Aspire 5738z motherboard works outside the laptop breaks but not?

Similar Questions

• My site works in the United States but not in the Canada (I know sounds crazy)

  I have a client in the Canada who is having a few problems of very annoying site. The problem is when I test the site here in the United States, it works fine. I clear my caches and test the site on Chrome/Safari/Firefox and it works fine. I have my client the same thing, but they still run questions.

  They say the site:

  (1) takes more than 20 seconds to load, it takes only 8 seconds here in the United States.

  (2) they tell me that when they try and share a link on directly linked from the blog, they get a 404 error.

  (3) they say that the site does not work on the iPhone 5.

  Yet once, all these things have been tested here in the USA and I'm not able to replicate questions. What in the world could possibly happen?

  Here is the link to the site Kneed | Home

  Thank you

  Morgana

  Well, you use widgets 'localized' like the one for the card that, depending on the regions and the Internet, location of the provider may give different reslts, possibly including break completely, then the carrier of the supplier registration point to a different location than the one you are actually. The rest could be simply regional caching problems with TypeKit and your images and videos, but even on my fast fiber your page access charge with delay due to a large images used. The 404 would probably also fall into this category - you are being invited to a different resource at the regional level rather than one you do reference on the page. Loading times are also confirmed by your own comments - another 8 seconds is something that I would find much too long on what should be a simple thing. You need to spend time optimizing everything and check when cross-border is the features that you use, somehow...

  Mylenium

• How to load Firefox version I was using before the update for Firefox 29? The Norton toolbar has worked in the last version, but not in Version 29.

  I've just updated to 29 of Firefox. Since the update the Norton Toolbar is no longer compatible. The Norton toolbar has worked in the last version of Firefox that I had installed. Is there a way to get back to the last version of Firefox where this toolbar is compatible and keep all the settings (favorites) in the old version I am reloading? All my passwords (99) are in the toolbar Norton Safe ID. Now I can not connect to many Web sites.

  Hello jimb01, yes norton supports only the stable versions of firefox and Firefox 29 you are using the beta version of the browser. You can download the normal version of firefox 28 of https://www.mozilla.org/firefox/channel/#firefox and install it on top of your current installation...

• Why build application vi works in the development environment, but not in the executable file; error 1025

  Hello

  I have a request ('A') that I am trying to build another application ("BuildA").

  I can create a request for A manually of its project using the Build specification, and it works fine (A.exe).

  Also, when I run BuildA.vi in the development environment he calls the "Build.vi" properly and again generates application A.exe very well.

  Then, when I ask BuildA (manually) and run BuildA.exe, I would expect that it also creates A.exe as BuildA.vi did in the development environment.

  However, it fails with the error:

  Code: 1025

  Reference VI opened in .vi NI_App_Builder_API.lvlib:Build (path)-> BuildA.vi
  Path of the VI: C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi

  I noticed this thread , which looks like a similar problem, but has reached no conclusion.

  Why BuildA.vi works fine in the LabVIEW environment, but the application that builda.exe does not work?  All paths are hard-coded, so it shouldn't be a path problem.

  Thank you

  -john

  eye_in_the_sky wrote:

  I guess we will have to keep the application building separated the disappointment... automated scripts

  There are still other options.  Lets say configure you VI to run then.  If you ran the following command from your script line

  "C:\Program NIUninstaller Instruments\LabVIEW 2011\LabVIEW.exe" "C:\BuildA.vi".

  It would then open your BuildA.vi in LabVIEW and run in the development environment.

• Contact form works on the host server, but not the Web Page

  I created my first site with CS6. I decided to throw a contact form, so I went to my host providesr, Network Solutions, which has a Wizard for a contact form. I used the wizard to create a contact form. When I access the page on the Host Site for Network Solutions, the contact page is formatted with colors, I chose and it works correctly. Declined, I hit Submit, the message is sent to the approprate address.

