ASDM from 6.2 (5) 53 to 'asdm - 631.bin.
Try to upgrade to Assistant Deputy Ministers. I get this message when you set the asdm image order:
Together images from Device Manager, but not a image valid file disk0: / asdm - 631.bin
I know that some features are not available in 8.3 with 512 MB. Is this one of them?
Material: asa 5520
Currently running:
Cisco Adaptive Security Appliance Software Version 8.3 (1)
Version 6.2 Device Manager (5) 53
Updated Friday, March 4, 10 16:56 by manufacturers
System image file is "disk0: / asa831 - k8.bin.
The configuration file to the startup was "startup-config '.
Material: ASA5520, 512 MB RAM, Pentium 4 Celeron 2000 MHz processor
Internal ATA Compact Flash, 256 MB
BIOS Flash M50FW080 @ 0xfff00000, 1024 KB
What is wrong with this picture: -.
--#---longueur - time - path.
180 17199 June 7, 2010 10:30:06 asdm - 631.bin
134 11491880 June 7, 2010 09:53:42 asdm - 623.bin
Your bin file from 631. is an incomplete image file.
HTH >
Tags: Cisco Security
Similar Questions
-
Set of images of Device Manager, but not a valid image of the flash file: / asdm - 512.bin
I'm putting this new image that I have loaded by ASDM version 5.0 and the name of the image is in my config and I wrote from memory, but all I get is the error message above.
Hello
Referring to the new image of ASDM image ASA (pix 7.x) file?
Anyway, if it doesn't work, try reinstalling the image again through CLI.
a. to load image PIX 7.0-> copy flash tftp:
b. to load ASDM image-> copy tftp flash: asdm
* Make sure that the tftp Protocol is ready, and probably to remove previous load from file.
Once the installation is completed and after reboot, check the loaded file using 'sh version' command. You can also use 'sh bootvar' command to check system startup properties and image which is responsible for operating the unit.
Rgds,
AK
-
How can I be deleted from all audio files are in a specific bin?
I do a lot of VoiceOver, and I find myself with tons of audio files cluttering up my part of the project.
How to define them to all go in a specific tray to keep them out of my way?
Thank you for your time and help guys!
first seems simply place the new record in the current location in the location of the project. you could make a new bin called VO and open for registration for the first place in this tray. You can also open the voice more bin as a new tab in the Panel, with this active prior to registration and then switch to bin panels to return to the regular/last location.
-
ASA 5505 as internet gateway (must reverse NAT)
Hi all the Cisco guru
I have this diet:
Office-> Cisco 877-> Internet-> ASA 5505-> remote network
Office network: 192.168.10.0/24
Cisco 877 IP internal: 192.168.10.200
Cisco 877 external IP: a.a.a.a
ASA 5505 external IP: b.b.b.b
ASA 5505 internal IP: 192.168.1.3 and 192.168.17.3
Remote network: 192.168.17.0/24 and 192.168.1.0/24
VPN tunnel is OK and more. I have the Office Access to the remote network and the remote network access to the bureau by the tunnel.
But when I try to access the network remotely (there are 2 VLANS: management and OLD-private) to the internet, ASA answer me:
305013 *. * NAT rules asymetrique.64.9 matched 53 for flows forward and backward; Connection for udp src OLD-Private:192.168.17.138/59949 dst WAN:*.*.64.9/53 refused due to path failure reverse that of NAT
Ping of OLD-private interface to google result:
110003 192.168.17.2 0 66.102.7.104 0 routing cannot locate the next hop for icmp NP identity Ifc:192.168.17.2/0 to OLD-Private:66.102.7.104/0
Result of traceroute
How can I fix reverse NAT and make ASA as internet gateway?
There is my full config
!
ASA Version 8.2 (2)
!
hostname ASA2
domain default.domain.invalid
activate the encrypted password password
encrypted passwd password
names of
!
interface Vlan1
Description INTERNET
1234.5678.0002 Mac address
nameif WAN
security-level 100
IP address b.b.b.b 255.255.248.0
OSPF cost 10
!
interface Vlan2
OLD-PRIVATE description
1234.5678.0202 Mac address
nameif OLD-private
security-level 0
IP 192.168.17.3 255.255.255.0
OSPF cost 10
!
interface Vlan6
Description MANAGEMENT
1234.5678.0206 Mac address
nameif management
security-level 0
192.168.1.3 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
!
interface Ethernet0/1
Shutdown
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
switchport trunk allowed vlan 2.6
switchport mode trunk
!
interface Ethernet0/7
Shutdown
!
connection of the banner * W A R N I N G *.
banner connect unauthorized access prohibited. All access is
connection banner monitored, and intruders will be prosecuted
connection banner to the extent of the law.
Banner motd * W A R N I N G *.
Banner motd unauthorised access prohibited. All access is
Banner motd monitored and trespassers will be prosecuted
Banner motd to the extent of the law.
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS domain-lookup WAN
DNS server-group DefaultDNS
Server name dns.dns.dns.dns
domain default.domain.invalid
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
RDP description
EQ port 3389 object
Access extensive list ip 192.168.17.0 LAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Standard access list LAN_IP allow 192.168.17.0 255.255.255.0
WAN_access_in list of allowed ip extended access all any debug log
WAN_access_in list extended access permitted ip OLD-private interface WAN newspaper inactive debugging interface
WAN_access_in list extended access permit tcp any object-group RDP any RDP log debugging object-group
MANAGEMENT_access_in list of allowed ip extended access all any debug log
access-list extended OLD-PRIVATE_access_in any allowed ip no matter what debug log
access-list OLD-PRIVATE_access_in extended permit ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0 inactive debug log
OLD-PRIVATE_access_in allowed extended object-group TCPUDP host 192.168.10.7 access-list no matter how inactive debug log
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.10.254 interface private OLD newspaper inactive debugging
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.17.155 interface private OLD newspaper debugging
access-list 101 extended allow host tcp 192.168.10.7 any eq 3389 debug log
Access extensive list ip 192.168.17.0 WAN_1_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
Capin list extended access permit ip host 192.18.17.155 192.168.10.7
Capin list extended access permit ip host 192.168.10.7 192.168.17.155
LAN_access_in list of allowed ip extended access all any debug log
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Access extensive list ip 192.168.17.0 WAN_2_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0
pager lines 24
Enable logging
recording of debug trap
logging of debug asdm
Debugging trace record
Debug class auth record trap
MTU 1500 WAN
MTU 1500 OLD-private
MTU 1500 management
mask 192.168.1.150 - 192.168.1.199 255.255.255.0 IP local pool VPN_Admin_IP
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP permitted host a.a.a.a WAN
ICMP deny any WAN
ICMP permitted host 192.168.10.7 WAN
ICMP permitted host b.b.b.b WAN
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
Global (OLD-private) 1 interface
Global interface (management) 1
NAT (WAN) 1 0.0.0.0 0.0.0.0inside_nat0_outbound (WAN) NAT 0 access list
WAN_access_in access to the WAN interface group
Access-group interface private-OLD OLD-PRIVATE_access_in
Access-group MANAGEMENT_access_in in the management interface
Route WAN 0.0.0.0 0.0.0.0 b.b.b.185 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.1.0 255.255.255.0 WAN
http 0.0.0.0 0.0.0.0 WAN
http b.b.b.b 255.255.255.255 WAN
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto WAN_map 1 corresponds to the address WAN_1_cryptomap
card crypto WAN_map 1 set peer a.a.a.a
WAN_map 1 transform-set ESP-DES-SHA crypto card game
card crypto WAN_map WAN interface
ISAKMP crypto enable WAN
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
sha hash
Group 1
life 86400
Telnet timeout 5
SSH a.a.a.a 255.255.255.255 WAN
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd auto_config management
!a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 129.6.15.28 source WAN prefer
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal admin group strategy
group admin policy attributes
DNS.DNS.DNS.DNS value of DNS server
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list LAN_IP
privilege of encrypted password password username administrator 15
type tunnel-group admin remote access
tunnel-group admin general attributes
address pool VPN_Admin_IP
strategy-group-by default admin
tunnel-group a.a.a.a type ipsec-l2l
tunnel-group a.a.a.a general-attributes
strategy-group-by default admin
a.a.a.a group of tunnel ipsec-attributes
pre-shared-key *.
NOCHECK Peer-id-validate
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!Thank you for your time and help
Why you use this NAT type?
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 any
NAT (OLD-private) 0-list of access WAN_nat0_outboundYou are basically saying the ASA not NAT traffic. This private IP address range is not routed on the Internet. This traffic is destined to be sent over the Internet? If so, that LAC should then not be there.
