L50 - A satellite - state of the power supply is lit, but laptop will not start.

Similar Questions

• HP f023 wm Notebook: led power supply for computer Hp laptop will not go out and won't restart

  I only had my laptop for less than a month. When I stop the power light did not go as usual and it does not restart. What can I do? Thank you.

  Hi @jean309,.

  Thank you for visiting the Forums HP's Support and welcome. I read on your computer laptop 15-f023wm HP and screen flashing after his stop. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system. If you need an update on the system, you might have a problem as you describe.

  If you ever need to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I downloaded the latest DNG from Adobe, but it will not read my Canon RAW files. I am running windows 10

  I downloaded the latest DNG from Adobe, but it will not read my Canon RAW files. After downloading, I loaded the program and then go to select the folder. When I go to records RAW files aren't there. I used DNG in the past with no problems but I have a new PC and running windows 10 and he would not consider my files RAW Canon cameras for some reason any. What am I doing wrong or it is not compatible with windows 10.

  Thanks, I use PLR, but I wanted to convert using DNG. It is all sorted now

• I downloaded bridge in my application, but it will not start when I click the icon

  I downloaded bridge in my application, but it will not start when I click the icon

  Hello

  Did you try to unsintall and reinstall the application?

  Kind regards

  Sheena

• Have a computer dell laptop. try to install the printer but the spooler is not running. I started the spooler, but it will not start. What is the problem

  I want to install a Hp deskjet printer downloaded 1000 Hp and installed, software is gone at the end of the installation and can not end spooler spooler running nut or an rpc error. Had a Hp technician to try to set up the printer spooler, but he will not remain in the start mode. I have restored the computer to a previous restore point and reinstall the software of the printer again, but have the same problems.

  Hello

  What exactly happens when you try to print? Error message? Previous post the exact error message.

  Step 1: Run the fix it tool in the following article and check.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk

• State of the unknown connection, dependency service or group do not start.

  Original title: unable to connect to the internet.

  I can't connect to the internet. He said unknown state with a Red Cross of the connection and the dependency service or group does not start. My diagnostic policy Service stopped and can not turn on the firewall

  Hello

  -What security software is installed on your computer?

  I suggest you perform the methods mentioned below.

  Method 1: Security Microsoft scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2: Enable disabled services and start the services.

  To enable the disabled services and start the services:

  a. click Start, type services.msc in the box start the search.

  b. Select Services in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. right click on phone and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the Service status and then click OK.

  f. Repeat steps 3 to 5 for service remote access connection manager and Remote Access Auto Connection Manager service.

  Method 3: Remove unwanted entries from EAP (Extensible Authentication Protocol) of the register.

  ESTABLISHMENT OF THE REGISTRY:

  Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  a. click Start, type regedit in the box start the search.

  b. Select regedit list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. navigate to the location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP

  d. identify the subkey used by your modem.

  e. remove the other subkeys other than the default (13, 25 and 26 are by default).

  Method 4: If the methods above does not help then I suggest you perform the restoration of the system to the point when the service worked very well.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is helpful

• Power lost during printing. Printer will not start. Need firmware for C5550.

  I lost power while printing a few days ago. The printer won't reset/reboot to the normal start screen. It displays a blue screen with an icon of power button and the message "BA00C63C". The power button does not work. I tried holding it in... does nothing. I unplugged the unit for two days to let the shock caps, but the unit still will not be reset. I would try to reflash its firmware. Where can I get the right firmware for a Photosmart C5550 all-in-one? Thank you.

  Too bad. I had the camera reset/reboot. Unplugged, waited 30 seconds and plugged back while now the 'aid' a 'power' buttons

• HP Pavilion dv7-1240us: preheating indicator light, a fan noise is heard, but the screen remains black, laptop will not start.

  Perform a hard reset

  I added an external monitor and restart the computer. All seeing power are on, fan and hard make sounds and still nothing on both screens.

  Reinstall all hardware

  Still nothing but black on both screens.

  Is it possible that a virus could cause black screen and does not start.  Seems the laptop crashes, because all the lights remain.

  Please notify.

  Hi there @SVJ69

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you get a white screen when you turn on your system. I'm happy to help you with this. I would recommend that you start with searching through this page. Since the construction in and external display do not respond, I would start with the displays.
  Troubleshooting of black screens with no start-up or start-up error message
  Problems related to laptop (Windows 7 and Windows 8) displays

  This can help more evenly. If another hand, you get error messages, or a repetitive pattern of flashing LED, let me know.

