Aspire 5553G ati driver

updated my Aspire 5553 G win 8. problems with the ATI catalyst driver. any driver update available?

ATI Mobility Radeon HD 5000 WDDM v1.20

This device cannot start (code 10)

According to me, that it is a big problem for users who updated to OS to win 8. I spent a lot of time to solve this problem. The switchable graphics driver is not the only problem you will find after the Win8 update. You may have problems with drivers ethernet which looks OK in Device Manager, but the network traffic, you will also have very low speed 1 Mbps autour. Here is my command to correct the problem.

Network problems

LAN

Atheros AR8151 Gigabit ethernet controller Qaulcom - update the version of the default driver installed by win8 to newer version of 2.1.0.13. This version is available for download from the Atheros website or do some googling.

WiFi

Broadcom 802.11n network adapter - update the version of the default driver installed by win8 to newer version of 5.100.235.19. Or you can use original Acer drivers of the version of the Acers Web 5.60.350.6 site. This driver also works with Win7 and win 8

AMD graphics issues

OK now to correct graphics problems. What you need is to download the drivers from the site Web of AMD. You will need two drivers.

1 new drivers for AMD Radeon HD 5650

2 legacy for AMD Radeon HD 4250 drivers

Why you need two drivers. 2012 support AMD Radeon 5000 and more separately the Radeon 4000, 3000, 2000 series. I have donwnloaded driver for Radeon 5000 13.1 and legacy 13.1 driver for Radeon 4000.

After have downloaded you drivers unzip them into folders diffenert. For example, 13.1 - Radeon5650-AMD, AMD-Radeon4250-13, 1-Legacy. You can unpack the drivers by opening the installer .exe file. First setup just unzip the driver files and then start the installation. In this step, you can cancel the installation. This is the way how to unzip the drivers. Setup unpack the default drivers in the C:\AMD\ folder. Copy the unpacked in the created folder AMD-Radeon5650-13 files, 1. Unpack the second similarly legacy driver and copy the files unpacked in the created folder AMD-Radeon4250-13, 1-Legacy.

! Important!

Step 1: Install the drivers for the Radeon 5000 series. Do not install with the expedited process. Early pilots Choose Installation custominstallation. You can install all the componetnt except AMD Vision Control Center. Therefore, never install AMD Vision Control Center, because it's the new version which does not support the cards more old 4000 series legacy. If you install it, you will not find the power switch options Ati Xpress if you install.

Step 2: Restart the computer

Step 3: Install the radeon 4000 series pilots Legacy. Install all components AMD Vision Control center included. This version of the Control center, that's what we need.

Step 4: Restart the computer

Step 5: You can get warnings or error on graphics card if you check the peripheral Manager. Click devices and select Update driver - > choose Browse my computer for driver-> choose the folder where you have unzipped the driver files. Do this step for the second graphics card. And restart the PC.

That's all.  Everything works perfectly.

Tags: Acer

Similar Questions

  • Satellite A60-712 with ati2dvag ATI driver problems

    Using the notebook after a short time the ati driver crashes setting the display resolution to 640 x 480 and the minimum color depth.

    This is the error code:
    BCCode: ea BCP1: 83E23C90 BCP2: 83E31008 BCP3: 83F65008
    BCP4: 00000001 OSVer: 5_1_2600 SP: 2_0 product: 768_1

    I try but I can't be able to solve it, an idea?

    Hello
    I think that there are only two choices for you.

    The first is to uninstall and reinstall the ATI Driver.If that does not work, try to restore your system with the CD or DVD delivered.

    If after this procedure the fault persists, contact the nearest Toshiba Service Station for control of your laptop.

    Good bye

  • Satellite L505-13F - ATI drive update

    Hello.
    Anyone know how to update the driver ATI Mobility Radeon HD 5165?
    In the Web of Toshiba site we don't have only one pilot and it's from 03/05/10, and in the Web of ATI site they have support for Toshiba laptops!
    It's really annoying... Why Thoshiba laptop cannot be supported by the ATI site!
    The drivers they provide is outdated.
    If anyone has better drivers, say so. I have much apreciate!
    Thank you!

    Hello

    Toshiba says to use the drivers of Toshiba page that they will be modified to support the protection against overheating...
    But you can try to install Ati driver on the ATI site from Device Manager. Go to editing adapter nursery-display of the device driver. Choose the downloaded file and try to install. I don't know, if you can update what I haven't checked myself

  • Satellite A100-237 - where to download ATI driver for Windows 7?

