ASA - several IPS for VPN

I'll put up Anyconnect to replace our customers of Cisco IPsec VPN, since it is end of life. A part of the process is to get an SSL certificate and a FULL domain name to use for this. I've got that and it is applied to the ASA very well. Now we don't get these warnings to the subject it is not not sure and such.

The problem is that we use a non-standard port for the SSL VPN from 443 is already sent to an internal device. I have unused public addresses to the external interface of the ASA, but I don't know how I could use them. I would like to have a different IP address for SSL VPN, so I don't have to mess with the port forward that is currently in place. I read on proxy arp, but that looks like it could be a problem. I could have someone connect another cable to a different interface on the ASA (5512-X) and assign this static interface I want for the VPN, but I'm not sure it will work well. We have connections VPN site to site in place as well. Can I have the ASA listening on two different interfaces at the same time?

Recap:

IP 1 - address primary NAT, Site at tunnels put end here, some Cisco IPsec VPN terminate customer

IP 2 - want to have all customers of Anyconnect connect here, to migrate all legacy Cissco IPsec clients until they are all over Anyconnect.

Key is that I can not stop listening on IP 1 for site-to-site connections.

Thoughts?

Thank you!

On the SAA, you cannot use the additional IPS for VPN.

If tcp/443 is already used for an external server, then I would reconfigure the DNS entry for it to use the second IP address that must be sent to the internal server. You can then use the IP interface of the ASA for AnyConnect.

Tags: Cisco Security

Similar Questions

Configuration of several peers IPs for VPN Site to Site on a firewall context

I'm running a version of 5585 Cisco ASA firewall 9.1. I use the context mode to meet my clients of different clouds. I have a new client who needs a VPN from Site to Site to a remote location. Remoteness have three counterparts IPs configured in failover mode I need to configure on my end.

Please tell us if this is possible and how to go about configuring.

A context is just like any independent, just virtualized firewall. I did it and it worked fine for me.

--

Please do not forget to select a correct answer and rate useful posts

New ASA 5545 x for VPN configuration

The ASA has an IOS disk0: / asa911-smp - k8.bin.

In the process of reconfiguration of cryptography groups card and tunnel, I am now giving the key word of iKev1 or iKev2.

I am considering the ikev2 as being safer, but would like some clarification and advice on which to choose and why?

Please inform promptly.

IKEv2 is in many ways superior. Both ends must have the level of code to support - that is about the only negative.

There are a few good tips and advice on why IKEv2 can be your best choice in this document to TAC.

ASA for vpn only

Hello

I would like to configure the ASA for vpn only. By default, ASA allows traffic from the interface of high security to low security interface. I want to stop it. Is it possible to do without resorting to access lists.

Thank you

John

Define interfaces for the same level of security and make sure that you do not have same-security-traffic permits inter-interface enabled.

http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807fc191.shtml

Hope that helps.

Can the NAT of ASA configuration for vpn local pool

We have a group of tunnel remote ipsec, clients address pool use 172.18.33.0/24 which setup from command "ip local pool. The remote cliens must use full ipsec tunnel.

Because of IP overlap or route number, we would like to NAT this local basin of 172.18.33.0 to 192.168.3.0 subnet when vpn users access certain servers or subnet via external interface of the ASA. I have nat mapping address command from an interface to another interface of Armi. The pool local vpn is not behind any physical interface of the ASA. My question is can ASA policy NAT configuration for vpn local pool. If so, how to set up this NAT.

Thank you

Haiying

Elijah,

NAT_VPNClients ip 172.18.33.0 access list allow 255.255.255.0 10.1.1.0 255.255.255.0

public static 192.168.33.0 (external, outside) - NAT_VPNClients access list

The above configuration will be NAT 172.18.33.0/24 to 192.168.33.0/24 when you go to 10.1.1.0/24 (assuming that 10.1.1.0/24 is your subnet of servers).

To allow the ASA to redirect rewritten traffic the same interface in which he receive, you must also order:

permit same-security-traffic intra-interface

Federico.

ASA 5510 Auth for site-to-site VPN users

Hello

is there a way we can get the ASA to prompt users VPN site-to-site to authenticate on ASA/RADIUS before access resources head behind ASA such as Sharepoint etc allowed in via respective VPN ACL?

I never did, but you should be able to use authentication 'Cut Through'.

http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/113363-ASA-cut-through-config-00.html

Basically, the user has little or no access, and the ASA intercepts a request, such as via HTTP and then authenticates the session. After that the user can access all that you allow them.

ASA 5505 IPS/IDS Module

HI Experts,

Can you please give me an idea on what this module IDS/IPS for ASA 5505?

How much does it cost? How to install and configure to work with ASA 5505?