  I used the GET function to bring the new page of my local site and then synced it with the real Web site. The formatting, I've created on the server host does not appear, but the Contact form is on the Web site I created in all white. Fill the fields of the form, but when I click on the botton to SUBMIT, a dialog box appears saying it does not find the Web page.,.

  Does anyone know what error I do?

  Thank you

  Put the complete url in the field of action.

  "action ="http://yourWebAddress.com/cgi-bin/FormMail.contact.pl"

  Then see what happens

• Code works in the timeline panel, but not in the class

  Hello, I have the following code which works in the timeline, but if I change it to the class I get this error.

  I will be very happy if someone can help me solve this problem.

  Error here:

  TypeError: Error #2007: Parameter child must be non-null.
            at flash.display::DisplayObjectContainer/addChild()
            at Function/Main/private:completeMenuLoad/goContent()
  

  Code scenario here:

  import flash.display.*;
  import com.greensock.*;
  import com.greensock.easing.*;
  import flash.net.URLRequest;
  import flash.net.URLLoader;
  
  
  var signUpUrl:URLRequest = new URLRequest("../swf/signUp.swf");
  var logInUrl:URLRequest = new URLRequest("../swf/logIn.swf");
  
  
  var content1Loader:Loader = new Loader();
  var content2Loader:Loader = new Loader();
  
  
  content1Loader.load(signUpUrl);
  content2Loader.load(logInUrl);
  
  
  var buttonA:Array = [signUp_btn, logIn_btn];
  
  var prevOnStageLoader:Loader;
  
  for(var i:int=0;i<buttonA.length;i++){
  buttonA[i].addEventListener(MouseEvent.CLICK, goContent);
  }
  function goContent(e:MouseEvent):void
  {
  if(prevOnStageLoader){
  TweenLite.to(prevOnStageLoader,1,{x:stage.stageWidth});
  }
  prevOnStageLoader=Loader(this["content"+(1+buttonA.indexOf(e.currentTarget))+"Loader"]);
        addChild(prevOnStageLoader);
        prevOnStageLoader.x = -1250;
        TweenLite.to(prevOnStageLoader, 1, {x:0, ease:Elastic.easeInOut});
  }
  

  Code of the class here:

  package 
  {
  
  
            import flash.display.*;
            import flash.net.*;
            import flash.events.*;
            import com.greensock.*;
            import com.greensock.easing.*;
  
  
  
            public class Main2 extends MovieClip
            {
                      private var signUpUrl:URLRequest = new URLRequest("../swf/signUp.swf");
                      private var logInUrl:URLRequest = new URLRequest("../swf/logIn.swf");
                      private var content1Loader:Loader = new Loader();
                      private var content2Loader:Loader = new Loader();
  
  
                      public function Main2()
                      {
                                content1Loader.load(signUpUrl);
                                content2Loader.load(logInUrl);
  
  
                                var buttonA:Array = [signUp_btn,logIn_btn];
                                var prevOnStageLoader:Loader;
  
  
                                for (var i:int=0; i<buttonA.length; i++)
                                {
                                          buttonA[i].addEventListener(MouseEvent.CLICK, goContent);
                                }
                                function goContent(e:MouseEvent):void
                                {
                                       if (prevOnStageLoader)
                                       {
                                                 TweenLite.to(prevOnStageLoader,1,{x:stage.stageWidth});
                                       }
                                       prevOnStageLoader = Loader(this["content" + (1 + buttonA.indexOf(e.currentTarget)) + "Loader"]);
                                       addChild(prevOnStageLoader);
                                       prevOnStageLoader.x = -1250;
                                       TweenLite.to(prevOnStageLoader, 1, {x:0, ease:Elastic.easeInOut});
                                }
                      }
              }
  }
  
  

  OK, so the problem is SOLVED. I don't know where the problem was because I solved as so much ' try & test - try & test...» ', but

