Assign a policy to a custom data center

Similar Questions

• vRealize operations - custom data center

  I have created two centres of custom data in the vRealize operations 6.1 Standard edition (each consisting of two Clusters of ESXi). After the creation of the 'health', 'Risk' and 'Efficiency' show gray question marks in the Statute, but the alarms is correctly filled. When I log out vRealize operations and you connect again (a little later) my custom data centers has disappeared. Someone has any idea how to solve this problem?

  Thank you

  Roland

  The grey '? "badges at the start are expected.  (1) the created object is new. (2) vROps needs time to aggregate scores badge for multiple groups added to your custom data center.  It is therefore quite normal.

  As to why they would disappear, I have no idea, but here are a few things to check.  Check under explore the inventory and see if your custom data center still exists as an object.  If this is the case, make sure that you connect back with the same user ID that you have created with.  Make sure that the user has permission to view this object.  Preferably, use admin if possible.

• Custom field data center-VM

  The difficulty to fill the property column in the report.

  Here is my code:

  $report = @)

  $csvfile = "D:\Get_DC_Perms.csv".

  $datacenters = get-data center | name sort

  ForEach ($datacenter to $datacenters)

  {

  $vms = get-vm -location $datacenter

  ForEach ($vm to $vms)

  {

  $ReportObj = "" | Select 'Data center', 'Virtual Machine', 'Property DL'

  $ReportObj. "' Data center ' = $datacenter.name

  $ReportObj. "' Virtual Machine ' = $vm.name

  $ReportObj. "' Property DL ' = {$vm. CustomFields}}

  $Report += $ReportObj

  }

  $report | Export CSV $csvfile -NoTypeInformation

  Thank you

  This should not be a problem.

  Have you tried the script from the prompt PowerCLI?

  Maybe stop/start prompt PowerCLI or the GUI where you start the script.

  If this doesn't help, I'm afraid, that I am at a loss

• Deliver the addition of new set of switches stacked as an extension to the network in another data center building

  Hello

  I was wondering if someone can help me, I am a humble sysadmin with no real network admin training.

  I have the following Setup to work in a rack in our data center.

  2 x Dell Sonicwall NSA2400
  2 x stacked switches Dell Powerconnect N5524

  A Sonicwall is connected to each switch (active-passive)

  Every Dell server has 2 x nics in servile failover mode, one of each network card connected to each switch

  This is done to allow a full redundancy for network, cable, switches and Firewall interface cards. It works well.

  The above mentioned rack is now full and we ordered a new rack that is in a different datacenter of construction on the same site. We decided to buy another set of stacked switches and _extend_ (no battery) these via optical SPF on the rack on the other.

  The idea is that we still have the switch fault tolerance but link to two grids through 10 GB. The new switches are 2 x Dell Powerconnect N2048 and have been implemented stacked with any connected devices.

  I have implemented SPF ports on both switches to be a junction ports and connected the two sets of switches, unfortunately our site went offline, our alert went ballistic and no servers could not talk to each other!

  Quickly, I unplugged the new switches and after a worrisome 10 alerts deleted seconds and the site is back online.

  I don't know why this has happened and reflected on the STP parameters that my googleing seem well. I don't know I'm missing something basic.

  I'll post a framework and a diagram in a follow-up post

  Which is no doubt tree covering the shot weight. It is a good idea to assign lower priority to the main switch. Generally, your root switch will be the one that plugs into the firewall. Definition of priority on the main switch to 4096, it will make the root switch. So as you work your way through different layers of the network, increase the priority. Access layer switches can be left by default.

  I would also check the physical connections for loops. In situations where you have multiple connections switch, make sure that these ports are configured in a SHIFT.

  Keep us informed.

• Report on the use of data store based on cluster (not data center)

  Hello

  I want to create separate HTML reports for each cluster I have in my virtual Center. I've created a script, but it doesn't seem to work. This script creates outputs separated from HTML based on clusters, but all the files have the same data, i.e. all data that are available in the Vcenter stores. How can I separate them with regard to the cluster in which they are assigned to the place?

  ===========================================================

  # Functions for math operations.

  usedspace {} function

  Param ($datastore)

  [math]: round (($datastore.)) CapacityMB - $datastore. (FreeSpaceMB) / 1024,2)

  }

  function dscapacity {}

  Param ($datastore)

  [math]: Round ($datastore. CapacityMB/1024,2)

  }

  freespace {} function

  Param ($datastore)

  [math]: Round ($datastore. FreeSpaceMB/1024,2)

  }

  function {percentage

  Param ($datastore)

  [math]: Round ((($datastore.)) FreeSpaceMB/1024) /($datastore.) CapacityMB/1024) * 100) / 1.2)

  }

  #Connect to Vcenter

  to connect-viserver-Server < myservername >

  # CSS stylesheet

  $a = '< style >.

  $a = $a + "BODY {background-color: Gainsboro ;}}.

  $a = $a + "TABLE {border-width: 1px;}. border-style: solid; border-color: black; border-collapse: collapse ;} »

  $a = $a + "TH {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black; "{background-color: Blue}".

  $a = $a + "TD {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black; "{background-color: PaleTurquoise}.

  $a = $a + ' * {do-family: Verdana, Arial, Helvetica, without serif;} '. font size: small ;} »

  $a = $a + ' < / style >.