    Toshiba Satellite A100-237: ATI Driver please

    It is no longer available on the toshiba site and don't be installed with windows

    Please any body can help me?

    Hello

    What version of Windows 7 you have?

    Satellite A100-237 belongs to the series of PSAA9E far as I know and so on the Toshiba site, I can download the Windows 7 32-bit display driver:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check it!

  • Video malfunction on Satellite - serious error on ATI driver

    Hey evebody,.

    several times, I have a change in the way that my screen is!
    Two things can happen:
    I have a serious error on ATI driver
    or my screen becomes readable with characters and bad diffcultly colors
    TNE only thing I can do is reboot... sometimes it works, sometimes not!

    Please help me!

    Eric

    Hello

    More information on the model and the number etc. would be useful. On the top of my head, I would say bad video memory. Maybe if you have a bad stick of ram shared memory. You could swap with a well known RAM and test it. If this does not work, you will need to replace the video card. Assuming it is not integrated into the motherboard. I'll assume for now that it is, as most Toshiba is designed this way. So the chances are replacing the motherboard will solve the problem.

    Another thing to try, because I did not understand your post completely. When you move the LCD screen this than that as well, or only when you change the resolution? First update all drivers and bios. Then try again and see if that solves the problem. Sometimes drivers damaged due to virus etc. and not working properly.

    I hope this helps.

  • Satellite A210-14s: Question about DDR2, ATI driver, Touchpad Dualmode speed

    Hello

    I just the A210-14. All in all a laptop very well I can say so far :)

    Got three questions/problems with it if:

    1. even if it should support the memory DDR2 - 667 Mhz, memory works only to a maximum of 600 Mhz, even when parameters are activated with High Performance and running with... quite strange food, necessary fix BIOS?

    2. the screen turns white everytime some time and a message appears that the ATI driver should reset itself. New ATI drivers necessary? As far I can tell the most recent is those who come with the book...

    3. in the activation of the Dualpad, it will not turn off. By pushing the button, it stays in Dualmode :(

    Suggestions, confirmation or info, ongoing work would be much appreciated.

    See you soon,.
    Landorian

    Post edited by: Landorian

    Hello

    I am trying to answer your questions, maybe my knowledge how can help you...

    1. How do you measure it? Perhaps with memtest or with cpu - z? Would be interesting because these tools do not support very well mobile chipsets. The other thing is that any level of performance, you, the frontsidebus is likely dynamically, but I'm not an engineer intel, so I can't give you a 100% response.

    2 hm, would be nice to put some new drivers on your platform. I suggest you try this site works fine for me:
    http://www.OmegaDrivers.NET/
    Just try it. :)

    3. err, you activate it and then turn off. Please explain a little more precisely because unfortunately, I do not understand it. :)

    So, I tried my best, I gave everything and I'm really exhausted now. Okay, it s do not save the planet, but I hope you have some success... ;)

    Welcome them

  • Flickering screen and ATI driver missing

    Hi, I had the flicker for about a week now. I went through the troubleshooting section and nothing seems to help. A few days ago, I got an error message indicating that my ATI driver is missing or does not properly. I uninstalled the driver and reinstalled and the error message no longer appears. Twinkle does, if. She goes through the steps: sometimes it won't waver at all and other times it seems that it is having a fit. Anyone know the cause of this? Thank you in advance.

    This can be caused by:

    1 - incorrect refresh.  Set the refresh rate of 60 Hertz

    http://support.Microsoft.com/kb/311403

    2-hardware acceleration.  Reduce the rate of acceleration or disable it.

    http://www.DeskShare.com/resources/articles/dmc_turnoffhardwareacceleration.aspx

    3. bad/hardware fault or video cable.

    John

  • ATI driver uninstalled and obtaining a black page says he needs the windows disc to fix the problem.

    Original title: Windows Vista Home Premium with upgrade

    I tried to update my ATI driver, and it got uninstalled. Now windows will not open. Black page says he needs the windows disc to fix the problem. The drive came with my computer. Download driver somewhere?                                                                                                                                                                         I am running windows Vista Home Premium with upgrade.

