ASSERT in LSP

Similar Questions

• Whenever I connect to my computer I get this message: «assert in LSP...» Failed to initialize the mutex. ERR = 5 "

  original title: everytime I log in I get this message... Assert in LSP... Failed to initialize the mutex. ERR = 5./common/shared_memory_ptr.h:188

  X assert in LSP

  fake

  Failed to initialize the mutex. ERR = 5

  ./Common/shared_memory_ptr.h:188

  Abort retry ignore

  What this means... what should I do to fix this

  If I go to any site... it redirects me to one of the CHOICES... Lost IM really have no computer knowledge

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode with network and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• assert in LSP error retry message __abort ignore__

  I abort or ignore, and the message disappears. This message almost everytime I go to a new Web site.
  How can I get rid of her / it correct?

  TMB15,
  Welcome to the forums.  What you need to do is to reset IE and test.  The link below goes on reset IE and has the possibility of automated FixIt as well.
  http://support.Microsoft.com/kb/923737

  Let us know if that helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Important update fails several times for Service Enhancement Pack - gives "WindowsUpdate_00000783" "WindowsUpdate_dt000" with 783 an unknown error.

  Service Pack1, kept getting this error, should upgrade to service pack 2 (for Vista) - still getting this error. Somewhere, I found referance that this update has to do with some features of Internet Explorer. Could be as this box appears on occasion:
  'ie.xplore.exe '.
  "Assert in LSP.
  "g_socket_data. Lookup (s) is 0 "
  'capture\lsp\nolsp\wsp_patches.cpp:1313 '.
  My choices are to quit, retry, or ignore
  I click on cancel or ignore (depending on my level of frustration) and should do so several times before the box disappears. Then, everything continues as usual.

  I don't see any other negative effect of this failure of the update or the pop up box (they can not yet be linked).

  Hello old dad,
  Thank you for writing to Microsoft Vista answers Forum.

  Try the following steps:
  1. first of all, I would like to ask allows you to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.
  2. you are trying to perform the optimization of the Internet.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;936213
  3. If you have Internet Explorer 8, try to uninstall Internet Explorer 8, and then try to run the update.
  4. you can also try the following article below for General windows update issues.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;822798
  5. try to disable security software during execution of the update of Windows.
  Let us know if it helps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• capture/LSP/nolsp/wsp_patches.cpp:1313

  My computer keeps popping up this error code and I don't know what it is.  He did it when I tried to show videos, but now he's in my email as well.

  See if this applies:
  http://www.Vistax64.com/network-Internet/191880-Iexplore-exe-assert-LSP.html

  -steve ~ Microsoft MVP Windows Live ~ Windows Live OneCare | Live Mesh | MS Security Essentials Forums moderator ~.

• Why Firefox continues to assert that the Java Deployment Toolkit is known to be vulnerable.

  The original issue with Java has been corrected but FF continues to assert the same caveat that must be confusing at least and a road block for others at worst?
  There is a thread
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=636633
  who "speaks" it and the Anthony Hughes, Mentor of QA person (: ashughes)
  said that the question should be posted here (don't know why he wouldn't do himself, seems very little helpful as a "Mentor").

  So, I write a question, which is actually a request that the Devs remove this warning.
  It has nothing to do with my OS and is not need me to allow you to install something to collect information, simply install Java and check the Plugins...

  Ignore this response. Mods, please remove me.

• CP assert error HP slate 6

  Random start Cp assert error poping up upward and disconnects from the network, restart, it appears every time. It started after the FACTORY RESET. Help, please.

  SLATE 6 VOICES TAB

  HSTNH-B19C model
  
  ANDROID VERSION 4.4.2
  
  3.4.39 KERNEL VERSION
  
  V1.01.06_2141003.439 BUILD NUMBER
  
  Serial NUMBER [number of Series edited by Moderator]

  Hey @delvindavis989 ,

  Welcome to the HP Forums!

