M93P Flash BIOS failure solution

Similar Questions

• HP PAVILION DV9418CA: HP PAVILION DV9418CA BIOS FAILURE

  I have hp pavilion dv9418ca laptop
  I tried to update my bios or you can try to flash., bt my lappy obtained frisottés hours after somtym installing I dropped nd will remove e battery so can extinguish., happened after I tried on wat see bt, he used to JUST GOLD U CAN SAY WHITE SCREEN BLACK SCREEN startup
  I read on so many forum is not a good answer can someone help me pls., if its the bios failure so how to recover it or permanently damaged his motherboard.,?

  This might help:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/fixing-A-laptop-which-had-had-a-bad-BIOS-upgrade/m-p/225042#M1016

• HP T520 Flexible Thin Client: Flash BIOS on customer T520 light with USB

  Operating system: HP ThinPro 6-64

  BIOS: L41 v01.02

  I'm looking for a little advice on flashing the BIOS on this TC. Instructions for the softpaq say to run flash the bios-high - but it works with the option of the tool-less set in the BIOS. As it is a very early version of BIOS, this option does not exist in the configuration of the BIOS. After a reboot, the update is not applied.

  Ideally, what I want to do is to create a USB bootable for flashing the BIOS, but the part I have trouble finding the correct flashing the BIOS utility. The friend-flash indicates a corrupted BIOS file, even though I know that it is very well I used the same file on other systems.

  Could someone give me some advice please?

  Problem solved. I installed 5.0 ThinPro who had the command of flash-bios-environments relevant so I could update the BIOS.

• Satellite Pro L20 - DOS based Flash BIOS?

  Satellite Pro L20 - DOS based Flash BIOS?
  Anyone know where I can download this?

  The BIOS download page gives you only the Winflash & I need to Flash this laptop backpack... are installed Safeboot in NHS policy & I'm now stuck on the keyboard & touchpad, have you tried a USB keyboard without success.

  SafeBoot is a disk encryption package which initializes windows to start so I am unable to use Winflash.
  May need to find an operating system on a bootable CD if this based BACK Flash BIOS is not found...

  Hello

  Unfortunately the BIOS from the base of BACK is not available on the European driver Toshiba page and so you will not be able to download it.

  I m not very good if it would be possible, but perhaps a local ASP may be able to provide this version of BIOS Just contact the guy and just ask

  But in my opinion it s advisable to Flash the BIOS using a Win version because it s much safer.

  Welcome them

• How can I Flash BIOS of my laptop BACK?

  I think it's much safer flashing the BIOS of the computer in the BACK rather than Windows. Usually make a boot disk 98 on my flash drive and Flash the BIOS in this way. Normally, the flash utility is a single file that contains the BIOS file. I got the update to the BIOS of my laptop, and it retrieves the number of files. I don't know if it'll work in the BACK.

  My laptop is a Pavilion dm4-2165dx.

  You are absolutely right.

  I also think the same as you.

  Unfortunately, the flashes of BIOS for most HP notebooks to consumers including yours, should be run in Windows.

  I disassembled the files on some consumer notebook BIOS and there is no file Flash bin BACK to put on a flash drive.

  When I'm forced to use a flash based on windows, I either make sure that the antivirus program is cut, or I run the flash BIOS in windows safe mode where there is a minimum of current process.  Normally the antivirus program does not in WSM either.

• I need help flashing bios

  Hi how to upgrade flash bios? It is safe?

  I already download the lenovo driver page.

  I don't have the dvd drivers

  BTW is g460

  just download bios update file, unzip, right-click and choose "Run as Administrator" and leave the winplash updated your bios.

  you don't need usb or something else.
  (Make sure you download the file appropriate for your system - like windows 7, vista or xp 32 or 64-bit)

• You want to flash bios Presario c700. What C700 I have?

  You want to flash bios presario c700 but not available in (incomplete) list model number.

  My model is c700, but only choices are: c700CTO, c700LA, c700TCTO, c700XX. No option for C700.

  Product of my cell phone number is KC59OUA. Vista 32-bit.

  What C700 I have?

