Aspire 5250 bios corrupted - solution

Similar Questions

• BIOS corrupted in the new motherboard for computer laptop g6-1050sv

  I have a pavilion laptop G6. Earlier I had replace the motherboard with a new one. He is working finebut now when I try to open it I got the bios corrupted message. I hit enter and after the reset, I had a black screen and the capslock key blink twice. I tried several solutions (Windows key + B before departure), but I got a black screen. Anyone know how to update the bios with USB STICK? I tried to put the files from the last root forlder of the flash bios update, but did not work. Any suggestion?

  the motherboard is a month old. The laptop is g6-1050sv

  I tried the following solution

  1. I removed the power cord

  2. I removed the laptop battery

  3 unplug the cmos battery

  4. I waited for 5 minutes.

  5. plug the power cord

  6. press the power button

  do all of the above steps I finally I saw again the message of the bios corruption.  I did not support a button any. I just waited to start loading windows. After loading, I've updated the bios to the latest version. Now the laptop works well, but I have another problem.

  When I install Intel HD drivers screen fill in with points of light. If remove drivers and load the default windows drivers everything works fine. Any suggestions?

  I create new threat here

• TouchSmart HP ENVY 15-j104ea N: BIOS Corruption and Windows Logo + B is DOES not

  Hi guys,.

  I recently got a BIOS corruption this morning based on the indications of 2 key CAPS LOCK flashes. This happened after an accident caused by an UPDATE and a QR code on the page.

  I tried to use the resolution by pressing the logo WINDOWS + B, but it does not work. Is it because of Windows 10 or?

  Kindly help me with this problem. Bravo guys.

  Bloody solved the problem. Kudos to this video. https://www.YouTube.com/watch?v=_aYhDdhcpcA

• Pavilion dv6-2115aa: Pavilion dv6-2115sa BIOS corruption failure

  My laptop does not start and flashes the caps locks and MOM sighted twice, which according to locking elsewhere on the forum, is a BIOS corruption failure. However, I can't find a BIOS version anywhere on the HP support site to re-install it, especially not for Win10. Will there be a third safe to download from?

  Too bad, found here:

  http://support.HP.com/GB-en/drivers/selfservice/HP-Pavilion-DV6-2100-entertainment-notebook-PC-series/4041735/model/4099881#Z7_3054ICK0K8UDA0AQC11TA930O2

  Obviously couldn't he see that I was on my phone and the page has not updated correctly

• Why is it not Aspire 5250 or 5749 on Windows 10 list?

  I managed to install Windows 10 on my Aspire 5250 and Aspire 5749 notebook series. But it is not supported as a device Windows 10 who qualify for the free upgrade.

  I also have my upgraded to Windows 10 XC603G Aspire desktop PC, and it is supported on the Acer website for the free update.

  Anyone know why sucks it 5250 and Aspire 5749 are not included in Windows 10 support on the Acer website?

  If windows 10 does not give you any problem, just stay with your versions of drivers; If you prefer to have everything updated, the only way is to search on manufacter (relatek, Intel, AMD, nvidia... etc) site on updates of drivers.

• Acer aspire 5750g BIOS update

  Hello
  I'm using acer aspire 5750g bios version (windows 7 x 64) machine: 1.10
  and I need to upgrade to the latest version (1.21) because I am facing some problems when I updated to windows 8 that will be fixed when I update the bios
  But it's still new and I'm afraid that the update will fail, so I need help!
  I need instructions to update the bios? wihtout bricking of my laptop? can I recover the bios failure?
  Help please! Thank you

  Hello the_one,.

• Aspire 5250 - maximum amount of RAM?

  I have an Aspire 5250-0650 to be exact, with the following characteristics:

  AMD processor Dual-Core E450

  AMD Radeon HD 6320

  4 GB RAM DDR3

  How can I determine the maximum amount of RAM that I can install? Also what speed? I would switch to 8 GB if it is possible and I am aware that it would use RAM SODIMM.

