Aspire XC-705 unable to wake from suspend mode, black screen

Similar Questions

• Portege Z30T-a unable to wake from sleep by any key

  I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5
  upgreaded Version Microsoft Windows OS 8.1 Pro 6.3.9600 with its CD.

  I can't wake the computer from sleep by any key, but the power button.

  TOSHIBA has opton for this utility who supposed to put.
  I try the following:

  Office assist---> system---> keyboard settings

  Here, I activate the only option which he claims will power on the computer from sleep mode
  by pressing any key.

  But the machine never replies to any key, but the power button.

  Any of you guys have the same problem? No work around?

  Hello

  Are you sure that you set the laptop on STANDBY mode and not in HIBERNATION mode?
  In my case, the option works correctly if the unit is set to the mode "SLEEP".
  If deep sleep mode, I have to press the power button to wake up the unit

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• Computer constantly wakes from Sleep Mode

  I have a new PC HP Pavilion Elite M9450f waking up constantly from Sleep Mode, even if no one is at the computer or even in the bathroom.

  Sometimes it will stay mode standby for a few seconds and other times, it can stay in this mode for 10-15 minutes, but he still wakes up mode standby by itself.

  I would appreciate any advice you can give me for this problem.

  More than likely, this is your internet connection, it to wake up.  I hope that someone will jump in and explain better than me how to turn off the wake of the lan setting.

• CS5 frozen when iMac wakes from sleep mode

  This problem just started, and I don't know if that's a problem INDD or Finder. When I wake my computer from sleep mode and try to access the INDD, I can't. I click on the application icon in the Dock and it will not come to the front. All my other apps will be. I have to force quit smoking INDDD every time, and then reopen it. It is if I have a document open or not. I tried to zap the PRAM and closing, unplugging everything and starting up but none of those who have helped. Any tips or ideas of what could be wrong?

  Best to post the actual URL. I guess it's: http://pastebin.com/raw.php?i=d6TgEEMv.

  In any case, the two diagnoses are quite revealing. For after the accident report:

  Thread 0 Crashed:  Main Thread  Dispatch queue: com.apple.main-thread
  0   libSystem.B.dylib                  0x96475aa2 __semwait_signal + 10
  1   libSystem.B.dylib                  0x9647575e _pthread_cond_wait + 1191
  2   libSystem.B.dylib                  0x964773f8 pthread_cond_wait$UNIX2003 + 73
  3   ...extensis.cpp-core-framework     0x2552e640 GCondition::Wait() + 48
  4   ...extensis.cpp-core-framework     0x255d1e6a GThread::StopThread(bool) + 214
  5   ...extensis.cpp-core-framework     0x255d36d1 GThread::~GThread() + 45
  6   ...extensis.cpp-core-framework     0x25555d4e GIPCClient::~GIPCClient() + 1214
  7   ....ExtensisFontManagement.sdk     0x25a99854 GAgentIF_IPC_Impl::~GAgentIF_IPC_Impl() + 34
  8   ....ExtensisFontManagement.sdk     0x25a98b5b GAgentIF::~GAgentIF() + 113
  9   ....ExtensisFontManagement.sdk     0x25823b42 boost::detail::sp_counted_impl_p::dispose() + 24
  10  ...extensis.cpp-core-framework     0x2552ad9f boost::detail::sp_counted_base::release() + 37
  11  ....ExtensisFontManagement.sdk     0x25823cd5 void boost::shared_ptr::reset(GAgentIF*) + 79
  12  ....ExtensisFontManagement.sdk     0x2581dacb GMystiqueSdk::CreateAgentIF(boost::shared_ptr&, unsigned long) + 95
  13  ....ExtensisFontManagement.sdk     0x257b03d3 GMystiqueConfig::GetRunningAgentProductMode(GMystiqueConfig::EProductMode&) + 121
  14  ....ExtensisFontManagement.sdk     0x257b72ca GMystiqueConfig::GetIsAgentRunningByProductMode(GMystiqueConfig::EProductMode, bool&) + 746
  15  ....ExtensisFontManagement.sdk     0x257b8635 GMystiqueConfig::GetIsCoreAgentProcessRunning(bool&) + 33
  16  ...Management.plugin-interface     0x25388601 GetIsCoreAgentProcessRunning + 28
  17  ...is.AutoActivationPlugin.ID7     0x24beac0c CoreAgentInterface::ProcessNotifications() + 232
  18  ...is.AutoActivationPlugin.ID7     0x24bdab16 SuitcaseIdleTask::RunTask(unsigned long, IdleTimer*) + 710
  19  ...adobe.InDesign.AppFramework     0x1a75ff85 GetPlugIn + 242005
  20  ...adobe.InDesign.AppFramework     0x1a760eac GetPlugIn + 245884
  21  ...adobe.InDesign.AppFramework     0x1a702e78 0x1a700000 + 11896
  22  ...adobe.InDesign.AppFramework     0x1a7285fa GetPlugIn + 14282
  23  com.adobe.InDesign                 0x000028ab main + 187
  24  com.adobe.InDesign                 0x000027c6 start + 54
  

  This is the plugin Extensis Suitcase Fusion self-actuation!

  So, disable it to confirm. Make sure that you use the latest version and if so, take up with Extensis. I think they have a free support on their web site.

  In addition, you must update InDesign to 7.0.4 you run 7.0.3 and there were a lot of bugs.

• My laptop Lenovo U310 touch of Windows 8 is unable to wake from sleep or left over an extended period. How can I fix it?

