Aspire 5920-6423 Boot loops before reaching the POST

Similar Questions

• HELP-my x120e is stuck in a boot loop - without reach the bios logo

  Hello world

  I hope to explain clearly what is my (BIG) problem with my x120e.

  Yesterday, I noticed a strange behavior on my bios. I tried to make some changes for example. Switching fn with ctrl key, which allows the charger usb, or AMD - V technology. With f10, I saved and restarted the computer. CTRL-FN keys has not changed. I went into the bios and I saw that nothing has been recorded. I repeated the process, without success. Without stops could be made. As I turned off the computer.

  After a few minutes, I wanted to turn on the computer, but here's the big problem. The computer does not start. After pressing the power button / computer starts (I hear the fan noise and light on the green power button) but, after 6 seconds, without reach the bios logo, it restarts and it will indefinitely until I stopped him keep the power button.

  What I tried after searching the forums was:

  1. remove the battery, keeping the power for 60 years (and 30) button pressed seconds. Re-connect battery. NOTHING

  2. I removed the system memory, put back them. You try to start. NOTHING

  The netbook is 1 month old. It's very frustrating.

  Can someone help me with this? I live in Albania, no here Lenovo support center.

  Thanks to all those who can help you.

  abvasili

  
  

• Crawl song fade out before reaching the top of the screen

  Dear all,

  I would like the title of my working capital to continue rolling but I want it to fade out until it reaches the top of the screen.  It seems that I can do it quite easily in Final Cut Pro, but maybe I'm wrong.  In other words, the full title keeps rolling until the end, but vanishes each lines up before reaching the top of the screen and roll out of sight.  Any suggestions?  Work in Premiere Pro CC 2014 on a Mac.  Thank you.

  Add a linear wipe with a border of feathers for the title of working capital.

• T520 keeps restarting before reaching the home screen of the BIOS

  Hello

  has obtained a T520 here (nVidia GPU) that reboots constantly and never reaches the home screen of the BIOS:

  -power LED button turns green

  -fan turns and optical drive is accessible

  -fan, the LED shuts off

  -pause of about a second and the whole sequence starts again

  This happens with the power supply and a battery. HARD drive is deleted.

  I already seconded the optical drive and the BIOS battery.

  Any other ideas? Would it be the result of a BIOS update failed? Or a few screws - up variables UEFI?

  Is there a procedure for recovery of crisis for the T520 update the BIOS for the boot block?

  Kind regards

  jal2

  I have reflashed the BIOS area in the SPI flash (offset 0 x 500000, length 0 x 300000) and the error disappeared!

  BIOS version is 1.42, the source for the binary file was the. FL1 updated Win7 Lenovo BIOS file (same offset as shown above).

  The only problem was that the SPI flash came with WSON package, so I could not use the clip Ponoma and had to solder wires.

  See you soon,.

  jal2

• Delay loop before stopping the while loop

  Hi all

  I modified this code to the example in the forum. I forgot what thread. The file name is "control.vi of loop speed.

  I want to measure pressure and compare with the pressure of the target. Once the pressure reading is higher than the pressure of the target, I want the output high for 5 seconds and turn it down.

  When he goes back to the bass, I want the to exit the loop, or when I pressed the stop button. I don't know how to do it. Help, please.

  Thank you

  I can't view your VI (I use LV 2014). Please see my attachment for an example. See what happens when you make the numerical value > = 1. Enable execution of mark if she makes no sense.

• Automatic scrolling of the list of favorites on the start menu to stop before you reach the bottom

  I open the start menu, point the mouse on the Favorites bar and keep the cursor under the small arrow pointing down at the bottom of the list of favorites, as well as the list of bookmarks automatically scrolls down. But after scroll down a number of bookmarks, automatic scrolling stops before reaching the bottom of the list of favorites, view the rest of the empty list. I removed a lot of unnecessary bookmarks in the Favorites folder in Documents and Settings, but this does not resolve the issue. I would like suggestions for this problem, which I have not come across so far. I ran CHKDSK disk cleanup and defragged the volume of disk hard, but in vain. I have Windows XP Pro SP 3 with IE8 installed on my computer.