If you want NAT traffic to one IP public outside the ASA, you must remove this line and let the NAT and GLOBAL work:
NAT (OLD-private) 1 0.0.0.0 0.0.0.0
Global (WAN) 1 interface
-
Unable to access company LAN via VPN
Hello
I have an ASA 5505 that I used to test run them the IPSec VPN connection after having studied the different configs and crossing the ASDM I get the same question that I can not receive any traffic.
The company LAN is on a 10.8.0.0 255.255.0.0 network, I placed the VPN clients in 192.168.10.0 255.255.255.0 network, 192 clients may not speak on the 10.8 network.
On the Cisco VPN client, I see a lot of packets sent but no receipt.
I think it could be to do with NAT, but the examples I've seen I think it should work.
I have attached the complete running-config, I might well have missed something.
Thanks a lot for all the help on this...
FWBKH (config) # show running-config
: Saved
:
ASA Version 8.2 (2)
!
hostname FWBKH
test.local domain name
activate the encrypted password of XXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXX
names of
name 9.9.9.9 zscaler-uk-network
name 10.8.50.0 Interior-network-it
Interior-nameservers 10.8.112.0
name 17.7.9.10 fwbkh-output
name 10.8.127.200 fwbkh - in
name 192.168.10.0 bkh-vpn-pool
!
interface Vlan1
nameif inside
security-level 100
IP fwbkh 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP fwbkh-out 255.255.255.248
!
interface Vlan3
nameif vpn
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Ethernet0/0
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
Shutdown
!
banner intruder connection will be shot, survivors will be prosecuted!
Banner motd intruder will be Shot, survivors will be prosecuted!
banner intruder asdm will be Shot, survivors will be prosecuted!
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
test.local domain name
DM_INLINE_TCP_2 tcp service object-group
port-object eq www
EQ object of the https port
DM_INLINE_UDP_1 udp service object-group
port-object eq 4500
port-object eq isakmp
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-protocol udp
inside_access_in list extended access permitted tcp 10.8.0.0 255.255.0.0 any object-group DM_INLINE_TCP_2 journal of inactive warnings
inside_access_in list allowed extended access computer-network-inside ip 255.255.255.0 any idle state
inside_access_in list extended access permitted tcp 10.8.0.0 255.255.0.0 host zscaler-uk-network eq www
inside_access_in list extended access allowed inside-servers ip 255.255.255.0 log warnings
list of access USER-ACL extended permitted tcp 10.8.0.0 255.255.0.0 any eq www
list of access USER-ACL extended permitted tcp 10.8.0.0 255.255.0.0 any https eq
outside_nat0_outbound list allowed extended access bkh-vpn-pool ip 255.255.255.0 10.8.0.0 255.255.0.0
outside_access_in list extended access permit udp any host fwbkh-out object-group DM_INLINE_UDP_1 errors in the inactive log
inside_nat0_outbound list extended access allowed object-group DM_INLINE_PROTOCOL_1 10.8.0.0 255.255.0.0 any
inside_nat0_outbound_1 to access extended list ip 10.8.0.0 allow 255.255.0.0 255.255.255.0 bkh-vpn-pool
UK-VPN-USERS_splitTunnel of the access list extended ip 10.8.0.0 allow 255.255.0.0 255.255.255.0 bkh-vpn-pool
UK-VPN-USERS_splitTunnel to the list of allowed extensive access inside-servers 255.255.255.0 bkh-vpn-pool ip 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 VPN
mask UK-VPN-POOL 192.168.10.10 - 192.168.10.60 255.255.255.0 IP local pool
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
NAT-control
Global (inside) 1 interface
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound_1
NAT (inside) 1 10.8.0.0 255.255.0.0 dns
NAT (0 outside_nat0_outbound list of outdoor outdoor access)
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 17.7.9.10 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 10.8.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint BKHFW
registration auto
name of the object CN = FWBKH
Configure CRL
encryption BKHFW ca certificate chain
certificate fc968750
308201dd a0030201 30820146 020204fc 96875030 0d06092a 864886f7 0d 010105
310e300c b 05003033 06035504 03130546 57424, 48 3121301f 06092 has 86 4886f70d
ccc6f3cb 977029d 5 df42515f d35c0d96 798350bf 7472725c fb8cd64d 514dc9cb
7f05ffb9 b3336388 d55576cc a3d308e1 88e14c1e 8bcb13e5 c58225ff 67144c 53 f2
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.8.0.0 255.255.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
strategy of UK-VPN-USERS group internal
UK-VPN-USERS group policy attributes
value of 10.8.112.1 DNS server 10.8.112.2
Protocol-tunnel-VPN IPSec svc
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value UK-VPN-USERS_splitTunnel
test.local value by default-field
the address value UK-VPN-POOL pools
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol webvpn
username admin encrypted XXXXXXXXXXXXXXXXX privilege 15 password
karl encrypted XXXXXXXXXXXXXXX privilege 15 password username
type tunnel-group UK-VPN-USERS remote access
attributes global-tunnel-group UK-VPN-USERS
Address UK-VPN-POOL-pool
Group Policy - by default-UK-VPN-USERS
tunnel-group USERS of the UK VPN-ipsec-attributes
pre-shared key *.
type tunnel-group IT - VPN remote access
General attributes of IT - VPN Tunnel-group
Address UK-VPN-POOL-pool
Group Policy - by default-UK-VPN-USERS
tunnel-group IT - VPN ipsec-attributes
pre-shared key *.
!
ALLOW-USER-CLASS of the class-map
corresponds to the USER-ACL access list
type of class-card inspect all http ALLOW-URL-CLASS match
match without the regex ZSGATEWAY ALLOW request headers
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
type of policy-card inspect http ALLOW-URL-POLICY
parameters
ALLOW-URL-class
drop connection
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
Policy-map ALLOW-USER-URL-POLICY
ALLOW-USER-class
inspect the http
!
global service-policy global_policy
USER-URL-POLICY-ALLOW service-policy inside interface
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:00725d3158adc23e6a2664addb24fce1
: end
Hi Karl,
Please, make the following changes:
local IP VPN_POOL_UK_USERS 192.168.254.1 pool - 192.168.254.254
access extensive list 10.8.0.0 ip inside_nat0_outbound_1 255.255.0.0 allow 192.168.254.0 255.255.255.0
!
no nat (0 outside_nat0_outbound list of outdoor outdoor access)
!
UK-VPN-USERS_SPLIT of the allowed access list 10.8.0.0 255.255.0.0
!
UK-VPN-USERS group policy attributes
Split-tunnel-network-list value UK-VPN-USERS_SPLIT
!
No UK-VPN-USERS_splitTunnel scope 10.8.0.0 ip access list do not allow 255.255.0.0 255.255.255.0 bkh-vpn-pool
No list of UK-VPN-USERS_splitTunnel extended access not allowed inside-servers 255.255.255.0 bkh-vpn-pool ip 255.255.255.0
!
inside_access_in to access extended list ip 10.8.0.0 allow 255.255.255.0 192.168.254.0 255.255.255.0
!
management-access inside
******'
As you can see, I have create a new pool, since you already have an interface in the 192.168.10.0/24 network, which affects VPN clients.
Once you have finished, connect the client and try:
Ping 10.8.127.200
It work?
Try to ping so another internal IP.
Let me know how it goes.
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
-
Problem VPN ASA 5505 8.3 (1) a site
Hello
My problem is with VPN site-to-site. It's between ASA5505 8.3 (1) and Pix 501 6.3 (5). The tunnel is created between them and it's good, here you have the results to see the crypto ipsec's and isakmp his
ciscoasa # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1
1 peer IKE: 91.X.X.57
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE
ciscoasa # sh crypto ipsec his
Interface: outside
Tag crypto map: outside_map, seq num: 1, local addr: 79.X.X.2
list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.11.0/255.255.255.0/0/0)
current_peer: 91.X.X.57
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 3757, #pkts decrypt: 3757, #pkts check: 3757
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
local crypto endpt. : 79.X.X.2/0, remote Start crypto. : 91.X.X.57/0
Path mtu 1500, fresh ipsec generals 74, media, mtu 1500
current outbound SPI: F1C2FD46
current inbound SPI: 1BCF8C49
SAS of the esp on arrival:
SPI: 0x1BCF8C49 (466586697)
transform: aes-256-esp esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 376832, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4373665/20348)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0xFFFFFFFF to 0xFFFFFFFF
outgoing esp sas:
SPI: 0xF1C2FD46 (4056087878)
transform: aes-256-esp esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 376832, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4374000/20348)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
But the problem is, as you can see in a show crypto ipsec sa, there is now traffic to a remote network of ASA
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
I have a single device on the remote network sends data to a sysloger on the local network and it works fine, all received messages but not other way to traffic.
