Aspire 5336-windows restore and erecovery two failing?

Similar Questions

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• I used fresh paint in Windows 8 and had two sets of brushes - wet & dry. Now, after Windows 10, I seem to only have dry. Any thoughts?

  I used fresh paint in Windows 8 and had two sets of brushes - wet & dry.  Now, after Windows 10, I seem to only have dry.  Any thoughts?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query with fresh paint.

  Try to uninstall the application and then reinstall it.

  Uninstall and reinstall the application

  I suggest that you uninstall, then reinstall the app of fresh paint. follow these steps:

  1. right-click on the new paint app and click Uninstall.

  2. open the Windows Store.

  3. for the application of the fresh paint and click on install.

  4. check if the problem persists.

  Fresh paint FAQ:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/fresh-paint-FAQ/552a7366-fbd2-4b19-a4b8-4021453a4835

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

  a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

  Hi Abhay,

  I suggest disable you the password protected sharing and check if it helps.

  Networking of computers running different versions of Windows

  Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

• Have Windows Vista and latest update fails to install and comes with the error code for unknown error

  When I try to install .net security update it keeps not I'm trunning Vista Ultimate.  All the other updates installed

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I bought web premium CS 5.5 for windows 7 and the installation fails

  Hello

  The beginning of the installation goes well, the serial number is Ok.

  First DVD OK.

  Start of the 2nd DVD and many failures occurs, she begins with:

  Exit code: 7

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DS013, DW050... WARNING: DS013, DW036...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error, error 101 (s), 98 warning (s)

  WARNING: DS013: Payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 is already installed and the load of the session {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no connection to upgrade/conflict with it.

  ERROR: DS013: check the integrity of the payload: failed with code 1

  -Payload: {D92BBB52-82FF-42ED-8A3C-4E062F944AB7} Microsoft_VC80_MFCLOC_x86 1.0.0.0.

  ERROR: Error 1935.An error occurred during the installation of Assembly component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E}. HRESULT: 0X8007007E.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: Error 1935.An error occurred during the installation of Assembly component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E}. HRESULT: 0X8007007E.

  What can I do?

  Thank you.

  MichelS

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5

• Restore and update Windows

  When you use the windows restore and restore your PC to an earlier date... Windows Update (I put to download, but let me decide what updates to install) offer again updates have been installed after the date of your restore point.  You can see these updates in Windows Hostory.

  Are these updates of window offered because they are installed is no longer even if they appear in the story and you have to click on install, or, they are still installed, even if her restoration before be offered and not deleted when restoring to an earlier date... and you select install you are simply overwrite the same update?

  The view update history list may differ from the list of installed updates. When you do a system restore in Windows 7, updates that have been kidnapped by a specific restore point still appear in the history view update but do not appear in the installed updates. It will be offered by Windows Update and then appears twice as successfully installed and show different installation dates.
  The list displayed when you click on the link to view update history in a file named DataStore.edb.
  This file can become very large, but can be removed if one chooses to do.
  My system 7 it shows currently beyond 25 MB and my XP system it shows more than 50 MB. As you have discovered, it is not always accurate as to what updates are installed.

  As an experience, that I moved to trash, did a scan for updates, and a new was created. Since no new updates have been detected, downloaded, or installed, when I clicked on the link to the history of update of view he said that updates had never been installed. The list of installed updates begged differ and showed all the updates installed.
  Then I did a system restore, a copy of DataStore.edb has been restored to its original location, but the view update history list said that no update was already installed. The installed updates list remained the same and no updates were offered as none had actually been removed.

  Clear as mud? MowGreen update safety Consumer Services

• Errors in Windows 7 with Windows Help and Support, network connection, and the system restore

  I have a HP Pavilion dv6 (4 years), sometimes overheated with heavy use. Normally I can cool, restart and wear. However, my laptop just overheated and closes, and this time I encounter all sorts of problems.
  First of all, after the reboot, I noticed that the system does not automatically connected to my Wi - Fi (it does not even recognize the available network).
  Secondly, in attempting to fix the network problem, I clicked on the link "Troubleshooting", only to receive the following error message "an unexpected error has occurred. ID of Package cannot continue the Troubleshooting Wizard": unknown path: C:\Windows\diagnostics\system\networking error Code: 0x8007045A

  Third, because troubleshooting did not work, I thought I'd try the help and Support Windows to search for answers. However, when I opened it, I received the following message: "Windows Help and support has encountered a problem. You might be able to solve the problem by restarting Windows Help and Support. If the problem persists, proceed as follows: 1. search the online help on the Windows website.  2. contact your manufacturer of computers or Microsoft Support for assistance. There could be a problem with one or more Windows system files or folders on your computer. "Because I could not connect to the internet, these suggestions and links were useless.

