capture/LSP/nolsp/wsp_patches.cpp:1313

Similar Questions

• ASSERT in LSP

  • Iexplore.exe
  • assert in LSP
  • g_socket_data. RESEARCH (S) == 0
  • capture\lsp\nolsp\wsp_patches.cpp:1313

  That's what I get when I try 2 play vids on syfy.com & BBC corporatesolutions what can do 2 get cured of this problem. Thanks 4 any help you can give

  Hello adampatterson,

  You can download (free) MalwareBytes link: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572
  .html? tag = mncol install, Update can do a scan of your system to ensure that it is indeed clean. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Important update fails several times for Service Enhancement Pack - gives "WindowsUpdate_00000783" "WindowsUpdate_dt000" with 783 an unknown error.

  Service Pack1, kept getting this error, should upgrade to service pack 2 (for Vista) - still getting this error. Somewhere, I found referance that this update has to do with some features of Internet Explorer. Could be as this box appears on occasion:
  'ie.xplore.exe '.
  "Assert in LSP.
  "g_socket_data. Lookup (s) is 0 "
  'capture\lsp\nolsp\wsp_patches.cpp:1313 '.
  My choices are to quit, retry, or ignore
  I click on cancel or ignore (depending on my level of frustration) and should do so several times before the box disappears. Then, everything continues as usual.

  I don't see any other negative effect of this failure of the update or the pop up box (they can not yet be linked).

  Hello old dad,
  Thank you for writing to Microsoft Vista answers Forum.

  Try the following steps:
  1. first of all, I would like to ask allows you to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.
  2. you are trying to perform the optimization of the Internet.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;936213
  3. If you have Internet Explorer 8, try to uninstall Internet Explorer 8, and then try to run the update.
  4. you can also try the following article below for General windows update issues.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;822798
  5. try to disable security software during execution of the update of Windows.
  Let us know if it helps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• 1065984 error during installation or capture with sp4 4.6 HPDM

  Hello

  Yesterday, I did the update to sp3 HPDM 4.5 to 4.6 sp4.

  Now, I can not install image of wes or capture on my computer thinclient t5740e.

  Can I install the update agent, the agent is the last (4.6.3660.21244).

  This newspaper to install and capture (with the french):

  Install:

  2014-11-13 14:08 mapping of the repository to: master repository
  2014-11-13 14:08 sent the job to the managed devices management gateway
  2014-11-13 14:08:04 the task has been retrieved by the agent.
  2014-11-13 14:09:09 [error code: {0}] [Module: {1}] [category: {2}]
  2014-11-13 14:09:09 [error details]: \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\wins\ImageTask_XPE.cpp@286: cannot download the image customer kit.
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@601: cannot download the image map file, file name: toolsConfig.xml
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@560: cannot download the mapping file.
  .\port_layer\ftpclient\fileclient.cpp@179: could not get the remote file LocalDir:C:\,RemoteDir:\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping,Name:toolsConfig.xml
  .\port_layer\ftpclient\ShareFolderClient.cpp@442: could not get the size of dir.
  .\port_layer\file_io\dirfuncs.cpp@845: failed to get the data from the file.
  .\port_layer\file_io\filefuncs.cpp@86: could not get the data of the file & colon;\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping\toolsConfig.xml
  .\port_layer\file_io\filefuncs.cpp@84: the specified path is not found.
  2014-11-13 14:09:09 failed to run the common task.

  Capture:

  2014-11-13 16:21:43 sent the job to the managed devices management gateway
  2014-11-13 16:21:47 the task has been retrieved by the agent.
  2014-11-13 16:22:51 [code error: {0}] [Module: {1}] [category: {2}]
  2014-11-13 16:22:51 [error details]: \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\wins\ImageTask_XPE.cpp@118: cannot download the customer kit.
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@601: cannot download the image map file, file name: toolsConfig.xml
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@560: cannot download the mapping file.
  .\port_layer\ftpclient\fileclient.cpp@179: could not get the remote file LocalDir:C:\,RemoteDir:\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping,Name:toolsConfig.xml
  .\port_layer\ftpclient\ShareFolderClient.cpp@442: could not get the size of dir.
  .\port_layer\file_io\dirfuncs.cpp@845: failed to get the data from the file.
  .\port_layer\file_io\filefuncs.cpp@86: could not get the data of the file & colon;\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping\toolsConfig.xml
  .\port_layer\file_io\filefuncs.cpp@84: the specified path is not found.
  2014-11-13 16:22:51 cannot run the common task.

  Please, help me! I don't know what I can do.

