Aspire MP3800 overheats during games and stop of monitor only downwards

Hello. Recently, our office has begun closing the screen while playing games (especially the new graphic high through Steam or even Facebook). The system itself seems to remain on (only stops the screen itself) but you'll have to retart everything to get it to turn back the computer. I ran one of these programs to monitor (CPUID HWMonitor) and showed some temperatures increased enough high immediately after I restarted and checked. For example the CPUID, the TMPIN0 varied from 51degreesC to 65, while the Core #0 (under Intel Core 2 Quad Q8300) varied from 36 c (current) to 56 C.

I am not that savvy with terms, but the fan in the middle of the PC's.

Note: Recently it was not all games, but it will turn off the monitor shortly after I restarted the computer. There are also the odd occaiosn where he first close the monitor and then decides to restart the PC itself.)

All of the suggestions. (Because I had problems with the monitor, I recently deleted the grahics drivers and reinstalled, but it made no difference).

If the moniter does not work as it uses both for a new

Tags: Acer Desktops

Similar Questions

  • _ "Boot Performance Monitoring" and "stop Performance Monitoring. __

    I just looked to the top of the page "Event Viewer" and discovered 1 791 itemsmarked as 'endangered', 'Critical', 'Error', etc, etc, etc.!
    They seem to be linked to "Boot Performance Monitoring" and "Stop Performance Monitoring", etc., etc., etc..!
    How can I fix all of these issues, please?
    I have a little trouble with my home computer private.
    Whenever I turn on my PC, it takes a long time to start (is that what you call "Booting"?).
    Also, when I want to turn my PC off, it takes a long time to close.
    I tried a few computer maintenance such as: -.
    CLEANING DISC,
    THE FRAGMENTATION OF THE DISK,
    etc.,.
    but they have not alleviated the problems at all.
    Can someone help me with this please?
    Any assistance, information, suggestions, etc. would be greatly appreciated.
    Thanks !

    Alan Merrington
    E-mail address is removed from the privacy *.

    Hello

    Normally how long will it take to start a power off of the State? How long does take for
    Stop for a shutdown of the State?

    Use this simple free utility to read these events and it makes it easier to paste them into one
    message here. Do these after the SFC and CheckDisk as below.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ==========================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================================

    Keep these practice to check possible error messages if they return.

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP)

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • hs_err_pid3840.txt error is displayed when you log in minecraft (a game) and stops, how do I fix?

    While I started the newspaper in minecraft it black screens and stops off the coast, I tried the following to correct this situation.

    -Removed .minecraft
    -Removed and reinstalled java
    -Deleted files that could in fact this problem
    And I remember what happened right after that I downloaded javaFX 2.1.1

    Hi, the ARchers,

    Here are the logs generated by the games crash

    It's a question of java

    Contact the Center to the game support or bugs.sun.com

    http://bugs.Sun.com/bugdatabase/view_bug.do?bug_id=7042429

    They are safe to remove from the desktop computer

    Update graphics drivers

  • Satellite A200-1FL: cooler starts and stops every minute only with battery

    Hello.

    I just bought an A200-1FL and I test these days. I noticed that the cooler starts and stops every minute about when I use it only with the battery.

    Disconnected from the power, even if I do not have too much, just browse the Internet. Is this normal?

    If I work with trendy food, the cooler makes no noise.

    Thank you.

    David

    Hello David

    Do you also have it tested with different profiles in power options (balanced, power saver, high performance)?

  • Satellite A660 crashes during games and recovery

    I have problem with my Toshiba Satellite A660. Sometimes when I play it freezes and I can't even move the pointer that all freeze them then I have to stop with force.
    Once it freezes during a restore and that what do me worried about would be a secondary problem (amount of money).
    I tried to take it to one that he calls himself a Toshiba service company and they told me that the problem is solved, but he didn't.

    So I hope that everything would be help me I m in a bad situation here.

    Hello

    I understand your situation but to be honest, I put t know how to help you.
    I put t know what that solved the service and what they did with your laptop, but what you can do is to install the OS by using the recovery image (on DVD or HARD drive) and to monitor closely what will happen in the future.

    While gaming, don't forget your laptop is placed on the desk and the cooling fans should not be stuck with a few Pater, books or anything else. before you start the game go portable high performance power plan and check that cooling in this plan of the power method is set to the maximum level.

