWORK_OBJ_172.27.0.0_25 subnet 172.27.0.0 255.255.255.128 object network NETWORK_OBJ_172.27.0.0_26 subnet 172.27.0.0 255.255.255.192 object network obj-172.35.1.199 host 172.35.1.199 object network obj-192.168.51.5 host 192.168.51.5 object service 6004 service udp destination eq 6004 object network AT_Remote subnet 192.168.197.0 255.255.255.0 object-group service DM_INLINE_SERVICE_2 service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp-udp destination eq www object-group network DM_INLINE_NETWORK_1 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_2 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_3 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_16 network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object source-quench object-group network DM_INLINE_NETWORK_5 network-object object AHCCN network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_6 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_4 service-object icmp service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_5 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_6 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_0 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp service-object tcp-udp destination eq domain service-object object 6004 object-group network DM_INLINE_NETWORK_7 network-object object MM network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_8 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group service DM_INLINE_SERVICE_7 service-object tcp-udp destination eq domain service-object object 6004 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp object-group network DM_INLINE_NETWORK_10 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group network DM_INLINE_NETWORK_9 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_11 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_1 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group network DM_INLINE_NETWORK_13 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_14 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_12 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_3 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service DM_INLINE_SERVICE_8 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service Exchange-6001 udp port-object range 6001 6004 object-group network DM_INLINE_NETWORK_15 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_10 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_9 service-object ip service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp destination eq citrix-ica service-object tcp destination eq www service-object tcp destination eq https object-group network DM_INLINE_NETWORK_18 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_19 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_20 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_17 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_10 object PMG access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_1 192.168.188.0 255.255.255.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_7 object obj-172.27.0.0 access-list Outside_1_cryptomap extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_14 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object AT_Remote object-group DM_INLINE_NETWORK_15 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any any access-list Outside_access_in extended permit ip object Mobile_Unit object-group DM_INLINE_NETWORK_12 log debugging access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_7 object PMG object-group DM_INLINE_NETWORK_8 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_0 any object Exchange access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object SpamBox_1 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object SpamBox_2 access-list Outside_access_in extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_2 access-list Outside_access_in extended deny ip 127.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 10.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 169.254.0.0 255.255.0.0 any log access-list Outside_access_in extended deny ip 224.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 239.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 173.0.0.0 255.0.0.0 any log debugging access-list Outside_access_in extended deny ip 224.0.0.0 255.255.255.31 any access-list Outside_access_in extended deny ip 192.168.0.0 255.255.0.0 any access-list Outside_access_in extended deny ip any any access-list global_mpc extended permit ip any any access-list global_access extended permit udp object obj-172.35.1.199 any eq snmp log disable access-list global_access extended permit ip object obj-172.27.0.0 any access-list splitTunnelAcl standard permit 192.168.180.