We have also a few site to site of ASA 5505 VPN configuration. This would affect somehow?

Thank you very much

ANUP

ANUP-

You should be able to find the links that I provided for you with a general search on Cisco's Web site for 'ssc-5' and 'installation' and 'configure '.

No, you should still ASA terminate Internet access. You want to have the SSC-5 module (IPS) to monitor the interfaces from the INSIDE, (always wanting to make IDS/IPS inside a firewall). This way you can see the traffic after it has been decrypted on your VPN, and after the traffic has been filtered to your firewall rules.

-Bob

ASA - NG IPS inspect encrypted traffic

Hello

We buy ASA 5525-X with IPS for us to network. We have a number of servers that provide services Web Applications.

We have a big problem installing ASA it is we cannot use ASA inspect and IPS has because over 80% traffic through encrypted.

Thank you to tell me how I can solve this problem.

I know a solution to use Proxy HTTPS in ASA, but for some reason, this solution cannot be implemented.

Thank you.

If you want to protect you own Web servers against attacks from the internet. You cannot use the HTTPS-decryption of the ASA-CX as the internet - customers do not have your CX-certificate.

To resolve this problem, the typical is to place a proxy reversed in a DMZ and do the SSL/TLS-manipulation here. The reverse-proxy sends plain HTTP through the ASA and the IPS may inspect what and protect your servers.

Look at a FPS in real time of the events of several IPS devices

What is the best strategy for the display of the IPS in real-time of the events of several IPS devices now that VMS filed end of LIFE?

There was a nice view unique of all IPS events from all IPS devices run in VMS and I was wondering where I can tell people to receive the same information on their networks. I do not see in CSM and I do not think that they will find in MARCH. Please notify and correct me if I'm wrong. Thank you!

You can use VEI. It is an observer of events that has a dashboard in real time also. You can import several sensors inside and view the events in real time.

Link to VEI to 5.x versions:

http://www.Cisco.com/cgi-bin/tablebuild.pl/IPS-EV

Link to VEI to versions 4.x:

http://www.Cisco.com/cgi-bin/tablebuild.pl/IDs-EV

Kind regards

Maryse.

ASA 8.3 - SSL VPN - NAT problem

Need help to find how to configure anyconnect VPN with VPN client using a NAT networking internal.

There are many items on the side - how to disable NAT for vpn pool.

I need to create the gateway VPN to the complex international lnetwork, vpnpool is out of range of regular subnet of that network, so it's going to be questions witout NAT routing.

I so need to vpn clients connected to be PATed to . The problem is that there is also a dynamic to PAT rule for the ordinary acccess Iternet which translates as 'rules NAT asymmetry... "error.

Create two times different NAT rules and moving them on up/down makes no difference. There are also some hidden rules of vpn setup :-(that could not be seen.

V8.3 seems is destroying trust in Cisco firewall...

Thank you.

Stan,

Something like this works for me.

192.168.0.0/24---routeur--172.16.0.0/24 ASA-= cloud = host. (the tunnel he get IP address of 'over' pool, which is also connected to the inside)

BSNs-ASA5520-10 (config) # clear xlate
INFO: 762 xlates deleted
BSNs-ASA5520-10 (config) # sh run nat
NAT (inside, outside) static all of a destination SHARED SHARED static
!
NAT source auto after (indoor, outdoor) dynamic one interface
BSNs-ASA5520-10 (config) # sh run object network
network of the LOCAL_NETWORK object
192.168.0.0 subnet 255.255.255.0
The SHARED object network
172.16.0.0 subnet 255.255.255.0
BSNs-ASA5520-10 (config) # sh run ip local pool
IP local pool ALL 10.0.0.100 - 10.0.0.200
local IP ON 172.16.0.100 pool - 172.16.0.155
BSNs-ASA5520-10 (config) # sh run tunne
BSNs-ASA5520-10 (config) # sh run tunnel-group
attributes global-tunnel-group DefaultWEBVPNGroup
address pool ON

If I get your drift... bypass inside and outside is not really necessary on Cisco equipment as it should work straight out of the box via the proxy arp, but I'm not face or solution providers for remote access.

Marcin

Error of tunneling to ASA 5505 using "Software VPN Client"

Here's my current network:

I'm VPN tunnel in the ASA using the Cisco VPN Client software.

Here is my config ASA config: http://pastebin.com/raw.php?i=ad6p1Zac

Here's my entry for the VPN Client connection information:

(Password: cisco)

When I try to connect, I get the message error "the received HASH load cannot be verified.

What is this error and how can I solve it?

