I'll be in the middle of something like a game, and then it stops. I think it's because of a firewall that I just installed.
I'll be in the middle of something and stops, as a game that I played... why he did this? I didn't have this problem until today, when I downloaded 'firewall' from comodo... How can I fix? Thank you for your help...
Original title: network Ethernet NIC network adapter wireless network device
original title: loss of internet connection?
Hello
1. you receive an error message?
2. are you using the cable or wireless Internet connection?
3. what operating system is installed on your computer?
What version of the operating system Windows am I running?
4. are you using Internet Explorer? If Yes, what version of Internet Explorer you are running on your computer?
Find out what version of Internet Explorer you are using
Running over a firewall can cause conflicts between them, I suggest you to disable or uninstall comodo firewall and turn on the Windows Firewall and then check.
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
See also:
Introduction to security and computer security
http://Windows.Microsoft.com/en-us/Windows7/understanding-security-and-safer-computing
Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall
Firewall: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions
Tags: Windows
Similar Questions
-
my phone (samsung RV410-T01) stop automatically. I removed the battery when I was with her. and then it stopped and I can't open it with a battery or even I plug.
Hello
It is definitely a hardware problem so check with a real computer store (who makes his)
own service workshop on Samsung) or the Samsung Support.
Samsung - Support - click on the link of 'Laptop' under 'Office '.
http://www.Samsung.com/us/support/main/supportMain.doSamsung - visit your country Site
http://www.Samsung.com/us/common/visitcountrysite.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Why my screensaver pop up continuously when I am in the middle of something and if I click on new in the program fast enough, I have to reconnect. It gets really annoying. Help, please.
I tried the 'clean boot' thing, but it did not help. I continued to explore all the options I could think & I think I finally got. I might be a little embarrassed of it's a simple thing, it turned out, if I considered myself more ' compatible computer, but I "don ' t... so I'm not." In any case, just to let you know, because I appreciate you taking the time to help me, this is the 'waiting time' & 'on RESUME, display logon screen"in the"settings screen saver box. I had fixed in 1 min. & I had the "on RESUME" box checked. I've been playing with it a few days when I was changing my "background theme". Anyway, thanks a lot for taking the time :)
-
Running Windows 7 Home and Office on a laptop computer brand new and am startint to get the blue screen often enough so that in the middle of something.
The screen came back 1 or 2 times, but usually, I restart and hope the laptop comes back to life at this time.
Had he come back and tell me that Windows Outlook does not close properly and that he wants me to reinstall the program.
This laptop is only a month and a half, am also under Norotn 2010, on this, the protection against viruses.
Thoughts or ideas for me?
Thank you.
As the laptop is barely a month old and a 1/2, it is under warranty.
Communicate with the computer laptop manufacturer A.S.A.P. and make a claim.
Make a claim because it may be the precursor of future problems with your laptop and you want this connected with the manufacturer.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For problems with Outlook:
http://answers.Microsoft.com/en-us/Office/ee861097.aspx
Outlook Help Forums at the link above.
They will help you with your Outlook questions when repost you in the Office Forums above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers. How can you bypass those to change your settings?
You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(140233) -
All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.
Hello
Greetings!
Close to Lightroom.
Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)And delete the file previews.lrdata.
Note: do not delete the catalog with the extension .lrcat file.
Concerning
Jitendra
-
Can you run the Interface of Inspection VBAI only once and then once more by a guest user?
Can you run the Interface of Inspection VBAI only once and then once more by a guest user?
I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).
Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?
-
Usually when playing games, DOTA 2 and Battlefield 3, I get them more when im playing battlefield 3.
Hello
Don't forget to check with the support of game manufacturers and ask in their forums to see if there is
known problems.---------------------------------------------------------------------------------------
Results verified BlueScreenView WinDBG / DumpCHK.
The Bug_Check have been in 0a, 1A, 7, 50 and.When there is that much material different from Bug_Check is almost always involved
at least some of the issues.
1. remove ALL power and then reinstall memory cards and cables (at both ends, where possible).
in fact, remove and replace - don't do not just tight. Clean the dust bunnies and ensure that fans
work. Try adding a small fan blowing into the socket to reduce the effects of heat (heat
related not always means excessive heat that something might be too sensitive to the same
normal levels).2. test the memory carefully using methods in the troubleshooters below. Keep in mind
This memory tests only detect all errors as the moment where there are tiny speed differences
between the modules that appear to be identical. It is necessary to test the modules in
various combinations and models.3 several of the Bug_Check showed CAUSE nvlddmkm.sys who, in the Nvidia video driver.