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.35.0.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.25.11.0 255.255.255.0 access-list splitTunnelAcl standard permit 10.90.254.0 255.255.255.0 access-list Outside_cryptomap_1 extended permit ip object PMG object-group DM_INLINE_NETWORK_13 access-list Inside_access_in extended permit ip object obj_any any access-list Inside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log disable access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Exchange any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_1 object SpamBox_1 any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_3 object SpamBox_2 any log access-list Inside_access_in extended deny ip any any access-list Outside_cryptomap_2 extended permit ip object-group DM_INLINE_NETWORK_17 object AT_Remote access-list Outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_18 object PMG log access-list Outside_cryptomap_4 extended permit ip object-group DM_INLINE_NETWORK_3 object Mobile_Unit pager lines 24 logging enable logging timestamp logging emblem logging rate-limit unlimited level 1 logging rate-limit unlimited level 6 logging rate-limit unlimited level 7 mtu Outside 1500 mtu Inside 1500 mtu management 1500 ip local pool Client_Pool 172.27.0.50-172.27.0.100 mask 255.255.255.0 ip local pool RA_POOL 172.27.0.1-172.27.0.49 mask 255.255.255.0 ip verify reverse-path interface Outside ip verify reverse-path interface Inside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any Outside icmp permit any Inside asdm history enable arp timeout 14400 nat (Inside,Outside) source static DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_9 destination static PMG PMG no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_20 DM_INLINE_NETWORK_20 destination static AT_Remote AT_Remote no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_5 DM_INLINE_NETWORK_5 destination static NETWORK_OBJ_172.27.0.0_25 NETWORK_OBJ_172.27.0.0_25 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_16 DM_INLINE_NETWORK_16 destination static NETWORK_OBJ_172.27.0.0_26 NETWORK_OBJ_172.27.0.0_26 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 destination static obj-192.168.188.0 obj-192.168.188.0 no-proxy-arp nat (Inside,Outside) source static DM_INLINE_NETWORK_19 DM_INLINE_NETWORK_19 destination static Mobile_Unit Mobile_Unit no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_11 DM_INLINE_NETWORK_11 destination static AT_Remote AT_Remote no-proxy-arp route-lookup ! object network obj_any nat (Inside,Outside) dynamic interface object network SpamBox_1 nat (Inside,Outside) static x.x.x.132 object network SpamBox_2 nat (Inside,Outside) static x.x.x.133 object network Exchange nat (Inside,Outside) static x.x.x.131 dns access-group Outside_access_in in interface Outside access-group Inside_access_in in interface Inside access-group global_access global route Outside 0.0.0.0 0.0.0.0 x.x.x..129 1 route Inside 10.90.254.0 255.255.255.0 192.168.180.1 1 route Inside 172.16.200.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.10.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.11.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.12.0 255.255.255.0 192.168.180.200 1 route Inside 172.27.0.0 255.255.255.0 192.168.180.200 1 route Inside 172.29.0.0 255.255.0.0 192.168.180.200 1 route Inside 172.35.0.0 255.255.254.0 192.168.180.200 1 route Inside 192.168.182.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.183.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.184.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.185.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.186.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.187.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.189.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.190.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.191.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.192.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.194.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.195.