To make sure that I go see the Nat and packet - trace entry inside tcp 192.168.10.7 1024 192.168.11.250 80 and looks like SHEEP works very well and traffic is allowed, but still once anything gets into the tunnel of local network
Results
ciscoasa # sh nat
Manual NAT policies (Section 1)
1 (one) to (all) source static sheep sheep sheep destination static sheep
translate_hits = 0, untranslate_hits = 38770
2 (inside) for the service public static obj - the source (on the outside) TCP1433 TCP1433 79.X.X.5 192.168.10.7
translate_hits = 0, untranslate_hits = 95
3 (inside) to the source (external) static obj - 192.168.10.7 interface service zzz zzz
translate_hits = 0, untranslate_hits = 19
4 (inside) of the (whole) source static obj - 10.0.0.0 obj - 10.0.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
translate_hits = 17, untranslate_hits = 0
5 (inside) of the (whole) source static obj - obj - static 192.168.10.0 192.168.10.0 obj - obj-destination 10.1.1.1 10.1.1.1
translate_hits = 134, untranslate_hits = 0
6 (inside) to the (whole) source static obj - 10.1.1.1 obj - 10.1.1.1 destination static obj - 192.168.10.0 obj - 192.168.10.0
translate_hits = 0, untranslate_hits = 0
7 (inside) of the (whole) source static obj - 192.168.0.0 obj - 192.168.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
translate_hits = 172, untranslate_hits = 53
Auto NAT policies (Section 2)
1 (inside) (outside) source static obj - 192.168.10.3 service TCP 3389 3389 79.X.X.5
translate_hits = 12, untranslate_hits = 4823
2 (inside) (outside) source static obj - 192.168.10.5 79.X.X.3 DNS
translate_hits = 341869, untranslate_hits = 41531
3 (inside) (outside) source static obj - 192.168.10.3 - 01 79.X.X.5 service TCP 444 444
translate_hits = 0, untranslate_hits = 0
4 (inside) to the source (external) static obj - 192.168.10.7 tcp 3389 3389 service interface
translate_hits = 21, untranslate_hits = 751
5 (inside) (outside) source static obj - 192.168.10.7 - 02 interface tcp 8080 https service
translate_hits = 0, untranslate_hits = 100
6 (inside) (outside) source static obj - 192.168.10.11 79.X.X.5 TCP smtp smtp service
translate_hits = 2, untranslate_hits = 18838
7 (inside) (outside) source static obj - 192.168.10.11 - 01 udp 443 443 service 79.X.X.5
translate_hits = 0, untranslate_hits = 0
8 (inside) (outside) source static obj - 192.168.10.11 - 02 79.X.X.5 tcp https https service
translate_hits = 221, untranslate_hits = 9770
9 (inside) (outside) source static obj - 192.168.10.11 - 03 79.X.X.5 tcp https https service
translate_hits = 0, untranslate_hits = 0
10 (inside) (outside) source static obj - 192.168.10.15 79.X.X.5 service tcp www 81
translate_hits = 0, untranslate_hits = 34
11 (inside) (outside) source static obj - 192.168.10.26 79.X.X.5 service TCP 8080 8080
translate_hits = 9, untranslate_hits = 4407
12 (inside) (outside) source static obj - 192.168.10.26 - 01 79.X.X.5 tcp 8080 www service
translate_hits = 0, untranslate_hits = 578
13 (inside) (outside) source static obj - 192.168.10.220 79.X.X.6 service TCP 3389 3389
translate_hits = 0, untranslate_hits = 41
14 (inside) (outside) source static obj - 192.168.10.220 - 1 79.X.X.6 tcp https https service
translate_hits = 0, untranslate_hits = 3
15 (inside) to the obj_any interface dynamic source (external)
translate_hits = 410005, untranslate_hits = 144489
16 (invited) to dynamic interface of the source (outside) obj_any-01
translate_hits = 19712, untranslate_hits = 4490
ciscoasa # packet - trace entry inside tcp 192.168.10.7 1024 192.168.11.250 80
Phase: 1
Type: UN - NAT
Subtype: static
Result: ALLOW
Config:
NAT (any, any) source static sheep sheep sheep destination static sheep
Additional information:
NAT divert on exit to the outside interface
Untranslate 192.168.11.250/80 to 192.168.11.250/80
Phase: 2
Type: ACCESS-LIST
Subtype: Journal
Result: ALLOW
Config:
Access-group inside_out in interface inside
access-list extended inside_out permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
Additional information:
Direct flow from returns search rule:
ID = 0xd9886ae8, priority = 13, area = allowed, deny = false
hits = 18503, user_data = 0xd6581290, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd80c87c8, priority = 0, sector = inspect-ip-options, deny = true
hits = 1047092, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
NAT (any, any) source static sheep sheep sheep destination static sheep
Additional information:
Direct flow from returns search rule:
ID = 0xd9859830, priority = 6, area = nat, deny = false
hits = 2107, user_data = 0xd83a9b48, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = none, output_ifc = any
Phase: 5
Type: HOST-LIMIT
Subtype:
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd8114d98, priority = 0, domain = host-limit, deny = false
hits = 674350, user_data = 0 x 0, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
input_ifc = output_ifc = any to inside,
Phase: 6
Type: VPN
Subtype: encrypt
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd83a9960, priority = 70, domain = encrypt, deny = false
hits = 26732, user_data = 0xce165c, cs_id = 0xd83ad0e8, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = none, output_ifc = external
Phase: 7
Type: NAT
Subtype: rpf check
Result: ALLOW
Config:
NAT (any, any) source static sheep sheep sheep destination static sheep
Additional information:
Direct flow from returns search rule:
ID = 0xd98d1d70, priority = 6, area = nat-reversed, deny = false
hits = 1419, user_data = 0xd83a9b48, cs_id = 0 x 0, use_real_addr, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = none, output_ifc = any
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional information:
Reverse flow from returns search rule:
ID = 0xd9bda388, priority = 69 = ipsec-tunnel-flow area, deny = false
hits = 486, user_data is 0x13492cc, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.11.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.10.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0
input_ifc = out, output_ifc = any
Phase: 9
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Reverse flow from returns search rule:
ID = 0xd8192ab0, priority = 0, sector = inspect-ip-options, deny = true
hits = 1169899, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
input_ifc = out, output_ifc = any
Phase: 10
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 1293619 id, package sent to the next module
Information module for forward flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_tcp_normalizer
snp_fp_translate
snp_fp_adjacency
snp_fp_encrypt
snp_fp_fragment
snp_ifc_stat
Information for reverse flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_ipsec_tunnel_flow
snp_fp_translate
snp_fp_tcp_normalizer
snp_fp_adjacency
snp_fp_fragment
snp_ifc_stat
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allow
It is a complete config for ASA
VPN
Network local 192.168.10.0/24
remote network 192.168.11.0/24
Config
:
ASA Version 8.3 (1)
!
ciscoasa hostname
domain.com domain name
activate the password * encrypted
passwd * encrypted
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 79.X.X.2 255.255.255.248
!
interface Vlan12
prior to interface Vlan1
nameif comments
security-level 80
192.168.4.1 IP address 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 2
!
interface Ethernet0/6
!
interface Ethernet0/7
switchport access vlan 12
!
