Ask administrator password to make changes, but do not connect

Similar Questions

• Windows XP does not ask for password for a secure network, wifi not connecting. Says "validating identity".

  Have tried just about everything I can think of. computer is connected to the front secure networks without problem.

  More information would be useful.  Windows XP did not support thereafter until SP3 WPA2 wireless encryption, so if you have not installed SP3 and try to authenticate on a network protected by WPA2, it may not work.

  Assuming that you do not have SP3 installed, try to go into your wireless network configuration / configuration screen.  (There are several different configurations of wireless, including ZeroConfig, but we do not know that you are using).  All most of them save previous in a 'profile' wireless connections so that when he meets this wireless again, he knows how to configure itself.  Find the section of your configuration screen profile, look for the SSID of the router you are trying to connect, and if you see it, then delete that profile.  This will allow your machine to then reconnect to the router wireless with an open mind.

  HTH,
  JW

• Whenever I get on Firefox it ask if Firefox can make changes to my computer, why?

  Whenever I get on Firefox it ask if Firefox can make changes to my computer, but when I reset Firefox and make sure I have the latest version of Firefox as recommended, it still does it every time, why? And how to fix it?

  Hello jandamass, remember that Firefox is not set to run as administrator. Shortcut of Firefox right click > properties > deselect all items in the Compatibility tab.

  "Run this program in compatibility mode for:" keep it unchecked

  check the firefox.exe program in folder C:\Program Files\Mozilla Firefox\ Firefox

  Thank you

• My windows administrator password has been changed. How to reset the password?

  My windows administrator password has been changed. How to reset the password?

  Here you go:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before someone changed your password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  Original title: ipod

  You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

  See also - http://support.apple.com/kb/TS1363

  It will be useful.

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• A click on the shortcut to Chrome, was directed to a different Web site. Went to the McCaffee help, now headed to Google, but could not connect.

  A click on the shortcut to Chrome, was directed to a different Web site.  Went to the McCaffee help, now headed to Google, but could not connect. Not a techie, advice? On a laptop with a Router 2 son. Thank you

  original title: unable to connect to Google Chrome

  Hello

  
  What operating system is installed on the computer?
  
  You can contact the support of Google Chrome for better assistance.
  http://support.Google.com/chrome/?hl=en
  
  Hope this information helps.

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

• created an ESX VM 5.0 in vcenter 4.1, but could not connect

  Hi all

  I've created an ESX VM 5.0 in vcenter 4.1, but could not connect to it. However, the ESX 5.0 installation was successful. able to ping the IP of ESX 5.0, all the basic configurations are performed.

  1.i vclient to connect ESX 5.0 but could not do so.

  2.i even tried to add this server to the existing vcenter but couldnot do so.

  Any help?

  Welcome.

  You try add ESX5.0 in vcenter 4.X?

  If is, vcenter 4.x do not ESX5.

  to access esx5 with direct VI, you need customer VI of ESX5. You can download to access the https://yourESX5.com

  http://PartnerWeb.VMware.com/comp_guide/SIM/interop_matrix.php

  	Platform	VMware ESXi 5.0	VMware ESX/ESXi 4.1 U1	VMware ESX/ESXi 4.1	VMware ESX/ESXi 4.0 U3	VMware ESX/ESXi 4.0 U2	VMware ESX/ESXi 4.0 U1	VMware ESX/ESXi 4.0	VMware ESX/ESXi 3.5 U5	VMware ESX/ESXi 3.0.3 U1
  	VMware vCenter Server 5.0
  	VMware vCenter Server 4.1 U1
  	VMware vCenter Server 4.1
  	VMware vCenter Server 4.0 U3
  	VMware vCenter Server 4.0 U2
  	VMware vCenter Server 4.0 U1
  	VMware vCenter Server 4.0
  	VMware vCenter Server 2.5 U6

  Please, do not forget the points of call of the "useful" or "correct" answers     Mauro Bonder - moderator

• The administrator password can be changed or bypass the administrator password?

  My girlfriend and I bought her sisters Dell PC, Windows Vista / Home Premium (2005) w/Microsoft (R) Windows (R) Build 6002: Service Pack: 2 we had our IP installed but I can not read because it keeps going to dial up instead of cable modum and I can't seem to a track because she forgot and dose not the computer administrator password. What can I possibly due?  Is it possible to change or bypass the administrator password?

  Hello

  With a second hand computer, you are better to reinstall the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Dell is press F8 at startup.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• DV7: computer laptop dv7 ask administrator password

  Cannot find the administrator password.

  If you referring to the windows password, visit the site below & make a boot cd or usb key to remove the windows password.

  http://pogostick.NET/~PNH/ntpasswd/

  If you referred it to the password to the power on (the bios password), it can be reset by entering a wrong password 3 times until you see a code of error/halt, this scribble & visit the link below to generate a password to work.

  https://DL.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html

• you try to start "adding value" to repair corrupted file "system config"; XP keeps asking "administrator password"; There is none of my knowowledge. is there a solution?

  hard drive failure continued with a new HD; correct formatting; Windows xp installed and validated; all the updates including SP3 installed.

  Restored data BU on the external drive to the newly installed HD; When you are finished, has received the error message saying that the Configuration of the Windows system file is missing or damaged. Tempted to use my XP CD to repair and everything goes well until the moment he asks an "administrator password". It is not one I know, so how do I conveyed this point? I did "enter"; beyond passwords possible etc and after 3 attempts, it forces me to do it again.

  Hello

  · What is the number and the model of the computer?

  · What stage of the repair facility is it ask the password?

  · You are the administrator of the computer?

  · What is the service pack disk that you use to fix your computer?

  Repair facility is the last option that we follow to solve the problem.
  See the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545