Satellite A300D (PSAKCE) - BIOS is damaged and does not start

Similar Questions

• Satellite L650-16w: BIOS 2.40 fan does not start standby mode after

  I have the toshiba Satellite L650-16w
  the version of the bios is 2.40

  I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.

  I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.

  You set the default BIOS?
  Make sure in the BIOS, press F9 and then save the changes by pressing F10.

• My Lightroom is damaged and does not start

  Hi someone can help me. My PC recently had a virus that currupted Lightroom. The virus has been removed, but Lightroom remains corrupted. When I try and open Lightroom, I get a message box that States that another version of Lightroom is open in the background - which is not, and the meesage plans to close the existing version that I can't do. What suggerstions you have to help me fix this. Thanks for your help.

  Try-

  1. use the file Explorer to go to the folder where your catalog exists.

  2 delete a single file that ends with the file extension "" lock ".

  3. restart Lightroom.

  "ATTENTION: do NOT remove the end of file. LRCAT' - this is your master lightroom catalog.

  

• My laptop fell and does not start

  Hello! My compaq presario cq56 bowed down and now won't start. I opened it and checked everything. Hars battery, memory disks. I have replaced everything but nothing. I checked the mem, battery and the drive on my second laptop and it worked. When I connect to the AC, the indicator light is on, but when I push the power button, it does NOTHING. What should I check?

  Unfortunately, it will have to be disassembled and inspected if it is does not start due to a fight with gravity.

  Warranty does not cover damage inducer owner, even if inadvertently.

  You could try to remove the hard drive and then see if the laptop responds to the power button. If the motherboard is OK, the BIOS must meet in showing an error message that says it found no bootable disk (or operating system) found. A fall can make a hard drive unusable.

• 6735 b hangs and does not start on battery

  My 6735 b does not start on battery. Just hangs until I plug in the power supply. For some odd reason, I can't access the drivers even though I have the laptop regestered? Can someone post a link to the update of the bios for me?

  Glenn,

  The server is maybe out of service.  I reported the problem with the web page.  Yours is not the only page not available at the moment - something's up.

  Hang in there and try again later.

  Just for the record, in the case where it is useful:

  Test and calibrate the battery (Windows 8)

  Test and calibrate the battery (Windows 7)

• Error: AVG file is damaged and can not start when tried to start the AVG program

  Original title: Virus of internet surfing

  Surf the Internet today and had a pop up window that says that my PC has a virus and must by a specific virus program to remove. Then, I can't go on the internet or open my AVG program because I get a pop - uo, which says that the AVG file is damaged and cannot be started. Any ideas how to remove it? Tried system restore, but does not open.

  Hi gary125,

  1. don't you get an error message when you connect using Internet Explorer?

  If you get "Internet Explorer cannot display the webpage" then run Microsoft struggling to diagnose the problem. Download the hotfix to a USB drive on another computer and run it on the computer of the problem.
  See you receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage"

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update the BIOS Alienware x 51 does not start

  After the BIOS level and rebooted the system, now it seems changed the configuration of startup and 10 Windows does not start.

  I checked the boot options and saw that one selected is now Legacy of start and it seems that Windows 10 works with UEFI.

  Should what boot option I set by default in the BIOS so that window 10 restarts automatically?

  Any help would be apreciated.

  Hello

  Boot option should be UEFI. Disable secure boot, and then on the Advanced tab > Integrated devices: change SATA AHCI mode.

  If the problem persists, press F9 to return to the default settings.

  Let me know how it goes!

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• Satellite T130-11u with Intel CPU Q300 does not start

  Hello

  I installed a Q300 240 G in my T130 LU.
  It does not start.

  I tried to use the restore disks, everything went well.
  But it's boot after that... it's LAN check while the boot device is set to Q300.

  I tried with a Windows disc.
  It says that the disk is locked and I need to unlock it. (Messages are in French).

  I forgot something?

  Concerning

  Jean-Luc

  Automatic response...

  I managed to get to start.

  I had to put:
  "Exectute-disable bit capability" to [Disabled]
  "Control" mode SATA [compatibility]

  After that, I managed to install the system and start (most important) it.

  Once the system was working, I have reset these entries to the normal configuration without any adverse effect.

  Concerning

  Jean-Luc

• Get beeps when the computer starts and does not start

  Original title: Hello I have Mo Intel DG31PR & 2 GB Transcend RAM while the switch on it give beep 4 times and you would be in this case for several attempts does not start and it begins so please help and what is the problem?

  Nothing more to say

  Pravin Dave

  Hello PravinDave,

  If we get the beep codes and the machine will not move past, then we have hardware problems.

  You will need to contact your hardware manufacturer for more information on the beep codes and their meaning.

  Best regards

  Matthew_Ha

• NB just by making the effort test and does not start backup

  HP dv7-4177 started having types, wouldn't restart. I tried to test that are inbeded and when I did the stress test he stops and does not restart. I hit the power button and nothing happens. I took the hours of battery sevealr and handed over in but I have nothing seems to help.

