ASR PowerEdge R610 power defined at last but autostart

Similar Questions

• PowerEdge R610 add hard drives to Hyper-V Server 2008 r2 PERC6i

  I have:

  PowerEdge R610 PERC 6i

  3 x 146 GB SAS RAID 5

  OS: Hyper-v Server 2008 r2

  I just added three more 146 GB SAS drives

  How to expand the RAID 5 from there?

  I was reading up on managing open but have not seen a clear passage until you get it the best way to operate.  Thanks in advance.

  In OMSA, go to storage, PERC, virtual disks and select Reconfigure in the drop-down list of tasks available for your RAID 5.  It will start a wizard, through the addition of the new drives in your RAID 5.

  Physical disks must show as the first LOAN (if the display of Foreign Affairs, which must be cleared before you can do anything - storage, PERC, Information/Configuration, foreign/erase in the menu drop-down for the controller).

• Satellite A - power light turns on but nothing happens

  The laptop does not start. The power light turns on but nothing happens. Before that, error message 0 x 0. has been posted.

  Can anyone suggest what to do?

  Hello!

  It sounds like a hardware malfunction...

  Try this workaround: remove the battery and the AC adapter. Wait one hour and then reconnect the battery and the AC adapter. Now, try to restart the laptop.

  I put t know what laptop you have exactly but if it doesn t work you should go to an authorized service provider. Technicians can check your laptop.

  Good bye

• Request preventivo sostituzione card mother server Dell PowerEdge R610

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al server Dell PowerEdge R610 fuori co Service Tag GGFN25J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Alberto Daponte

  IBN Savio Srl

  Buongiorno, the sto contattando via e-mail.

• PowerEdge R610 - Disco rotto [GRO]

  Salve,

  We have a DELL Poweredge R610 Server e uno dei brain

  SAS MBC2073RC Modello da 73 GB 15 K RPM pulito rotto.

  Potete inviarci UN preventivo by his sostituzione?

  Speaking saluti,

  ING. Lucadei Carlo
  Village of speech s.r.l.

  Salve,

  the sto contattando by mail by the quotazione mandarle

  Saluti,

• Is it possible to connect two DELL PowerVault MD3200 single PowerEdge R610 Rack Server

  We have the SQL cluster with two nodes (the two PowerEdge R610 Rack Server) connected to the DELL PowerVault MD3200. As we are short on space, the idea came to add additional DELL PowerVault MD3200 to the cluster. Is this possible?

  Hello, IPM.

  Yes, you can add an another MD3200 to your R610 server & get both to work.  As you run lack of space, you can also simply add a MD1200 if just needing space as the MD1200 is cheaper than a MD3200.  The MD1200 will connect via your MD3200 sas & can provide you with the additional disk space if that's what you're looking for.

  Please let us know if you have any other questions.

• Power supply, fans, lamps, but nothing else - Presario SR1000

  Hi can anyone help? I have a (HP) Compaq Presario SR1000 and its failure to start. Worked perfectly since I bought it a few years ago. Close last night and does not properly start this morning.

  Problem is that push the button of power as usuall and fans start emits light at the front of the computer, but there is no noise readers activation and does not raise the monitor to come. It's like a processor or software problem. I was wondering if anyone has had similar problems or know what may be the potential cure.

  Any help appreciated. A soon Guy

  Thanks for the suggestion, but it turns out to be the graphics card that failed. If new more powerful graphics card and everything back to normal now. Thanks for the help.

• Upgrade memory PowerEdge R610

  Hi all

  I have so few R610s I want to upgrade the memory on. I have read the documentation I found to support, but I'm still a little confused. They are all single-processor (the A side) with six 2 GB DIMMS. (12 GB total) I need to upgrade to 20-24GB. If I read things, I can't use the B side, since there is no processor... What would be the best way to do this and there at - it most clear documentation on how memory banks/channels work? I read that this is a difference where you are installing the module DIMM (A1 A2 A3, etc), but I couldn't understand this past. I've also read that if you use all 6 on one side, it decreases the speed of the bus at 800 mhz. Is this correct? I appreciate any help!

  Thank you!

  Hello

  With BIOS update 1.1.4 it supports two DIMMs per channel at 1333. Given that the system has only two DIMMs in each channel, it will run at full speed with all slots populated. So to get to the memory quantity you need six 4 GB DIMMS. FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/PowerEdge-r610_Owner%27s%20Manual2_en-us.PDF

  Page 116

• low power mode is on but the battery is full

  My Iphone 5 c run 9.3.1.  When I switch on the low power mode, it restricts my auto-lock to 30 seconds (it is grayed out).  The problem is with the low power mode on, my battery availability is 98% (appears in yellow), but the low power mode should be committed only to 20% or decrease of availability.  How do I fix it so low power does not come on until I get low on battery reserves?  Thank you!

  No matter how much energy batttery you left, if you activate the Low Power mode, the indicator lights yellow. My iPhone 5s has 80% battery left and I turned on the low power and the yellow light.

  Look at the screenshot of the iPhone here.