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.196.0 255.255.255.0 192.168.180.200 1 timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server DC's protocol radius max-failed-attempts 5 aaa-server DC's (Inside) host 192.168.180.231 timeout 5 key ***** user-identity default-domain LOCAL http server enable http 192.168.180.0 255.255.255.0 Inside http 0.0.0.0 0.0.0.0 Inside http 172.27.0.0 255.255.255.0 Outside http 172.27.0.0 255.255.255.0 Inside snmp-server group Authentication&Encryption v3 priv snmp-server user trap Authentication&Encryption v3 encrypted auth md5 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78 priv 3des 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78:08:c6:ef:b2:7e:89:45:f2:6f:78:b5:01:33:47:68:c9 snmp-server host Inside 172.35.1.199 community ***** version 2c snmp-server host Inside 192.168.180.7 community ***** version 2c snmp-server location MLK snmp-server contact xxxxxxxx snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart snmp-server enable traps syslog snmp-server enable traps ipsec start stop snmp-server enable traps entity config-change fru-insert fru-remove snmp-server enable traps remote-access session-threshold-exceeded snmp-server enable traps cpu threshold rising snmp-server enable traps ikev2 start no sysopt connection reclassify-vpn sysopt connection preserve-vpn-flows crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association lifetime seconds 43200 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map Outside_map 1 match address Outside_1_cryptomap crypto map Outside_map 1 set peer 173.10.204.46 crypto map Outside_map 1 set ikev1 phase1-mode aggressive crypto map Outside_map 1 set ikev1 transform-set ESP-3DES-SHA crypto map Outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 1 set ikev2 pre-shared-key ***** crypto map Outside_map 1 set security-association lifetime seconds 460800 crypto map Outside_map 4 match address Outside_cryptomap_1 crypto map Outside_map 4 set peer 207.190.237.254 crypto map Outside_map 4 set ikev1 phase1-mode aggressive group5 crypto map Outside_map 4 set ikev1 transform-set ESP-AES-128-SHA crypto map Outside_map 4 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 4 set security-association lifetime seconds 460800 crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map 1 match address Outside_cryptomap_2 crypto map outside_map 1 set peer x.x.x.201 crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 match address Outside_cryptomap crypto map outside_map 2 set peer x.x.x.254 crypto map outside_map 2 set ikev1 phase1-mode aggressive group5 crypto map outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map outside_map 3 match address Outside_cryptomap_4 crypto map outside_map 3 set peer x.x.216.130 crypto map outside_map 3 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface Outside crypto ca trustpoint LOCAL-CA-SERVER keypair LOCAL-CA-SERVER crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=FPHC-ASA serial-number keypair LOCAL-CA-SERVER crl configure crypto ca server shutdown crypto ca certificate chain LOCAL-CA-SERVER certificate ca 01     308201ff 30820168 a0030201 02020101 300d0609 2a864886 f70d0101 05050030     13311130 0f060355 04031308 46504843 2d415341 301e170d 31323039 32303232     34393034 5a170d31 35303932 30323234 3930345a 30133111 300f0603 55040313     08465048 432d4153 4130819f 300d0609 2a864886 f70d0101 01050003 818d0030     81890281 8100e841 eeca425c 20c47a19 3b335924 30281111 cff571d7 0bb63dd8     5f3194f5 59d99cb1 60269694 aa13c591 505e0575 2de5ebb1 92d7c931 807f807b     6e84ee54 1da4ccaf 1f109f53 94c6e567 a8064e27 e27f3ea0 94f7bf32 2fe6064c     c2bbcd0d 7b0f8806 8614fcf9 80c6e4e1 83da75c5 080c7117 09e1d574 f17de8ac     1da4f2f9 f6e10203 010001a3 63306130 0f060355 1d130101 ff040530 030101ff     300e0603 551d0f01 01ff0404 03020186 301f0603 551d2304 18301680 144cb3da     6b6a5a14 c4b78674 49609b6b 8e58ea5f a3301d06 03551d0e 04160414 4cb3da6b     6a5a14c4 b7867449 609b6b8e 58ea5fa3 300d0609 2a864886 f70d0101 05050003     818100e0 7c9e15c3 13068614 788ff4d3 f282a4f4 fde72b00 3b05748f 0a4f68ec     6a7eb5fb 40c6d505 b1c35372 87102173 bb017e4b 2697c8f5 b66395f2 1418c77c     3e959343 84674b96 33558a08 629336c8 39c742bf 6b727b00 388a7102 8619cb5a     e4227aaf b58e267c 9e8b23d6 94cdc789 eb29cd96 1e579770 a2aa58ab 40694bb9 12888d   quit crypto ca certificate chain ASDM_TrustPoint0 certificate bd555b50     308201f7 30820160 a0030201 020204bd 555b5030 0d06092a 864886f7 0d010105     05003040 3111300f 06035504 03130846 5048432d 41534131 2b301206 03550405     130b4a4d 58313632 33583130 51301506 092a8648 86f70d01 09021608 46504843     2d415341 301e170d 31323039 32303232 35383434 5a170d32 32303931 38323235     3834345a 30403111 300f0603 55040313 08465048 432d4153 41312b30 12060355     0405130b 4a4d5831 36323358 31305130 1506092a 864886f7 0d010902 16084650     48432d41 53413081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902     818100e8 41eeca42 5c20c47a 193b3359 24302811 11cff571 d70bb63d d85f3194     