  I understand you get CP assert errors on your slate 6 tablets.

  When you ran the factory reset you do it from the settings > backup and restore, or did you using a microSD card and the original image?

  If you did not reset with the image please try that now by using the steps described in the section called 'Reset when the Tablet does not start' in this guide: perform a factory reset on your tablet (Android KitKat, Jelly Bean)

  If that fails, contact the HP support by phone. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

• LabVIEW call DLLs Visual Studio - error - "Debug Assertion Failed"

  Dear Forum,

  I made the wrappers for the c codes ++ writing Visual Studio 2008 for some time. I recently worked with a c++ application.

  However, this time, I get an error expected. Alien, the code calls the dll worked previously. With no retouching, I closed LabVIEW for a few hours, it opened again - and this error message (see below) appeared since. I tried to restart the computer, the Subvi rewriting and checking the prototype of the function.

  Nobody knows what this assertion of debugging message failed try to indicate?

  

  It seems that when I run the LabVIEW VI when it calls the node library call. It does not return and error boolean as designed in c++ code.

  Note: All other containers of c ++ and LabVIEW code works, but not this one.

  Any advise would be very useful indeed.

  Kind regards

  James

  Hi all

  I have now solved the problem I had.

  The dll must be in the same location as the config file a dependency.

  Van

  James

• Microsoft Visual C++ Runtime Library Error - r6025 Assertion

  I m playing game Terrorist Takedown - Covert Operations Microsoft Visual C++ Runtime Library Error - r6025 Assertion

  Hey Munir AhmedMengal,.
   
   
  It is a problem that must be corrected by the person who wrote the computer program, not by you (the person running the program).
   
  Check this link for more information:
  C Run-Time Error R6025
   

  Download the Visual C++ package from the link below and install and check if you can play the game successfully.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Always the same, contact the game manufacturer for assistance.

• Comcast installs a LSPs in Winsock? I need to reset Winsock and don't know if I'll have to reinstall a LSP for them.

  We are running XP with SP3.  Network Diagnostics offers to reset Winsock to default settings, but I'm afraid with any LSP that Comcast could have installed.  Comcast can tell me the answer.

  Hello

  I suggest you follow the link mentioned below, perform the steps and check if that helps!

  http://support.Microsoft.com/kb/811259

  Let us know if it helps.

• How can I fix a message on screen ASSERT FAILED\

  THIS MESSAGE IS DISPLAYED WHEN I BOOT XP

  ASSERT FAILED\projects\wtKernel\scr\win32\core\cmcodemodule.cpp:90m_code handle! = NULL

  Hi GraemePippen,

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Cannot install Need For Speed: Shift 2 Microsoft Visual C++ Runtime Library Assertion failed!

  Original title: MsiExec install problem.

  ---------------------------
  Microsoft Visual C++ Runtime Library
  ---------------------------
  The assertion failed!

  Program: C:\WINDOWS\system32\MsiExec.exe
  File:.\CaCheckDiskSpace.cpp
  Online: 293

  Expression: 0

  For more information on how your program can cause an assertion
  failure, see the Visual C++ documentation on asserts

  (Press Retry to debug the application - JIT must be enabled)
  ---------------------------
  Abort Retry Ignore
  ---------------------------

  I am trying to install the new Need For Speed: Shift 2 and what is happening.

  What should I do?... I checked the installation on other computers, and it works, it's just my computer I guess.

  Thanks in advance ():

  Click on the link below to view the titles of Need for Speed that show to be compatible with Windows 7. It may not be a list complete, so you need to check on the manufacturer's website.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=need%20For%20Speed%3A%20Shift%202&page=1

  If it is not compatible, you can try and do a right click on the seutp.exe or .msi and select 'run as administrator '.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Marilyn

• Installed Layered Service Provider (LSP) is defective, lose the internet connection

  One of my computers lose the ability to connect to the internet once a day or two.  When this happens, I can not connect through broadband or modem.  Usually, he regains the connection after an hour or two.  It also includes the connection when I restart the computer.  The problem started after about a year of use on this computer.  The computer is a Toshiba Satellite A215-S4757 with Vista Home Premium, Version 6.0 (Build 6000).  Other computers do not have this problem.
   