boot system Disk0: / asa831 - k8.bin
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 192.168.10.11
domain.com domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network object obj - 192.168.0.0
Subnet 192.168.0.0 255.255.0.0
network object obj - 192.168.2.0
Subnet 192.168.2.0 255.255.255.128
network object obj - 10.0.0.0
subnet 10.0.0.0 255.0.0.0
network object obj - 192.168.10.2
host 192.168.10.2
network object obj - 192.168.10.2 - 01
host 192.168.10.2
network object obj - 192.168.10.3
host 192.168.10.3
network object obj - 192.168.10.2 - 02
host 192.168.10.2
network object obj - 192.168.10.2 - 03
host 192.168.10.2
network object obj - 192.168.10.3 - 01
Home 192.168.10.7
network object obj - 192.168.10.5
host 192.168.10.5
newserver network object
Home 192.168.10.7
New SQL Server description
network object obj - 192.168.10.7
Home 192.168.10.7
network of the A_79.X.X.6 object
Home 79.X.X.6
network of the PublicServer_NAT1 object
Home 192.168.10.7
zzz service object
service source eq 1 65535 udp syslog destination range
Syslog description
purpose of the 79.X.X.5 network
Home 79.X.X.5
service of the TCP1433 object
destination service tcp source eq 1433 1 65535 range
Description TCP1433
network object obj - 192.168.10.220
Home 192.168.10.220
network object obj - 192.168.10.220 - 1
Home 192.168.10.220
network object obj - 192.168.10.222
Home 192.168.10.222
network object obj - 192.168.10.2 - 04
host 192.168.10.2
network object obj - 192.168.10.7 - 02
Home 192.168.10.7
network object obj - 192.168.10.11
Home 192.168.10.11
network object obj - 192.168.10.11 - 01
Home 192.168.10.11
network object obj - 192.168.10.11 - 02
Home 192.168.10.11
network object obj - 192.168.10.11 - 03
Home 192.168.10.11
network object obj - 192.168.10.26
Home 192.168.10.26
network object obj - 192.168.10.26 - 01
Home 192.168.10.26
network object obj - 192.168.10.15
Home 192.168.10.15
network object obj - 192.168.10.11 - 04
Home 192.168.10.11
network object obj - 10.1.1.1
host 10.1.1.1
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.0
network object obj - 192.168.10.220 - 2
Home 192.168.10.220
network vpn-local object
192.168.10.0 subnet 255.255.255.0
object network vpn - ru
subnet 192.168.11.0 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
network obj_any-01 object
subnet 0.0.0.0 0.0.0.0
object-group service syslog udp
Service Description syslog group
port-object eq syslog
object-group service udp zzzz
port-object eq syslog
object-group service sss udp
port-object eq syslog
object-group network sheep
object-network 192.168.10.0 255.255.255.0
object-network 192.168.11.0 255.255.255.0
object-network 192.168.3.0 255.255.255.0
outside_all of access allowed any ip an extended list
VPN_splitTunnelAcl list standard access allowed 192.168.0.0 255.255.0.0
VPN_splitTunnelAcl list standard access allowed 10.0.0.0 255.0.0.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.2.0 255.255.255.128
inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 192.168.2.0 255.255.255.128
access-list extended inside_out allow ip 192.168.11.0 255.255.255.0 192.168.10.0 255.255.255.0
access-list extended inside_out permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
scope of the inside_out to the list of permitted any one ip access
inside_out to the access list extended 192.168.11.0 allowed any ip 255.255.255.0
inside_out to the list of access permit tcp host 192.168.10.2 any eq smtp
inside_out to the list of access permit tcp any any eq smtp
access-list extended inside_out allow udp 192.168.10.0 255.255.255.0 host 10.1.1.1
access-list extended inside_out permit udp host 10.1.1.1 192.168.10.0 255.255.255.0
inside_out to the list of allowed extensive access icmp host 192.168.10.7 all
inside_out to the list of allowed extensive access a whole icmp
outside_zzz list of allowed ip extended access any external interface
outside_zzz list extended access permit tcp host 87.X.X.73 host 79.X.X.5 eq 1433
outside_zzz tcp extended access list refuse any host 79.X.X.5 eq 1433
outside_zzz list extended access permitted tcp 207.126.144.0 255.255.240.0 eq 79.X.X.5 the smtp host
outside_zzz tcp extended access list refuse any host 79.X.X.5 eq smtp
outside_zzz access-list extended permit ip any host 79.X.X.5
outside_zzz of access allowed any ip an extended list
permit access list extended ip 192.168.10.0 outside_in 255.255.255.0 192.168.11.0 255.255.255.0
access extensive list ip 192.168.11.0 outside_in allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.11.0 outside_in allow 255.255.255.0 any
outside_in list extended access permit tcp any host 192.168.10.15 eq 81
outside_in list extended access permit ip any host 192.168.10.5
access-list outside_in extended permit ip any host 79.X.X.4
outside_in list extended access permit tcp host 82.X.X.166 host 192.168.10.7 eq 1433
outside_in list extended access permit tcp host 84.X.X.30 host 192.168.10.7 eq 1433
outside_in list extended access tcp refuse any host 192.168.10.7 eq 1433
outside_in list extended access permit tcp any host 192.168.10.3 eq 444
outside_in list extended access permitted tcp 207.126.144.0 255.255.240.0 host 192.168.10.11 eq 444
outside_in list extended access permitted tcp 207.126.144.0 255.255.240.0 eq smtp host 192.168.10.11
outside_in list extended access permitted tcp 207.126.144.0 255.255.240.0 host 192.168.10.2 eq smtp
outside_in list extended access tcp refuse any host 192.168.10.11 eq smtp
outside_in list extended access tcp refuse any host 192.168.10.2 eq smtp
outside_in list extended access permit tcp any host 192.168.10.2 eq smtp
outside_in list extended access permit udp any host 192.168.10.2 eq 443
outside_in list extended access permit tcp any host 192.168.10.3 eq 3389
outside_in list extended access permit tcp any host 192.168.10.2 eq 4125
outside_in list extended access permit tcp any host 192.168.10.11 eq https
outside_in list extended access permit tcp any host 192.168.10.2 eq https
outside_in list extended access allowed esp all the host 91.X.X.57
outside_in list extended access permit tcp any host 192.168.10.3 eq 1433
access-list extended outside_in permit ip host 91.X.X.57 all
access-list outside_in extended permit ip any host 79.X.X.5
access-list outside_in extended permit ip any host 79.X.X.2
outside_in list extended access permit tcp any host 79.X.X.6 eq 3389
outside_in list extended access permit tcp any host 192.168.10.220 eq 3389
outside_in list extended access permit tcp any host 79.X.X.5 eq 81
access extensive list permits all ip a outside_in
outside_in list extended access permit tcp host 91.X.X.178 host 192.168.10.7 eq 1433
outside_in list extended access permit tcp host 87.X.X.73 host 192.168.10.7 eq 1433
access-list extended qnap permit ip host 192.168.10.26 all
access-list extended qnap permit ip any host 192.168.10.26
phone_bypass list extended access allowed host 10.1.1.1 ip 192.168.10.0 255.255.255.0
permit phone_bypass to access extended list ip 192.168.10.0 255.255.255.0 host 10.1.1.1
phone_bypass list extended access allowed host 10.1.1.1 ip 192.168.2.0 255.255.255.0
phone_bypass to access extended list ip 192.168.2.0 allow 255.255.255.0 host 10.1.1.1
list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
extended vpn 192.168.11.0 ip access list allow 255.255.255.0 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
exploitation forest-size of the buffer 1024000
logging asdm-buffer-size 512
logging buffered information
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
Comments of MTU 1500
mask of local pool RemoteVPN 192.168.2.20 - 192.168.2.100 IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 631.bin
enable ASDM history
ARP timeout 14400
NAT (any, any) source static sheep sheep sheep destination static sheep
NAT source service (Interior, exterior) static obj - 192.168.10.7 79.X.X.5 TCP1433 TCP1433
NAT (inside, outside) source static obj - 192.168.10.7 interface service zzz zzz
NAT (inside, all) source static obj - 10.0.0.0 obj - 10.0.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
NAT (inside, all) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 10.1.1.1 obj - 10.1.1.1
NAT (inside, all) source static obj - 10.1.1.1 obj - 10.1.1.1 destination static obj - 192.168.10.0 obj - 192.168.10.0
NAT (inside, all) source static obj - 192.168.0.0 obj - 192.168.0.0 destination static obj - 192.168.2.0 obj - 192.168.2.0
!
network object obj - 192.168.10.3
NAT (inside, outside) static service tcp 3389 3389 79.X.X.5
network object obj - 192.168.10.3 - 01
NAT (inside, outside) static 79.X.X.5 tcp 444 444 service
network object obj - 192.168.10.5
NAT (inside, outside) public static dns 79.X.X.3
network object obj - 192.168.10.7
NAT (inside, outside) interface static service tcp 3389 3389
network object obj - 192.168.10.220
NAT (inside, outside) static service tcp 3389 3389 79.X.X.6
network object obj - 192.168.10.220 - 1
NAT (inside, outside) static 79.X.X.6 tcp https https service
network object obj - 192.168.10.7 - 02
NAT (inside, outside) interface static tcp 8080 https service
network object obj - 192.168.10.11
NAT (inside, outside) static 79.X.X.5 tcp smtp smtp service
network object obj - 192.168.10.11 - 01
NAT (inside, outside) udp 443 443 service 79.X.X.5 static
network object obj - 192.168.10.11 - 02
NAT (inside, outside) static 79.X.X.5 tcp https https service
network object obj - 192.168.10.11 - 03
NAT (inside, outside) static 79.X.X.5 tcp https https service
network object obj - 192.168.10.26
NAT (inside, outside) static 79.X.X.5 8080 8080 tcp service
network object obj - 192.168.10.26 - 01
NAT (inside, outside) static 79.X.X.5 tcp 8080 www service
network object obj - 192.168.10.15
NAT (inside, outside) static 79.X.X.5 tcp 81 www service
network obj_any object
NAT dynamic interface (indoor, outdoor)
network obj_any-01 object
NAT dynamic interface (guest, outdoor)
Access-group inside_out in interface inside
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 79.X.X.1 1
Route inside 10.0.0.0 255.0.0.0 192.168.10.4 1
Route outside 10.1.1.1 255.255.255.255 192.168.10.4 1
Route outside 192.168.11.0 255.255.255.0 79.X.X.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS Protocol RADIUS AAA server
reactivation impoverishment deadtime mode 1
AAA-server RADIUS (inside) host 192.168.10.7
key *.