f559d99c b1602696 94aa13c5 91505e05 752de5eb b192d7c9 31807f80 7b6e84ee     541da4cc af1f109f 5394c6e5 67a8064e 27e27f3e a094f7bf 322fe606 4cc2bbcd     0d7b0f88 068614fc f980c6e4 e183da75 c5080c71 1709e1d5 74f17de8 ac1da4f2     f9f6e102 03010001 300d0609 2a864886 f70d0101 05050003 8181008b c7a3e119     f1c6f60c 56ab7fd4 5096cfdf abb44331 fe3a0249 7f5fe79b 38a044c2 9a8b907d     12feba5d 6298a414 c4973369 040585b8 26b8b29e dfe7e226 0b10d08e 03658648     2fb0233e 27204339 c5a1c270 a0fec5b4 834340ac 9afefe75 4f802cb6 fb21b89c     9016e32c 2e772c00 191d23e0 036c4321 93a43b48 a6b682af 5dd5c0   quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable Outside crypto ikev1 enable Outside crypto ikev1 enable management crypto ikev1 policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 192.168.180.0 255.255.255.0 Inside telnet 172.27.0.0 255.255.255.0 Inside telnet timeout 10 ssh 192.168.180.0 255.255.255.0 Inside ssh 172.27.0.0 255.255.255.0 Inside ssh timeout 20 console timeout 0 management-access Inside vpn load-balancing interface lbpublic Outside interface lbprivate Inside threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp authenticate ntp server 50.77.217.185 source Outside prefer ntp server 216.171.120.36 source Outside webvpn group-policy "S2S-RA-Group Policy" internal group-policy "S2S-RA-Group Policy" attributes vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client group-policy DfltGrpPolicy attributes vpn-filter value Inside_nat0_outbound vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless group-policy GroupPolicy_x.x.x.46 internal group-policy GroupPolicy_x.x.x.46 attributes vpn-filter value Outside_1_cryptomap vpn-tunnel-protocol ikev1 ikev2 group-policy GroupPolicy_x.x.x.254 internal group-policy GroupPolicy_x.x.x.254 attributes vpn-filter value Outside_cryptomap_1 vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec group-policy GroupPolicy_x.x.x.201 internal group-policy GroupPolicy_x.x.x.201 attributes vpn-filter value Outside_cryptomap_2 vpn-tunnel-protocol ikev1 group-policy GroupPolicy_x.x.216.130 internal group-policy GroupPolicy_x.x.216.130 attributes vpn-tunnel-protocol ikev1 group-policy VPN-GROUP2 internal group-policy VPN-GROUP2 attributes dns-server value 192.168.180.231 192.168.180.232 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us group-policy VPN-GROUP internal group-policy VPN-GROUP attributes dns-server value 192.168.180.231 192.168.180.232 vpn-filter value splitTunnelAcl vpn-tunnel-protocol ikev1 l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us username mark password YTp0IwzeNwb5kS8J encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes default-group-policy VPN-GROUP tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 general-attributes default-group-policy GroupPolicy_x.x.x.46 tunnel-group x.x.x.46 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group x.x.x.201 type ipsec-l2l tunnel-group x.x.x.201 general-attributes default-group-policy GroupPolicy_x.x.x.201 tunnel-group x.x.x.201 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group VPN-GROUP type remote-access tunnel-group VPN-GROUP general-attributes address-pool Client_Pool authentication-server-group DC's default-group-policy VPN-GROUP tunnel-group VPN-GROUP ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.254 type ipsec-l2l tunnel-group x.x.x.254 general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group x.x.x.254 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group VPN-GROUP2 type remote-access tunnel-group VPN-GROUP2 general-attributes address-pool RA_POOL authentication-server-group DC's default-group-policy VPN-GROUP2 tunnel-group VPN-GROUP2 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_x.x.x.130 tunnel-group x.x.x.130 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group PMG type ipsec-l2l tunnel-group PMG general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group PMG ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map global-class match access-list global_mpc class-map inspection_default match default-inspection-traffic class-map http_https description http_https match access-list Outside_access_in ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options class global-class   user-statistics accounting policy-map http_https class http_https   set connection timeout idle 1:15:00 reset   user-statistics accounting ! service-policy global_policy global service-policy http_https interface Outside smtp-server 192.168.180.235 prompt hostname context no call-home reporting anonymous Cryptochecksum:fcb4c2d9a982c11054c31ee4db778012 : end 

