Aspire V5 431P F2 is not BIOS and does not start

Similar Questions

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• I have an acer aspire 10 switch that will not start.

  The screen displays a circle with the word reboot but nothing happens how do you reset it? I tried out but he returned with same message is restarted.

  frankubon wrote:

  The screen displays a circle with the word reboot but nothing happens how do you reset it? I tried out but he returned with same message is restarted.

  When you do a normal click of the sthe power button switch goes to sleep rather than turn them off. Try a press and for ten seconds or more, wait a few seconds and try again to turn on.

• Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

  So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

  Update BIOS to the latest version 2.4.0

  In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

  To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

  So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

  It is difficult to find the cause of the problem, because this happens very rarely.

  Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

  When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

  Such computer is out of warranty.

  It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

  No idea what I could troubleshoot?

  Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

  While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

  Desu

  .. .once in a while...

  That will make hard to resolve this situation.

  • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
  • Have you tried another SATA data cable, or reinstall the existing at both ends?
  • Have you reinstall RAM and PCI card in their slots?
  • Have you used canned air to blow out the dust?
  • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
  • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

  If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

  and make sure you have the Office product key too...

• My hard drive crashed and I need to reinstall XP PRO but my computer does not start on the CD

  I went into the BIOS and changed to start from the windows xp pro disk but no matter if I put in the pro or the original disk, I get 'disk read error.  CTRL Alt Del to restart.  BIOS can see how much space is left on the hard drive, so it's there, and BIOS knows I want to boot from the installation disc, but it doesn't.  What I am doing wrong?

  Hi Jade4142.Did try you go to BIOS and set it to the default settings and put the disc in, and then restart. There are many variables to a disc is loading. It could be the Platinum cd/dvd is defective, the disc is dirty, scratched or any black disc market. It you load on the HARD drive that crashed? If so, it could be that the HARD drive is infected? If this is a new HARD disk, you must leave the disconnected HARD drive, start the computer that lights up and looking for a hard drive. In this way the motherboard works independent of the HARD drive. The motherboard doesn't have a HARD drive to boot. Once you start without a HARD disk he won't say you no HARD drive or o/s found. Stop it. Connect the HARD drive for the sake of things a NEW HARD drive. Then start the unit go to BIOS and set to boot from the cd/dvd and then save and reboot. If the disc is genuine, and it's a new HARD drive, it should load without problems. He must ensure that the cd/dvd is above the machine to choose this path.click top and press the sign on your keyboard + and you'll see it move to the top of the list. If she is not at the top is not first in line to start. Just trying to help.

• Bad Bios and laptop does not start

  One day, I tried to run an update of the bios and I now know that I made the biggest mistake by forcing my laptop off while running. It's a sudden reaction when my laptop had seemed frozen. I was reading on the update file/app/what is to have all closed while it performs this update but if tempting as I couldn't move my cursor and I had not yet started the update, just opened. After forcing to close, I cut on and get nothing more than a black screen, no light in the display. Y at - it any way to solve this problem at all? I went to someone about this issue, they said that I might need a new motherboard I want to buy because I just think that I mind as well buy a new laptop instead.

  Acer Aspire One ZA3 netbook
  Windows Vista

  That's all I know of memory and what is on the laptop

  Hello

  The BIOS is for the motherboard.

  And we cannot help you with BIOS problems.

  You will need to contact the manufacturer of your computer; Acer.

  If you put the wrong BIOS you can ruin your motherboard.

  See you soon.

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Satellite A300D (PSAKCE) - BIOS is damaged and does not start

  I formatted computer after when I put update computer BIOS is frozen and it does not work now. File is true where I download from Toshiba Web site.
  I searched Web of Toshiba sites there was not any producere for recovery of the BIOS for the damged BIOS file. Many start-up models with some keys to the BIOS update but mine is not starting any screen only empty key.

  -Can I do it myself? Is there a procedure for Satellite A300D-17F (psakce)? I don't want to wait for the rear service it 6 months before I bought it.
  -If I send to the service, it is under warranty? I don't know any time service can be a problem. They say problem user but I reformatted the PC after I started the update program and they can not understant that sometimes.

  Thank you...

  Hello!

  In this case, you need help from the ASP. You can do anything and it is possible that the ASP BIOS reset.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• BIOS and Windows 64 bit 8.1 does not see rM 8 GB

  Buy Acer E5 - 572G NX. MQ0EL.005.

  It has 4 GB of RAM (Samsung 12800 1600 mhz) then bought a bar - Crucial 4 GB DDR3 PC3 - 12800 CL11 SO - DIMM CT51264BF160BJ.

  Place it in the second slot.

  Result - BIOS shows only 4 GB of RAM and Windows shows same 4 GB RAM (something aroung 3.8 GB)

  Tried to replace the second stick of ram but same result.

  Any ideas what's happening?

  Tried to run laptop with only Crucial working stick - BIOS 4 GB

  Then tried to place again noticed two poles that stick in second slot is not placed correctly (pins were visible), place it with more force, so that the pins are not visible and now it works.

  Once in the BIOS and Windows - 8 GB of RAM.

  Thanks, IronFly.

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• Acer aspire e5 - 571 - Bios and aplications language

  I just bought an acer aspire e5 - 571 in German and I want to change the bios and all the language of the application of English. TI is possible? How can I do?

  try updating the BIOS with the latest version:

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.27_A_A.zip?acerid=635639730549884022&S...

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I broke my Bios and the pc does not start

  I'm a gamer and was thrown my Bios operating system when my pc restarted to power up I have a screen white im course I messed up something in the bios and would like to know if anyone knows a way to fix it so I can put my bios failure to OC'ing {sick eaven slap my hand and say I was wrong to do this}.

  I was reading a forms that said there was a J something pass but my dosent owners manual show it to all...

  If anyone can help me id be full thank you

  Hello

  I suggest you to contact the manufacturer of the motherboard for help on how to reset the bios.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.