  Hello Nutn Spec.  I understand that your notebook is currently unable to boot.

  What kind of questions you know before performing the stress test?  This will help me identify the cause of the problem.

  Have you tried to do a hard reset?  It drains all the residual energy of the laptop and hardware reset forces.  If you haven't tried this before I would suggest trying the following.

  1. Make sure that the laptop is completely turned off.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad.

  Let me know the result.  I will keep an eye out for your answer.  Have a great night!

• When I started my computer this morning, it ran chkdsk at startup, windows startup it goes immediately to chkdsk, it will be repeated again and again. I can boot into safe mode, but if I try to start windows normally it runs chkdsk and does not start

  Windows does not start normally, just run chkdsk again and again

  First test the hard drive to make sure it's healthy. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  If the hard drive then passes the physical tests, safe mode:
  Start > run > cmd [Enter]
  fsutil dirty query c: (or the appropriate drive letter) [Enter]

  This will tell you if the disc is dirty or not. Then always in cmd:

  chkntfs /x c: (or the appropriate drive letter) [Enter]

  This tells Windows not not to check this drive at startup. Reboot and it should go on the desktop. Once Windows loaded, run cmd and:

  Chkdsk /f /r c: (or the appropriate drive letter) [Enter]

  CHKDSK will run through all 5 steps. After that it's over, always in cmd:

  fsutil dirty query c: (or the appropriate drive letter) [Enter]

  to see that the dirty bit is not set on this drive.
  MS - MVP - Elephant Boy computers - don't panic!

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• Satellite L500: WLan is de-energized and does not work most of the time

  Hi all, I have a satellite toshiba L500 running windows 7. iprimus have used wireless internet, no problem for a few weeks before that, used it via an ethernet cable as I didnth ave a wireless modem. my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  So I rang toshiba... and they got forced to go in device drivers, cards, and then network and disable, actually uninstall the wireless drivers and then reinstall... and it worked... Finally... (forgot to add with the confusion iprimus someone had reset my passowrd and I had to configure to the laptop...)

  Anyway, after all of these calls, I did a full restore of the computer laptop, all deleted and reinstalled everything and then reinstall the modem. This time in the configuration of the modem, he told me the wireless network adapter was unplugged and let me only implemented via ethernet...

  now earlier today, I had the internet... but he dropped randomly... pages Web will go slow, sometimes it will reconnect, sometimes he used. now I thougbht could try and uninstall and reinstall the modem again, s soul mistake and this time, can not get the wireless at all.

  Ive google to see if others have had this problem... and seeing what others has written, I went into my battery settings and checked the WLAN will not in mode 'sleep', etc., and ive also checked everythings active. Ive no idea what do, or iprimus and Toshiba will give me answers, both companies are just to blame each other lol
  so I have
  It doesn't seem to be my laptop, as all the lights are on modem... and iprimus keep telling me its not record not not with them (disconnects) so my wireless. Although every time my laptop has left internet, so would my iphone of bfs were testing us and so did my other laptop which is partially drunk but couldn't normally always connect to the net... so as to tell me it is a problem of modem... Ive no idea what to do... and can not keep it via ethernet on the bench in the new House ive, as with 2 children less than 3 years moved in, is asking for trouble...

  someone at - it suggestions?
  Thanks in advance
  :)

  > my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  That s the best way to get rid of a client who has a problem, I know that those people who don't say, this is not my problem it problem computer laptop s ;)
  I think that the guys running out of ideas.

  However, first try an update of the WLan driver;
  NEST WLan driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  If new BIOS BIOS update would be available.
  You should also check the advanced settings of the wireless network card.
  To do this, go to Device Manager-> properties-> Advanced tab WLan card.

  Here you can choose some settings that would improve performance

  Good luck

• Satellite A30 was the subject of a cutting and does not start again

  Hello

  In the past two months my Satellite phone has been 'cut' operating environment. It seemed to me that the cooling fans were constantly running at high speed and the air coming out of the (output) rear was warmer then normal.

  I visually inspected the ports of entry at the bottom of the envelope and they do not appear to be blocked by dust or whatever it is. Yesterday, during 'Disc clean-up', he cuts and just wouldn't start again.

  When I try to start the system, the following events happen: first, the "Toshiba" appears as always and then after a few seconds it replaces the logo 'loads Windows' as usual. Then after a few seconds it makes a funny 'click' sound, a blue screen appears for a split second and the system stops again.

  My initial problem could have a overheating? If something has been permanently damaged now?

  I would appreciate any input!

  Hello

  First of all, please give us more details about your model of laptop. It is always important.

  > After a few seconds, he made a funny sound "click", a blue screen appears for a split second
  Looks like a malfunction of the drive HARD and do not overheating what do you think?

  Have you tried to format the whole HARD drive and reinstall the OS from the restore CD? In my eyes, you should first check this possibility.

  But as you probably know nothing is impossible in the word computer laptop and wide. ;) then maybe it s overheating in such a case, the laptop must be professionally checked by a qualified technician.