  THIS POST has BEEN contrary to the ETHICS of COPY AND published by www.qnundrum.com on its website. I don't know how to report this error to Microsoft. Anyone can report to Microsoft?

  Hi ErhanKarabekir,

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Thank you.

• T620 WES8 Image Capture failure/Boot Loop

  -t620 Quad Core

  -WES8 x 64

  -13WWDTBM602 #SABA #DABA

  -BIOS: L40 v2.05

  ------------------

  Tried an initial capture before making changes.  First capture failed quickly with a network card driver error - I've updated HPDM 4.6 SP1 and was able to continue beyond this error.

  Any following capture attempts result in a loop to initialize uneding.  The workstation creates a new boot option, "winpe [EMS ENABLED]", which he defines as a default value, which continually, it loads and restarts.  I have run this process for more than an hour before canceling the task.  All subsequent attempts create a new boot option or additional "winpe" with the same behavior.  I've updated the BIOS at this stage no change.

  I also found that I am unable to the hell UWF until the administrator is to go to the taskbar or the HP unified write filtering via the control panel Configuration.  The lock is green and indicates the GUI of Configuration UWF UWF is activated but the new shortcuts office and downloads are left in place after the reboot.  Event viewer shows "event ID 1007:"unified write filter is not disabled, code 196608 output. "  The system does not have the specified path.  "I also tried to disable UWF using HPDM but received 14007032, write error filter.

  Write research through the Configuration of the filter, I found that there is NO file/folder exclusion, considering that the TC I just shot of the multiple box including bootstat.dat and agent_persist.dat.

  So... do I have a lemon here or what?  I have an another t620 that I confirmed I can disable UWF without any problems but I have not tried image but as I am a little worried about the boot loop and create the same problems that I saw with the original.  I'd be more comfortable if I could find a factory image HP download, but there is none available on the drivers & software page.  Can somene HP direct me to a factory WES8 x 64 image?

  Thank you

  ZP.

  We have completely uninstalled HDPM and reinstalled 4.6 with a new database and imagery with success the t610 older.  Then we have updated to 4.6 SP1 and we were able to successfully image the t620.

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.

• iPhone 5 stuck in boot loop

  Hey everybody, I recently encountered a problem where I replaced one of my friend 5 iPhone battery and when I plugged it in to charge that he was stuck in a boot loop cycle. The Apple logo appear and disappear over and over again and never start.  I then read a lot of forums where people have had the same problem and tried a lot of things.  I even tried to put several other types of accumulators in the farm of origin, including, and none of them would allow the phone to initialize.

  I solved this problem by putting the iPhone in recovery mode where then iTunes could recognize.  I then did the update (not recovery) that was available, because do not get rid of all the data on the phone.

  I got a weird error that doesn't seem the case on internet "iTunes unable to connect to the iPhone. The value is missing.

  

  But the update worked!  Then I later discovered that my friend tried to update his phone when he died (battery was flakey, so why I replaced it).

  So if someone has ever an update failed and an iPhone stuck in a boot loop, just put in recovery mode and update the firmware from iTunes.

• My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  original title: I have the same problem posted by Don Gagen on 16 April. My computer is stuck in a boot loop indefinitely after downloading the Vista updates.

  I installed some updates Vista Home Basic important for my laptop on Wednesday, and since then, my computer won't start. I get to the first page of Windows that shows "Configuration updates 0% complete" for about 15 seconds and then restart the machine. This loop continues indefinitely. I spoke to the manufacturer (Dell) who say there have been some recent problems with the update service, and I have to pay (£69) to address this problem. I don't really want to pay for a repair, when the problem does not seem to have been caused by me or my computer. I tried all the options from the start menu, but there seems to be no way to solve this problem, for example, in 'Safe' Mode, the problem persists, and 'Last successful login' does not work either. It will not launch command prompt. I ran Dell diagnostic check before extended initialization and there seems to be nothing wrong with the hardware. I have no disks system of re - install Vista (and that I would lose all my data anyway). I can also access the ID of the license of Vista. The computer is no longer under warranty, and I have no agreement to support hardware or software for it.

