Catalyst control center and ati driver problem

Similar Questions

• HP Pavilion G6 1160eX l: lost catalyst control center and grphics switchable

  Hi I have deleted all of the ati files in my pc and reinstalled the new amd for driver accedintly

  and switchable grphics lost in my pc options

  now I don't know what to do to restore the switchable graphics settings in my laptop or the old catalyst control center

  Please help me

  I tried and the same problem exists

  and when I install the package in your previous posts there is problem in the installation of visual c +++ 2010

  should I remove it from my camera

• Laptop HP pavilion 2002tx g4: lost catalyst control center and grphics switchable

  
  

  Hello

  @shenlon

  I do not understand everything that you need or what you've done. Can you give a more detailed explanation?

  Did move you from an earlier Windows 7 operating system?

  What discrete graphics (NVIDIA or AMD) card is installed in your laptop?

  What is the installed processor?

  You will need to install only the system of operatng any graphical drive AMD high definition (HD) to return the Catalyst Control Center that allows the switchable graphics. Run the installer twice. The first time you run it delete everything when asked and second time install everything when asked.

  The required drivers for Windows 7, 8 and 8.1 are found in the following web support document. What one do need it?

  Click on edit and then click Update to change the version of Windows drivers that appear.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G4-notebook-PC-series/5226238/model/5264284#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Answer my questions in a new post instead of constantly changing the original to avoid confusion. I really can't help you if you don't answer my questions.

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• dv7t-6c00Quad installed Win8Pro (final version) & ATI Catalyst Control Center fails

  My laptop is the dv7t-6 c 00 Quad and I just installed the version of Windows8 Pro (I am a member of MSDN Developer).

  Everything went fine EXCEPT the ATI Catalyst Control Center does NOT work.  I tried to reinstall the graphics driver (sp55098.exe), but it won't work because it does not "meet the minimum requirements" (which I assume means that it has not been updated to handle Windows8.

  The result is that my system has become unstable. I guess that's because the control center would deal with switching between low power and high power/performance chipsets.  I noticed that this change can occur on the fly and seems to have with a web browser (Internet Explorer).

  It's REALLY BAD, because it crashes my system.

  Please respond and tell me that there is a SOLUTION NOW!

  * Notes: I tried to launch Catalyst Control Center and get this message, "Catalyst Control Center cannot be started.  There are currently no parameters that can be configured using Catalyst Control Center".  AAARGH!

  Tom

  It's the definitive answer to AMD.  HP must deliver the updated for my portable operarting under Windows8 Catalyst drivers.  I hope it will be soon.  In fact, I'd be happy to beta test.

  Here is the answer from AMD:

  Dear Thomas,

  Your service request: SR #{ticketno: [8200508926]} has been reviewed and updated.

  History of application of Service and response:

  As AMD only provides the reference for laptops drivers (provided as-is with limited support), sometimes our software is not compatible because changes made to the graphics card from the laptop manufacturer to improve stability and performance in the laptop. The error you receive indicates that the Radeon card in your laptop is incompatible with our drivers, since the manufacturer of your laptop has changed the Radeon card enough such that our drivers will work with your product. As such, you will need to contact HP for pilots and support to download and install. We will have all the drivers for your system that will be compatible, you will be forced to go with HP. We apologize for any inconvenience this might cause.

• I uninstalled Catalyst Control Center who uninstalled a few other related things, one of them my videocard (problem of graphics)

  I uninstalled Catalyst Control Centre, where it took place, it kept blowing - rises, saying it had stopped working. I also read somewhere (not Wikipedia) the Catalyst Control Center was a virus so I uninstalled, which uninstalled a few things related to it one of them my video card I understand now manages the screen resolution, colors, my customization in Chrome color settings, and many other features which I'm just discovering. She brought to the resolution of the screen on my laptop (much it zooms) and reset all my customizations of color to the standard that I hate. I wonder if I have to reset my computer to an earlier date, or if I have to download a new video card. I downloaded the Catalyst Control Center and what came with it but nothing has changed now, options in the control panel > appearance and personalization are missing which is what I used to make my settings and where it let me normally the change of colors (I picked red) are all gone. The screen resolution is still a little low (which means its still slightly zoomed in) in what she was before, and how I liked it, but at least I can still do what I have to (I use this computer mostly for Facebook and games my whole life revolves around both of them, for me so it is essential that this problem may not seem like a large face you (, but for me it is!) So should I reset my computer to an earlier date or download something or what. Help me please. If I have to do a system restore could someone please tell me how or where to go?