  Computer won't start (Windows 7, Vista, XP)

• I installed the trial of Captivate 8, but it does not start on my computer.

  It works well on the computer of my wife, but for me, the start screen bit is displayed and then freezes.  Any ideas?

  The first thing I checked are the requirements, which seems to fit: here are my specs... maybe I miss something?

  Name of the operating system Microsoft Windows 7 Professional

  Version 6.1.7601 Service Pack 1 Build 7601

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Mikes-computer system name

  System manufacturer system manufacturer

  System product name model system

  System Type x 64-based PC

  Processor AMD Athlon (TM) II X 4 logical processors, 4 Lossnay, 3400 Mhz processor 4 965

  BIOS Version/Date American Megatrends Inc. 1509, 30/03/2010

  SMBIOS 2.5 version

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  Mikes-Computer\Schmidt username

  Daylight saving time from the centre of zone

  Physical memory (RAM) installed 8.00 GB

  Total physical memory 8.00 GB

  6.02 GB available physical memory

  33.8 GB total virtual memory

  31.1 GB available virtual memory

  Page file space GB 25.8

  Paging file C:\pagefile.sys

  Try to "uninstall" temporarily all fonts and keep only the basis of the value to check if it is the culprit. No guarantee, worth a look.

• I have windows xp media center edition 2006 when I put in the sdhc card, nothing happens but it will not work on windows 7

  When I remove my camcorder sdhc card and put windows xp I guess he's not reading but it will work in wimdows 7 I have service pak 3 instaled on my computer that I need to install something else

  You may need to install a "patch".

  See if these items help you:

  "Fix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards"
    <>http://support.Microsoft.com/kb/934428 >

  «The 923293 hotfix adds support for SD memory cards high ability in Windows XP»
    <>http://support.Microsoft.com/kb/923293 >

  It is also possible that your card reader itself does not support SD cards that are more than 4 GB (i.e. SDHC).

  HTH,
  JW

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Unable to perform backup task and the error is ' Service of Application COM + will not start... "

  Original title: the Service Application COM + does not start

  The Service of Application COM + does not start and shows the event ID 7000 error 1053 - does not respond within a reasonable time. I checked all the dependencies, and they are all started. SFC does not detect any system error. I can't backups work because of this problem.

  Your answer is completely wacky. While searching for a resolution, I found another thread on Norton forum that showed an error in the ComFix script. Once I fixed the error in the script, and he ran, the problem has been resolved.

  If a simple script can solve this problem, why is it not in the Microsoft KB? And why you suggest all these fixes out of the base so I needed to restore a CAB file from a backup?

  Found a similar to KB2481190 fix:

  "If you're in a scenario where you have already migrated and have corrupt COM +, you can use the following as a script to restore the repository COM + original. Copy the text indented following in Notepad and save it as COM_Restore.vbs:

  Dim objComCatalog

  Set objComCatalog = CreateObject ("COMAdmin.COMAdminCatalog")
  objComCatalog.RestoreREGDB "C:\windows\winsxs\amd64_microsoft-windows-com-complus-runtime_31bf3856ad364e35_6.1.7600.16385_none_b5bfb0b8ee629431\R000000000001.clb".

  MsgBox "restored."
  Set objComCatalog = Nothing

  Once you've saved the script, start a command prompt and navigate to the directory in which COM_Restore.vbs was registered. Type the following command:

  cscript COM_Restore.vbs

  Once you see a pop-up with "Restored backup!", you can close the command prompt and restart the client computer. »

• Retrieve the State of the power supply

  Hello

  I am currently using the wonderful listVMByFolder script (http://communities.vmware.com/docs/DOC-10059), and I would like to know how I can retrieve the State of each virtual machine supply, I have the list. I've been using the Perl SDK for about 2 days (Yes, there is not a lot), and while I understand how I would 'normally', I don't do not understand how to retrieve this information while being in such a statement:

  If ($child_view-> isa ("VirtualMachine"))
  {
  # Some code here
  }

  How can I retrieve this information because I don't really work on a VM object, that I would find in any tutorial out there, like something like this:

  
  

  My $vms = Vim::find_entity_views (view_type = > 'VirtualMachine');

  foreach (@$vms)

  {

  Print "VM:". "." $_-> config-> name. ", powerstate:". "." $_-> performance - > powerState-> val. "\n";

  }

  I thank you and have a nice day!
  

  Was just when I saw that you caught the misspelling