  Hello:

  Here is the link to the page support and driver for your Compaq Presario C751NR Notebook PC.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3646600&LC=en&cc=us&DLC=en&task=

  Your product number is KC59ZeroUA, not KC59LetterOUA

• The S10 - 3 l BIOS failure: any solution?

  Excuse me for my bad English (as appropriate).

  Hello!

  I've updated the BIOS from V34 to V37 and got a "piece of metal" - laptop just will not start, no MESSAGE, no Lenovo logo, etc. I know that it is the BIOS boot failure - something went wrong during the updating/flashing and I had 'bad' BIOS.

  I searched the forum/database knowledge/sites/etc and have nothing - it's No work instruction: WINCRIS-flash and similar for Phoenix BIOS solutions does not (Fn + R, Fn + F, B + Fn, Fn + ESC, Win + R, Win + F, Win + ESC...).

  Y at - it someone who has really solved this problem through recovery critical BIOS (minidos + bios.wph phlash16...)?

  Is there a solution? And, please, give no response as "contact support" or something like this - I want to try to fix the BIOS before going to the service manually: maybe someone saves time and money and can give a working solution or two...

  Technical information:

  UPD: just for my interest, I called for some hardware repair private companies / enterprises - BIOS flashing via chip universal programmer (or something like that) will cost about $ 30 and take a few hours of service.

  However, I want to bring this netbook in official service as soon as I have some time to do.

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• Satellite Pro A300 PSAGDA won't start at all after flash Bios 1.90

  I have an A300 PSAGDA-01Y00R.

  I tried to Flash the bios to version 1.90. He started the process, and when I came back an hour later the cell phone was off.

  When you turn it on, it has nothing now. I tried removing the battery and running on sector only.
  Works for keyboard (as in light) and power works, but there is absolutely no action on the screen.

  Is there anything I can try?

  Hello

  Try this;
  Remove the battery, disconnect the adapter and wait 1 hour.
  Then connect both devices and try to turn on the unit.

  If this will not help, then you will need to contact a local ASP.
  It seems that something was wrong during the BIOS update process and therefore, the laptop can not initialize correctly.

  I put t see another solution for your problem

• Error Flash BIOS dv6-1030us

  I was upgrading my firmware BIOS of F11 at latest when to halfway through I lost power to my system and the closed system. Now when I turn on the laptop I get only a series of beeps and flashing lights (shift CapsLock and numlock). It's the same thing every time. I can fix the BIOS so I put it back to HP service center?

  During BIOS update failure, if there was a power failure your laptop would turn into a brick. This problem can be fixed easily by keeping informed of what exactly past and providing your laptop to HP service center

• Flashing BIOS R830 Satellite on the Satellite R630

  I have a version of Bios R830 - 1GZ 3.70 THIS Version 1.50
  And also a R630 - 138 BIOS version 2.20 THIS Version 1.60 (this is the most up to date for this discontinued model version).

  The elders will recognize my WD Storage for what it is--it is an external HARD drive. And the boot in the bios shows below the HARD drive priority internal - that is what you expect for a correct operation.

  The last (R630) will always attempt to boot from storage of WD. It does not show the WD HARD drive in the list of Bios Boot priority.

  I can't continue to disconnect and reconnect the USB in the R630 - but it's a nuisance. I don't know that the problem down to the BIOS is not quite new. What would be the likely result of the turn signals version 3.70 - designed for the R830, on the R630?

  I expect to be told that he will make the inoperable R630. These laptops are very similar, so I hope someone might have a more promising response.

  Thanks for your help

  First of all:
  You can download only from the page driver BIOS Toshiba UE Toshiba victory.
  This means that you can update the BIOS only when running windows system.

  Second:
  It is not possible to update the BIOS R830 on the R630 since there is a protection which break the process flash because of compatibility issues.

  Thirdly:
  You could damage the laptop if you would try update BIOS wrong (perhaps using the traditional version of BIOS, USB version, etc.)
  So it is really bad, bad idea, that

• Doesn't have a flash bios on Satellite U400-14 b

  I have a U400-14 b and recently flashed my bios upgrade to win 7 from xp,
  It crashed at half way through and I had to spend its take-off and now there is no display on the screen when I turn it on, the DVD drive seems to turn but that's all...