  5505 remote site

  ASA Version 8.2(5) ! hostname AT-Remote domain-name fphc.us enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names name 172.35.0.0 AHCCN name 172.25.11.0 AHCCN-1 name 192.168.180.0 FPHC ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport trunk allowed vlan 1,30 switchport trunk native vlan 1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.197.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address x.x.x.201 255.255.255.252 ! ! boot system disk0:/asa825-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 68.87.68.162 name-server 68.87.74.162 domain-name fphc.us dns server-group DNS_Internal name-server 192.168.180.231 name-server 192.168.180.232 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network obj_any object-group network 172.25.11.0 object-group network 172.35.0.0 object-group network 192.168.180.0 object-group network ASA-FW object-group network Comcast_Outside object-group network AT_Local object-group network NETWORK_OBJ_192.168.197.0_24 object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object echo-reply object-group service DM_INLINE_SERVICE_3 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_2 service-object ip service-object icmp object-group network obj_remote object-group network Franklin_Remote network-object AHCCN-1 255.255.255.0 network-object AHCCN 255.255.254.0 network-object FPHC 255.255.254.0 access-list outside_access_in extended permit ip object-group Franklin_Remote 192.168.197.0 255.255.255.0 access-list outside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log debugging access-list inside_access_in extended permit ip any any log access-list inside_access_in extended permit icmp any any echo log access-list outside_1_cryptomap extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat0_outbound extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat_outbound extended permit ip any interface outside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside asdm image disk0:/asdm-645.bin no asdm history enable arp timeout 14400 global (outside) 101 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 101 access-list inside_nat_outbound access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 x.x.x.202 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 0.0.0.0 0.0.0.0 inside http 192.168.197.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sysopt connection preserve-vpn-flows sysopt noproxyarp inside sysopt noproxyarp dmz crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 43200 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set peer 216.86.7.130 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491     308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130     0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117     30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b     13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504     0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72     20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56     65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043     65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31     30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b     30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20     496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65     74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420     68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329     3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365     63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7     0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597     a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10     9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc     7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b     15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845     63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8     18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced     4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f     81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201     db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868     7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101     ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8     45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777     2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a     1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406     03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973     69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403     02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969     6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b     c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973     69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30     1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603     551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355     1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609     2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80     4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e     b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a     6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc     481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16     b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0     5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8     6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28     6c2527b9 deb78458 c61f381e a4c4cb66   quit crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet x.x.x.130 255.255.255.255 outside telnet timeout 5 ssh timeout 5 console timeout 0 management-access inside dhcpd address 192.168.197.25-192.168.197.100 inside dhcpd dns 192.168.180.232 68.87.74.162 interface inside dhcpd domain fphc.us interface inside dhcpd enable inside ! dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics host threat-detection statistics protocol threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DfltGrpPolicy attributes vpn-filter value outside_1_cryptomap group-policy GroupPolicy_216.86.7.130 internal group-policy GroupPolicy_216.86.7.130 attributes vpn-filter value inside_nat0_outbound vpn-tunnel-protocol IPSec l2tp-ipsec tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_216.86.7.130 tunnel-group x.x.x.130 ipsec-attributes pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options   inspect dns ! service-policy global_policy global prompt hostname context : end 

  Hello

  The reason for the DECLINE suggests that the ASA has still attached to the L2L VPN VPN filter configuration that prevents traffic.

  Check the configuration and remove atleast VPN filter temporarily for testing purposes.

  -Jouni

• VPN Cisco ASA 5540 L2L - one-way traffic only for the pair to a network

  Hello

  I'm a little confused as to which is the problem. This is the premise for the problem I have face.

  One of our big clients has a Cisco ASA5540 (8.2 (2)) failover (active / standby). Early last year, we have configured a VPN from Lan to Lan to a 3rd party site (a device of control point on their end). He worked until early this week when suddenly the connection problems.

  Only 1 of the 3 networks the / guests can access a remote network on the other side. 2 others have suddenly stopped working. We do not know of any change on our side and the remote end also insists that their end configurations are correct (and what information they sent me it seems to be correct)

  So essentially the encryption field is configured as follows:

  access-list line 1 permit extended ip 10.238.57.21 host 10.82.0.202 (hitcnt = 2)
  access-list line 2 extended permit ip 10.207.0.0 255.255.0.0 10.82.0.200 255.255.255.252 (hitcnt = 198)
  access-list line 3 extended permit ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252 (hitcnt = 173)

  Free NAT has been configured as follows (names modified interfaces):

  NAT (interface1) 0-list of access to the INTERIOR-VPN-SHEEP

  the INTERIOR-VPN-SHEEP line 1 permit access list extended ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252
  permit for Access-list SHEEP-VPN-INSIDE line lengthened 2 ip host 10.238.57.21 10.82.0.202

  NAT (interface2) 0-list of access VPN-SHEEP

  VPN-SHEEP line 1 permit access list extended ip 10.207.0.0 255.255.0.0 10.82.0.200 255.255.255.252

  After the problem started only 10.207.0.0/16 network connections worked for the site remote 10.82.0.200/30. All other connections do not work.