  I think that the problem was a table that should look like this:

  in the Main() public class

  private var buttonA:Array = new Array();

  in constructor

  Button = [signUp, login];

  and the full code here:

  package

  {

  import flash.display. *;

  flash.net import. *;

  import flash.events. *;

  import com.greensock;

  com.greensock.easing import. *;

  SerializableAttribute public class extends MovieClip Main2

  {

  private var container: charger;

  private var content1Loader:Loader = new Loader();

  private var content2Loader:Loader = new Loader();

  private var signUpUrl:URLRequest = new URLRequest("..) ("/ swf/signUp.swf");

  private var logInUrl:URLRequest = new URLRequest("..) ("/ swf/logIn.swf");

  private var buttonA:Array = new Array();

  constructor function

  public void Main2()

  {

  content1Loader.load (signUpUrl);

  content2Loader.load (logInUrl);

  Button = [signUp, login];

  for (var i: int = 0; i

  {

  buttonA [i] .addEventListener (MouseEvent.CLICK, goContent);

  }

  }

  private void goContent(e:MouseEvent):void

  {

  If (container)

  {

  TweenLite.to (container, 0.8, {x: 1250, ease:Cubic.easeInOut});})

  }

  container Loader = (this ["happy" + (1 + buttonA.indexOf (e.currentTarget)) + "Loader"]);

  addChild (container);

  Container.x =-1250;

  TweenLite.to (container, 0.6, {x: 0, ease:Quart.easeInOut});})

  }

  }

  }

• Pinch & Zoom works in the content viewer but not the developer application

  I have all articles in PDF format, version of the viewer just tried 24. The work of pinch & zoom very well in viewer content but I just tried to create the application (simple edition for now), and the p & z does not work in the application of the developer. If that is not allowed in simple edition or am I missing something?

  The zoom allow PDF has been checked in the application builder DPS as well as advanced options in the first window.

  As always, thanks for the help!

  Yes, that makes sense. Some customers have reported problems pinch and zoom to trigger reliably with the pinch gesture. We're investigating.

  Neil

• FM11 to RH10: FM Cross Refs works on the FM band, but not in HR.

  Using Win7 32 bit, 4 CHT (FM11/RH10)

  FM11 Cross Refs work in FM11 as well as in the output PDF of FM11.

  When they are imported into RH10, Cross referees appear as blue text with an underscore (planned). Ctrl-click on the link that is supposed to show the mouse cursor (hand with pointing finger) and a circle with a line through, as shown below.

  

  The html code from one of the link of non-functioing HR cross reference is shown below:

  < class p = "BodyLevel1" > polygon alerts allow the user to define a series

  alerts for a specified region (polygon) in the desired geographic direction

  location. The following paragraphs describe the necessary configuration steps

  Polygon METWATCH alerts. All the features of Metwatch are covered in the < a >

  & quot; METWATCH Mode & quot; < /a >. < /p >

  < / body >

  < / html >

  Conversion of FrameMaker for the cross reference parameters are shown below:

  

  Please help. Thank you.

  I never really worked on the length of path correct max, I just kept shorten until it seemed to work.

  The path "long" ran like this:

  P:\Departments\QA Department\Jonas Conversion Project\doc_projects\Jonas\content\Banquet & Catering\really_long_filename.fm Documentation

  I think the longest 'short' trail is now - P:\Departments\QA Department\doc_projects\content\Banquet & Catering\really_long_filename.fm

  I did it by copying the original files and sticking them in their new locations because I was afraid to disrupt all my internal FM xrefs. Which perhaps not necessary. Because there is another author that accesses files FM, I had to keep it on a network location. If I was a totally solo author, I'd keep the premises in a really short project path.

  It is not the length of the reference itself that is the question (even if it's maybe - I just never knew it), this is the full path to the file is xref refers to. Why? Adobe engineers don't know us mere mortals!