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
LOCAL AAA authorization command
http server enable 444
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
No vpn sysopt connection permit
Service resetoutside
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-SHA 256 - aes - esp esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card crypto outside_map 1 match for vpn
outside_map game 1 card crypto peer 91.X.X.57
card crypto outside_map 1 set of transformation-ESP-AES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
Crypto isakmp nat-traversal 3600
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
Console timeout 0
dhcpd dns 83.X.X.8 83.X.X.10
dhcpd outside auto_config
!
dhcpd address 192.168.10.50 - 192.168.10.100 inside
dhcpd dns 83.X.X.8 83.X.X.10 interface inside
dhcpd lease interface 600 inside
dhcpd interface to domain.com domain inside
!
Reviews of dhcpd address 192.168.4.50 - 192.168.4.100
Dhcpd lease 600 interface comments
Comments enable dhcpd
!
priority queue inside
priority-queue outdoors
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP 93.170.32.1 Server
NTP 93.170.32.2 Server
NTP 89.145.68.17 Server prefer
WebVPN
allow outside
SVC image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 regex 'Windows NT'
SVC image disk0:/anyconnect-wince-ARMv4I-2.4.1012-k9.pkg 2 regex "Windows CE"
enable SVC
Auto-signon allow ip 192.168.0.0 255.255.0.0 basic auth-type
internal l2l group policy
attributes of the l2l group policy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.10.11
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_splitTunnelAcl
value by default-field DOMAINl.local
internal VPNv group strategy
attributes of Group Policy VPNv
value of server DNS 192.168.10.11
Protocol-tunnel-VPN IPSec webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_splitTunnelAcl
field default value domain.com
password username test * encrypted privilege 0
username test attributes
VPN-group-policy VPNv
ID password cisco * encrypted
roger password username * encrypted privilege 15
attributes global-tunnel-group DefaultRAGroup
address pool RemoteVPN
attributes global-tunnel-group DefaultWEBVPNGroup
address pool RemoteVPN
Group-LOCAL RADIUS authentication server
type tunnel-group VPNv remote access
attributes global-tunnel-group VPNv
address pool RemoteVPN
Group-LOCAL RADIUS authentication server
Group Policy - by default-VPNv
IPSec-attributes tunnel-group VPNv
pre-shared key *.
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
management of the password password-expire-to-days 90
tunnel-group 91.X.X.57 type ipsec-l2l
IPSec-attributes tunnel-group 91.X.X.57
pre-shared key *.
!
Global class-card class
match default-inspection-traffic
class-map qnap_band
corresponds to the list of access qnap
The class-card phone
corresponds to the phone_bypass access list
!
!
Policy-map global_policy
Global category
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Policy-map qnap_access
class qnap_band
512000 64000 police entry
512000 64000 release of police
phone class
set the advanced options of the tcp-State-bypass connection
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect the pptp
inspect the rtsp
inspect the sip
inspect the skinny
Policy-map phone_bypass_policy
phone class
set the advanced options of the tcp-State-bypass connection
!
service-policy-international policy global
service-policy qnap_access to the inside interface
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Thanks in advance for any help.
Wojciech salvation,
Based on this info, I think that you can run in CSCtb53186, this bug has affected many versions before 8.3 and when fixed DEVs they were always be some details in waiting, and they created CSCtd36473 to these outstanding issues. CSCtd36473 is fixed on 8.3.1.1 intermediate version however is not fixed on 8.3.1 so I suggest you spend at least 8.3.2
Read this:
Interface: outside
Tag crypto map: outside_map, seq num: 1, local addr: 79.X.X.2list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
local ident (addr, mask, prot, port): (192.168.10.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.11.0/255.255.255.0/0/0)
current_peer: 91.Y.Y.57#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 502, #pkts decrypt: 502, #pkts check: 502
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0outgoing esp sas:
SPI: 0xDE50E6EA (3729843946)
transform: aes-256-esp esp-md5-hmac no compression
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 425984, crypto-card: outside_map
calendar of his: service life remaining (KB/s) key: (4374000/28234)
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
VPN CTX = 0x015F913C
By peer IP = 192.168.11.0
Pointer = 0xD98CACD0
State = upwards
Flags = BA + ESP
ITS = 0X019235E7
SPI = 0xDE50E6EA
Group = 0
Pkts = 0
Pkts bad = 0
Incorrect SPI = 0
Parody = 0
Bad crypto = 0
Redial Pkt = 0
Call redial = 0
VPN = filterhits = 0, user_data is0x15f913c, cs_id = 0xd83ad0e8, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0hits = 44437, user_data is0xce165c, cs_id = 0xd83ad0e8, reverse, flags = 0 x 0 = 0 protocol
IP/ID=192.168.10.0 SRC, mask is 255.255.255.0, port = 0
IP/ID=192.168.11.0 DST, mask is 255.255.255.0, port = 0, dscp = 0 x 0As you can see above we are a different context to encrypt the traffic (not used with the spi of the sh cry ipsec his)
If you do the same packet tracer, but this time with the details of the key words at the end probs you will get to see that we use 0xce165c.
Just looked at your configuration again and before you do the upgrade please correct this:
list of access vpn extended permit ip 192.168.10.0 255.255.255.0 192.168.11.0 255.255.255.0
extended vpn 192.168.11.0 ip access list allow 255.255.255.0 192.168.10.0 255.255.255.0
Just remove the second line:
no -access extended vpn ip 192.168.11.0 list allow 255.255.255.0 192.168.10.0 255.255.255.0
Also:
No outside_map interface card crypto outside
and then:
outside_map interface card crypto outside
See if that helps before perforrming upgrade,
Kind regards.
-
Hi guru of cisco
Help me please to configure VPN access on ASA 5505 for Cisco VPN Client. I want to let the customers gateway, but access remote 192.168.17.0/24 and 192.168.10.0/24 (connected through site-to-site) networks.
Will be much appreciated for your help.
My config:
Output from the command: 'display conf '.
!
ASA Version 8.2 (2)
!
name of host host1
domain domain name
activate the encrypted password password
encrypted passwd password
names of
!
interface Vlan1
Description INTERNET
0000.0000.0001 Mac address
nameif WAN
security-level 0
IP address a.a.a.a 255.255.255.248 watch a1.a1.a1.a1
OSPF cost 10
!
interface Vlan2
OLD-PRIVATE description
0000.0000.0102 Mac address
nameif OLD-private
security-level 100
IP 192.168.17.2 255.255.255.0 watch 192.168.17.3
OSPF cost 10
!
interface Vlan6
Description MANAGEMENT
0000.0000.0106 Mac address
nameif management
security-level 100
IP 192.168.1.2 255.255.255.0 ensures 192.168.1.3
OSPF cost 10
!
interface Vlan100
Failover LAN Interface Description
!
interface Ethernet0/0
!
interface Ethernet0/1
Shutdown
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
switchport access vlan 100
!
interface Ethernet0/6
switchport trunk allowed vlan 2.6
switchport mode trunk
!
interface Ethernet0/7
Shutdown
!