  Fourthly, as I failed to locate the problem, I tried a system restore. However, after he appeared to run (took about 30 min) and restarted Windows, the following message appeared: "system restore was not entirely successful. The system files and settings on your computer did not change. Details: System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus and restart System Restore. An unspecified error occurred during system restore. (0x80070005)
  You can try the system restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see what is recovery? "I have disable my antivirus (AVG), tried and received the same error message.

  Short physically all my backup files and restore to factory settings, I think I've exhausted what I can do.

  * EDIT * after scouring the site, I found a suggestion to run the tool via the command prompt System File Checker (see thread here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/no-internet-connection-on-this-computer-after/83fb22c9-712e-467d-9a68-f8d52dde9bcb), which I did and found some corrupted files. The following response appears: "Windows Resource Protection found corrupt files and repaired successfully details can be found in the CBS.log newspaper... File system changes will take effect after the next reboot. "After restarting, the internet connection problem seems to have been resolved. Service work. and Windows Help and Support also works! I hope it helps someone else!

  Hi Lorenacadi,

  Thanks for sharing of the resolution. Your efforts and patience are highly appreciated.

  In addition to the emission of heat:

  Two things inside the laptop generate heat - power (in the place where the power cord plugged in) and the processor.  The CPU has a heater and a fan to help disperse the heat and keep the CPU at a reasonable temperature.  Hot air is sent on the vents, and air at room temperature between in other events.
  What happens generally is dust forms near the vents, near the Airways within the laptop computer which lead to the mouths and on the CPU fan itself.  All these sources of dust cause airflow slow down, so that the hot air lingers and gets even hotter.  To resolve this problem, you will need to take the laptop apart and 'very good' to clean the dust and the CPU fan.

  Another potential source of heat which would be composed of dust problem might be software related.  More 'work' the CPU must do the most energy is needed and therefore more heat is released.

  Keep us in case you have questions/suggestions more associated with Windows.

• Installation of updates Windows comes to approximately 96% complete, then said: "failed to update Windows, restore configuration changes.

  I just bought an Acer Aspire 5600U all-in-one computer. When attempting to install Windows updates, sometimes about 96% complete, then said: "failed to update Windows, restore configuration changes. How to solve this problem?

  Original title: Windows updates

  Hello

  Please, try to reset components Windows Update as mentioned here and see if this helps:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  Hope this helps, good luck :)

• Why not my Acer Aspire 5336, burn cd / dvd? I tried the update and uninstall drivers! I have

  Why my acer 5336 cannot burn CDs / DVDs on secondary storage (DVD/CD), its leaves is failing or simply the empty disc after burning process took place. It's very frustrating! Help, please. I want my acer to burn CD / DVD. Properties of my acer 5336: CD-ROM/DVD-ROM (standard CD-ROM drivers).

  It may be a problem with the software that you use or the laser on the optical drive can no longer work. I recommend performing a factory restore and then try to burn files to a blank DVD-R/CD-RW. I would try to copy certain files and images just as a test.

• Virus blocks all files & folders, windows defender and restore point

  I have a virus that blocks access to my files SYSTEM, Windows Defender and perhaps even of Windows Support. For some reason when I give permission from Windows to check my system for my product key and ID it cannot access. Malware bytes and AVG nothing found. Malware, I ran in safe mode. AVG was not available in the save mode. Defender does not open. IE and Windows explore are constantly stop and error too.

  My system is Vista Home Premium, service pack 1, the last I did change is the change in language. This week, I removed a very boring task bar called Babylon, who appears out of nowhere, from my computer which also seemed like malware to me. All traces of it were gone. What to do next. I tried everything I can think of.

  Thank you.