  Windows Network Diagnostics displays the message:
   
  A required network component is not working properly on this computer
   
  A provider bunk (LSP) installed is defective.
   
  Remove the defective network component
   
  I have thoughts on what is causing the problem and how to fix it.

  
  

  ICS internet connection sharing. A computer connects to the internet and
  others connect to the computer first. ICF (Internet Connection Firewall)
  protects against intrusions.
   
  http://support.Microsoft.com/kb/811259
   
  Manual steps to recover from Winsock2 corruption for Windows Vista users
  Winsock corruption can cause connectivity problems. To solve this problem by
  using Diagnostics of the network in Windows Vista, follow these steps:
  1. click on start and then click Network.
  2. click on network and sharing Center.
  3. in the network and sharing Center, click on diagnose and repair.
  Note You can also access the network and sharing Center in Control Panel.
   
   
  Reset Winsock for Windows Vista
  To reset Winsock for Windows Vista, follow these steps:
  1. Click Start, type cmd in the start search box, right-click on cmd.exe,.
  Click on run as administrator and press to continue.
  2 type netsh winsock reset at the command prompt and press ENTER.
   
  Note If the command is correctly entered, you will receive an error
  Message. Retype the command. When the command is executed successfully,
  an e-mail confirmation will appear, followed by a new command prompt. Then, go to step
  3.
  3. Type exit and press ENTER.
   
   
  --
  ..
  --
  "wuverton" wrote in message news: 19cb1db0-a9f8-493-a332-8725d 6165869...
  > I found a temporary solution. It seems that the Internet (ICS) connection Service
  > the origin of the problem. When I stop this service, I immediately
  > again to the Internet. If I take ICS, I lose the connection. ICS
  > restarts when I reboot, so the solution is temporary.
  >
  > Among other things, ICS provides intrusion prevention services. Is it
  > blocking of the Internet to stop trespassing?
  >
  > It is sure to have turned off ICS? If not, how can I permanently fix ICS as well
  > just to stop my internet connection.
  >
   
   

• Need to fix a Visual C++ Runtime Library error: failed assertion. mjutil.cpp on how to fix this?

  Im getting the same Visual C ++ Runtime "Assertion failed" but its saying my file is mjutil.cpp, there seems to be a problem with flash player. I installed the new version and still no luck. I don't have real player or quicktime installed on my machine.

  I ran sfc and it did not help.
  I installed 4.5 framework and reinstalled other redistributes like C++ 2008 and 2010, nothing helps.
  I am at my wits end because my laptop computer webcam on a dell computer not working anymore and flash player still crashes. I HATE ADOBE FLASH!

  My computer is a dell running Vista m15.

  Hi Jarrod,

   
  I imagine the inconvenience that you are experiencing.
   
  1. don't you make changes to the computer before the show?
   
  2. When you get the error "Visual C++ Runtime Library error: failed assertion." on mjutil.cpp'?

   

  3. what exactly is the problem with the webcam?

   

  For problems with the Webcam Dell, refer to the link and follow the steps:

   

  Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612&DoNotRedirect=y

   

  Problem with Adobe Flash player:

   

  1. when exactly the reader flash crash?

  2. what web browser do you use?

   

  Check out these links for assistance:

   

  Flash Player help / Flash blocks player Internet Explorer | Windows XP, Vista

  http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-crashes-Internet-Explorer.html

   

  Flash Player Help / Crash when leaving the browser page | Flash Player

  http://helpx.Adobe.com/Flash-Player/KB/crash-leaving-browser-page-Flash.html

   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

   

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.