Restore and update Windows

Similar Questions

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• error 53 on I phone6, I can't restore and update to ios 9.1, there by icloud, but it does not work

  I can't restore and update ios9.1 53 on iphone error 6, I try by icloud, but it does not work

  the screen on the myphone was raplaced, how can I restore phone

• I'm getting 'Failure Configuring Windows Updates, changes of restoration' by updating windows.

  It was the first time that I am trying to update my laptop of Lenovo G500s which is come with 8 windows pre installed, before installing the updates, I have restored the laptop if you default factory using Lenovo a recovery key. While the updates are being installed I received a message 'Fail configuration Windows updates reverting changes'. It lasted for an hour. When I tried to install updates again the same message appeared. My laptop came pre-installed with Nitro Pdf 8 and Mcafee Internet Security, so I have even uninstalled them, I also ran Mcafee Consumer Product Removal Tool. But the problem with windows update remained. I then ran the convenience store update Windows that sets these two problems:

  fix windows update fixed the database and repair misconfigured update windows components, but this solves nothing. Later I discovered that although the resolution of update problems show that the problems have been solved but convenience store running immediately shows again the same problems.

  So this time I ran again the recovery system, and immediately after the system recovery windows update of convenience store that showed the problems mentioned above two updates of windows.

  Is it so that means the recovery partition itself contains other problems that my problem would have been solved, what do I do to fix this?

  Take a look on: http://support.microsoft.com/kb/947821/en-us

  ... use the Deployment Image Servicing and Management (DISM) Inbox. Then, install the update or Windows service pack again...

• BSOD in Windows 7 since the addition of Office 07 and updates Windows.

  How can I keep my computer from HP 1 month (Windows 7 Home Premium 64-bit) to close down and blue-screening at random times?  First thing I did when I got it was to slowly add programs I used on XP safely in the past.  I run Comcast w/McAfee and virus scan came negative.  However, just recently, I added Microsoft Office 2007 Ultimate Steal and updates the Microsoft appearing to all appropriate... I think that's when the trouble started.  Since then, I had random and/or closures crashes.  All the expert advice would be appreciated.  Thank you!!!

  Here's a common reason is given:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80036FA470
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\123109-17035-01.dmp
  C:\Users\Paul & Laura\AppData\Local\Temp\WER-34491-0.sysdata.xml

  Bug Check 0x1A: MEMORY_MANAGEMENT
  A value of 0x0000001A MEMORY_MANAGEMENT bug control a. This indicates that an error occurred serious memory management.
  [Source: http://msdn.microsoft.com/en-gb/library/ms793604.aspx]

  This management mistake of memory is usually hardware related...
  [Source: http://aumha.org/a/stop.htm]

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.
  [Source: http://msdn.microsoft.com/en-gb/library/ms793437.aspx]

  The requested data were not in memory. An address of invalid system memory was referenced. Defective memory (including main memory, L2 RAM, RAM video cache memory) or incompatible software (including remote control and antivirus software) [emphasis] may cause this stop message, as may other hardware issues (for example, incorrect SCSI termination or imperfect PCI card).
  [Source: http://aumha.org/a/stop.htm]

  I don't think that the problem has nothing to do with after installing Office Ultimate 2007.

   

  -Online if the computer came with a free trial preinstalled, Norton STOP HERE! and reply to this message.

  ===============

  It is possible that the application of McAfee is originally these STOP errors. Discover:

  1. download the Setup program for Microsoft Security Essentials * (MSE), save the download to your desktop: http://www.microsoft.com/security_essentials/default.aspx

  2 close all applications (anything with an icon on the taskbar) open and repeat steps #1 and #2 (only) of the solution triple McAfee & reboot.

   

  3. IMMEDIATELY to make sure that the Windows Firewall is on 100%!

  4. close all applications (anything with an icon on the taskbar) open then right click on the file that you saved in step #1 above and select run as administrator to install MSE; Follow all the instructions.

  5. after the restart, manually & repeatedly updated MSE until you get one invite 'no more updates'.

  6 test cycle.

  If the behavior persists, contact HP Support as soon as POSSIBLE under your warranty or Service contract.