  • Dell inspiron 5559 overheating where the game and stop

    Hello

    I have a new dell inspiron 5559 I bought two weeks ago, I got a problem with the fan that was really very strong without any reason and after doing that for a few days, the laptop began to close when the games due to overheating.

    I sent it to the laboratory because it is guaranteed and they replaced the fan and the heatsink.

    After I recived it I want to play the game I played last mounth - AP 17 eating and it stops again.

    I ran some tests and found that when the AMD GPU's on is declaring temp will immediately with a straight line from 0C to 50 ° C, which is not normal, I think. It also stops while I conducted the test of stress A GPU.

    All my drivers are later, so I think the problem could be with the thermo sensor or thermal paste they applied in the laboratory.

    Ok. Then then it should go back to the center of repair by the previous technician. Or pay to have somebody do it locally.

  • My computer is running hot whenever I play a game and stops

    When I play a game on the computer as Witcher2, the computer runs hot and then stops when I turn on it shows he got hot at 90 degrees. Can I do to prevent that from happening. Thanks for any help.

    Open your computer case and check that the fans are running when your computer is powered - in particular the fan on the processor on the motherboard.  If the fans are working properly, then get a can of compressed air and blow out the dust from the inside of the computer - especially around the CPU chip.  Dust can collect on components and act like a blanket that is causing the overheating of the computer.

    HTH,
    JW

  • the computer keeps going into hibernation... How can I get the monitor turns on and stop reading "monitor is asleep."

    The monitor lights. It reads monitor is asleep. Sometimes if I'm patient enough for the computer to turn on and off the screen lights up and indicates that the computer has been hard to get out of hibernation. How can I disable hibernation?

    Hello melissacrowley,

    1. you have the latest drivers installed for the graphics card on your computer?

    I suggest that you update the drivers for the graphics card and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Thank you
    Irfan H, Engineer Support Microsoft Answers.

  • Satellite A500-026 overheats and stops during the game

    Hey guys, any help would be appreciated.

    My 026 has recently started to overheat and stopping at random during video games. I can't even run TF2 to learn more, then one hour unless he suddenly died on me. It is never used for this months of use.

    I can assume there is a problem with my video card. I tried to download drivers to Toshibas site and the latest versions of Nvidia without change. I've already booked a Mobilecare service, I wanted to just evaluate what might be the possible problems.

    Hello

    Maybe this problem of high temperature of s.
    High temperature causes a closing down in order to protect the equipment against damage.
    But the question is why the temperature increases to critical level?
    One of the reasons could be a page nvidia graphics card driver. Such driver does contain protection against overheating. Therefore, use the driver of Toshiba page.
    I see that you did
    Well, the laptop seems to be a new a .so usually dust should not be a problem and fans should work properly

    A tip; Please make sure that you have enough free space around the laptop to ensure good air circulation.

    However, I recommend asking an ASP in your country for verification may be what he s hardware related issue.

  • during the game Dungeon Siege Broken World, it stops the game and I get the exception error

    Original title: exception errors

    during the game Dungeon Siege Broken World, it stops the game and I get the error of the exception that the program brings together except for the tour program off that I have to start

    Hi irishlaird,

    1. What is the full error message that you receive?

    2. did you of recent changes on the computer?

    Check out the links and try the steps mentioned below.

    http://garage.gaspowered.com/?q=node/9419

    http://garage.gaspowered.com/?q=node/6386

    http://garage.gaspowered.com/?q=node/5573

    http://garage.gaspowered.com/?q=node/5357

    If the previous step fails, then validate your request on the website of the game provider.

    http://garage.gaspowered.com/?q=Forum/169

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • iMac 27 inch overheats and stops

    27-inch iMac processor intel core duo two overheats and stops, what is the best way to clean the dust to cool properly?

    Remove the RAM cover and vacuum any dust. Do NOT blow air into the opening!

    Are you sure that it is overheating, if that's why need you!

  • Fan gave up and Satellite A100-999 overheats and stops

    Hello

    I have a Satellite 3 + year but unfortunately gave up the fan and it overheats and stops.

    I know it is old and has been well used, but he has been a faithful servant and I want to know if I can get the fan replaced?

    It's really a phone beautiful, and if I can save it I would.

    Thanks for your help.

    Hello

    Of course, the cooling modules can be replaced.