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS domain-lookup WAN
DNS server-group DefaultDNS
Server name dns.dns.dns.dns
domain domain name
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
RDP description
EQ port 3389 object
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-protocol udp
object-tcp protocol
Access extensive list ip 192.168.17.0 LAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Standard access list LAN_IP allow 192.168.17.0 255.255.255.0
WAN_access_in list of allowed ip extended access all any debug log
WAN_access_in list extended access allowed icmp a.a.a.a 255.255.255.248 192.168.10.0 255.255.255.0 inactive debug log
WAN_access_in list extended access permit tcp any object-group RDP any RDP log debugging object-group
WAN_access_in list extended access allowed icmp a.a.a.a 255.255.255.248 a.a.a.a 255.255.255.248 debug log
MANAGEMENT_access_in list of allowed ip extended access all any debug log
access-list extended OLD-PRIVATE_access_in any allowed ip no matter what debug log
access-list OLD-PRIVATE_access_in allowed extended object-group DM_INLINE_PROTOCOL_1 interface OLD-private 192.168.10.0 255.255.255.0 inactive debug log
access-list OLD-PRIVATE_access_in allowed extended object-group TCPUDP interface OLD-private no matter what inactive debug log
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.10.254 interface private OLD newspaper inactive debugging
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.17.155 interface private OLD newspaper debugging
access-list 101 extended allow host tcp 192.168.10.7 any eq 3389 debug log
Access extensive list ip 192.168.17.0 WAN_1_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
Capin list extended access permit ip host 192.18.17.155 192.168.10.7
Capin list extended access permit ip host 192.168.10.7 192.168.17.155
LAN_access_in list of allowed ip extended access all any debug log
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_nat0_outbound list of allowed ip extended access all 192.168.17.240 255.255.255.252
WAN_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.2.0 255.255.255.248
Access extensive list ip 192.168.17.0 WAN_2_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0
LAN_IP_inbound list standard access allowed 192.168.10.0 255.255.255.0
Standard access list IPSec_VPN_splitTunnelAcl allow a
access extensive list ip 192.168.17.0 vpnusers_splitTunnelAcl allow 255.255.255.0 any
sheep - in extended Access-list allow IP 192.168.17.0 255.255.255.0 192.168.2.0 255.255.255.0
vpn_ipsec_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0
pager lines 24
Enable logging
logging trap information
asdm of logging of information
Debugging trace record
MTU 1500 WAN
MTU 1500 OLD-private
MTU 1500 management
mask 192.168.1.150 - 192.168.1.199 255.255.255.0 IP local pool VPN_Admin_IP
IP local pool vpnclient 192.168.2.1 - 192.168.2.5 mask 255.255.255.0
failover
primary failover lan unit
failover lan interface failover Vlan100
15 75 holdtime interface failover pollTime
key changeover *.
failover interface ip failover 192.168.100.1 255.255.255.0 ensures 192.168.100.2
ICMP unreachable rate-limit 1 burst-size 1
ICMP permitted host b.b.b.b WAN
ICMP allow 192.168.10.0 255.255.255.0 WAN
ICMP permitted host c.c.c.c WAN
ICMP allow 192.168.17.0 255.255.255.0 WAN
ICMP deny any WAN
ICMP permitted host OLD-private b.b.b.b
ICMP allow 192.168.10.0 255.255.255.0 OLD-private
ICMP allow 192.168.17.0 255.255.255.0 OLD-private
ICMP permitted host c.c.c.c OLD-private
ICMP permitted host b.b.b.b management
ICMP permitted host 192.168.10.0 management
ICMP permitted host 192.168.17.138 management
ICMP permit 192.168.1.0 255.255.255.0 management
ICMP permitted host 192.168.1.26 management
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
Global (WAN) 1 interface
Global (OLD-private) 1 interface
Global interface (management) 1
NAT (OLD-private) 0-list of access WAN_nat0_outbound
NAT (OLD-private) 1 0.0.0.0 0.0.0.0
WAN_access_in access to the WAN interface group
Access-group interface private-OLD OLD-PRIVATE_access_in
Access-group MANAGEMENT_access_in in the management interface
Route WAN 0.0.0.0 0.0.0.0 a.a.a.185 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.1.0 255.255.255.0 WAN
http 0.0.0.0 0.0.0.0 WAN
http a.a.a.a 255.255.255.255 WAN
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto WAN_map 1 corresponds to the address WAN_1_cryptomap
card crypto WAN_map 1 set peer b.b.b.b
WAN_map 1 transform-set ESP-DES-SHA crypto card game
card crypto WAN_map WAN interface
ISAKMP crypto enable WAN
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
sha hash
Group 1
life 86400
Telnet timeout 5
SSH b.b.b.b 255.255.255.255 WAN
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd auto_config OLD-private
!a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 129.6.15.28 source WAN prefer
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec svc webvpn
internal admin group strategy
group admin policy attributes
DNS.DNS.DNS.DNS value of DNS server
Protocol-tunnel-VPN IPSec
internal vpn_ipsec group policy
attributes of the strategy of group vpn_ipsec
value 192.168.17.80 DNS server dns.dns.dns.dns
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_ipsec_splitTunnelAcl
the address value vpnclient pools
username admin password encrypted password privilege 15
n1ck encrypted password privilege 15 password username
type tunnel-group admin remote access
tunnel-group admin general attributes
address pool IPSec_VPN_pool
vpnclient address pool
LOCAL authority-server-group
strategy-group-by default admin
tunnel-group admin ipsec-attributes
pre-shared-key *.
tunnel-group b.b.b.b type ipsec-l2l
tunnel-group b.b.b.b General-attributes
strategy-group-by default admin
b.b.b.b tunnel ipsec-attributes group
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group vpn_ipsec remote access
tunnel-group vpn_ipsec General-attributes
vpnclient address pool
Group Policy - by default-vpn_ipsec
vpn_ipsec group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmpThanks a lot for the confirmation. There is some lack of configurations and also some configuration errors.
They are here:
(1) Split tunnel-access list is incorrect:
vpn_ipsec_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0
It should be allowed in your internal network. Please, add and remove the following:
standard access list vpn_ipsec_splitTunnelAcl allow 192.168.17.0 255.255.255.0
No vpn_ipsec_splitTunnelAcl of the standard access list only allowed 192.168.2.0 255.255.255.0
(2) NAT 0-list of access should also include the traffic between the local subnet to the Pool of IP VPN:
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.2.0 255.255.255.0
(3) dynamic-map has not been created and assigned to crypto card:
Crypto-map dynamic dynmap 10 game of transformation-ESP-3DES-SHA
card crypto ipsec WAN_map 65000-isakmp dynamic dynmap
(4) Finally, you have not enabled protocol IPSec in your group strategy:
attributes of the strategy of group vpn_ipsec
Protocol-tunnel-VPN IPSec
Hope that helps.
If it still does not after the changes described above, please kindly share the latest config and also the output of the following debugs when you try to connect:
debugging cry isa
debugging ipsec cry
-
Problems connecting to help connect any and the Ipsec VPN Client
I have problems connecting with the VPN client connect no matter what. I can connect with the Ipsec VPN client in Windows 7 32 bit.
Here is my latest config running.
Thank you for taking the time to read this.
passwd encrypted W/KqlBn3sSTvaD0T
no names
name 192.168.1.117 kylewooddesk kyle description
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
domain wood.local
permit same-security-traffic intra-interface
object-group service rdp tcp
access rdp Description
EQ port 3389 object
outside_access_in list extended access permit tcp any interface outside eq 3389
outside_access_in list extended access permit tcp any interface outside eq 8080
outside_access_in list extended access permit tcp any interface outside eq 3334
outside_access_in to access extended list ip 192.168.5.0 allow 255.255.255.240 192.168.1.0 255.255.255.0
woodgroup_splitTunnelAcl list standard access allowed host 192.168.1.117
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240
outside_access_in_1 list extended access permit tcp any host 192.168.1.117 eq 3389
woodgroup_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240
inside_nat0_outbound_1 to access extended list ip 192.168.5.0 allow 255.255.255.240 all
inside_test list extended access permit icmp any host 192.168.1.117
no pager
Enable logging
timestamp of the record
asdm of logging of information
Debugging trace record
Within 1500 MTU
Outside 1500 MTU
mask pool local Kyle 192.168.5.1 - 192.168.5.10 IP 255.255.255.0
IP local pool vpnpool 192.168.1.220 - 192.168.1.230
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
Global (inside) 1 interface
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound_1
NAT (inside) 1 0.0.0.0 0.0.0.0
public static interface 3389 (indoor, outdoor) 192.168.1.117 tcp 3389 netmask 255.255.255.255 dns
public static tcp (indoor, outdoor) interface 8080 192.168.1.117 8080 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 3334 192.168.1.86 3334 netmask 255.255.255.255
static (inside, upside down) 75.65.238.40 192.168.1.117 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
WebVPN
the files enable exploration
activate the entry in the file
enable http proxy
Enable URL-entry
SVC request no svc default
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.1.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3000
!