  There has been no change made on our side and on the side remote also insists there has been no change. I also checked how long the ASAs have been upward and how long the same device has been active in the failover. Both have been at the same time (about a year)

  The main problem is that users of the 10.231.191.0/24 cant access remote network network. However, the remote user can initiate and implement the VPN on their side but usually get any return traffic. Ive also checked that the routes are configured correctly in the routers in core for the return of their connections traffic should go back to the firewall.

  Also used of "packet - trace" event raising the VPN tunnel (even if it passes the phases VPN). For my understanding "packet - trace" alone with the IP source and destination addresses must activate the VPN connection (even if it generates no traffic to the current tunnel).

  This is printing to the following command: "packet - trace entry interface1 tcp 10.231.191.100 1025 10.82.0.203 80.

  Phase: 1
  Type: ACCESS-LIST
  Subtype:
  Result: ALLOW
  Config:
  Implicit rule
  Additional information:
  MAC access list

  Phase: 2
  Type: FLOW-SEARCH
  Subtype:
  Result: ALLOW
  Config:
  Additional information:
  Not found no corresponding stream, creating a new stream

  Phase: 3
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  in 10.82.0.200 255.255.255.252 outside

  Phase: 4
  Type: ACCESS-LIST
  Subtype: Journal
  Result: ALLOW
  Config:
  Access-group interface interface1
  access-list extended allow ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252
  Additional information:

  Phase: 5
  Type: IP-OPTIONS
  Subtype:
  Result: ALLOW
  Config:
  Additional information:

  Phase: 6
  Type: INSPECT
  Subtype: np - inspect
  Result: ALLOW
  Config:
  class-map inspection_default
  match default-inspection-traffic
  Policy-map global_policy
  class inspection_default
  inspect the http
  global service-policy global_policy
  Additional information:

  Phase: 7
  Type: FOVER
  Subtype: Eve-updated
  Result: ALLOW
  Config:
  Additional information:

  Phase: 8
  Type: NAT-FREE
  Subtype:
  Result: ALLOW
  Config:
  NAT-control
  is the intellectual property inside 10.231.191.0 255.255.255.0 outside 10.82.0.200 255.255.255.252
  Exempt from NAT
  translate_hits = 32, untranslate_hits = 35251
  Additional information:

  -Phase 9 is a static nat of the problem to another network interface. Don't know why his watch to print.

  Phase: 9
  Type: NAT
  Subtype: host-limits
  Result: ALLOW
  Config:
  static (interface1, interface3) 10.231.0.0 10.231.0.0 255.255.0.0 subnet mask
  NAT-control
  is the intellectual property inside 10.231.0.0 255.255.0.0 interface3 all
  static translation at 10.231.0.0
  translate_hits = 153954, untranslate_hits = 88
  Additional information:

  -Phase 10 seems to be the default NAT for the local network configuration when traffic is to the Internet

  Phase: 10
  Type: NAT
  Subtype:
  Result: ALLOW
  Config:
  NAT (interface1) 5 10.231.191.0 255.255.255.0
  NAT-control
  is the intellectual property inside 10.231.191.0 255.255.255.0 outside of any
  dynamic translation of hen 5 (y.y.y.y)
  translate_hits = 3048900, untranslate_hits = 77195
  Additional information:

  Phase: 11
  Type: VPN
  Subtype: encrypt
  Result: ALLOW
  Config:
  Additional information:

  Phase: 12
  Type: VPN
  Subtype: ipsec-tunnel-flow
  Result: ALLOW
  Config:
  Additional information:

  Phase: 13
  Type: IP-OPTIONS
  Subtype:
  Result: ALLOW
  Config:
  Additional information:

  Phase: 14
  Type: CREATING STREAMS
  Subtype:
  Result: ALLOW
  Config:
  Additional information:
  New workflow created with the 1047981896 id, package sent to the next module

  Result:
  input interface: interface1
  entry status: to the top
  entry-line-status: to the top
  output interface: outside
  the status of the output: to the top
  output-line-status: to the top
  Action: allow

  So, basically, the connection should properly go to connect VPN L2L but yet is not. I tried to generate customer traffic of base (with the source IP address of the client network and I see the connection on the firewall, but yet there is absolutely no encapsulated packets when I check "crypto ipsec to show his" regarding this connection VPN L2L.) Its almost as if the firewall only transfers the packets on the external interface instead of encapsulating for VPN?