  I would be grateful for any suggestion.

  Alan

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Nc6400 entered the restoration infinite boot loop

  Hello

  a friend gave me a NC6400 to format and install w7 Ultimate SP1 x 64.

  I know that this model does not support W7 (not), but I managed to find a solution to this.

  The problem is that after the installation of any windows update, he's going directly loop start of restoration and it will not solve the problem.

  Safe mode doesn't work at all (same thing)

  I already reinstalled w7 like 5 times. All is well until I install the updates.

  Even if I only install the language pack to win put to day and nothing more that it will be the same result.

  On first installation, I noticed that the problem was the registry.

  On my last attempt the fundamental problem was the driver of 3d drive guard. That been said, I can't connect to uninstall so I can fix it.

  I checked for defects of material and everything seems ok.

  Before the last accepts it matches the installation I used Disk Sanitizer from the BIOS in order to have a HARD drive completely clean.

  Any suggestions will be appreciated!

  Best regards

  Miltos has.

  Hello:

  I think the problem is with W7 Ultimate only.

  And Yes, the nc6400 will work 100% using combinations of drivers from the support pages and pilot nc6400 and 6910p (there's some W7 drivers and software on the 6910p page that work the nc6400).

  See this related post... it's for desktop PCs, but the problem is probably the same...

  My W7 Ultimate dc7800 having done the same thing as yours... Infinite boot loop.

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/DC5800-Win7-x64-and-problem-with-restart/m-p/6173175#M95369

  My solution was easier... I installed W7 Pro and had no problem later.

  I can tell you that W7 Pro x 64 works 100% fine on a nc6400 because I had one and this OS is installed.

• I can't navigate the menus (for example, bookmarks), drop-down as they disappear before that my cursor reaches the point that I want to

  This is a similar case for context menus (like the menu that asks if I want a souvenir of the password): the dialog box disappears before I can reach him. And no, I'm not click elsewhere on the screen.

  I have recently installed Windows 10, and I have not noticed this problem before. The problem still exists when I run Firefox in safe mode.

  Any help you can give would be greatly appreciated!

  Thanks for the reply cor - el.

  This suggestion has not solved the problem, but it turned out that it wasn't a problem for Firefox in itself; I had a more general problem with my touchpad, which was solved by uninstalling and reinstalling the pointer. In any case thank you for taking the time to answer!

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on. STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  Original title: Stop: 0 x 05001210

  On a Toshiba Portege M700 with Windows XP, I get a BSOD with the following:

  STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  There is no further information on what happened, it just says: a problem has been detected and windows has shut down to prevent damage to your computer.

  I don't know any specs on the system (processor, memory, ect) I was given this laptop from edge of my guy on the ground.  I searched and I can't find any info on this Stop error message.  It was not a new hardware or software installed on the laptop recently, other than a possible update of Windows, I'm not sure.

  Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on.  I tried the Safe Mode, Mode safe mode with network and command prompt.  Each instance you get to the log in window, but when after entering my info and loggging stop immediately with the same BSOD.  I also tried the last good Config known with no luck.

  Also, the hard drive is encrypted so I can just shoot and get a backup of it before you try to reinstall the operating system.  I have not tried to repair windows, yet, I'm waiting to try other solutions if they are there.

  If anyone can point me in the right direction I would really appreciate it.  If you need any other information, just ask and I'll give you everything I can.

  Hello Jordan,.

  Have you been able to get into the recovery console?

  If so, I would recommend running the CHKDSK command of it followed by the Enter key:

  CHKDSK C:/P

  Let us know.

  Best regards

  Matthew_Ha

• Can I attend Design UCS before you reach the PCV?

  Hi people,

  Can I follow the course of Design of the UCS before you get the PCV? I will reach the PCV later, and I don't mind to have the certificate of the UCS later.

  Kind regards

  Ismail

  You need not reach your VCP first.  The requistes just need to be met for certification should be granted.

  Robert