dhcpd address 192.168.1.100 - 192.168.1.130 inside
dhcpd allow inside
!
a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
internal sslwood group policy
attributes of the strategy of group sslwood
VPN-tunnel-Protocol svc webvpn
WebVPN
list of URLS no
internal group woodgroup strategy
woodgroup group policy attributes
value of server DNS 8.8.8.8 8.8.4.4
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list woodgroup_splitTunnelAcl_1
mrkylewood encrypted Q4339wmn1ourxj9X privilege 15 password username
username mrkylewood attributes
VPN-group-policy sslwood
VPN - connections 3
VPN-tunnel-Protocol svc webvpn
value of group-lock sslwood
WebVPN
SVC request no webvpn default
tunnel-group woodgroup type remote access
tunnel-group woodgroup General attributes
address pool Kyle
Group Policy - by default-woodgroup
tunnel-group woodgroup ipsec-attributes
pre-shared key *.
type tunnel-group sslwood remote access
tunnel-group sslwood General-attributes
address pool Kyle
authentication-server-group (inside) LOCAL
authentication-server-group (outside LOCAL)
Group Policy - by default-sslwood
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
type of policy-card inspect dns MY_DNS_INSPECT_MAP
parameters
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
http https://tools.cisco.com/its/service/...es/DDCEService destination address
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:6fa8db79bcf695080cbdc1159b409360
: end
asawood (config) #.
You also need to add the following:
WebVPN
tunnel-group-list activate
output
tunnel-group sslwood webvpn-attributes
activation of the Group sslwood alias
Let us know if it works.
-
Hi all
I want to make a file any cleaning on my 5505 without affecting any of its services.
could someone throw me a glance and to highlight what should be removed?
Thanks in advance!
ASA5505 # dir
Directory of disk0: /.
152 - rwx 27260928 13:53:20 November 24, 2012 asa901 - k8.bin
153 - rwx 4181246 07:32:20 5 June 2010 securedesktop - asa - 3.2.1.103 - k9.pkg
154 - rwx 398305 sslclient-victory - 1.1.0.154.pkg June 5, 2010 07:32:38
155 - rwx 17449432 13:23:38 November 24, 2012 asdm - 701.bin
156 - rwx 14240396 15:53:48 asdm - 631.bin March 11, 2010
drwx 17 4096 07:36:28 crypto_archive June 5, 2010
10 drwx 4096 Journal 22:12:48 December 4, 2010
158 - rwx 1530 04:31:54 7_2_4_0_startup_cfg.sav May 17, 2013
18 drwx 4096 22:13:20 coredumpinfo December 4, 2010
159 - rwx 4096 03:00:06 14 April 2013 ._asa901 - k8.bin
160 - rwx 4096 03:00:10 14 April 2013 ._asdm - 701.bin
drwx 161 4096 12:01:08 .fseventsd 14 April 2013
162 - rwx 4096 23:38:12 December 4, 2010. _. Trashes
drwx 163 4096 23:38:12 December 4, 2010. Trashes
drwx 164 4096 23:38:14 December 4, 2010. Spotlight-V100
165 - rwx 15943680 15:51:14 March 11, 2010 asa831 - k8.bin
166 - rwx 28119320 13:23:52 24 November 2012 asdm-demo - 701.msi
167 - rwx 4096 03:00:16 14 April 2013 ._asdm-demo - 701.msi
168 - rwx 1189 00:42:28 upgrade_startup_errors_201304140042.log 14 April 2013
169 - rwx 1189 09:36:58 upgrade_startup_errors_201304140936.log 14 April 2013
170 - rwx 1189 22:13:20 upgrade_startup_errors_201012042213.log December 4, 2010
171 - rwx 1189 04:11:30 upgrade_startup_errors_201305060411.log 6 may 2013
172 - rwx 1189 22:52:32 upgrade_startup_errors_201012042252.log December 4, 2010
173 - rwx 1189 06:41:10 upgrade_startup_errors_201305090641.log may 9, 2013
174 - rwx 1189 02:45:26 upgrade_startup_errors_201012050245.log December 5, 2010
175 - rwx 1189 06:34:08 May 10, 2013 upgrade_startup_errors_201305100634.log
176 - rwx 1189 15:19:34 upgrade_startup_errors_201012111519.log December 11, 2010
177 - rwx 1189 03:38:04 16 may 2013 upgrade_startup_errors_201305160338.log
178 - rwx 1189 17:04:14 upgrade_startup_errors_201012121704.log December 12, 2010
179 - rwx 1189 04:31:58 upgrade_startup_errors_201305170431.log may 17, 2013
180 - rwx 1189 21:44:30 upgrade_startup_errors_201101252144.log January 25, 2011
181 - rwx 100 05:50:40 upgrade_startup_errors_201306300550.log 30 June 2013
182 - rwx 200 06:20:12 upgrade_startup_errors_201306300620.log June 30, 2013
183 - rwx 14524416 05:50:46 July 27, 2013 asa802 - k8.bin
184 - rwx 2142 05:23:44 8_0_2_0_startup_cfg.sav 25 October 2013
185 - rwx 1138 03:33:20 upgrade_startup_errors_201308290333.log August 29, 2013
186 - rwx 1138 05:23:48 upgrade_startup_errors_201310250523.log October 25, 2013
total 127111168 bytes (2596864 bytes free)
first check what ASA version you are running (see version). If you run the 9.1 version then you can remove
183 - rwx 14524416 05:50:46 July 27, 2013 asa802 - k8.bin
165 - rwx 15943680 15:51:14 March 11, 2010 asa831 - k8.bin
check what ASDM version you are running (version show and show run asdm). If you are running version 7.1 so you can remove
56 - rwx 14240396 15:53:48 asdm - 631.bin March 11, 2010
You have two 7.1 pictures and a few demo also. Demos, you should be able to withdraw without a problem, but you must identify what VersionYesYou ASDM are running before you remove the extra 7.1
166 - rwx 28119320 13:23:52 24 November 2012 asdm-demo - 701.msi
167 - rwx 4096 03:00:16 14 April 2013 ._asdm-demo - 701.msi
160 - rwx 4096 03:00:10 14 April 2013 ._asdm - 701.bin
155 - rwx 17449432 13:23:38 November 24, 2012 asdm - 701.bin
You should be able to remove any of the upgrade starts the error logs... unless you need it for future documentation.
-
Hello
I'm trying to access my ASA of the ASDM without success.
I want to enable to access from192.168.97.0 network
I join my config file
Thanks a lot for help
Hi sylvain.rose,
Try running this command:
No asdm image disk0:/asdm.bin---> you are right I do not know where it comes from.
ASDM image disk0: / asdm - 715.bin
Hope this info helps!
Note If you help!
-JP-
-
How to change the ASA and ASDM on ASA5505 questioned once
Can anyone suggest the way to upgrade the software on the Cisco ASA5505 simultaneously both ASA and ASDM without trouble, like I just did?
Here is what happened. I copied the files asa821 - k8.bin and asdm - 621.bin for flash memory, then renamed the old versions like Oasa724 - k8.bin and Oasdm - 524.bin and then issued the command reload from the GUI of Windows.
Big mistake, I lost connectivity ASDM entirely and has been obliged to buy a USB to serial port adapter and plug the cable from port of CLI command so she can return to the unit. I found that he was running the kernel asa821 - k8.bin, as expected, but apparently the ASDM was still under the version 5.24.
Should I have created a new folder and moved the older versions of this file, then issued the command reload system and hope for the best?
I feel that I've defiled things upwards, I guess I have to use tftp to reload the boot image to get the ASA5505 back up again (using the ROMMON commands)
In fact, the only way that I was able to recover the GUI of Windows used start to asa724 image - k8.bin older command.
What is the right way to upgrade to new versions asa 8.2 (1) and asdm 6.2 (1)?
Really, I don't want to risk losing my ability to speak with this box and I spent an anxious afternoon yesterday, when I got to the pop-up message box "can not display the asdm manager."
======
After working with the CLI port, I noticed the following error:
Set of images of Manager devices, but unable to find disk0: / asdm - 524.bin
Out of config line 75, "asdm image disk0: / asdm-5...» »So apparently some configuration file must point to the correct asdm and just blindly change the files in the folder will NOT work.
