Aspire v5 - 531P back up to usb

Similar Questions

• Aspire v5 531P touch do not work. Replacing the screen? HLP

  my contact has always been funny. Sometimes, it might stop working and restart and it works again. My cuz fell and the screen cracked... (not bad) and to the touch has worked for more than a few days. now, it has not worked for a year. Can it be fixed with a tip? (I see no driver or driver update... at all) I tried uninstalling the driver and re install but I really don't think I did this right... I'M A NOOB! I get a new screen if I need to... I neeed advice. This can be corrected? If I need a new screen... which will fix my touch? How do I know that it will be? y at - it a test to show that a new screen will make my touch still works?  If I get a new screen... There are a few to choose from... Touch Screen LCD + Digitizer glass + bezel AND do I know all this?

  If a touch screen is cracked, it is never good. A crack is sure to have damaged the resistive layers in the touchscreen.
  You need to replace the screen. Yes it would.
  http://www.eBay.com/ITM/new-Acer-Aspire-V5-531P-V5-571P-laptop-LCD-screen-digitizer-glass-bezel-15-6...

  You must disassemble the laptop. Up to and including the motherboard to replace.

  If the touch screen did not work before it was cracked, he can't fix it.

• Aspire 572 R7 recovery of backup - USB key?

  Hello

  I have to ask for confirmation before I buy the USB to back up my recovery. When I backup Acer it tells me I need an external drive at least 32 GB in order to safeguard memorable.  Here's my question, when we buy these USB drives sold as 32 GB, but doesn't have actually less then this 32 GB of available space, taken into account in the settlement of recovery utility when it ask the 32 GB?  or I have to buy a 64 GB stick just to save recovery?  This seems too and 64 GB stick are not cheap

  Thanks for the help of yor

  You can use a 32 GB flash drive; recovery takes about 18.6 GB, there is a little left unused.

• My 12 switch Aspire no longer sees his keyboard, USB port or the MicroSD card.

  I did everything I can think off resetting to the factory default value, which I am reluctant to do. Someone at - it else here's issue, or to know what I have to do?

  Padgett, thank you

  I had the switch 12 a week and was not aware that it requires from the back-end. Weird logic... and why not Acer explains this clearly?

  That solved the problem of keyboard, Marc of the Netherlands while the other sort by noting that some update disables the port USB and MicroSD. I lit them again in Device Manager, so that now everything works as it should.

  I'm a happy chappy now, but so much lost time this weekend due to Acer's poor communications.

  Thank you once again.

• How to connect a camera endoscope for an ACER aspire one D255E-notebook via a USB port?

  Hello community, I try to be hot to connect a camera small endoscope to an ACER aspire one D255E-notebook, I can not install a CD of the software on this model of laptop. Can I use the DESIGN MANAGER to install an external camera like this?   THANKS in advanced for any & all of your comments.   P.S. this notebook a starter for windows 7

  You'll need to install the drivers somehow.  If they came on a cd, you can copy it to a USB stick and install from there.

• Acer aspire 4330 laptop doesn't detect USB HUB under Vista

  Windows vista sp2.  Acer aspire 4330 laptop with intel celeron 575 2.0GHZ 667FSB.  USB hub has power source

  computer will recognize the hard drive or any device on plugin directly from the computer.  I tried unplugging hub and all the rest, stop, turn on and plug in Usb hub with hard drive.  No luck.  off universal host adapters - disaster - froze up was to restore.  Entered the management of feeding and unchecked "turn off hub, if it is in use to save energy" all these tips on the internet, but none worked.  real people need to microsoft, the anonymous general Internet.  asked if faulty usb hub, have a new "brand" on command.  will help isolate prob.  Please notify.

  Create a system restore point and try to disable and re-enable the USB host controllers. I suspect that the USB drive itself is at fault because of the external power supply. I would not exclude the possibility of a hardware failure of the USB. I would check with the manufacturer.

  What to update your chipset drivers? Have you done?

  I wish that you update your chipset and drivers. Die you a hero or you live long enough to become a villain... Black Knight

• Aspire V does not recognize the USB/phone device. Why not?

  Why does my laptop recognize my phone more?       He knows some device USB is plugged in, but it does not recognize.