    According to your message, you are not familiar with these things one so you should get in touch with a local ASP (authorized service provider) who could order a cooling right and compatible module and could replace it.
    In addition the new thermal grease which is placed between the CPU and cooling modules must be added and renewed.

    Welcome them

  • I'll be in the middle of something like a game, and then it stops. I think it's because of a firewall that I just installed.

    I'll be in the middle of something and stops, as a game that I played... why he did this?  I didn't have this problem until today, when I downloaded 'firewall' from comodo... How can I fix?  Thank you for your help...

    Original title: network Ethernet NIC network adapter wireless network device

    original title: loss of internet connection?

    Hello

    1. you receive an error message?

    2. are you using the cable or wireless Internet connection?

    3. what operating system is installed on your computer?

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    4. are you using Internet Explorer? If Yes, what version of Internet Explorer you are running on your computer?

    Find out what version of Internet Explorer you are using

    Running over a firewall can cause conflicts between them, I suggest you to disable or uninstall comodo firewall and turn on the Windows Firewall and then check.

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    See also:

    Introduction to security and computer security

    http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safer-computing

    Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

    Firewall: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  • the gme and NEXON combat arms was not letting me use the wasd keys to control. so I left the game, and when I stopped I had a noticce that says error code 21

    original title: Devicewhat is the error code 21

    I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?

    Hello

    We really need more information - ask in the games and/or Windows Forums for your
    version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    You can also check your version of Windows, then good topic Windows: games.

    It is a question where you may need to actually test in several forums.

    Don't forget to check the known issues with the support from the game and forums, but also any device
    in question.

    -------------------------------------------

    Reboot to see if the problem comes back.

    Here are the general meaning.

    21

    Windows removes this device. (Code 21)

    Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Network slows down and stops receiving data the halfway during the loading of a site or downloading

    In windows 7, my network slows down and stops at the midway during the download or load of a site with the largest size. When I restart the download, the same problem occurs again. When I use a download manager I have to stop the download and then picks up the part were stopping to download and vice versa in order to finish the rest of the download to complete. This problem is only with windows 7 and windows 7 sp 1.

    Hello

    ·         Did you follow all the methods provided?

    ·         You are using cable or wireless network connection?

    Let us know if you have followed all the steps of troubleshooting mentioned in the previous post, and what were the results, so that we can help you further.

    If you use try of connection through check wireless network and wired network. If a cable that you can try to use a new cable to see if the one you use has problems. If it is I'd see if anyone is leeches wireless turn off your connection. Note If you have more than 1 person on a 300kps connection there is no chance, you're going to both to have that kind of speed with a shared connection, especially if you use a hub, although I do not agree that a decline until 20kps is rare, it would not if someone is hogging the bandwidth of your connection.

    Method 1:

    You can also try to update the latest NIC drivers on the manufacturer's Web site and check if it helps.

    Reference:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    Method 2:

    Try to release and renew the IP address, and check if this may help. To release and renew your IP address follow these steps:

    a. open windows command prompt

    b. Click Start - Run-type cmd and press enter

    c. to release your ip address ipconfig/release , press Enter

    d. to renew your ipconfig/renew IP address

Maybe you are looking for

  • eprinting impossible if printer standby

    Printer (HP Deskjet 3520) is connected to the network, but users cannot access if the computer is not turned on. Thanks for your help.

  • A Wi - Fi connection does not work. Does not recognize Fn + F8

    Trying to help my boss with a problem that seems to have his laptop. His computer could not get along with wifi. Does not yet recognize her here. I did some research and tried to install the new drivers and flash cards causes the Fn + F8 button does

  • Fails to print full page

    I have a phtosmart C4580 all-in-one printer, which fails to print an entire page, if you use it to computer windows laptop with a Wi - Fi connection 8. When running HP Print and Scan Doctor always rises not all complete software installed, download t

  • Como puedo get the clave COA para realize downgrade from Windows 8 one of Windows 7 32 bit

    Buenas tardes: The empresa in the trabajo ha comprado una 86 computers HP EliteDesk 800 G1 SFF, las which amount han venido con license OEM Windows 8 64-bit y con Windows 7 32-bit media. El problema radIca in Los sistemas y applications than utilizam

  • Installing the printer without a disk

    My HP Officejet 6310 all-in-one worked very well, has been about 4-5 years now.  However, I still had a few messages about Document Viewer whenever I turned on my computer.  I would always go to the Task Manager and get rid of it.  Recently, I read t