  I use Windows Vista 32 bit Business. Thanks guys,-Zane.

  Hello

  First of all, try to download the latest display controls and see if still then restore the computer to a previous state, while it was working fine.

  http://www.ATI.com/products/catalystcontrolcenter/

  http://www.AMD.com/us/products/technologies/AMD-catalyst/pages/catalyst.aspx

• ProBook G1 450: Problem with Catalyst Control Center

  So I'm a gamer and I want to improve my performance, so I searched around the internet and found a thing called the Catalyst Control Center and he had an option to Overclock, I thought it was a great idea to speed up my pc, so I downloaded it, but during the installation it says it found no compatible hardware? AFAIK the ProBook G1 450 have Intel HD 4600 Graphics and AMD Radeon HD8 8750 M, so what gives? Can I get help please?

  P.S. I checked the drivers and he said I had the latest drivers installed, so I have no idea what could be the problem.

  Try this driver http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_154962_1&swEnvOid=4192

  If still happens once, respond with error message.

• Catalyst Control Center does not (hp pavilion dv6)

  I downloaded Catalyst Control Center several times, but it still does not. I have Paviliion dv6-6120se, AMD radeon hd 6490M and integrated intel GPU hd 3000 the two GPU works well but the problem started when I uninstalled the Catalyst Control Center to obtain a new update site Web of AMD. But the site says my version of the radeon hd 6490 M AMD does not support in any way I tried everything I uninstalled the driver of ATI GPU and install again. Somehow, I downloaded Catalyst Control Center and the installation is complete and the same problem, it's still not working. Please any help would be appreciated. Now, I've lost the Catalyst Control Center and the switchable graphics config. help please.

  Hello

  As you have switchable graphics, you will need to download and install the driver of HP - it is on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Catalyst Control Center won't open, please help

  Hello everyone I have a laptop HP DV7 - 6 c 00 with a card ATI Radeon HD 7470 M running on 64-bit Windows 7 SP1.

  Now a few days ago, I could open Catalyst Control Center (CCC) or "configure switchable graphics" but now, for some reason that I'm not able to open what makes me really upset because I've had nothing but bad luck with this laptop.

  When I was able to open CCC when I tried to configure switchable graphics, it only helped me select programs to use with switchable graphics, this is not what I wanted.

  I wanted to like my other HP laptop where if I plug my charger it asks me to change graphics card and if I unplug it, same thing.

  I could get my other laptop works correctly with the switchable graphics option in getting the last graphic card ATI radeon for this laptop, but for some reason that I can't do with this laptop. It seems that the pilot of 7470 m radeon hd can only come from HP.

  Even when I downloaded the correct driver or automatic detection utlity Radeon site, it gives me an error of incompatible hardware, and the installation is aborted.

  So very well since I wanted to correct my switchable grahics problem where it is more general (not ask me to change when I plug / unplug the charger) told me that I had to update my bios. Then I updated my bios from HP website. Here is the link I used

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5214391&...

  Okay, so after I updated my bios I've gone into bios and entered the 'switchable graphics option' and changed momentum for "fixed".

  After the reboot, I can not open the CCC (I could not open it before that the bios update or the other, I was hoping that the bios update would fix it)

  Then I tried to go to the "HP Recovery Manager" and reinstall the AMD graphics card driver, which didn't work.

  I tried to go to 'Add Remove Programs' and I tried the 'fix' of 'Catalyst Install Manager' option and it does not work...

  As I said... I am very satisfied with this laptop, it seems that it is almost a daily chore to keep this laptop work properly. Every day, it seems that I'm fixing something...

  Personally, I don't know if switchable graphics has been a great idea/option, I mean, he seems to have the best intentions in the world, but all google searches I've done, it seems hardly all work correctly.

  Now, I am a dedicated HP customer, I bought 10 + laptops and desktops Desktop 5 + years, but I am very disappointed with this laptop... or maybe I'm just upset =)

  Is someone can please tell me what I should do to get CCC works so I can set up my advanced graphics card and fix my switchable graphics.

  Now, none of the drivers were working from the AMD website, but I could try to download their Catalyst Control Center app, do you think it would work?

  I really need some advice on this one there...