I think you need to enter this information in the fields of group authentiation:

(Just below "Group authentication")

Name: vpnclientgroup

Password: [just what you entered as a pre shared key below]
```
tunnel-group vpnclientgroup ipsec-attributes pre-shared-key *****
```
After the establishmet tunnel you will get a password pop up, that you enter "David" and the associated password.

Cisco ASA 5505 site for multiple subnet of the site.

Hello. I need help to configure my cisco asa 5505.

I set up a VPN between two ASA 5505 tunnel

Site 1:

Subnet 192.168.77.0

Site 2:

Have multiple VLANs and now the tunnel goes to vlan400 - 192.168.1.0

What I need help:

Site 1, I need to be able to reach a different virtual LAN on site 2. vlan480 - 192.168.20.0

And 1 site I have to reach 192.168.77.0 subnet of vlan480 - 192.168.20.0

Vlan480 is used for phones. In vlan480, we have a PABX.

Is this possible to do?

Any help would be much appreciated!

Config site 2:

: Saved

:

ASA Version 7.2 (2)

!

ciscoasa hostname

domain default.domain.invalid

activate the password encrypted x

names of

name 192.168.1.250 DomeneServer

name of 192.168.1.10 NotesServer

name 192.168.1.90 Steadyily

name 192.168.1.97 TerminalServer

name 192.168.1.98 eyeshare w8

name 192.168.50.10 w8-print

name 192.168.1.94 w8 - app

name 192.168.1.89 FonnaFlyMedia

!

interface Vlan1

nameif Vlan1

security-level 100

IP 192.168.200.100 255.255.255.0

OSPF cost 10

!

interface Vlan2

nameif outside

security-level 0

IP address 79.x.x.226 255.255.255.224

OSPF cost 10

!

interface Vlan400

nameif vlan400

security-level 100

IP 192.168.1.1 255.255.255.0

OSPF cost 10

!

interface Vlan450

nameif Vlan450

security-level 100

IP 192.168.210.1 255.255.255.0

OSPF cost 10

!

interface Vlan460

nameif Vlan460-SuldalHotell

security-level 100

IP 192.168.2.1 255.255.255.0

OSPF cost 10

!

interface Vlan461

nameif Vlan461-SuldalHotellGjest

security-level 100

address 192.168.3.1 IP 255.255.255.0

OSPF cost 10

!

interface Vlan462

Vlan462-Suldalsposten nameif

security-level 100

192.168.4.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan470

nameif vlan470-Kyrkjekontoret

security-level 100

IP 192.168.202.1 255.255.255.0

OSPF cost 10

!

interface Vlan480

nameif vlan480 Telefoni

security-level 100

address 192.168.20.1 255.255.255.0

OSPF cost 10

!

interface Vlan490

nameif Vlan490-QNapBackup

security-level 100

IP 192.168.10.1 255.255.255.0

OSPF cost 10

!

interface Vlan500

nameif Vlan500-HellandBadlands

security-level 100

192.168.30.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan510

Vlan510-IsTak nameif

security-level 100

192.168.40.1 IP address 255.255.255.0

OSPF cost 10

!

interface Vlan600

nameif Vlan600-SafeQ

security-level 100

192.168.50.1 IP address 255.255.255.0

OSPF cost 10

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

switchport access vlan 500

switchport trunk allowed vlan 400,450,460-462,470,480,500,510,600,610

switchport mode trunk

!