    Thanks Gene

    Hello Gene,

    You can try to perform a startup repair and see if it helps. You can check if your system has the integrated system recovery option to perform the Startup Repair. You can check in the advanced boot option to see if you have an option to fix the computer to perform the Startup Repair.

    You can read the following article to get started in the advanced boot options.

    Startup options (including safe mode)

    If this isn't the case, you have a Vista installation disk to perform the same.

    For more information, you can consult the following articles:

    What are the system recovery options in Windows Vista?

    Startup Repair: frequently asked questions

    Hope this information is useful.

  • Switchable graphics after installing new window. No ATI driver on the site of HP for Pavilion dm4 1140EZ

    Hello

    I had a problem with the black screen after logo window at startup. To solve it, I installed fresh windows 7 on my laptop Pavilion dm4 1140EZ. My laptop has Intel HD and ATI mobility Radeon 5000 graphics cards. On the HP site I downloaded the driver for Intel, but it lacked ATI driver for my product.  I went to the AMD site and downloaded catalyst control + driver for my ATI card but Intel graphics stops working correctly and graphic ATI did not work as well as on the Device Manager it has shown the device is functioning properly.

    After uninstall of Catalyst Manager Intel graphic it was OK. How should I me switchable graphics? My laptop is warming further than it used to be I think may be due to works on Intel graphics only the video quality is very bad. Kindly help me to install progressively switchable graphics.

    You can use the recovery media to reinstall the graphics driver AMD. Never install the Catalyst Control Center and the AMD driver. The graphics driver for a laptop with switchable graphics is specially coded to provide this functionality. Do not install the Intel driver separately because it would cause the feature switchable graphics to stop working. AMD owns ATI.

    Find the graphics card AMD driver software, click in the box to the left and then click on install.

  • Catalyst control center and ati driver problem

    I installed Nvidia Geoforce GT630 in my Inspiron 570... Windows 7... 8 GB ram

    Processor a Main Circuit Board b3.00 gigahertz AMD Athlon II X2 250256 kilobyte primary memory cache2048 kilobyte secondary memory cache64-bit readyMulti-core (2 total)Not hyper-threadedBoard: Dell Inc. 04GJJT A00Serial Number: ..Bus Clock: 200 megahertzBIOS: Dell Inc. A05 12/20/2010
    
    A window pops up with ATI Warning and the following message:
    
    "Catalyst control center is not supported by the driver version of your enabled graphics adapter.
    
    Please update your ATI graphics driver, or enable your ATI adapter using the Displays Manager"
    
    ----
    
    I can't find the ATI adapter in the Displays Manager. I seraced for a new ati driver but didn't find anything for my puter.
    
    Also, in the PNY instructions it had the following....which I could not find:
    
    If you purchased a PHNY GeForce PCI grapics card and if you have on-board graphics,
    
    enter the system's BIOS setup and look for a setting called "Primary Display Adapter" or something
    
    similar. Set this to "PCI". If you cannot locate this setting, please contact you system manufacturer blah blah blah.
    
    Anyway, there was no such setting in my BIOS.
    
    Anyone have an idea how to fix or get rid of the catalyst control center?
    
    Thanks
    

    Hi scottparat,

    Yes, please go ahead and uninstall the full program from the computer and restart the computer.

    Also in the device under the Graphics Manager that you need (either Ati or nVidia Geforce GT630).

    Please write back to us.

  • I can update my acer aspire 5742G ATI 5470 graphics card

    Can I update my laptop Graphic card

    News of the laptop:

    Acer Aspire 5742G
    Intel Core i3
    15.6 HD Led LCD
    ATI Mobility Radeon HD 5470 graphics card
    4GB Ram DDR3 memory
    HARD DRIVE 320 GB
    DVD-Super Multi DL drive
    Acer Nplify 802.11b/g/n
    6 - cell Li-battery

    Quote your version of Windows.

    Questions like this are best asked of the manufacturer of the laptop.  If the video card is integrated into the motherboard, you will probably not be able to replace it, but the manufacturer must have this information.

  • Satellite Pro A40 guard stop with the ATI driver error message

    My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.

    Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.

    My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?

    Thank you very much
    Keith (South end)

    Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.

    As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.

  • Satellite Pro A60: ATI Driver update?

    Had some problems, first was the display went mode without failure and the second my daughter said it came with a fatel error message. However, I rebooted and it came with the usual send message from microsoft error report, which is essentially an update to the ATI Graghics driver, but the link on the microsoft page does not work.