========
After working more with the port of the CLI and the GUI of Windows port, I found that the 'asdm image' command did NOT work in the CLI software, but was apparently working in the GUI software, so I ran this command to tell the system to use the recent 6.21 on start.
After that and issuing the command reload of the CLI, I was able to set up successfully with the latest software of asa and asdm.
I would like to have access to CLI is valuable in this case.
I DON'T know why the command 'asdm image' appears inaccessible on the CLI port.
Any ideas?
As far as I'm concerned this problem has been resolved (using educated error)
The boot of the ASA when he tries to use the command 'system startup' file in the config. If it is not very well this file (it was not there because you renamed it), it starts the first image he will find...
However for ASDM ASA uses just the image you have. You were pointing to asdm5.2 and renamed, there was no valied ASDM image to use.
In other words you must have just changed the 'asdm image"and"system start"commands in the config and point to new files, save the configuration and restart and then it would have worked fine.
I hope it helps.
PK
-
ASDM 6.4; ASA 5510 version 8.4 (1) - cannot access ASDM
Hello Experts,
I want access to ASDM since my PC of management. I can ping to MANAGEMENT PC as well as do SSH connection but I can't go ASDM browser.
Please guide me.
Here are the usful details:
Running configuration
See the ciscoasa # running: Saved:ASA Version 8.4 (1)!ciscoasa hostnameactivate 9jNfZuG3TC5tCVH0 encrypted password2KFQnbNIdI.2KYOU encrypted passwdnames of!interface Ethernet0/0nameif insidesecurity-level 90IP 192.168.1.1 255.255.255.0!interface Ethernet0/1ShutdownNo nameifno level of securityno ip address!interface Ethernet0/2ShutdownNo nameifno level of securityno ip address!interface Ethernet0/3ShutdownNo nameifno level of securityno ip address!interface Management0/0ShutdownNo nameifno level of securityno ip address!passive FTP modepager lines 24MTU 1500 insideICMP unreachable rate-limit 1 burst-size 1ASDM image disk0: / asdm - 641.bindon't allow no asdm historyARP timeout 14400Timeout xlate 03:00Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00dynamic-access-policy-registration DfltAccessPolicythe ssh LOCAL console AAA authenticationEnable http serverhttp 192.168.1.5 255.255.255.255 insideNo snmp server locationNo snmp Server contactServer enable SNMP traps snmp authentication linkup, linkdown warmstart of cold startTelnet timeout 5SSH 192.168.1.0 255.255.255.0 insideSSH timeout 5Console timeout 0a basic threat threat detectionStatistics-list of access threat detectionno statistical threat detection tcp-interceptionWebVPNusername admin privilege 15 encrypted password e1z89R3cZe9Kt6Ib!class-map inspection_defaultmatch default-inspection-traffic!!type of policy-card inspect dns preset_dns_mapparametersmaximum message length automatic of customermessage-length maximum 512Policy-map global_policyclass inspection_defaultinspect the preset_dns_map dnsinspect the ftpinspect h323 h225inspect the h323 rasReview the ip optionsinspect the netbiosinspect the rshinspect the rtspinspect the skinnyinspect esmtpinspect sqlnetinspect sunrpcinspect the tftpinspect the sipinspect xdmcp!global service-policy global_policycontext of prompt hostnamecall-homeProfile of CiscoTAC-1no active accounthttp https://tools.cisco.com/its/service/oddce/services/DDCEService destination addressemail address of destination [email protected] / * /destination-mode http transportSubscribe to alert-group diagnosisSubscribe to alert-group environmentSubscribe to alert-group monthly periodic inventorymonthly periodicals to subscribe to alert-group configurationdaily periodic subscribe to alert-group telemetryCryptochecksum:afe73d128f7510e1bf9463fd698fa7fb: endSuccessful PING Bothwaysciscoasa (config) # ping 192.168.1.1Type to abort escape sequence.Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:!!!!!Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 msciscoasa (config) # ping 192.168.1.5Type to abort escape sequence.Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:!!!!!Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 msoutput ciscoasa (config) #.Thank you :-)
Please let us know the output of:
view worm | I have 3DES
Show ssl
The bits of this production key would ensure that your license 3DES / AES is active and your ASA supports strong cryptographic algorithms (encryption).
-
Transfer the image to the ASDM ASA on the anyconnect VPN
I'm relatively new to the ASA firewalls. My previous experience of firewall is a firewall provider. I work with an ASA 5515 - X running ASA 915 and ASDM 713. I connect Windows 8 and therefore improve the ASDM to 731. I've done it before no problem. My problem with this particular update is that I really need to download the image to a VPN connection. I can't configure a NAT device on my end to allow the ASA to connect to my public IP address - so I can connect to the ASA via anyconnect. I can't SSH in public IP address of the ASA (for now) but I can't transfer the asdm image obviously not my public IP b/c I have no NAT on my end. So I connect my PC to the anyconnect service and get an IP VPN. I need to run the command:
copy ftp://user: [email protected] / * *//asdm-731.bin disk0:
I get the following output: for access to the ftp://user: [email protected] / * *//asdm-731.bin...
Error opening % ftp://user: [email protected] / * *//asdm-731.bin (Permission denied)Anyone know good ways to solve this CLI only?
Thanks for your help.
Zach
Looks like a FTP permission problem. The user has read access? Also, make sure that your 8 victory is tuned for FTP requests on map virtual VPN.
one of the other option is to use a host of jump in your lan behind asa and open the asdm from there, using asdm, it will be easier to copy the file to asa flash.
-
Hi all
I'm trying to fix Ganymede + on one of our 5550's asa. Now, Ganymede works via ssh, but not through asdm. However, I can use asdm via the local login. Here are a few configs that seem relevant:
Bugsunny # sh run http
Enable http server
255.255.255.0 x.x.x.0 management http
HTTP x.x.4.224 255.255.255.224 outside
HTTP x.x.x.45 255.255.255.255 outside
HTTP x.x.x.20 255.255.255.255 outside
HTTP x.x.x.126 255.255.255.255 outside
HTTP x.x.x.96 255.255.255.224 outside
x.x.x.x 255.255.255.255 out http
bugsbunny # sh run ssh
SSH x.x.x.0 255.255.255.0 management
SSH x.x.4.224 255.255.255.224 outside
SSH x.x.x.45 255.255.255.255 outside
SSH x.x.x.20 255.255.255.255 outside
SSH x.x.x.126 255.255.255.255 outside
SSH x.x.x.96 255.255.255.224 outside
SSH x.x.x.x 255.255.255.255 outsidetimeout 30
bugsbunny # sh run asdm
ASDM image disk0: / asdm - 647.bin
enable ASDM historyIt drives me crazy...
Hello
What is your config from AAA for http authentication? Check that it is configured to use Ganymede first.
Thank you
John
-
Form improved ASDM 5.0 to 5.12, ASDM now does not work
Hello
I upgraded from ASDM ver 5.0 to 5.12 and now cannot connect through the client (error message incorrect worm) or via HTTPS only needed to upgrade the PIX at the same time?
Verify that the version of your config runnning ASDM new version...... It must be said
ASDM image disk0: / asdm - XXX.bin
If it does not then you neeed to specify manually
First, check the file loaded in Flash ASDM is specified by the asdm image flash: / / order. Then, verify that the enable http server command is in the configuration. Finally, check the host trying to load the ASDM is permitted through the http command.
I hope that helps... Rate if he does!
Maybe you are looking for
-
Hey guys!In the last two months I constantly connected Skype. IM connected to 100% of the time, even though I'm not logged on any mobile device (I made a point of closure of session) or on any computer. Despite this I'm online 100% of the time withou
-
Bootcamp option disappeared after hard drive partitioning
Mr. lonely I followed your steps to retrieve the bootcamp startup option if by mistake I partitioned my hard drive on mac. Here are the screenshots
-
Bit Rot Protection and home folders
Rot bit of protection can be activated on the House in OS 6.4 records? Unlike shared folders, there is not a checkbox to turn on protection from decay of the ILO on the records of the House. I replaced a ReadyNAS Duo v1 with a RN312 in a RAID 1 confi
-
My son has had 3 new PC games, we bought from a retailer. Installing a white box appears "gta_sa.exe has stopped working" Windows stops now. It is said that for each game, but using the name of the other games. I tried to understand this since Chr
-
I have XP and IE8. I recently did a XP Reinstall. My story is set for 28 days, but it retains that 'today '. Also, "Delete browsing history at the exit" is NOT checked. Before, I did 'historic' resettlement has worked well. Any suggestions?