interface Ethernet0/3

switchport access vlan 490

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passwd encrypted x

passive FTP mode

clock timezone WAT 1

DNS server-group DefaultDNS

domain default.domain.invalid

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

Lotus_Notes_Utgaaande tcp service object-group

UT og Frim Notes Description til alle

area of port-object eq

port-object eq ftp

port-object eq www

EQ object of the https port

port-object eq lotusnotes

EQ Port pop3 object

EQ pptp Port object

EQ smtp port object

Lotus_Notes_inn tcp service object-group

Description of the inn og alle til Notes

port-object eq www

port-object eq lotusnotes

EQ Port pop3 object

EQ smtp port object

object-group service Reisebyraa tcp - udp

3702 3702 object-port Beach

5500 5500 object-port Beach

range of object-port 9876 9876

object-group service Remote_Desktop tcp - udp

Description Tilgang til Remote Desktop

3389 3389 port-object range

object-group service Sand_Servicenter_50000 tcp - udp

Description program tilgang til sand service AS

object-port range 50000 50000

VNC_Remote_Admin tcp service object-group

Description Fra ¥ oss til alle

5900 5900 port-object range

object-group service Printer_Accept tcp - udp

9100 9100 port-object range

port-object eq echo

ICMP-type of object-group Echo_Ping

echo ICMP-object

response to echo ICMP-object

object-group service Print tcp

9100 9100 port-object range

FTP_NADA tcp service object-group

Suldalsposten NADA tilgang description

port-object eq ftp

port-object eq ftp - data

Telefonsentral tcp service object-group

Hoftun description

port-object eq ftp

port-object eq ftp - data

port-object eq www

EQ object of the https port

port-object eq telnet

Printer_inn_800 tcp service object-group

Fra 800 thought-out og inn til 400 port 7777 description

range of object-port 7777 7777

Suldalsposten tcp service object-group

Description send av mail hav Mac Mail at - Ã ¥ nrep smtp

EQ Port pop3 object

EQ smtp port object

http2 tcp service object-group

Beach of port-object 81 81

object-group service DMZ_FTP_PASSIVE tcp - udp

55536 56559 object-port Beach

object-group service DMZ_FTP tcp - udp

20 21 object-port Beach

object-group service DMZ_HTTPS tcp - udp

Beach of port-object 443 443

object-group service DMZ_HTTP tcp - udp

8080 8080 port-object range

DNS_Query tcp service object-group

of domain object from the beach

object-group service DUETT_SQL_PORT tcp - udp

Description for a mellom andre og duett Server nett

54659 54659 object-port Beach

outside_access_in of access allowed any ip an extended list

outside_access_out of access allowed any ip an extended list

vlan400_access_in list extended access deny ip any host 149.20.56.34

vlan400_access_in list extended access deny ip any host 149.20.56.32

vlan400_access_in of access allowed any ip an extended list

Vlan450_access_in list extended access deny ip any host 149.20.56.34

Vlan450_access_in list extended access deny ip any host 149.20.56.32

Vlan450_access_in of access allowed any ip an extended list

Vlan460_access_in list extended access deny ip any host 149.20.56.34

Vlan460_access_in list extended access deny ip any host 149.20.56.32

Vlan460_access_in of access allowed any ip an extended list

vlan400_access_out list extended access permit icmp any any Echo_Ping object-group

vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_Utgaaande

vlan400_access_out list extended access permit tcp any host DomeneServer object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host TerminalServer object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host http2 object-group Steadyily

vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_inn

vlan400_access_out list extended access permit tcp any host NotesServer object-group Remote_Desktop

vlan400_access_out allowed extended access list tcp any host w8-eyeshare object-group Remote_Desktop

vlan400_access_out allowed extended access list tcp any host w8 - app object-group Remote_Desktop

vlan400_access_out list extended access permit tcp any host FonnaFlyMedia range 8400-8600

vlan400_access_out list extended access permit udp any host FonnaFlyMedia 9000 9001 range

vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host DomeneServer

vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host w8 - app object-group DUETT_SQL_PORT

Vlan500_access_in list extended access deny ip any host 149.20.56.34

Vlan500_access_in list extended access deny ip any host 149.20.56.32

Vlan500_access_in of access allowed any ip an extended list

vlan470_access_in list extended access deny ip any host 149.20.56.34

vlan470_access_in list extended access deny ip any host 149.20.56.32

vlan470_access_in of access allowed any ip an extended list

Vlan490_access_in list extended access deny ip any host 149.20.56.34

Vlan490_access_in list extended access deny ip any host 149.20.56.32

Vlan490_access_in of access allowed any ip an extended list

Vlan450_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan1_access_out of access allowed any ip an extended list

Vlan1_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop

Vlan1_access_out deny ip extended access list a whole

Vlan1_access_out list extended access permit icmp any any echo response

Vlan460_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan490_access_out list extended access permit icmp any any Echo_Ping object-group

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP_PASSIVE

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTPS

Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTP

Vlan500_access_out list extended access permit icmp any any Echo_Ping object-group

vlan470_access_out list extended access permit icmp any any Echo_Ping object-group

vlan470_access_out list extended access permit tcp any host 192.168.202.10 - group Remote_Desktop object

Vlan510_access_out list extended access permit icmp any any Echo_Ping object-group

vlan480_access_out of access allowed any ip an extended list

Vlan510_access_in of access allowed any ip an extended list

Vlan600_access_in of access allowed any ip an extended list

Vlan600_access_out list extended access permit icmp any one

Vlan600_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop

Vlan600_access_out list extended access permitted tcp 192.168.1.0 255.255.255.0 host w8-printing eq www

Vlan600_access_out list extended access permitted tcp 192.168.202.0 255.255.255.0 host w8-printing eq www

Vlan600_access_out list extended access permitted tcp 192.168.210.0 255.255.255.0 host w8-printing eq www