  Thanks for all the tips.

  This model has 2 sockets DIMM supporting 4 GB memory per socket. The maximum size of memory supported by this model is 8 GB, it supports speed DIMM 800 / 1066 Mhz SDRAM DIMM voltage of + 1, 5V and package DIMM 204 PINS DDRIII SO-DIMM.

• Aspire 5250 - Windows 10 drivers?

  I have an Aspire 5250 that I purchsed with Windows 7 Home x 64 pre-installed. My system is qualified for the free update of Windows 10 and I installed Windows 10 yesterday. Now my system is Windows 10, I want to do a clean install of Windows 10 (I prefer a clean on an upgrade install, especially as it was always the original installation of up to 4 years).

  When I go to the Aspire 5250 downloads page, I see that there is no option for Windows 10 drivers, only Windows 7 and 8. Then, I noticed an another help page that lists all the Acer systems that will receive assistance Windows 10 (such as drivers and utilities) and the 5250 Aspire wasn't on this list.

  When I make my own installation, just use the drivers Windows 8?

  Thanks for all the tips.

  There is no driver for Win 10 Acer support, be patient, in the meantime we need to use Win8 or 8.1 drivers.

• Pavilion dv5-2035dx: error code BIOS corruption of HP Pavilion dv5 [DEAD VIDEO CARD]

  Product: Pavilion dv5-2035dx

  OS: Dual boot Linux Mint 16 and Windows 7 64-bit (no HP recovery partition) edition

  HP recovery discs: I have them, but cannot use them because the DVD laser does not (CD only)

  Symptoms:

  • While in the normal conditions of use, screen has suddenly had vertical lines black and gray
  • After reboot, the computer lights up and the fan works, but the screen is black
  • CTRL key flashes white light: 2 flashes, pause and repeat (BIOS corruption)

  Hello, I'm recovering from the corruption of BIOS, hoping that it is not a failed mobo.

  I downloaded the latest BIOS update for my system, but I can't this file to install on an external USB key using HP instructions to restore the BIOS.

  To 1.11 step, I don't get the "HP system BIOS Update Utility" screen. Instead, I get this:

  

  My questions:

  1. is there an easy way to get this .exe on a USB? (I tried 3 computers and 3 cards USB, WTH then?)

  2. If not, can I just unzip and create a bootable USB in another program by copy/pasting the BIOS file?

  3. is there anything else I should try before flashing the BIOS?

  Thanks in advance for your help. ^^

  UPDATE: the "BIOS error" was in fact the video card that failed due to repeated overheating. The repair shop, replace the video card and repaired the overheating problem (I don't ask how), and my computer is like new.

  For those who have a similar with their computer, my error "BIOS" problem (as it is coded by flashing lights of my computer) turns out to be a video card has failed.

  The repair shop, said that what happens when computers overheat frequently, which mine did. Thus, they have changed the video card and solved the overheating problem, and my computer is in working condition.

• Is there a method for re-flashing a BIOS corrupted for Acer Aspire One D260 (D260-2Dwk)?

  My what Acer one D260 does not start in Windows, I get only a black screen when activated. I downloaded the BIOS support web page, but I can't flash as the computer shows nothing, I can't get into BIOS or Windows.

  So, I would like to know there is a way to Flash the BIOS again in these circumstances (as I found for Acer Aspire A110 or A150, but the method found in this forum does not work with the Acer Aspire One D260.

  If the system does not start, we do not have a method available for the users final Flash the BIOS.

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• Satellite A200 - 1 CG PSAE3E: BIOS corrupted - solved with the crisis recovery disk

  Hi all

  I would like to report on the success of the recovery of corrupted bios on my Satellite A200 - 1 CG (PSAE3E).
  Like many others I downloaded a latest bios update for my laptop and it started under Windows 7 64-bit.