  ------------------------------------

  
  * I'm only using MSE as a Guinea pig here. You don't necessarily have to leave installed when we're done with our troubleshoointing but I wouldn't reinstall McAfee freebie just yet IIWY or if install any application of Norton.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Attempt to install custom software and update Windows install.

  original title: windows installer install problem 3.1

  I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. Can anyone help.

  Installation with Windows Vista version is:
  Windows install 4.0
  Version - 4.0.6000.16386
  Released with Windows Vista

  Windows Installer 3.0 is released with Windows XP SP2. It was released as a redistributable.

  You can download Windows Installer 3.0 Redistributable from the Microsoft downloads site, but it has not been created to run on Windows Vista. It will probably give an error message that you have a newer version installed.  You may need to change the program to look for a different version of Windows Installer.

  You may be able to install the software in Compatibility Mode.
  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps.

  Marilyn

• I can create a system recovery disk that gets installed and updated Windows 7, not the preinstalled HP Vista recovery Partition?

  I have a laptop HP HDX 18 that had 64-bit Windows Vista installed, with a Vista recovery on his C drive Partition.  Since then, I installed clean 64-bit Windows 7 Professional of his Microsoft licensed DVD, that I still have.  I kept with all (200 +) of Windows updates.

  Now, I want to create a system (Flash drive) for this laptop recovery disk, but my concern is that he will lead the recovery in its Partition Vista original, installed at the factory.   If I use W7 administration tools installed to create a system recovery disc, it will recover the old Windows Vista or Windows 7?  In addition, it would be nice to have a system recovery disk that had the latest W7.

  I'm not looking to install the drive link below; However, I prefer the system recovery disk to restore my laptop to its W7 system most recently updated, rather than start over.

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  What choices do I have?  Where can I find the appropriate instructions?

  Thank you very much for your help!

  If you are the same person, you use 2 different profiles, not the same profile.

  Sunspirit and jhughey are 2 different profiles.

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• HOW DO I ACTIVATE AND UPDATE WINDOWS

  I recently bought a lenovo g400 laptop which came with window 8 pro build 9200 pre-installed. I noticed it always displays activate windows, I clicked on settings of your laptop, but there is no option to activate windows. How can I activate my windows 8?

  Also I could not updated for windows windows 8.1 store with the answer that my system is running a version company license or volume window 8. What can I do?

  Contact Lenovo.  They are your first line of support.  You haven't bought Windows 8/8.1 - you bought a computer with a preinstalled license of Windows 8/8.1.  The support comes from the OEM - if they support - return it and get a system from an OEM manufacturer that supports the product they are supposed to.

  This can help:

  How to activate Windows 8 and 8.1 telephone
    http://www.eightforums.com/tutorials/24636-activate-Windows-8-phone.html

  But honestly - the truth is that if you have purchased the system with Windows 8 pre - install NEW (not used) - your support comes from Lenovo for such things.

• ESX3.5 restore and update "dish"

  Hello friends
  I have 5 servers and cluster HA ESX3.5 U5 and HP storage VMotion for the 8 data store. They were created delta VM files and the 'flat' file apparently was 2 datastore... restart the virtual machine does not start and the error did not find the file... I did copy the entire VM folder by 3 move the data store 'flat' file for the data store 3, removing the deltas in 3 data store, but the equipment is obsolete initialize in time... The Delta of the original I have against them, but how or what can I do for Delta updated on computer data and virtual. Thank you.
  concerning
  Carlos R.

  I did not use VCB for years, so I can't say for sure, but I do not remember that it creates another .vmx file.

  André

• iPhone 4 will not restore or update

  Hello

  I just pulled out my old iPhone 4 that I haven't used for probably a year and a half. My iPhone 5 c died on me randomly and I set up an appointment to get it fixed, but until now, I need to access some applications I can download on my 4.