  Best regards.

  It seems that the shared folder was not well configured.

  Could you please download the controller.conf under masterrepository folder and take a screenshot of the master repository configuration dialog box?

• CPP-101 error

  Hope someone can shed light on this problem. He does not for a while, but every time that I reboot and bring the first Pro CS6 aware I click Preferences only to receive an error [.\.\src\LegacyTime.cpp-101] and then Premiere Pro stops and cannot be restarted after the computer restarts. It was good not so long it y a. checking different suggestions on the Internet with no resolution. I have 12g of RAM and enough free space on the hard disk. One option I think to do is to reinstall the program. Thank you all.

  Concerning

  Thank you gentlemen responding.

  The full error message appears as follows:

  (Premiere Pro has encountered an error.

  [.\.\src\LegacyTime.cpp-101])  -I then click on the button continue and the window pops up.

  (Sorry, that a serious error has occurred which requires Adobe Premiere Pro stop.) We will try to save your current project). -To were Premiere Pro closes and the only way that I restart the first is to restart the computer.

  My Premiere Pro cs6 is currently updated with version 6.0.5 and supported by Tiffen DFX v3 & ProDad Mercalli 2.0 plugins 3rd party. My system is a Windows 7 Ultimate SP1, processor Intel Core i7 950 @ 3.07 GHz 3.06 GHz, 12 GB RAM, 2 display adapters - a Nvidia GeForce GTX 260 & a Nvidia GeForce GT 610 main card.

  The source of the layer footage is DV 8 year tape digitized to 720 x 576 (1.0940) 25.00i fps, 48000 Hz - stereo. It is an AVI PAL 4 x 3. I used a small program to capture images because it seemed that Premiere Pro could not do it gently. That is to say: the images read in a slow and jerky action on the timeline. The codec used to capture the images is xvid. AVI.  I think I just tell me the cause of the problem.

  Before with the project under troubleshooting, I loaded a previous project with 1920 x 1080 H264. AVI movie that worked perfectly with Premiere Pro the I went back to the project that I have'm having trouble with and the problem arises again so I think that my problem lies in the xvid codec I used to capture images. The strange thing is that I can change it on the timeline and export using Adobe Media Encoder without problem, the only hiccup I get is when I try to put a Rolling Shutter effect on a clip and first cannot show me the result in real time for which it can with the 1920 x 1080 H264. AVI video. Please ignore this question because I am very sure that I solved the problem while typing this message. I hope this helps others who may have a similar problem. Thank you.

  Concerning

  Hans

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• Upgrades to IOS 10 and lost the screen capture feature

  Previous IOS versions allowed me to do a screen capture using the home and power buttons, but in 10 IOS it no longer works. Why?

  It still needs work. It does for me. However, the change in the way that the button Home construction seems to have caused the calendar problems for some people. Try pressing the power first and now button, and then press the home button.

• iPhone 5 s 10.0.2 update cannot use image capture

  I have a mac pro running 10.6.8. Since I upgraded my iphone 5s today 10.0.2, I am unable to use Image Capture on my mac to transfer your photos, iphoto does not work either. I get a message on my phone to the computer I chose to 'trust', then I get an error message in the Image Capture in saying that I have to enter a password on my phone but the password is not displayed at the time.

  Hello pwexford,

  Thank you for using communities of Apple Support. It is my understanding that you were unable to use transfer pictures from your iPhone to the Image Capture. It is very important to save valuable images of your phone. I want to make sure that you are able to transfer this content correctly.

  His expected behavior to be prompted for a password if the phone is locked. Please, try the following steps.

  1. Connect your device to your computer, and then turn on the unit.

     If the device is locked with a password, enter it.

  2. In the Image Capture, select the device from the list of devices.
  3. Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list or as icons to change the size of thumbnails, or to rotate or remove images.
  4. In the pop-up menu to import to, choose where to save images or what application to use to open the image.
  5. To import only some of the photos, select the photos you want, and then click Import. To import all the photos, click Import all.

     Choose AutoImporter menu drop-down ' connection opens this [device] ' to transfer images from a device to your computer whenever you connect it to your computer.

  6. Select "Delete after import" to remove parts of the instrument after transfer to your computer. You can also select individual items on your device, and then press Delete on your keyboard.

  Image capture: Image transfer and other elements of your device

  Have a wonderful day!

• Image capture will not work with Scanner

  Hello

  I have an Epson Perfection V550, which worked until I upgraded to Sierra. Now, although showing also installed and available as a device of Capture of Image, I get nothing more than Capture of Image that "waiting for scanner. It has been suggested that I reset via picture Capture TWAIN devices, but there is no other choice via the file menu.