  IPhone low power - Apple Support Mode

• Satellite A105 - power light lights up but the white screen

  Hello

  I have a Toshiba Satellite A105 and I went on vacation and the laptop was working fine. I ve come back and the power light is on, I can hear the laptop a few noises but the screen remains empty. I tried to connect another monitor to it to try to get out of the way, but nothing seems to work at all!

  Anyone have any ideas?

  See you soon!

  Try this:

  (1) remove the battery and unplug the AC adapter
  (2) wait about 30 min
  (3) reconnect the battery and the AC adapter
  (4) try to put the laptop

  If it does not help I put t see any other solution as to contact the ASP in your country to control the laptop!

  Good luck

• L50 - A satellite - state of the power supply is lit, but laptop will not start.

  Hello
  A few months ago, I bought a new Toshiba laptop L50 - A Satellite. He worked incredibly in all directions until about a week ago when it lights. He has been connected to the charger with the charging light but does not illuminate. When I press the power button, the small ring of orange around the button light turns on and will be so all the LED lights on the front of the laptop, as well as I can hear the fan and other work items, but the screen remains black. This has been the case for a little over a week now and at random, two of the times I tried to power on my laptop, he turned on and working but then after that be cut, it wouldn't work again. He has not worked since 5 days and since then I tried to turn it on.

  One of my friends who knows a thing or two suggested perhaps it was the display that was defective and should I try to connect it to my TV via a HDMI cable. This seemed logical, so I gave him a test in the hope that he'd at least let me know what was the problem, but no fixed image displayed anywhere.

  My laptop is almost always connected to the charger and an expensive cooling fan, so I guess that battery and components must still work most of the time, and I've read that this laptop is designed so that you cannot remove the battery, but I do not know how to in any case.

  I tried a few different methods to try to start it as now the Start button / stop and the ESC key for 10 seconds, now back while pressing the power button and pressing the power button while pressing F8 repeatedly. But none of them worked so far.

  If anyone has any ideas or a way to help, that would be greatly appreciated.

  Thank you, Julian.

  Hello

  The L50 - A Satellite supports a stop (hole) switch located at the bottom of the unit.

  Cell phone is freezing, do not start or has a power failure, which cannot be resolved by pressing the button for 10 seconds (force shutdown), please use stop force switch instead of the main battery.

  During a stop by pressing this button force, the behavior of the system is identical to unplug the AC adapter and remove the main battery.

  More details here:
  Stop power switch (hole) for models with one main battery sets
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Hope this helps

• G62t-250 power light lights up but no noise of fan and black screen

  I bought my mother a computer laptop hp G62t-250 in 2010. When I turn on the laptop, following happens:

  1. power is turned on

  2. the CAPS button is on

  3 WiFi light is orange.

  4. NO fan or other sounds.

  5. black screen.

  What is the problem here? and suggestions to fix.

  Thank you.

  If you are not able to make your screen lights up after doing hard reset & bios restore, then this is definitely a hardware issue that must be like.
  But restore BIOS should do several times to make it successful.
  No other way that I am able to suggest other than these if the power appears on the screen.
  Since no fan or spin is heard & screen is true black, I suggest that the chances are slim to get a troubleshooting.
  
  Try and if it is not
  Give it to get it repaired. Contact HP in your area.
  
  Thank you

• HP DESKTOP Workstation - fort Fan - 420Z sees power light come on but does not start

  My workstation HP420Z worked well until it didn't. When I start now all I get is a sound whirring after about a minute or two.

  I have a clean machine (no dust)

  I tried reinstalling all the cables,

  Remove and replace memory

  Replace battery remove

  Reset the CMOS

  Reinstalling the video card

  Remove the USB cable and see if any change in the symptoms

  Computer is HP factory refurb just more than a year (380 days)

  Was going to buy a PSU and see if it is the problem, but I live in a remote area with limited access to the post office or UPS.

  Any suggestions on what I could check?

  RESOLVED - NO MOTHERBOARD

  AND I see that this problem came with others.

  I had 8 sticks of memory and found that one of them was bad.

  Strange thing is that in memory last questions always gave me a beep

  start up. AND while that memory seemed ok on Ramtest

  I took all the sticks and add them one at a time.

  Only one of them would cause the machine to not start and loud snoring.

  Works well with less memory of 2 GB. (Memory has been installed at the factory of HP - 380 days)

• What button / stop pressed power on display Nothig but what liberation turns off

  Hi all

  I have HP ProOne 400 all in one PC

  When I press power button / stop hard drive LED turns on but nothing shows on the screen when the power button turns off during this power LED remains on. I checked with another power adapter the same power response is quite well.

  Concerning

  Muhammad Xochitl

  I discunnect all the components attached to the motherboard and plug one by one. Now its working fine

• Request offer slitte/representing Dell PowerEdge R610

  Salvo, avrei UN supporto di need by it power edge r610, per poterlo fix nel mio rack.

  Buongiorno, OTS will one ' email by putting manage the request e richiederle it service tag del sistema.

  Grazie

  Marco