  Download and install the USB Samsung drivers:

  http://www.MoDaCo.com/forums/topic/361286-26122015-latestsamsung-USB-drivers-for-mobile-phones-15550...

• Aspire E1 - 571 does not start USB recovery

  Get the error message saying phone needs recovery. Went into BIOS and selected USB HDD to boot. But as soon as I insert the USB key, the machine goes in loop simply display the Acer logo, black screen. Reflected on the USB (purchased at dealer) and there are files it contains. I tried to start USB FDD and USB, CD ROM, but they do not work either. What Miss me? Help please.

  If you need to reinstall your operating system:

  If your laptop still has the Acer erecovery partition, you can simply start by pressing ALT + F10 and follow the on-screen instructions.

  If you don't have this partition and want to use your USB recovery to reinstall your operating system, you must completely wipe your HARD drive first and then boot from USB.

  You can boot from USB drive just by pressing F12 and selecting the USB flash drive as a boot device, rather than change the BIOS boot priority.

  If your question is different, please post more details.

• Microsoft Bluetooth 5000 Mouse is recognized by my lapto under XP SP3, but the mouse does not work. The light just blinks green-red-green-red. I don't know where to go with this or just go back to my USB mouse for less hassle?

  I don't know what to do with this?
  I searched but seem to come with an XP service pack 2 fixed?
  Should I just stay with my USB mouse?

  Hello Pvtinc,

  Thank you for your message.  Please click HERE for some Microsoft troubleshooting tips.  Also, as seen in the thread HERE it seems that the green to flashing red indicates that your mouse is discoverable.  There are a few other troubleshooting steps listed in this thread that may provide assistance.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How do I go back & make the USB bootable or find a product key?

  I did the USB bootable to my netbook which has windows 7 starter edition for which I have a product key for. no option came to the choice except windows 7 Professional. so I chose the upgrade now I don't have a key for professionals

  Where have you bought the license for Windows 7 Professional?

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  Contact the Microsoft store:
  US: http://www.store.microsoft.com/Help/Contact-Us
  1-877-696-7786
  Canada: https://www.microsoftstore.ca/shop/en-CA/Contact-Us

• No mouse usb and kbd work once Windows 7 installed on don't aspire z1 602

  When installing windows7 on aspire z1 602 kbd and mouse usb stop working and I am unable to finish installing.

  Windows 7 is not supported on your model and probably missing some drivers of Intel chipset.

• ACER Aspire E11 (SD32gb) error "no boot device."

  Hello. I formatted Acer aspire E11 with windows 8.1 USB CD-ROM. It worked fine but the next reboot, it no longer starts and it does not accept either boot from usb, pen or usb cd rom, not same Hirens Boot begins. Don't always says "No boot device" with a picture of an SD card and a magnifying glass. Is there a solution to this?

  Thank you very much.

  OK, back to the UEFI.

  on the BIOS disable secure boot (just to identify possible)

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/27071/~/how-to-enable-or-disable-secure-boot

  Also check if F12 Boot menu is activated on the main tab.

  Press F10 save and exit, then try to boot from USB CD again.

• IPod Classic (80 GB) "unrecognized USB device" running windows 7

  I've recently upgraded to a new laptop (acer aspire 5738G) running windows 7. I managed to transfer my itunes through library and that you have installed itunes (x 64) that works well. When I plug my ipod classic (80 GB) on a usb port, I get a message saying "unrecognized usb device". I managed to make it work once, but when I did, I got an error understood saying "this drive could run faster" or something in that sense. I tried other usb devices and all seem to work well, so I guess that's the ipod drivers or a compatibility issue with 7 and itunes. I uninstalled and reinstalled itunes, have reinstalled the usb drivers and have browsed the net for a fix but wo's me again! I waited patiently a hotfix from microsoft or apple, but still nothing. It seems that there is a great problem of the spread. Does anyone have any ideas as what was once a small annoying problem turns into a right royal pain in the a$ $. Thanks in advance!

  I also have the same problem is "USB not recognized" and I have the old IPOD classic (20 GB).

  The problem started when I upgraded my home pc to Windows 7 Pro 32-bit of Windows Vista. My iphone 3gs is currently recognized properly but not the ipod 20 GB on the same iTunes 9.0.2. Device Manager reports the 20 GB ipod as "unknown device".