Vlan600_access_in_1 of access allowed any ip an extended list

Vlan461_access_in of access allowed any ip an extended list

Vlan461_access_out list extended access permit icmp any any Echo_Ping object-group

vlan400_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

outside_20_cryptomap_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

outside_20_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0

access-list Vlan462-Suldalsposten_access_in extended ip allowed any one

access-list Vlan462-Suldalsposten_access_out extended permit icmp any any echo response

access-list Vlan462-Suldalsposten_access_out_1 extended permit icmp any any echo response

access-list Vlan462-Suldalsposten_access_in_1 extended ip allowed any one

pager lines 24

Enable logging

asdm of logging of information

MTU 1500 Vlan1

Outside 1500 MTU

vlan400 MTU 1500

MTU 1500 Vlan450

MTU 1500 Vlan460-SuldalHotell

MTU 1500 Vlan461-SuldalHotellGjest

vlan470-Kyrkjekontoret MTU 1500

MTU 1500 vlan480-Telefoni

MTU 1500 Vlan490-QNapBackup

MTU 1500 Vlan500-HellandBadlands

MTU 1500 Vlan510-IsTak

MTU 1500 Vlan600-SafeQ

MTU 1500 Vlan462-Suldalsposten

no failover

Monitor-interface Vlan1

interface of the monitor to the outside

the interface of the monitor vlan400

the interface of the monitor Vlan450

the interface of the Vlan460-SuldalHotell monitor

the interface of the Vlan461-SuldalHotellGjest monitor

the interface of the vlan470-Kyrkjekontoret monitor

Monitor-interface vlan480-Telefoni

the interface of the Vlan490-QNapBackup monitor

the interface of the Vlan500-HellandBadlands monitor

Monitor-interface Vlan510-IsTak

Monitor-interface Vlan600-SafeQ

the interface of the monitor Vlan462-Suldalsposten

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 522.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

vlan400_nat0_outbound (vlan400) NAT 0 access list

NAT (vlan400) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan450) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan460-SuldalHotell) 1 0.0.0.0 0.0.0.0

NAT (Vlan461-SuldalHotellGjest) 1 0.0.0.0 0.0.0.0

NAT (vlan470-Kyrkjekontoret) 1 0.0.0.0 0.0.0.0

NAT (Vlan490-QNapBackup) 1 0.0.0.0 0.0.0.0 dns

NAT (Vlan500-HellandBadlands) 1 0.0.0.0 0.0.0.0

NAT (Vlan510-IsTak) 1 0.0.0.0 0.0.0.0

NAT (Vlan600-SafeQ) 1 0.0.0.0 0.0.0.0

NAT (Vlan462-Suldalsposten) 1 0.0.0.0 0.0.0.0

static (vlan400, external) 79.x.x.x DomeneServer netmask 255.255.255.255

static (vlan470-Kyrkjekontoret, external) 79.x.x.x 192.168.202.10 netmask 255.255.255.255

static (vlan400, external) 79.x.x.x NotesServer netmask 255.255.255.255 dns

static (vlan400, external) 79.x.x.231 netmask 255.255.255.255 TerminalServer

static (vlan400, external) 79.x.x.234 Steadyily netmask 255.255.255.255

static (vlan400, outside) w8-eyeshare netmask 255.255.255.255 79.x.x.232

static (Vlan490-QNapBackup, external) 79.x.x.233 192.168.10.10 netmask 255.255.255.255 dns

static (Vlan600-SafeQ, external) 79.x.x.235 w8 - print subnet mask 255.255.255.255

static (vlan400, outside) w8 - app netmask 255.255.255.255 79.x.x.236

static (Vlan450, vlan400) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

(Vlan500-HellandBadlands, vlan400) static 192.168.30.0 192.168.30.0 netmask 255.255.255.0

(vlan400, Vlan500-HellandBadlands) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0

(vlan400, Vlan450) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (vlan400, external) 79.x.x.252 FonnaFlyMedia netmask 255.255.255.255

static (Vlan462-Suldalsposten, vlan400) 192.168.4.0 192.168.4.0 netmask 255.255.255.0

static (vlan400, Vlan462-Suldalsposten) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (vlan400, Vlan600-SafeQ) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

static (Vlan600-SafeQ, vlan400) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan600-SafeQ, Vlan450) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan600-SafeQ, vlan470-Kyrkjekontoret) 192.168.50.0 192.168.50.0 netmask 255.255.255.0

static (Vlan450, Vlan600-SafeQ) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

static (vlan470-Kyrkjekontoret, Vlan600-SafeQ) 192.168.202.0 192.168.202.0 netmask 255.255.255.0