  Whenever I leave my laptop alone for a while, or after I put it on the mode 'sleep', I can't use my computer. It freezes is or I can't connect at all on the main login page. I get an error screen (with a frowny face, oddly enough) who says my computer needs to reboot, and that I should look for DRIVER_POWER_STATE_FAILURE online.

  This is a new laptop and my sister has the same as well, and I am very disappointed to have this problem with Windows 8, Lenovo, or one who is behind the faulty start upward so right from the start.  I looked at etc and previous discussions and nobody has had the same question again. I already uninstalled McAfee antivirus with the official uninstaller since my trial has expired, and I also have the error message "your system does not appear have with Intel's technology for fast ignition" on my desktop each time I connect. I think that I've updated my laptop once or twice since I got it. One of them would be the issue? Any help please?

  Aaariel,

  I ended up sending my computer Lenovo also, because the store would not take it back.
  They also replaced my SSD and now it works fine. I highly recommend that all send you it to the service department and do not try to fix it yourself. My computer wakes up really quickly now and actually starts faster than before.

  Thanks for all your help!
  Julie

• Satellite Pro T130 - unable to wake from mode 'sleep'

  I have a Toshiba Satellite Pro T130 running Windows 7 Professional 64 bit.

  After installing the Wireless Update September 29, such Manager recommended by Tempro, I'm problems with an awakening of the mode standby. Most of the time my laptop just don't wake up more and all I can do is to the hard switch off and turn it back on. I tried to solve the problem by changing the configuration options of the advanced sleep mode, and it seemed to work for a while, and problems to restart again.

  Please help me with this issue, it is terribly annoying to have to turn off and turn on again everytime my laptop goes into mode 'sleep', not to mention the fact that I have to take care of not to let something unregistered, to avoid losing data.

  Thanks in advance.

  You have already started a thread on the same topic here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=222143

  Please follow the first thread to prevent certain misunderstandings

• JO 8600 Pro wake from sleep mode.

  works great all tasks as long as he is unable to sleep. Must unplug and plug in again once it goes into mode 'sleep'. uninstalled and re-installed from cd and redownloaded updated. no change

  last 3 mos extended warranty. 9 k copy perfect machine of 2 1/4 years and product until this problem developed. Built in obsilesence?

  My ' don't wake up the problem has been resolved! Any suggestions on the support forum is used to verify that all the settings were exactly as they should be and verified that the problem existed in the fact that I was trying to run the printer off of a mobile access point. The signal from the MiFi device was apparently in conflict with the signal wireless to the printer (Greek to me).

  Technical support had me turn on the wireless directly on the printer and after some specific steps in this process my printer refuses is no longer wake on demand and all three of my computers communicate seamless, wireless and week + chaos in my household created by my goal tirelessly on getting my printer works perfectly once again back to calm. 24 hours and counting, Yes!

  There are answers. Do not give up. I hope that you will find yours even if you still have some hair left.

  This post as SOLVED! but not by the steps described in the response to my post.

• Ssatellite U300 - 13K does not wake from sleep mode

  He has had this problem with windows vista and I decided to switch to Win7, but it still has the same problem.
  He falls asleep, but then don't wake up no matter what I click.

  Can you help fix?
  Thank you

  How set you the mode standby?
  The power LED flashes when the laptop is in sleep mode?

• Equium A60 will not wake from sleep mode

  Hello

  I have an Equium A60, my laptop is entered 'sleep' mode and when I pressed the button that flashes orange that nothing happened, after trying a few times still nothing happened.

  I decided to take out the battery to try to recitify the problem. Unfortunately no power now lights. All of the suggestions.

  Hello

  Strange.
  You said, you have removed the battery, but you left it for several times?
  Disconnect the power adapter and remove the battery from the laptop. Wait 15 to 20 minutes, and together the two sides again to the laptop!

  Please post again if the laptop works again!

  Good luck

• T500 does not wake from sleep mode

  My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake mode 'sleep', once the lid is closed. I have finally returned to the use of hibernation, but I was just wondering if there is a new patch that I'm not aware of. I tried to find info a few years back before hibernation. Any ideas?

  Thank you.

  Dave

  Try to install the latest version on it. 1.62 should collaborate with the T500 however.

  You can also see if your BIOS is up to date.

• HP ProBook s 4540 - does not wake from sleep mode

  I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

  I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

  My computer - right click - Properties-System - Device Manager - graphics card

  Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

  Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

  CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

  If you are installing error cinebench or aida64-online

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

  If windows experince index error "windows media encoding/decoding performance.

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder

• Vista Home Premium doesn't wake from sleep mode.

  I've been recently updates of the system. Not sure if it is a cause. I checked my device keyboard and mouse and they are set to wake the computer. SO why this happens...? I'm not a wise person on the computer. I pretty much try tips that I find online, even though I know not what half the verbage means. Then. pls help to use then and very basic jargon. Thank you for your understanding...

  Hi lesann1,

  1 have. the updates you tried to install?

  Step 1:

  You can try to upgrade the video card and see if it helps:

  Check out the link:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2:

  Also, try the following steps and check.

  Click Start, type of aircraft in the area start search and then click on Device Manager in the list programs.

  In the user account control dialog box, click on continue.

  In Device Manager, expand mice and other pointing devices.

  Right-click the USB mouse, and then click Properties.

  Click the power management tab.

  Clear the allow this device to wake the computer check box, and then click OK.

  Also try to clear the allow this device to wake the computer to also network adapter.

  Step 3:

  You can also recreate the power plan and check.

  Check out the link:

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.