  My computer is a HP Pavilion Slimline s3620f. Almost tried everything:
  -reboot several times
  -Reinstall itunes several times
  -restart the service itunes several times
  -Reconnect the ipod several times
  -tried the front and back of the usb ports
  -deleted the Sentinel file under c:/users //musci/itunes/I've found solution on another forum

  ... still nada, zit, ala!

  Update: I've found a workaround. Fortunately, my ipod classic cable is a cable in there provided with firewire in addition to the usb cable. Since my home pc has firewire port, Windows 7 now recognizes the classic ipod through this port, have a drive letter and itunes works on it as well.

• Tecra 9000 - problem Usb

  I recently bought a second hand t9000, when he came to one of the usb ports didn't work. It was completely inadmissible, but the other was fine. now, the other comes back with "unrecognized usb device" every time I put something in. any ideas?

  Hello

  Do you think that it s a hardware problem?
  Eventually it s only a bad setting in the properties for the USB port.

  Possibly the device external USB cannot be recognized because of the enabled USB power management.
  To turn off the power on the USB hub, follow these steps:

  1. click on start, run, type devmgmt.msc, and then click OK.
  2 expand the USB Bus controllers node, and then follow these steps for each USB root hub listed:
  a. right click on the USB root hub, and then click Properties.
  b. click the power management tab.
  c. disable the allow the computer to turn off this device to save power check box, and then click OK.

  You could also try to remove and reinstall all USB controllers
  To remove and reinstall all USB controllers, follow these steps:

  1. click on start, run, type sysdm.cpl in the Open box, and then click OK.
  2. click on the Hardware tab.
  3. click the Device Manager button.
  4. develop Bus USB controllers.
  5 right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  6. restart the computer and reinstall the USB controllers.
  7. connect the removable USB storage device and test to make sure that the problem is solved.

  Buddy a note; Please make sure that all the fixes and patches SP2 is already installed on your laptop!

  Good bye

• Toshiba Store Art 4 USB 3.0 1 TB works not with USB3.0 or USB 2.0 port

  Hello
  I have a big problem with my external hard drive and I hope someone can help me.

  Here's the thing:

  I used my external drive only on computers that don't have any port usb 3 and all worked well. The drive has been used only with usb ports 2.

  Now, I got a computer with a usb port 3 and I was happy to be able to use my external hard drive at full speed.
  Has been fine until I wanted to transfer a file using my drive.

  The disc has been recognized either of usb ports 2. The NTFS partition is a partition BRUTE! I had to ' chkdisk/f G:' to make it work again on my usb ports 2. And some files were missing!

  Then, back on my other computer (usb port 3), the contents were not the same! I mean some of the files that I deleted when it is plugged into usb 2 returned when plugged usb ion 3! And then, back to the usb 2, partition became RAW and I had ' chkdisk/f G:'... once again!

  So, to make it as simple as possible, after some testing, it seems that the drive can only be used on the usb ports 2-only on ports usb 3 but can not be used at a time, which is very annoying for a portable external hard drive.

  I tried to format the drive to my usb port 2 and return on the usb port 3, the content came as if I had never formatted it and then back on the usb port 2, the RAW score again...

  I use Windows 7 and 8.1 Windows computers.

  Someone at - it experience that? What is the drive (Toshiba Store Art 1 TB USB3 4)? What is the USB 3 specification? Is - Windows 7 or 8.1 drivers?
  And above all: what can I do?

  Thank you very much!

  This external plug & play Toshiba HDD supports two USB standards: USB 3.0 and USB 2.0
  HARD drive around needs bus power 900mA to work correctly.

  The USB 3.0 port supports this standard 900mA. The USB 2.0 port allows only to 500mA.
  If in case the HARD disk is not working properly connected to the USB 2.0 port, I recommend you to use a USB cable to Y in order to connect the 2 ports USB 2.0 HARD disk.

  I have no idea why the content on the HARD drive is different, but from my point of few of the USB standard does not affect content.

  In my opinion, the HARD drive wasn't working properly using a USB 2.0 due to the low power.

  By the way: this HARD drive supports some additional features like the ability to oversight function and monitor to alert of the disk space that sends a alert when there is not enough available storage space.

  For advanced users, Toshiba has added the ability to customize the backup routine, including the ability to select only the most common file types for backup and change how many times a backup takes place.