  Surprisingly, the battery is still able to be charged and the phone finally woke up from his sleep. Then I tried to connect to my WiFi, but none of the wi - fi access points appeared in the list, and the upper left corner of my screen went on to say "search". I tried to restart the phone, which has proved to be a heck of a lot of trouble because it would show the logo of apple on the screen for so long each time. I finally went to bed and tried to sleep, but of course to get up to ten minutes later and the phone was finally facing upwards. Same problem of wi - fi. So I thought I would try to update.

  It comes as I had before he told me "this phone could not be updated." and then asked me if I wanted to try the update again, or to restore and update, I tried the update again, just in case. That did not work. So I tried to restore twice (and to update because apparently that was required to restore) and he said "this phone could not be restored." According to me, it gave me an error number (16) and iirc the update error was (17).

  Can someone please?

  During my minutes awake eagerly hoping that it works, I realized I should probably keep my 4, loaded and ready just in case my 5 c dies never again, because my Apple Care runs in June and I will probably not be able to pay a 6 until the 7 came out. Maybe even the 8.

  If I am able to solve this problem and wi - fi still does not work, I'll probably put it in the fridge (that my Iphone 4 32 GB Black can't find any wifi network) because obviously my phone has been reset a dozen times now and my wi - fi works with everything else is probably not the modem.

  I found the answer here: cannot restore my Iphone 4 after an update, Please HELP!

  "I was able to fix this by simply changing the usb ports..."

  Has worked for me, my phone has restored himself. Now is the time to try the hack of refrigerator.

  Edit: so bad, I just went more near my modem (right next to her instead of the room above) and he acknowledged the connection. Hooray!

• HP Envy 5660: Failed to update Windows 10 thanks HP Envy 5660

  After the installation of the printer HP ENVY 5660 updates always display the error "• Hewlett-Packard - Company WSD multifunction printer, MFP, other materials - Null Print - 5660 HP ENVY series - error 0x800f020b". Even after the withdrawal of the unit and uninsatalling this error repeatedly, and update windows 10 is not coming. How to remove this error and how to install the printer without this problem?

  Hi @tstyam,

  Thank you for showing your interest in the HP Forums!

  I understand that you are experiencing this error "Hewlett-Packard - Company WSD multifunction printer, MFP, other materials - Null Print - 5660 HP ENVY series - error 0x800f020b". I'd be happy to help you with this.

  It seems that there is a driver on the computer. If you have just installed Windows or a device and the Device Manager has 'Unknown devices' or 'other devices '. This means that they are in a State of error or without no driver installed.

  To resolve this issue, remove the "unknown device" or "Other devices" and run Windows Update to fix the problem.

  1. Go to settings, then select devices.
  2. Click on connected devices.
  3. Click on Device Manager.
  4. Open Printers and then uninstall/remove/delete the "unknown device".
  5. Open the devices and then uninstall/remove/delete the "unknown device".
  6. Launch Windows Update to correct the problem.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Satellite C855 - update Windows AMD 7610 GPU causes restart and restore

  On a TOSHIBA Satellite C855 with graphics AMD Radeon HD M 7610, I'm getting repeat ' Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.3 - AMD Radeon HD 7500/7600 Series "update problems when installing the Windows 8.1 (64-bit).

  During the installation of the update, restart the laptop and only a restore option is available.
  Every time this update causes a reboot and restore.
  A very miserable situation.

  Toshiba knows why in this case, what is the solution?
  Update Microsoft recommends this update for users of Toshiba.

  Toshiba has official advice on satellite users should apply Windows updates like these?
  This problem has been ongoing since late December;
  [http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/problem-with-graphics-driver-update/a7a6da38-6575-405b-86c2-71a620be06b7]

  Kind regards.

  Before you begin to discuss your problem, I would like to know if you have updated Windows by following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/?
  You will find detailed instructions for the Win8.1 update.

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 32-bit Vista, System Restore and windows update are suspended.

  This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.

  What can I do?

  I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.

  can anyone help please?

  Thank you very much.

  Hello

  You should go to the system manufacturer's website and get the latest network drivers wifi and card.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.

  Maybe the other pilots. software and updates to the BIOS, you can get there.

  Control Panel - Device Manager - double-click on a device and check the version.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  then also make - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  Rob - bicycle - Mark Twain said it is good.