Aspire 5562 camera, touch pad and card reader does not

Similar Questions

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• Satellite A300 - dvd, usb and card reader does not work

  Help needed please.

  Have a laptop Satellite A300, running vista.

  Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

  The usb scanner is recognized as an external memory card and the other usb port does not fuction.

  I have not installed or don't remember changing of settings or do whatever it is the habit.

  Any help or thoughts would be appreciated.

  Hello

  Your ad is very confused.
  > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
  Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
  It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

  > The card reader can't find anything on the card (and Yes, the card was full).
  Did you use a compatible card? The laptop runs these cards:
  8MB - 2 GB SD card
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  I recommend also to format the card and to copy files from computer, and then test this.
  You can also reinstall and update the driver for the card reader controller...

  > The usb scanner is recognized as an external memory card
  Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• My built-in memory SD card reader does not work on Windows 8

  I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32.  Everyone knows about this problem, and if so how to solve? Thank you

  Hello

  I understand that the casting of card reader does not work on your laptop.

  1. you get any error message?
  2 have you tried with different memory cards?

  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:

  You can try to run the hardware and devices Troubleshooter and check if it helps.
  a. press the Windows key + R, type Control Panel.
  b. type troubleshooting in the search bar, click Troubleshooting.
  c. click on hardware and sound, click hardware and devices.
  d. follow the steps in the wizard to run the troubleshooter.

  Method 2:

  You can download the driver for the reader from the link below and install it in compatibility mode.

  http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• Acer E1-510 card reader does not not after upgrade to win 10

  Hello

  Afer upgrade to win10, card reader does not work. I tried to install the drivers: CardReader_Realtek_10.0.10125.31214_W10x64_A and CardReader_Broadcom_16.0.2.8_W81x64_A, but without success. I installed an and restart and no results. Same with the second. I use the wrong version or what?

  When I go into Device Manager, I can't identify what is the card reader in the list, even before and after installing these drivers.

  

  Yes, Realtek site seems now.

  It was my first choice... we'll wait.

• Product name: HP 15 Notebook: my card reader does not work - Mute red light does not

  My card reader does not work

  It happened several times after the upgrade to Windows 10

  It may work once or twice after the upgrade, but when there is an update from HP

  My antiverious is Kaspersky internet security and it is compatebale with windows 10

  Also, the Red mute botton does not work but the function works.

  your opinion and your support is appreciated

  Product number: L9N79EA #A2N

  Product name: HP 15 laptop

  Windows 10 House only 64-bit language

  Hello @KhaledMorcy,

  I understand that you are having a problem with your card reader and wanted to help you!

  Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10?  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Also, check out the following document, as it can help to solve the problem for you:

  HP laptops - use and troubleshooting (Windows 8) memory card readers

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  Hi dove2k,

   

  Welcome to Microsoft Answers Forums.

  You will need to enable the touchpad on the laptop itself.

  Find the area of the touch pad, you will find a button to enable or disable the touchpad.

  If the step above doesn't, try this step.

  Go to control panel > mouse > device settings tab
  Click (or to disable)

  

  Notes:
  On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
  You can click on Reset device if none of these solutions work.

  If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• driver Ricoh SD card reader does not work after recovery/vista

  Hello

  I have toshiba laptop with vista professional.

  I did the recovery on computer

  Once the recovery sd card reader does not work.

  Yes, I did:

  Downloaded latest driver ricoh xd card disk image

  installed

  restarted

  .. .but still does not work

  does anyone have a solution for this?

  Thank you, klemen

  You update your copy of Windows as directed by my last answer?

  I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Check the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.

  Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'.  In the Details under "Ownership" tab select "hardware ID" note the entries under "value".

  You can try to install the drivers built into Windows Vista

  1. in the Device Manager, click on your PC
  2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
  3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
  4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
  5. under "Manufacturer", select "Ricoh company.
  6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
  7. the full wizard.

  There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.