  In fact I only needs of some practical information from the bios update tool, but the update started automatically
  without a question. :( After several blocks has been updated the progress bar stuck a heterocycle.
  In 2 minutes, I got only the system completely frozen. I turned off the system manually, it works again, and...
  my laptop was completely dead: screen etc black and of course, I wasn't able to boot in Windows 7.

  So for those who only plans to update the bios: DO NOT update the BIOS ON the SATELLITE UNDER WINDOWS! THE UPDATE MAY BE STUCK!

  I searched on the web has found a solution. With a specially created disk and external usb floppy drive, the problem can be solved then

  I tried the recovery procedure described here, but it did not help. Earlier versions of tool phlash16.exe
  where it is not able to restore the bios. I heard that the disk was read constantly for about 2 minutes. After the recommended 5 min break, I changed the power of and then turned back on it and... I had the same darkness of the screen as before :(

  The strange thing is that the latest version of the tool phlash16.exe also did not work, but it was different from the earlier version. If I used the older version of the tool, the disk has been read for about 2 min, if used the latest version of the disk was read for about 10 seconds. It was for me, as the bios was not simply read by the tool.

  So I searched and searched again. Then I found it: it takes phlash.ini to the phlash16.exe!
  I downloaded an old bios (something from 2007) for an unknown Toshiba laptop to the Toshiba site. I renamed both the archive and found a phlash.ini inside. I changed only the second line in the ini file of... = 0 to... = 1 (I guess).

  Then I formatted the diskette under dos, copied the minidos.sys he phlash16.exe (latest version), a new bios for my laptop in BIOS. WPH (I guess) and after a phlash.ini has been fixed. After that, I started the crisis recovery makeboot.exe utility (found on the site, which I mentioned earlier). After that, I have the phone in recovery mode (Fn + B) bootet and... It worked like a charm. So, the important thing was the phlash.ini!

  So for those who has the same problem with corrupt bios, I've had: it's phlash.ini and the latest version of the tool phlash16.exe.
  All other information can be retrieved on the web site, which I mentioned earlier. The described method works with the phoenix bios!

  So good Look

  Kind regards
  Igor

  Thanks for the friend information
  But to be honest, the procedure of BIOS is always a sensitive issue and I would be always careful in using such things.

  When even good to know that your device is running again!

• B50-30 Lenovo BIOS corrupted after update bios

  Well I could not enter the bios to install boot priority, tried everything I could, all, I thrust.

  And I was trying to update the bios as I thought that won't let me access it and looks like it has been corrupted.

  To get this message:

  "Default Boot Device missing or startup failed.

  Insert the recovery media and press a key

  "The Boot Manager, select choose a new boot device or to initiate a recovery media.

  But I can not find a solution how to creaqte windows 8 recovery media coz I can't access my windows 8 more.

  And I can't access bios by pressing f2 or f8 or f12 or delete!

  I found the solution here! :

  http://forums.Lenovo.com/T5/Windows-7-discussion/B50-30-problem-with-install-Windows-7/m-p/1846370/h...

  Thank you all for this amazing forum!

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• EliteBook 8540p: need help with HP Elitebopok 8540p Bios corrupted restore

  Y ' All sup

  A few months ago, I installed a bios update for my HP Elitebook 8540p.  After the update, the PC started trolling, so I tried to restart the PC.  Instead of reboting, all the lights turn on (except for the light of the HARD drive), and the CAPS lock flashes indefinitely.  I have serached tirelessly for a response to the restoration of the bios.   Tried to remove the CMOS battery, draining the power of the PC and also tried to start the update of the Bios of the page files produced here.

  But the situation is still the same

  Any help would be appreciated.

  Guess what! After all these months, I finally met an easy solution!

  1 throw Hp Elitebook 8540p

  2. call it a day

  Wonders worked for me.  Try it and let me know if it worked for everyone!

• M93P Flash BIOS failure solution

  The power failure during the BIOS flash.

  Does anyone have a solution?

  I finished the flash BIOS and all the problems including hang (model M93p-i7) has been resolved. Thank you.