  Am feeling really stupid and helpless and she wondered if anyone knows if there is a hot spare bios I can download or anything, at all can someone suggest short to replace the bios?

  Am much grateful if someone could shed some light on this for me.

  Thanks again.

  Hello

  This s pity but there is nothing to mate
  You need the help of the technician of the ASP.
  Only this guy could help you.

  Get in touch with ASP in your country and ask for help.
  I wish you good luck

• Equium L20 dead after flash BIOS

  I recently tried to update the BIOS on my Equium L20 (model PSL2Ze). I downloaded the latest version of the BIOS and ran the update of the bios windows that much happened and restarted the laptop and it's that it happened.

  Now, I don't even get the BIOS boot screen, indeed the screen didn't even come on when you press the power button.

  The green light as the fan that stays on the disk HARD runs briefly but other than that, nothing. I thought this would be fixable by burying a CD with the BIOS on but the instructions page to do this, it shows the extract the zip file you download in 3 folders 'Docs', 'disk 3.5' and 'CD', but the file download just extract in a folder and contains the version of windows and no records or Docs section.

  Is this an oversight, should I look elsewhere?

  Bq. {color: #333399} Option 2: update with CD-ROM-{color} \ {color: #333399} 1. Extract the zip file containing the BIOS upgrade to a temporary folder. \\ 2. Three subfolders will be generated in the temporary folder. "docs", "Update - 3.5' disc',"Update - CD - R or CD - RW"------3. How to make a bootable CD-ROM please read the *.pdf file in the "docs" folder \\ 4. Make sure that the laptop is plugged into the sector. \\ 5. Turn off the laptop. \\ 6. Place the BIOS upgrade CD-ROM in the optical disc drive. \\ 7. Turn on the laptop with the F12 key. \\ 8. The BIOS boot menu appears. Select CD/DVD or CD-ROM symbol with the arrow keys. Press "enter". \\ 9. Notepad starts from the upgrade of BIOS ROM-10. A boot menu is displayed. Select the point of updating the BIOS by using the arrow keys. Press "enter". ------11. The BIOS update process begins. Do not turn off the laptop during the update. ------12. If the update is complete, follow the instructions on the screen. {color}

  So basically I'm puzzled. I put a blank CD in the drive and turned on the laptop and it turns and tries to read so I'm confident a flash CD works but I don't know how to create the CD rom flash.

  Anyone can offer me some advice please?

  Scoopz

  It's a shame!
  But unfortunately, there is nothing to see! Seems the motherboard is dead and replacement is necessary to make it work again!

  You know that the update of the BIOS is always risky and so do not do if the laptop runs correctly.

  The replacement of the motherboard is not very easy and a little trickier. If you have no experience you shouldn't it because you risk damaging the new purchased Council where the warranty is valid!
  So be careful.

  I found this page that shows how to disassemble the Satellite L25. This laptop is very similar to the Equium L20. So maybe it s a little help.

  [How to disassemble the Satellite L25 | http://www.irisvista.com/tech/laptops/ToshibaL25/satellite_L25_laptop_overclocking_1.htm]

  But once again; everything you make are at your own risk!

• How can I make a bootable CD containing a Flash BIOS for a Satellite A40-151

  My BIOS is damaged and requires reloading, but my laptop doesn't have a floppy drive. I can't find instructions on how to create a CD to load the new BIOS on the Toshiba site accept a reference to follow the instructions in the folder of Toshiba on the laptop. This can't look like Window XP is not started due to the failure of the BIOS.

  Someone has any ideas or someone could email me the instruction please.

  Waiting in anticipation.

  Kind regards

  MikeyT.

  Hello

  Why do you think that the operating system cannot start because of the BIOS error?
  Did you get any error messages?

  Unfortunately, I found not as instructions on the creation of CD in BIOS.
  As far as I know, sometimes two options for the update of the BIOS. In windows and the update of the traditional BIOS. But you should always check that the BIOS procedure is compatible with the laptop you.
  For this, I found this useful document:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  But first, I would recommend trying to boot from the recovery CD Toshiba if the OS cannot start.
  Eventually, you n don't need to update the BIOS.

  PS: Try to enter the BIOS and try to set the default settings.