  Thank you all for your time and help

  OK well first off I want to thank everyone for all their support and answers! Hahah =-)

  Well, since I've had these great suggestions, it was extremely simple to fix this problem...

  Okay well I was able to find a solution to this problem on mine and here is how I did incase anyone runs into this problem and is in need of a solution as well...

  As I said above "switchable graphics" has never worked on my HP Pavilion DV7 laptop since the first day. So in order to get switchable graphics work where he asked me "can I watch change graphics card" anytime I plug or unplug my charger for my laptop, I had to update the bios.

  After I updated the bios and rebooted the computer I had to go into the bios settings and change switchable graphics of 'dynamic'-> 'fixed '. This would allow graphics cards to move whenever the charger is plugged or unplugged, only graphic rather than spend proccessors on some applications (which is a nightmare!)

  Good then after that I updated the bios I tried to open it "catalyst control center" which does not open. After trying to reinstall the graphics driver to "hp Recovery Center" CCC would not always open.

  So here's what I did...

  First of all, I went 'Add Remove Programs' and remove the Cataylist Installation Manager

  Then, I ran CCleaner and did an analyization of my registry and delete everything that relates to the ATI graphics card, which had lots of locations in the registry.

  Then I went to the official driver from HP site for my laptop computer and downloaded the driver for my graphics driver for Radeon HD 7470 M.

  After installing the driver and restarting my computer, I could finally open Catalyst Control Center and switchable graphics finally working the way I wanted it!

  Well now, this problem is resolved...

  Right, now I always have problems with BSOD (blue screen of death) which I think that I have under control, but now I'm having a problem with my laptop which no matter when he goes into "sleep mode" and I try to take over the laptop, just of freezes and stays on the black screen, even with the light on the button (f10) wifi on and the light button mouse on...

  When it goes into sleep mode, I can't get the laptop to resume, I have to turn off it and then restart it back...

  I swear that this HP Pavilion DV7 was nothing else than to the problems of... but me, I learned a lot by setting all his questions and I hope to have this resolved as well...

  Well I hope that my experience with Catalyst Control Center and switchable graphics will help someone else's problem, and thank you all who participate on this forum (but not on my thread!)  =)

  Well, I just want to say one thing... HP makes great computer/laptop and I love them. All computers will have problems, it's just normal. I know that my next HP computer will not switchable graphics!

  gh0st-HP

• HIS 5770 + AMD catalyst Control Center does not load.

  For Christmas, I got 2 5770 ITS graphics cards, incredibly excited when I was driving back to the college to put both and start playing games, I prepared the diskette and waited for it to load. Then I clicked on the button "Install Drivers", asking me if I want to English, I accept and click Next. He then tried to open the "Catalyst Control Center", which does not immediately and closed. This happens with all the drivers that I try to ati and sound. IM downloading the 64-bit versions of sence you know I have windows 7 professional 64 bit. idk what to do and need help on this, id like to get these working in the crossfire and let it roll.

  Thank you.

  Intel DX58SO motherboard

  Intel Core i7 920 to 2.7 ghz

  6gbs of ram ddr 3

  1 TB harddrive

  hd5770 2 current is SOUND

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• How can I fix windows 7 Catalyst control center host application has stopped working

  I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• HP Pavilion TX 2136 G6: "AMD Catalyst Control Center" does not

  "Advanced Micro Devices, Inc. - Display - Radeon (TM) HD 7670 M

  "Download size: 106.4 MB.

  After that this updated AMD catalyst controller stops working and apps like Youcam and will not launch games.

  Please help me with this problem.

  Thanks in advance

  Prai

  Hello;

  Let me welcome you on the HP forums!

  I read your post about the problem of Catalyst Control Center and wanted to help.

  Is this an update of driver that has been installed by HP Support Assistant?

  Or (more likely) you go to AMD and download yourself?

  Because if the latter, which was a big mistake!  Laptops come with specialized equipment for which the drivers are delivered only by OEM - in this case, HP.

  What you need to do is the following:

  (1) download and run this utility AMD to remove AMD drivers you installed: utility uninstall own AMD

  2) go to this HP Product Page and download the AMD drivers and install THOSE: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-Notebook-PC-series/5262606/model/5293908

  After that, you should be OK.

  And stay away from downloading drivers from the Internet for your laptop.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP program installation doesn't install Catalyst Control Center.

  Hello.

