[Aspire One] Tilt screen breaks webcam and USB

Similar Questions

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• Aspire One 522 screen does not

  The monitor left on my netbook (Aspire One 522 Windows 7), the machine works when connected to an external monitor. I tried upgrading the BIOS, but the screen does not always react. Anything else I can try before I get another machine for my trips?

  Thank you

  John

  Hi John:

  I had what seems to be the same problem with the AO722. It unfortunately turns out to be a pause that has developed in the display ribbon cable & camera near the hinge area - it's intermittent at first, but eventually the screen cover works (the problem of the famous black screen that is not fixable with a bios upgrade). I was forced to use either an external monitor or TV hdmi to work with the system until I finally took the laptop part (a royal pita, withdrawal plug-in keyboard was the worst part) and replaced the Ribbon by a piece of Amazon.com. The part number of the tape is marked on the Ribbon connector.

  Right now, I try to avoid opening and closing the lid too to reduce stress on the Ribbon near the hinge area - the Ribbon takes a tortuous path in this hinge - I'm surprised that the original lasted as long as he did. Also, I covered the keyboard of the snap-ins with tape is easier to remove if I have to take off again - hope not! I use black tape to tape actually the upper part of the keyboard on the main body of the computer - not noticeable.

  Jack E/NJ

• Problems with Acer Aspire One A150 Atheros AR5007EG

  Hello, I have an Acer Aspire One A150 with windows XP and my wireless card problems, try to connect. The card is Atheros AR5007EG

  Hello

  get the latest XP drivers for your Acer model

  http://support.Acer.com/us/en/default.aspx

  and here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• My aspire one is powered, but screen remains black and nothing will start.

  My aspire one is powered, but screen remains black and nothing will start.  It works very well.  This morning, it won't work.

  HELP ~ ~ ~

  Thank you.

  Try a power reset the unit. Remove the battery, remove the adapter. then press and hold the power button for 30secs, once done put the battery back in and try it

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

• Acer Aspire One D260 webcam does not

  My grandmother just sent me this little purple Acer Aspire One D260 about two or three weeks and just this week my webcam has stopped working for everything, how can I solve this problem?

  Hi Jordan,.

  1 Windows operating system you are using?

  2 did you recent hardware or changes to the software of the system?

  I suggest you to uninstall and reinstall the drivers for your Acer Aspire 2920 Crystal Eye and check if it helps to get the webcam working.

  Step 1:

  To uninstall the drivers of Webcam and software programs and features, follow the steps below:

  a. Click Start.

  b. in the start search box, type programs and features.

  (c) in the list, click on programs and features.

  d. check the webcam software and uninstall it.

  e. restart the computer.

  Step 2:

  Uninstall the device from Device Manager:

  a. Click Start.

  b. Select Control Panel > system > hardware > Device Manager.

  c. open Device Manager and expand the imaging device.

  d. right-click on the webcam device installed and uninstall the device.

  During the uninstallation of the device, make sure that you place a tick against 'delete the driver for this device '.

  e. restart the computer and install the latest version of the drivers of webcam and check if it works very well.

  You can check with the Acer support and install the latest version of the drivers for the webcam.

  Support of Acer & downloads

  Hope this information is useful.

• Where can I post a problem of Aspire One AO756 USB system recovery?

  Hello.  Where can I post a problem of Aspire One AO756 USB system recovery?  I had a HARD drive crash, replaced the HARD drive and bought a USB (Win 8.1) on the Acer Store system recovery disk.  The USB settles all the installation files and then said to remove the USB key, then click OK to restart.  But the bios can not find a bootable disk to complete construction. I was sent a second USB drive with the same results.  The new HDD Seagate passes each Seatools test.  In addition, I can boot from USB to the DOS or Linux and access the disk without problem. Thank you

  You must use diskpart. in the windows setup program, there is an option to format the partitions manually. allows to delete all partitions, and it will automatically set the MBR or GPT disk.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Aspire One stable 756-987BXrrMFG black screen cursor

  When I opened my Aspire One it says: "Acer Explorer beyond the limits" and then the screen becomes dark gray, if I move the mouse the white arrow appears and moves but that's it. If I leave the computer for a while, the screen goes black if I move the mouse it dark gray turnes again and the arrow.

  If you press CTRL + SHIFT + ESC, left Manager tasks is displayed?

• On the Aspire one D255E-13Ckk and LCD repair

  Dear all,

  I have an Acer Aspire one D255E-13Ckk.

  The LCD is recently being crushed by the members of the family I want to get it fixed.

  However, when I try to ask online and enter the SN or the SNID, it does not pass validation.

  I wonder what's happening and would like to know how to contact support in this case?

  Does anyone have the same experience that could share?

  Thank you.

  I have an Acer D255E I need a new screen for... I bought a new screen nearly a year ago on eBay... it is easy to assemble and no problems.

• How to connect a camera endoscope for an ACER aspire one D255E-notebook via a USB port?

  Hello community, I try to be hot to connect a camera small endoscope to an ACER aspire one D255E-notebook, I can not install a CD of the software on this model of laptop. Can I use the DESIGN MANAGER to install an external camera like this?   THANKS in advanced for any & all of your comments.   P.S. this notebook a starter for windows 7

  You'll need to install the drivers somehow.  If they came on a cd, you can copy it to a USB stick and install from there.

• Acer Aspire One D257-13450 fixed size window too big for the screen

  I have an Acer Aspire One D257-13450 running Windows 7 Starter Edition, and when I open some windows (e.g. Brother MFC 990CW control of scanning parameters), the window is too large to be completely displayed on the screen. The bottom of the window is hidden under the bottom edge of the physical screen.  The window can me moved around the screen as usual but I can't move it to the top of the screen enough to see the bottom of the window - this is where the selection of options for this window buttons. This particular window has only a close button in the upper right and not the usual buttons Minimse or restore down. I have connected a monitor external and also adjusted the screen resolution and nothing doesn't affect the ability to resize the window and get off at the buttons of options I need. I was able to guess the buttons under the edge of the screen by using the tab key to tab through all the options in this window, but it is not very satisfactory. Any suggestions please?

  Many netbooks with Starter have only a 1024 x 600 screen - if the program needs a minimum of 1024 x 768 it may not work or may not display all. But it wouldn't be because of the netbook, Windows.

  You can try this modification to allow higher resolutions:
  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/