Search for Nvidia updates. See the driver update methods in the resolution of the problems previously posted
above.NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
http://www.nvidia.com/download/index.aspx?lang=en-usNVIDIA Support - check with the support that she might be a known issue
http://www.nvidia.com/page/support.htmlNVIDIA forums - also check for the forums it might be a known issue or others likely to have
http://forums.nvidia.com/4 check system Maker (manufacturer of motherboard for customized systems) updates to the BIOS,
chipset drivers low level and major of edge and separate device drivers. Use DriverView
-Microsoft drivers hide the value VIEW - updated those without emptying in their names. (See pilot
methods of update in convenience stores previously posted.)5. after updating the drivers run DriverVerifier as shown in the troubleshooter below.
6 use other methods of troubleshooting in convenience stores posted previously and those
below as needed.===========================================================
BCCode: 0a 0x0000000A methods as well as updates to driver and memory tests
are in the resolution of the problems previously shown.===========================================================
BCCode: 1a 0x0000001a
in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
sound or other system functions that it these get hot. Try adding a small fan blowing in
the vents as a test. (These are especially for a PC not a laptop.)Have you recently added any hardware? Have you updated any drivers just before this started?
(Check control panel - updates of Windows to see if all drivers have been updated it on the)
This started the time) likely guilty hand are video driver, other great drivers, memory, and
antivirus/antispyware/security products could be at fault as well as reader questions.Use the troubleshooter below and refer to the following message to drivers and memory when
you get these sections and then back to the resolution of the problems according to the needs.BCCode: 1a 0x0000001a<-- read="" this="">-->
http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes===============================================================
BCCode: 7F 0x00000007E who is also a 0x1000007E
See these KB articles:
"Stop 0x0000007E" or "Stop 0 x 00000050" error message in Windows 7 or Windows Server
2008 R2
http://support.Microsoft.com/kb/979538"Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" error when the GPU is under
conditions of heavy load in Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/983615References to Vista also apply to Windows 7.
BCCode: 7F 0x0000007E which is also 0x1000007E
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-===============================================================
BCCode: 50 0 x 00000050
References to Vista also apply to Windows 7.
Have you recently added any hardware? Have you updated any drivers just before this started? (Check
Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
products could be at fault as well as reader questions.Use the troubleshooter below and refer to the following message to drivers and memory when you get to
These sections and then back to the resolution of the problems according to the needs.BCCode: 50 0 x 00000050
Cause
The BCCode 50 usually occurs after the installation of faulty hardware, or in case of failure
hardware installed (usually associated with a faulty RAM, be it the main memory, L2 RAM cache memory, or)
Video RAM).Another common cause is a defective system service installation.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
Solve the problem
Solve a defective hardware problem: If the material has been added to the system recently,
Remove to see if the error recurs. If existing hardware has failed, remove or replace
the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
For more information about these procedures, see the manual of your computer.Fix a defective system service: Disable the service and confirm that this
resolves the error. If so, contact the manufacturer of the service on a possible system
Update. If the error occurs during the system startup, restart your computer, and press F8 to
character mode menu that displays the choice of operating system. As a result
Windows Advanced Options, select last good known Configuration option menu.
This option is most effective when a pilot or a service is added at a time.Solve a problem of antivirus software: Disable the program and confirm that this fixes
the error. If this is the case, contact the manufacturer of the program about a possible update.Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk
errors. You must reboot the system before the start of the analysis of disk on a system partition. If
the hard drive is SCSI, check for problems between the SCSI controller and the disk.Finally, check the system log in Event Viewer for additional error messages that might help
identify the device or driver that generated the error. Disable the cache in memory of the BIOS
could also resolve it.
BCCode: 50 0 x 00000050<-- read="" this="">-->
* 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-===============================================================
BCCode: OF 0x000000DE
This is usually a driver issue then run DriverVerifier and check the drivers using the methods
in troubleshooting below. Carefully check the memory using the methods below.BCCode: OF 0x000000DE
Bug Check 0xDE: POOL_CORRUPTION_IN_FILE_AREA
Bug POOL_CORRUPTION_IN_FILE_AREA control has a value of 0x000000DE. This indicates that a driver has corrupted the memory pool that is used to maintain pages to disk.