• RT code works since the LabVIEW environment, but not when I create and deploy

  I think there are a lot of reasons why this can happen, but I can't seem to pin one.

  I have a classic controls program that runs on a cRIO. We recently decided to change the communication of a ProfiBus comsoft on Ethernet/IP card. (Industrial Protocol for Allen Renaud automata). For various reasons, we put the fuse in communication in the control loop.

  Now when I run the LabVIEW now, it works fine. I can see data going to and coming from the controller. I can sniff packets and they look good. I get about 30 milliseconds on the loop, which is long, but since I am running in the IDE, I think is not bad. (In other words, I get data in and out every 30 milliseconds).

  When I compile and set the binary on the cRIO, it breaks. I can still sniff packets, but what I'm getting now, is that all traffic to the controller of read requests. My write requests are missing. In addition to reading queries are poorly trained. Rather than ask 43 items in a table, they ask 1.

  A test that I tried was to disable the read request. For the binary file, I don't see any traffic. For the IDE, I see write queries.

  I use LV 2009 SP1. I have the version of NOR-Labs of the Ethernet/IP driver. (We have a request for a quote, but do not have the official driver.) In the meantime, faster I get this done, the happier everyone will be ;-)

  Any suggestions?

  Attention to the nodes of property which is usually my problem when it happens.  Some who say they work in RT do not work in compiled RT

• I try to install photoshop prim. 10. serial No. worked on the disc 1 but not 2. Help!

  I have 3 drives. I installed the one 1 and used my n ° series very well and he agreed. I inserted the disc 2 and tried the exact same serial once again and after several attempts, no nothing. He kept saying invalid. I went on my account for literally copy and paste my account number in the box and it still would not accept. After that, I am confused and don't know what to do. can someone help me?

  You could try installing by downloading instead of use the disks.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 10:

  l http://prodesigntools.com/Photoshop-Elements-10-Direct-Download-Links-PSE-Premiere-pre.htm

• Interactive buttons, working on the Adobe Viewer, but not on the final application

  Hello world

  I had a lot of problems with interactive buttons:

  I made buttons with link with 'pageTo' and 'getURL' (and the "navto://Article#2" syntax).

  What I already know:

  • When you use the "navto" syntax, the first page is 0 (and not the 1 page);

  • I double check spelling of the Article and that's okay.

  the problem is that when I test the application with the Adobe Viewer on my iPad these links work well, but when I create the app and I test on my iPad .ipa file these links no longer work.

  I work on Mac.

  someone has an idea?

  Thank you very much!

  It is a known problem with the simple editing applications. Do not submit this app to

  Apple and keep an eye on things here for an announcement on a fix.

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Hi, I am not able to execute the procedure using dblink in PLSql block. Although he works outside the end of the beginning. Please suggest solution

  Hello

  I'm not able to execute the procedure using dblink in PLSql block.

  Although he works outside the end of the beginning.

  Please suggest solution

  Hello

  Thanks everone for your contributions,

  As well as the permissions, I used to run inside the PL sql block, which was not necessary, we can simply call the procedure using dblink.

  Thanks guys,.

• How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  dannyb76251437 wrote:

  How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?

  Note that you can work with two screens and drag and drop the image to display on the other window.

  I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.

  See:

  Panels and bins in Photoshop Elements

  My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.

  Set your preferences in the Edit menu to "allow the floating windows in expert mode.

  Use the "tab" on the keyboard key to hide or show your panels and tools quickly.

  Find out how to hide the photo tray.

• Will be CC allowed to work outside the country of origin?

  I am a photographer who often works outside the country.  If I'm forced to use this creative cloud licenses, it will be a problem, try to activate again if I am out of the country, in that it was initially activated?  In addition, he reactivate if I'm in a country that is not supported by creative cloud?

  I use a number of other licenses based cloud services and this has been a real problem for me.

  Hi there, what we have heard you should be able to travel with your membership creative cloud without problems.