  What can I do?

  Thank you!

  Gregg

  Because of the preferences > printers and Scanners, the open scanner work?

• PDF Image Capture files

  Since the update to Sierra (although I can't say that this was the cause of the problem), I have a problem when parsing and saving documents in PDF format using the image transfer application. A PDF file is created but when I open the pages are naked with perhaps only sometimes visible top line (and which appears at the bottom of the page!). This problem occurs only when I choose the PDF format; If I choose to save as an image file (PNG, for example), it works fine.

  My printer driver is up to date and if I use software of third parties (e.g., HP Scan) this problem is specific to the application of Capture of Image so I can create PDF files successfully.

  This problem occurs on my iMac Mini and Mac Book Pro which have been updated for the last OS of Sierra

  You see the problem even if you scan to PDF using Preview?

  I use an excerpt instead of the Image Capture to do this and he continues to work very well in the Sierra AFAICT. I'll try with the Image Capture when I get the chance, just to compare. He used to work as well, but I've not scanned with it in quite awhile.

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• Image Capture App combining OS Sierra files

  Hi I have a problem with the application of Capture of Image integrated into the Apple OS since the update to the Sierra. Before the update I scan documents into the feeder of my MFP as a PDF file and select 'combine them into single document option. of course, I get a PDF file with the scans in. I would then analyze an other internal documents and again, I would get another PDF document with them in.

  Since the update OS Sierra and using the same settings as the first PDF file is created in the end, however when I go to scan the next set of documents Yes it creates another PDF file with these files in but she also adds the previous set of scanned files to the same doc. This continues for each subsequent set of scanned files. The only way I managed to prevent this must either exit the Capture Image soft after each set of scanned documents or in the test results window, select the magnifying glass next to the analysis the folder Apps of Capture Image temporary Doc and send these files to the trash. It's as if the app is no longer clearing Temp files between scans automatically.

  Details: OSX El Capitan of OS Sierra. MFP to use Lexmark XC2132 Via USB 2.0 connection. Image Capture worm 6.8

  Hi Simon.B82!

  I see you have a problem with the scanning of documents in the application of Capture of Image.  I know it's important to have your applications work correctly, and I'm happy to help you.  To further isolate the issue, please create a new administrator account on the Mac.  A test to see if the problem of scanning is always present in the new user account.  Here are the instructions:

  How to test a question in another account on your Mac.

  Thank you for using communities of Apple Support.

  See you soon!

• 7 iPhone very slow camera capture

  Hello world. You already have the iphone Go 7 256 1 week. I find the camera focus speed is acceotable but a bit slower than 6 sec. However, what I find most disturbing is that after I pressed the shutter release button it takesa very long time to capture the image of which lack the coup my kidd or blurry images. I compared it side by side with the iphone6 more. Then 5s snd 5. The results are disturbing. Even my 5 captured images faster 4 years together with a speed more slow focusimg

  Did a reset using itunes on pc NDS installation again and also using recovery as suggested by cat from apple. Always the same. searched on youtube on speed tests and note 2 reports that canera 7 is laggy. Anyone with questions? Is it hardware or software? Please notify. BTW also on the latest ios 10.0.1

  Sounds like a problem with the hardware for me since it has been restored. I suggest you to take over an Apple Store for testing. I have a 7 128 GB and my camera is not giving me any questions.

• Image capture will delete everything?

  Capture images on Mac is a convenient and popular tool to delete photos on your iPhone.

  But when I start IC, what I see is a single mass of photos assigned to my phone. No albums or other ways to organize photos visible on the phone itself are visible here.

  So the question is, if bulk - delete you photos to the help of IC, who is also going to delete things from your phone as Favorites or other albums, you either created on the phone or that have been created by another application (for example Instagram)?

  EDIT:

  I confirmed that the removal of a photo by IC will remove other albums on the phone in addition to the camera. I tested with the Instagram album open on my phone when deleting an image in IC I know has been stored via Instagram. Of course, he immediately disappeared for the phone album. Bad luck.

  The bottom line is I'm emptying my camera, but I don't want things to disappear from the others, these albums more carefully organized on the phone.

  It can only access the photos and videos from the camera to roll. Items further albums cannot be manipulated by Capture images or Photos.

• image capture does not recognize my iPhone when I connect to my mac?

  I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

  Hello rosrich,

  If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

  If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

  Image capture: transfer images and other elements of your device

  Thank you for using communities Support from Apple. Nice day!