Important information if you have received a STOP Code
If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
The following actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
POOL_CORRUPTION_IN_FILE_AREA settings
None
Cause
When the memory dereferenced Manager the file, he discovered this type of corruption of memory pool.
BCCode: OF 0x000000DE<-- read="" this="">-->
* 1221.html http://www.faultwire.com/solutions-fatal_error/A-Driver-corrupted-pool-Memory-used-for-Holding-pages-0x000000DE-===================================================
Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617Start - type in the box search-> auditor/Reset hit enter to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
End of 2013 iMac 2.7 GHZ Intel Core 8 GB memory 2nx992F8J2 running OSX El Capitan 10.11.1 SN. Why would I get a message "the application"Safari"is no longer open, and then he won't open? I went online with Fire Fox and I continue to request now if I want Morel Fire Fox my primary. Could they have blocked my Safari? It is difficult to check on it when it won't even developed.
I answer 'Lestoile.
Who are "they".
-
original title: Devicewhat is the error code 21
I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?
Hello
We really need more information - ask in the games and/or Windows Forums for your
version of Windows.Answers - Windows Forums
http://answers.Microsoft.com/en-us/WindowsYou can also check your version of Windows, then good topic Windows: games.
It is a question where you may need to actually test in several forums.
Don't forget to check the known issues with the support from the game and forums, but also any device
in question.-------------------------------------------
Reboot to see if the problem comes back.
Here are the general meaning.
21
Windows removes this device. (Code 21)
Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.
Hello Kenneth Pincus,
You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.
How to create and configure user accounts in Windows XP
http://support.Microsoft.com/kb/279783
How to copy data from a corrupted to a new profile in Windows XP user profile
http://support.Microsoft.com/kb/811151
Let us know the results.
-
My Dell with xp has all the sounds. Sometimes I will leave and then it will come back on. However, not as strong, as it should be. The lights on the speakers are
Try:
- pair an inexpensive connection of headphones in the speaker of your DELL outlet and see if the problem improves.
- connect your Dell speakers to another compatible audio device to verify that the speakers are not defective.
Also visit:Caution:Absolutely no warranty express or implied is delivered with this post. The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message. Entities who follow the advice in this post are at their own risk. -
Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.
Original title: used to install Windows 7
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticAlso check Home Edition free Partition Wizard option "Test of disc surface":
http://www.partitionwizard.com/free-partition-manager.htmlJ W Stuart: http://www.pagestart.com
-
Original title: Xbox 360
I downloaded and purchased the Collection of MW3 Chaos Pack. When I in Chaos mode, it reads"enter multiplayer and launch of the store to buy new content, games and subscriptions Premium Elite. "Help PleaseXBOX 360
Hi Dgkskr24,
The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.
Xbox 360 support
http://support.Xbox.com/en-us/Xbox-360/browse?XR=shellnav
Collections of Modern Warfare 3
I hope this helps.
-
Original title:
Whenever I have shut down my computer, it displays a popup saying to close the background image and then it stops. Should what settings I change so that does not happen?
Hello
1. What is the brand and model of the computer?
2 have you made any changes to the computer, before the show?
Method 1:
Perform a clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.
Method 2:
Change the wallpaper and check.
Maybe you are looking for
-
Upgrade to OS 10.8 10.7.5
For a mac mini with SN: VM817ESXYL4 I 10.7.5 BONE and try to install the mountain lion, but I can't. What could be wrong?
-
Well Yes, I know, they do not recommend with older versions. problem is that this stupid unified message window new versions 100% useless. as in, no need to download and install. So where can I get a version prior to this idiocy?
-
Skype 7.6.0.105 APPCRASH Kernall registration in
Signature of the problem: Problem event name: APPCRASH Application name: Skype.exe Application version: 7.6.0.105 Application timestamp: 559165ab Fault Module name: KERNELBASE.dll Fault Module Version: 6.1.7601.18869 Timestamp of Module error: 556363
-
OS Vista sp 2 IE 8 I just changed my password, log and I can remember? Help!
-
the COA label on my laptop is completely dimmed, so any number can be read. This bar code is correct and what seems to be a code red and blue collor can it be scanned for numbers or y at - it another way