  I have a HP g6 - 2324TX with a 4 DDR3 8 DDR3 Windows 8 upgrade

  Catalyst Control Center had recently stoped working, and my computer was basically killed himself, so I used the restore option in the options to start making a new installation of windows. It would have been perfect for my same situaution but it has not installed the Catalyst Control Center. Now, I'm pretty experienced with PC and know my way around them well... But it got me in trouble.

  To solve my problem, I tried the following.

  -Download the AMD drivers from their site, but it does not work on the number that it needs drivers HP. The CCC has not just run.

  -Download HP drivers on their website, the instalation was good up until when I rebooted it was not installed from CCC.

  -J' tried to install the HP drivers and then installing the CCC to AMD, but it still doesn't work.

  -J' tried looking for a solution on the internet, such as... Make sure that my C:\User folder is not hidden.

  I would also like to note that the relocation with a startup disk is not an option.

  That's all that I remember of trying, I'm a gamer so Switchable graphics is Important.

  Wish a quick response.

  Specifacations:

  -Windows 8 x 64

  -Intel (R) Core i5-3230 CPU 2.60 Ghz Duel Core

  -8.00 GB of Ram DDR3 (7.89 usable)

  -Intel(r) HD Graphics 4000

  -Radeon (TM) HD 7670M

  -500 GB hard drive

  ManticTalbot wrote:

  Hello.

  I have a HP g6 - 2324TX with a 4 DDR3 8 DDR3 Windows 8 upgrade

  Catalyst Control Center had recently stoped working, and my computer was basically killed himself, so I used the restore option in the options to start making a new installation of windows. It would have been perfect for my same situaution but it has not installed the Catalyst Control Center. Now, I'm pretty experienced with PC and know my way around them well... But it got me in trouble.

  To solve my problem, I tried the following.

  -Download the AMD drivers from their site, but it does not work on the number that it needs drivers HP. The CCC has not just run.

  -Download HP drivers on their website, the instalation was good up until when I rebooted it was not installed from CCC.

  -J' tried to install the HP drivers and then installing the CCC to AMD, but it still doesn't work.

  -J' tried looking for a solution on the internet, such as... Make sure that my C:\User folder is not hidden.

  I would also like to note that the relocation with a startup disk is not an option.

  That's all that I remember of trying, I'm a gamer so Switchable graphics is Important.

  Wish a quick response.

  Specifacations:

  -Windows 8 x 64

  -Intel (R) Core i5-3230 CPU 2.60 Ghz Duel Core

  -8.00 GB of Ram DDR3 (7.89 usable)

  -Intel(r) HD Graphics 4000

  -Radeon (TM) HD 7670M

  -500 GB hard drive

  Download the softpaq to download driver HP portal section AMD graphics driver web support for your laptop. Double-click the downloaded softpaq. It will install the driver AMD, Catalyst Control Center and driver Intel.

  Do not install the Intel graphics driver separately. This will stop the switchable graphics feature can be used.

  Do not install the graphics drivers Intel or AMD. The drivers from the manufacturer are not to conform to the switchable graphics feature. This is why they do not work. Install graphics HP drivers only if you want the feature to function.

• Cannot remove the Catalyst Control Center

  Original title: Catalyst Control Center

  I want to uninstall my CCC, but unfortunately the CCC Install manager has been uninstalled by mistake.

  I can uninstall the CCC with on the Installation Manager, or I can re - install the Manager of the facility on its own to allow me to do the uninstall.

  Hi Nick,

  1. What is the error you received when you try to remove the Catalyst Control Center?

  2. What is the brand and model of the PC?

  Catalyst Control Center is ATI so check with the ATI support, their documentation online
  and drivers and ask in the Forums of ATI for known issues.

  In addition, you can try to reinstall the CCC and then check if you receive an error message.

  If you are unable to remove the CCC, and then run the Fixit.

  The problems that the programs cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall/en?WA=wsignin1.0

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Hope this information helps.

• "Catalyst Control Center has stopped working: the Application host.

  The message displayed when the system starts up.  Has just begun and there has not been any changes to computer programs.  How can I fix the problem?

  Hello

  Catalyst Control Center is ATI so check with the ATI support, their documentation online
  and drivers and ask in the Forums of ATI for known issues.

  AMD/ATI - assistance and pilot - search
  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.2&product=2.4.2.3.9&ContentType=GPU+download+detail&OSType=Windows+8+Preview+-+32-bit+Edition&keywords=&items=20

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">