Access-group interface Vlan1 Vlan1_access_out

Access-group outside_access_in in interface outside

Access-group outside_access_out outside interface

Access-group vlan400_access_in in the vlan400 interface

vlan400_access_out group access to the interface vlan400

Access-group Vlan450_access_in in the Vlan450 interface

Access-group interface Vlan450 Vlan450_access_out

Access-group interface Vlan460-SuldalHotell Vlan460_access_in

Access-group interface Vlan460-SuldalHotell Vlan460_access_out

Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_in

Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_out

Access-group vlan470_access_in in interface vlan470-Kyrkjekontoret

vlan470_access_out access to the interface vlan470-Kyrkjekontoret group

access to the interface vlan480-Telefoni, vlan480_access_out group

Access-group interface Vlan490-QNapBackup Vlan490_access_in

Access-group interface Vlan490-QNapBackup Vlan490_access_out

Access-group interface Vlan500-HellandBadlands Vlan500_access_in

Access-group interface Vlan500-HellandBadlands Vlan500_access_out

Access-group interface Vlan510-IsTak Vlan510_access_in

Access-group interface Vlan510-IsTak Vlan510_access_out

Access-group Vlan600_access_in_1 interface Vlan600-SafeQ

Access-group Vlan600_access_out interface Vlan600-SafeQ

Access-group Vlan462-Suldalsposten_access_in_1 Vlan462-Suldalsposten interface

Access-group Vlan462-Suldalsposten_access_out_1 Vlan462-Suldalsposten interface

Route outside 0.0.0.0 0.0.0.0 79.x.x.225 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout, uauth 0:05:00 absolute

x x encrypted privilege 15 password username

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.210.0 255.255.255.0 Vlan450

http 192.168.200.0 255.255.255.0 Vlan1

http 192.168.1.0 255.255.255.0 vlan400

No snmp server location

No snmp Server contact

SNMP-Server Community public

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

card crypto outside_map 20 match address outside_20_cryptomap_1

card crypto outside_map 20 set pfs

peer set card crypto outside_map 20 62.92.159.137

outside_map crypto 20 card value transform-set ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow outside

ISAKMP crypto enable vlan400

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

tunnel-group 62.92.159.137 type ipsec-l2l

IPSec-attributes tunnel-group 62.92.159.137

pre-shared-key *.

Telnet 192.168.200.0 255.255.255.0 Vlan1

Telnet 192.168.1.0 255.255.255.0 vlan400

Telnet timeout 5

SSH 171.68.225.216 255.255.255.255 outside

SSH timeout 5

Console timeout 0

dhcpd update dns both

!

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan1

!

dhcpd option 6 ip 81.167.36.3 81.167.36.11 outside interface

!

dhcpd address 192.168.1.100 - 192.168.1.225 vlan400

dhcpd option ip 6 DomeneServer 81.167.36.11 interface vlan400

dhcpd option 3 ip 192.168.1.1 interface vlan400

vlan400 enable dhcpd

!

dhcpd address 192.168.210.100 - 192.168.210.200 Vlan450

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan450

dhcpd ip interface 192.168.210.1 option 3 Vlan450

enable Vlan450 dhcpd

!

dhcpd address 192.168.2.100 - 192.168.2.150 Vlan460-SuldalHotell

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan460-SuldalHotell

dhcpd 192.168.2.1 ip interface option 3 Vlan460-SuldalHotell

dhcpd enable Vlan460-SuldalHotell

!

dhcpd address 192.168.3.100 - 192.168.3.200 Vlan461-SuldalHotellGjest

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan461-SuldalHotellGjest

dhcpd ip interface 192.168.3.1 option 3 Vlan461-SuldalHotellGjest

dhcpd enable Vlan461-SuldalHotellGjest

!

dhcpd address 192.168.202.100 - 192.168.202.199 vlan470-Kyrkjekontoret

interface of dhcpd option 3 ip 192.168.202.1 vlan470-Kyrkjekontoret

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan470-Kyrkjekontoret

dhcpd enable vlan470-Kyrkjekontoret

!

dhcpd option 3 192.168.20.1 ip interface vlan480-Telefoni

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan480-Telefoni

!

dhcpd address 192.168.10.80 - 192.168.10.90 Vlan490-QNapBackup

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan490-QNapBackup

dhcpd 192.168.10.1 ip interface option 3 Vlan490-QNapBackup

!

dhcpd address 192.168.30.100 - 192.168.30.199 Vlan500-HellandBadlands

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan500-HellandBadlands

dhcpd ip interface 192.168.30.1 option 3 Vlan500-HellandBadlands

dhcpd enable Vlan500-HellandBadlands

!

dhcpd address 192.168.40.100 - 192.168.40.150 Vlan510-IsTak

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan510-IsTak

dhcpd 3 ip Vlan510-IsTak 192.168.40.1 option interface

Vlan510-IsTak enable dhcpd

!

dhcpd address 192.168.50.150 - 192.168.50.199 Vlan600-SafeQ

dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan600-SafeQ

Vlan600-SafeQ enable dhcpd

!

dhcpd address 192.168.4.100 - 192.168.4.150 Vlan462-Suldalsposten

interface option 6 ip DomeneServer 81.167.36.11 Vlan462-Suldalsposten dhcpd

interface ip dhcpd option 3 Vlan462-Suldalsposten 192.168.4.1

Vlan462-Suldalsposten enable dhcpd

!