  I suggest you to install Microsoft Security essential place of AVG:

  http://www.Microsoft.com/security_essentials/

  For its last database of configuration of installation in offline mode:

  https://www.Microsoft.com/security/portal/definitions/ADL.aspx

  Did you run the Microsoft Windows Malicious Software Removal Tool:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  In this case you could not access the page everything Microsoft domain so you need to download it from another machine.

  If nothing works then:

  It seems that malware has badly edited the system files. Fresh formatting will be the best procedure, but you can follow the instructions if you want to format it now & solve the problem by repairing OS platform below.

  1. open the command prompt (make a right click on it & "Run as Administrator").

  2. type sfc/scannow & then press ENTER.

  (the command will restore all the files system protected Windows in its original version)

  3 then he will ask the Windows startup disk, so insert & allow the time to complete the scan.

  4. once the command/scanning is finished check that your problem exists or not.

  Note: if succeeded, you may need to activate your copy of windows with its original CD key. Otherwise next reboot it will delay/deny to connect to your account until that activate you in original key. If you have no real CD key as you try the command.

  You will be unable to run this command if you have no windows startup disk. (You will need Microsoft Windows Vista SP1 not any bootable disc restore disk / retail)

  In the corruption of file extreme command may have failed. Then, to fix the OS by booting the disc.

  S.Chatterjee

• Windows 7 backup does not work after upgrade Windows 10 and Windows 7 restore

  I am on Windows 7 (Win-7) for several years and I'm quite happy for Win - 7.

  Microsoft has improved my Win 7 to Win - 10 at night. I refused the upgrade and Microsoft restored Win 7 on my computer. Win - 7 works very well except the backup.

  The backup is not one that I used previously.

  PIC - 1 appears when I backup implementation.

  PIC - 2 appears when I press Next

  PIC - 3 appears when I press Save

  How to restore the backup of Win - 7?

  PIC-1

  

  PIC-2

  

  PIC-3

  

  You have not answered my previous message.

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  Please download and share with everyone a new copy of your log applications of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the Application log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window expand Windows logs and select Application. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows backup and restore inefficiency

  I use Windows Backup and Restore to backup personal files from my desktop Win 7 to an external HD. Then, from there, I use Windows Backup and Restore to "restore" my files to backup data to a second location, my laptop.

  It works fine but there is what appears to be a huge inefficiency as part of the restoration of this process: When Restore detects a file on my laptop to a previous restoration with the same name in the form of the new backup file to restore, it offers only two options: overwrite the saved old file with the new backup file , or jump and don't write anything.

  There is no reference to a third option: overwrite old files if and only if the new files with the same name have a date-time later.

  If I do regular backups, it should expect that most of the files in the backup of the former will have not changed in the new backup. But if I choose the option to NOT overwrite the old files of the same name, old file of the same thing, but even with the new dates and times get skipped also and not are not updated. (Given that the choice of the screen jumps to for each of hundreds or thousands of files with the same name in two backups, I check the little box to make the same choice for ALL these cases, rather than manually examining each instance.)

  So if I select the option to change the value nothing, backup and restore is worthless because newly saved files with a more late date-time than in the previous backup will be not updated in the restoration. If I decide to choose to overwrite the previous version of the file was changed or not since the last 'restore' (which is what I do), then use of time and energy of the restore process is increased enormously.

  Y at - it a setting I'm missing that would restore process has replaced the files of previous restorations if and only if the new version of the files have a date-time later?

  If not, this very simple option can be added to backup windows and restore utility?

  If you want this level of options, use a third-party backup application.

  Or wait in the hope that the next version of win may have the added options

• Windows Backup and Restore does not save F: and Q:?

  Windows backup and restore settings show that it is possible to backup C: and D:, but shows no F: and q.

  You save hidden records, for example HP-Tools or any disk recovery.

  Using windows backup, there are two types of backup

  (1) data up - obviously only backup data

  (2) image, which creates a complete picture of the system, to the date the image was created. You can then restore the image if necessary

  Second

  HP would be provided either a defined recovery disk, or more generally presented guidelines on how to create the recovery disks. It is a HP process, not a victory for MS a.

  Recovery discs using HP allows you to fix either the sys or a destructive restore to factory supplied State.

  If you restore to factory of the reader state Q is created when initialize you Office Starter

  BTW save you or Image to the external media, if the drive breaks down (this isn't a head crash) everything on that drive is lost, to the end user.