  And as I said, at the same time the remote end can activate the connection between these 2 networks very well, but just won't get any traffic back to their echo ICMP messages.

  access-list extended allow ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252
  local ident (addr, mask, prot, port): (10.231.191.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (10.82.0.200/255.255.255.252/0/0)
  current_peer: y.y.y.y

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
  #pkts decaps: 131, #pkts decrypt: 131, #pkts check: 131
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
  success #frag before: 0, failures before #frag: 0, #fragments created: 0
  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
  #send errors: 0, #recv errors: 0

  If it was just a routing problem it would be a simple thing to fix, but it is not because I can see the connection I have to confirm it by the router base on the firewall, but they don't just get passed on to the VPN connection.

  Could this happen due to a bug in the Software ASA? Would this be something with Checkpoint VPN device? (I have absolutely no experience with devices of control point)

  If there is any essential information that I can give, please ask.

  -Jouni

  Jouni,

  8.2.4.1 is the minimum - 8.2.4 had some issues (including TCP proxy).

  If this does not resolve the problem - I suggest open TAC box to get to the bottom of this ;-)

  Marcin

• ASA 5505 IPS/IDS Module

  HI Experts,

  Can you please give me an idea on what this module IDS/IPS for ASA 5505?

  How much does it cost? How to install and configure to work with ASA 5505?

  We have also a few site to site of ASA 5505 VPN configuration. This would affect somehow?

  Thank you very much

  ANUP

  ANUP-

  You should be able to find the links that I provided for you with a general search on Cisco's Web site for 'ssc-5' and 'installation' and 'configure '.

  No, you should still ASA terminate Internet access. You want to have the SSC-5 module (IPS) to monitor the interfaces from the INSIDE, (always wanting to make IDS/IPS inside a firewall). This way you can see the traffic after it has been decrypted on your VPN, and after the traffic has been filtered to your firewall rules.

  -Bob

• ASA - that allows HTTP return traffic?

  Hello

  I'm just playing with a few ASA and ask yourself which allows return HTTP traffic in the firewall? Also, what other traffic is allowed by default as HTTP?

  Traffic is from a security interface upper (inside, 100) to a lower (outside, 0) security interface. There is no ACLs not applied on all interfaces.

  I ask because ICMP does not work unless inspection is on (global service-policy global_policy).

  Thanks for any help.

  Firewalls like ASA is with State so for TCP and UDP (albeit with UDP State is handled a little differently) if traffic is allowed a way it automatically allows him back.

  So, when a connection is initiated, if it is permitted through the firewall that is recorded in the table of the State and when the return package arrives at the firewall level, if there is a matching entry, the traffic is allowed and there is no verification of the acl.

  Registration is made on the IP source and destination port numbers, and for TCP it has also used the connection indicators.

  ICMP uses ports so initially, that she could not be redirected and you had to allow him to return with an acl (if the traffic was less than the increase security level).

  But then stateful inspection has been added for ICMP, as well, but you still must activate it Unlike TCP and UDP.

  Jon

• Cluster ASA with IPS

  Hello

  I intend to group 4 ASA firewall between 2 domain controllers.

  I would like to know if the ASA IPS device is also grouped with the ASAs 4 or I have to buy the hardware module ASA IPS?

  In the case where I will need to buy the module hardware IPS ASA it will work as a single module or it could also be clustered?

  Thank you very much for the help.

  Kind regards

  J

  The Documentation States that the IPS is managed individually by unit. So every unit will have it of own IPS and protects the traffic he sees. Without a config-replication available for IPS, you should plan to use a system management as MSC company to ensure that all units have the same configuration.

• SSP IPS can send traffic, so it acts only as an IDS, not as an IPS?

  Hello

  I could get the wrong end of the stick, I'm looking at the IPS Cisco portfolio, as the noise of the SSP IPS in 5585-X. I would like to than the IPS SSM to act passively, just monitor illicit traffic. Traffic would not be increased by X-5585, only to her.

  I would like to the SSP, IPS to send a copy of the Treaty and then monitor it.

  This would be possible using the SSP IPS?