!

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

!

context of prompt hostname

Cryptochecksum:x

: end

Site 1 config:

: Saved

:

ASA Version 7.2 (4)

!

ciscoasa hostname

domain default.domain.invalid

activate the password encrypted x

passwd encrypted x

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.77.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

PPPoE Telenor customer vpdn group

IP address pppoe setroute

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

switchport access vlan 15

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS server-group DefaultDNS

domain default.domain.invalid

outside_access_in list extended access permit icmp any any disable log echo-reply

access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0

access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.1.0 255.255.255.0

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 524.bin

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group outside_access_in in interface outside

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

Enable http server

http 192.168.77.0 255.255.255.0 inside

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs

peer set card crypto outside_map 1 79.160.252.226

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

outside_map interface card crypto outside

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet 192.168.77.0 255.255.255.0 inside

Telnet timeout 5

SSH timeout 5

Console timeout 0

VPDN group Telenor request dialout pppoe

VPDN group Telenor localname x

VPDN group Telenor ppp authentication chap

VPDN x x local store password username

dhcpd outside auto_config

!

dhcpd address 192.168.77.100 - 192.168.77.130 inside

dhcpd dns 192.168.77.1 on the inside interface

dhcpd option 6 ip 130.67.15.198 193.213.112.4 interface inside

dhcpd allow inside

!

dhcpd option 6 ip 130.67.15.198 193.213.112.4 outside interface

!

tunnel-group 79.160.252.226 type ipsec-l2l

IPSec-attributes tunnel-group 79.160.252.226

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:x

: end

Hello

The addition of a new network to the existing VPN L2L should be a fairly simple process.

Essentially, you need to add the network of the Crypto present ACL configurations "crypto map" . You also need to configure the NAT0 configuration for it in the appropriate interfaces of the SAA. These configurations are all made on both ends of the VPN L2L connection.

Looking at your configurations above it would appear that you need to the following configurations

SITE 1
- We add the new network at the same time the crypto ACL and ACL NAT0
access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.20.0 255.255.255.0

access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.20.0 255.255.255.0

SITE 2
- We add new ACL crypto network
- We create a new NAT0 configuration for interface Vlan480 because there is no previous NAT0 configuration
outside_20_cryptomap_1 to access extended list ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0

Comment by VLAN480-NAT0 NAT0 for VPN access-list

access-list VLAN480-NAT0 ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0

NAT 0 access-list VLAN480-NAT0 (vlan480-Telefoni)

These configurations should pretty much do the trick.

Let me know if it worked

-Jouni

Traffic permitted only one-way for VPN-connected computers

Hello

I currently have an ASA 5505. I put up as a remote SSL VPN access. My computers can connect to the VPN very well. They just cannot access the internal network (192.168.250.0). They cannot ping the inside interface of the ASA, nor any of the machines. It seems that all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping this ASA VPN connection machine and other machines inside the LAN. It seems that the traffic allows only one way. I messed up with ACL with nothing doesn't. Any suggestions please?

Pool DHCP-192.168.250.20 - 50--> for LAN

Pool VPN: 192.168.250.100 and 192.168.250.101

Outside interface to get the modem DHCP

The inside interface: 192.168.1.1

Courses Running Config:

: Saved

:

ASA Version 8.2 (5)

!

hostname HardmanASA

activate the password # encrypted

passwd # encrypted

names of

!

interface Ethernet0/0

switchport access vlan 20

!

interface Ethernet0/1

switchport access vlan 10

!

interface Ethernet0/2

switchport access vlan 10

!

interface Ethernet0/3

Shutdown

!

interface Ethernet0/4

Shutdown

!

interface Ethernet0/5

Shutdown

!

interface Ethernet0/6

Shutdown

!

interface Ethernet0/7

switchport access vlan 10

!

interface Vlan1

No nameif

no level of security

no ip address

!

interface Vlan10

nameif inside

security-level 100

IP 192.168.250.1 255.255.255.0

!

interface Vlan20

nameif outside

security-level 0

IP address dhcp setroute

!

passive FTP mode

DNS lookup field inside

DNS domain-lookup outside

pager lines 24

Within 1500 MTU

Outside 1500 MTU

mask 192.168.250.100 - 192.168.250.101 255.255.255.0 IP local pool VPN_Pool

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global interface 10 (external)