    Then I went on the Web site of ATI Technologies Inc. and the drivers download page, but I'm not sure of that that I should go to.

    The A60 runs Windows Home Edition and looking at control panel > maintenance > system > drivers seems to have ATI RS200/RS200M/RS250M Accelerated Graphics Port.
    ATI 01/06/2004
    Version 5.1.2196.1009

    When selecting the site of ATI, that is what I want? Radeon?

    The recovery disc, seeing if I could update the driver from there, comes to tell version differs currently installed, which is what you expect.

    Any guidance would be appreciated.

    By the way, I have also just installed an another Crutial 512 MB of memory in the expansion slot, but has nothing to do with the ATI issue that took place before that I installed RAM (now takes 1 minute and 20 seconds to restart ~ Yes)

    Hello

    Sorry, but I didn t understand what kind of problem you have, but if you have problems with the display driver, enter the properties of the graphic adapter and remove the other preinstalled. After having done that reboot the computer and install the driver you can download on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    You will find some version of 6.14.10.6430 ATI display driver.

  • Satellite L650-1FU - cannot install the new page ATI ATI driver

    Hi all

    Everytime I try to download and install the latest driver for my L650 ATI he says he does not support! I can only install one that is available on the website of Drivers from Toshiba. However, he's old enough!

    Can you give me a hand?

    It is correct.
    As far as I know the reason is the following:
    The ATI card that nVidia drivers are not changed and not designed for mobile use.
    The point is that the use of these drivers, the GPU would go better performance and this would lead to higher levels of temperature.
    This can affect the GPU and in the worst case sound leads to damage GPU.

    As far as I know Toshiba use clean, updated drivers as well as some other notebook manufacturers.

    However, in case you want to install this driver, you have to through the Device Manager.
    You can use the "Advanced" installation procedure which allows to point to the driver folder that contains the files from ATI.

    But the use of these drivers is at your own risk

  • Re: Trying to update the display on Satellite A305-S6843 ATI driver

    OK, I have a
    Satellite A305-s6843

    64-bit Windows

    and I have the
    ATI mobility radeon hd 3470 graphics card
    I installed the driver version is 8.501.0.0

    I want to install the new driver I found and this is the version
    8.632.1.2000

    so my questions
    1. where can I get
    2. How do I install it because toshiba and the ccc do not play nice with them

    Hey,.

    To be honest I don t understand your problem... Why are you looking for other drivers? What is so important or better? I don t think so

    You should read the announcement of Quad. Toshiba offers clean and * pretested * see the drivers they will work 100%. In addition, they have overheating protection so I put t understand why you're looking for other drivers.

    Prior to installing the most recent Toshiba display driver, remove the old version and restart your laptop. Then start the freeware CCleaner tool to clean the registry and reboot again. After that install the Toshiba display driver, everything should work now or not?

Maybe you are looking for

  • PCI after Downgrade from Windows 7 device drivers?

    Driver for: Device PCI, PCI Bus 3, device 0 - int 0 Message: The drivers for this device are not installed. (Code 28) To find a driver for this device, click Update driver. Downgrade from Windows 8 for Windows 7 64 bit, driver problems!  Have you tri

  • fragment of the bitwise operation

    Hello I have the following piece of code I have to implement in LABVIEW CRC_REG = CRC_REG * 2;      a bit to the left IF (CRC_REG > = 0 x 1000) / / realization of 12 bit restrictionREG = CRC_REG - 0 X 1000 CRC_ + 1 where CRC_REG is a 16-Bit Register.

  • How can I create a junk mail folder so I can watch the outlook express emails is filter

    Laina I have run outlook express for my e-mail but don't have a junk folder; That's why I don't get e-mails I want; How can I create a junk mail folder so I can watch the e-mail program's filter? Thank you!

  • Windows 7 tries to connect to an unknown wireless / network wifi (neighbours)

    I am new to Windows 7 and any ordinary member of the public - not a computer expert to provide basic instructions (model instructions) If you are able to help. I have posted this question elsewhere and had 3 responses but I can't follow responses.) T

  • Facebook SDK problem

    Hi guys,. Yesterday, I downloaded the Facebook SDK http://sourceforge.net/projects/facebook-bb-sdk 0.8.16 and successfully integrate into my application and it worked perfectly fine for me.when I tried to use it today it newspaper successfully and pr