  Thank you very much

  IDS/IPS module will only receive traffic only after its passage by the ASA. The IPS module security policy is adjustable for non-blocking actions, if you wish.

  -Robert

• Access to the ASA 5515 IPS administration

  Hello!

  I can not access the ASA IPS module.

  I try to ASDM. Configuration-> IPS. I type user name and password, see following message: "error connecting to the sensor. Error loading sensor.

  Could you please help me fix my config?

  I have the topology of the network like this

  http://www.Cisco.com/image/gif/paws/113690/IPS-config-mod-01.gif

  My config

  KR - ASA # sh run concert int 0/5

  !

  interface GigabitEthernet0/5

  nameif inside

  security-level 100

  IP 172.33.1.253 255.255.255.0 watch 172.33.1.254

  !

  interface Management0/0

  management only

  No nameif

  security-level 0

  no ip address

  !

  KR - ASA # sh details ips module

  App name: IPS

  App status. : to the top

  App Status / / Desc: Normal operation

  App version: 4,0000 E4

  Flight status data: to the top

  Status: to the top

  License: IPS active Module perpetual

  Mgmt IP addr: 172.33.1.251

  MGMT network mask: 255.255.255.0

  Mgmt gateway: 172.33.1.253

  MGMT access list: 172.33.1.0/24

  MGMT access list: 172.34.1.0/24

  Web to MGMT ports: 443

  Mgmt TLS enabled: true

  !

  KR - ASA # ping 172.33.1.251

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 172.33.1.251, wait time is 2 seconds:

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 10/10/10 ms

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  !

  Thank you!

  Hi Vladimir,.

  Yups, this is an issue that is seen. Downgrade of Java should solve the problem. If this is not the case, turn on java debugging logs and paste those here:

  Go to control panel-> java right click-> Open-> Advanced-> check all the boxes that appear under debugging and click the radio button to see the console

  Rerun the IDM in browser and collect data in the java console window and paste it here.

  -

  Kind regards

  Sourav Kakkar

• ASA - several IPS for VPN

  I'll put up Anyconnect to replace our customers of Cisco IPsec VPN, since it is end of life. A part of the process is to get an SSL certificate and a FULL domain name to use for this. I've got that and it is applied to the ASA very well. Now we don't get these warnings to the subject it is not not sure and such.

  The problem is that we use a non-standard port for the SSL VPN from 443 is already sent to an internal device. I have unused public addresses to the external interface of the ASA, but I don't know how I could use them. I would like to have a different IP address for SSL VPN, so I don't have to mess with the port forward that is currently in place. I read on proxy arp, but that looks like it could be a problem. I could have someone connect another cable to a different interface on the ASA (5512-X) and assign this static interface I want for the VPN, but I'm not sure it will work well. We have connections VPN site to site in place as well. Can I have the ASA listening on two different interfaces at the same time?

  Recap:

  IP 1 - address primary NAT, Site at tunnels put end here, some Cisco IPsec VPN terminate customer

  IP 2 - want to have all customers of Anyconnect connect here, to migrate all legacy Cissco IPsec clients until they are all over Anyconnect.

  Key is that I can not stop listening on IP 1 for site-to-site connections.

  Thoughts?

  Thank you!

  On the SAA, you cannot use the additional IPS for VPN.

  If tcp/443 is already used for an external server, then I would reconfigure the DNS entry for it to use the second IP address that must be sent to the internal server. You can then use the IP interface of the ASA for AnyConnect.

• VPN site to site thanks to a pair of asa 5505 does not pass traffic

  the configurations are fairly simple. Ping between the two lan pc fails. "show isakmp crypto his" and "crypto ipsec to show his" got out, if.

  Please refer to the attached text and diagram files.

  I'm pre-configures the ASA, for external interfaces have ip addresses private for the moment.

  all entries are welcome.

  Thank you!

  Your look simple configurations.

  As the Phase 1 and Phase 2 SAs are coming, the VPN seems correct.

  We see program leaving ASA1 and decaps ASA2, but no return traffic seems to come in.

  I suspect a problem with the host 192.168.102.5. Can you capture the top packages and check that it receives traffic initiated from the host 192.168.101.5 (side ASA1) and he answers with the ASA2 as its default gateway?