NAT (inside) 10 192.168.250.0 255.255.255.0

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.250.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Telnet timeout 5

SSH 192.168.250.0 255.255.255.0 inside

SSH timeout 5

SSH version 2

Console timeout 0

dhcpd dns 8.8.8.8

!

dhcpd address 192.168.250.20 - 192.168.250.50 inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

allow outside

SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image

Picture disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 SVC

enable SVC

tunnel-group-list activate

attributes of Group Policy DfltGrpPolicy

value of server DNS 8.8.8.8

Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

tunnel-group AnyConnect type remote access

tunnel-group AnyConnect General attributes

address pool VPN_Pool

tunnel-group AnyConnect webvpn-attributes

enable AnyConnect group-alias

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

Review the ip options

inspect the netbios

inspect the rsh

inspect the rtsp

inspect the skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect the tftp

inspect the sip

inspect xdmcp

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:30fadff4b400e42e73e17167828e046f

: end

Hello

No worries

As we change the config I would do as well as possible.

First, it is strongly recommended to use a different range of IP addresses for VPN clients and the internal network

No VPN_Pool 192.168.250.100 - 192.168.250.101 255.255.255.0 ip local pool mask

mask 192.168.251.100 - 192.168.251.101 255.255.255.0 IP local pool VPN_Pool

NAT_0 ip 192.168.250.0 access list allow 255.255.255.0 192.168.251.0 255.255.255.0

NAT (inside) 0-list of access NAT_0

Then give it a try and it work note this post hehe

ASA problem inside the VPN client routing

Hello

I have a problem where I can't reach the VPN clients with their vpn IP pool from the inside or the asa itself. Connect VPN clients can access internal network very well. I have no nat configured for the pool of vpn and packet trace crypt packages and puts it into the tunnel. I'm not sure what's wrong.

Here are a few relevant config:

network object obj - 192.168.245.0

192.168.245.0 subnet 255.255.255.0

192.168.245.1 - 192.168.245.50 vpn IP local pool

NAT (inside, outside) static source any any destination static obj - 192.168.245.0 obj - 192.168.245.0 no-proxy-arp-search to itinerary

Out of Packet trace:

Firewall # entry packet - trace inside the x.x.x.x icmp 8 0 192.168.245.33

Phase: 1

Type: ACCESS-LIST

Subtype:

Result: ALLOW

Config:

Implicit rule

Additional information:

MAC access list

Phase: 2

Type:-ROUTE SEARCH

Subtype: entry

Result: ALLOW

Config:

Additional information:

in 192.168.245.33 255.255.255.255 outside

Phase: 3

Type: ACCESS-LIST

Subtype: Journal

Result: ALLOW

Config:

Access-group acl-Interior interface inside

access list acl-Interior extended icmp permitted an echo

Additional information:

Phase: 4

Type: IP-OPTIONS

Subtype:

Result: ALLOW

Config:

Additional information:

Phase: 5

Type: INSPECT

Subtype: np - inspect

Result: ALLOW

Config:

Additional information:

Phase: 6

Type:

Subtype:

Result: ALLOW

Config:

Additional information:

Phase: 7

Type: NAT

Subtype:

Result: ALLOW

Config:

NAT (inside, outside) static source any any destination static obj - 192.168.245.0

obj - 192.168.245.0 no-proxy-arp-search to itinerary

Additional information:

Definition of static 0/x.x.x.x-x.x.x.x/0

Phase: 8

Type: VPN

Subtype: encrypt

Result: ALLOW

Config:

Additional information:

Phase: 9

Type: CREATING STREAMS

Subtype:

Result: ALLOW

Config:

Additional information:

New workflow created with the 277723432 id, package sent to the next module

Result:

input interface: inside

entry status: to the top

entry-line-status: to the top

output interface: outside

the status of the output: to the top

output-line-status: to the top

Action: allow

There is no route to the address pool of vpn. Maybe that's the problem? I don't know than that used to work before we went to 8.4.

Check if the firewall is enabled on your host from the client ravpn and blocking your pings.

Limit bandwidth for VPN users

Hi guys,.

I use ASA Version 8.2 (1), I want to limit vpn users to use less bandwidth of my Interlink to access something on the inside of the network

example: source vpn pool

Destn: inside the network

Please let me know how to achieve this with QOS config.

Hello

Probably the best would be to match groups of tunnel.
```
class-map TG1-best-effort 
```
```
match tunnel-group Tunnel-Group-1 
```
```
match flow ip destination-address 
```
Then this traffic in police policy-map and apply the service policy to the external interface (since you want to traffic police from your home). You can also use the pool for vpn access lists.

For more details, please see:

http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/QoS.html

ASA - several IPS for VPN

Similar Questions

Maybe you are looking for