  # get a list of clusters

  $clusters = get-cluster

  # Create HTML report for each cluster

  foreach ($cluster in $clusters)

  {

  $datastores = get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

  $Report = @)

  {ForEach ($datastore to $datastores)

  $row = "" | Select-object Datastore, Datacenter, CapacityGB, UsedGB, FreeSpaceGB, PercentFree

  $row. Data store is $datastore. Name

  $row. Datacenter = $datastore. Data Center

  $row. CapacityGB = dscapacity $datastore

  $row. UsedGB = usedspace $datastore

  $row. FreeSpaceGB = freespace $datastore

  $row. PercentFree = % $datastore

  $Report += $row

  }

  $Report | Tri-objet-property PercentFree | ConvertTo-Html-head $a | Set-Content "D:\VMware\Scripts\Reports\Storage\$cluster.html".

  }

  ===============================================================

  To recover the cluster data warehouses, you must change the line:

  $datastores = get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

  in:

  $datastores = $cluster | Get-Datastore. where {$_.name - notcontains 'local'} | Sort the name

• Protection and confidentiality of customer data

  Nice day

  Don't know if it's the right place, but the summer to research on the web without a clear answer.

  When a company decides to move to the cloud (be vmware hosted or not) what are the regulations regarding customer data stored on a company third.

  How he handles the case if the customer decides not to continue with its data on the business hosting?

  Thanks in advance

  While each cloud provider has different terms and policy around customer security and confidentiality of the data, you can locate the VMware vCloud hybrid and concretely political Service in our terms of Service and privacy policy agreement. Those who can be found here:

  VMware vCloud hybrid Service terms of Service: VMware vCloud hybrid terms of Service of Service | United States

  VMware privacy policy: privacy policy | United States

  The policy, in addition to the above agreement and our Description of Service (link below) also face the scenario at the end of the service to the customer and the customer's data processing.

  Description - VMware vCloud hybrid Service Department: https://www.vmware.com/files/pdf/vchs/vCloud-Hybrid-Service-Service-Description.pdf

  A company may be subject to specific external industry or Government regulations according to the data of the company intends to host. It is the responsibility of the company to ensure compliance with these regulations.

• Liquid: Elements of custom date sorting Webapp

  I would like to be able to sort a list of items in web app before a custom date. It is a list of events with dates associated with them. They all get published on the same date, but they have dates of events unique to each of them for when the event occurs.

  That's what I have so far:

  {module_webapps make = "collection" filter = "closed" collection = "warroadEvents" id = '17654' itemId = "122469" hideEmptyMessage = "true" sortType = model "datereverse" =""}

  {% for %} warroadEvents.items test

  {% assign todaysDate = globals.site.dateNow | date %}}

  {% assign eventDate = event. ['Event date'] %}

  {% assign dateOrder = todaysDate | less: myDate %}}

  < div class = "col - xxs buffer event-legend" >

  < a href = "{{event.url}}" > < img src = "{{event. {{[' banner image ']}} ? Action = thumbnail & Width = 825 & height = 275"alt =" {{event.name}} ' class = 'img-sensitive' > < / a > "

  < a href = "{{event. {{[' e split url']}} "target = '_blank' class ="ticket float-right"style =" "margin-top: 1.5em;" > "

  < img src = "/ _images/layout page/buy tickets com Alt PNG" = "" class = "ticketimage" > "

  < /a >

  < h2 > {{event.name}} < / h2 >

  < p > < strong > {{event. [' Event date '] | {{Date: "dddd"}}, {{event. [' Event date '] | {{Date: "MMMM d"}}: {{event. {{[' Start ']}} < facilities > < / p >

  < h4 > < a href = "{{event.url}}" > see more details < /a > < / h4 >

  < / div >

  {% endfor %}

  I created 3 variables. One that stores the date today, another that contains the date of the event from the web application element, and a third that subtracts the two to find the difference. I think that I am part of the path. I don't know how re - sort my for loop, which indicates the date at which rises earlier first and so forth.

  Custom filter solutions are one of the major limitations with this stuff at the moment.

  Basically, you can't.

  While you might wrap the elements in an if... And don't date matching and comparing and not show them etc. you will not be able to sort or order them on this basis.

  And with everything you do, you can do so only within a scope of a total of 500 items or page pagination. By paging stuff page creates a problem where it will show say 24 per page and lets say 3 on each page are not match you get 24 rendering paging still but 21 presented on a page. It creates some funky results a bit.

  I'm going to this topic for some time now and we need some changes to the liquid to make it more viable in the scope of how BC spits basic data. So you can do what you really do.

• P2V between data center

  Hello.

  I have 30 intel physical server in A data center.

  I need to virtualize the 7 new physical server but in Datacenter B.

  I have more or less 3 TB of data. I have a very small WAN between domain controllers (2 Mbps). The distance between domain controllers is 200km.

  What is the best way to P2V them between domain controllers?

  Can I use no vmware tools?

  Thanks in advance.

  Well, choose only one way depends on basically the size of the virtual machines resulting and the time you can afford to stay offline when convertion/move files.

  If you need reduce downtime to a minimum, also consider a tool such as PlateSpin Migrate ( http://www.novell.com/products/migrate/), it features ha like Live transfer or synchronization of server to replicate the servers and keep them in sync if migration takes too long.

  Maybe you can start with a first copy made in offline as Andrea said you and then sync source and destination through 2 Mbit link, once that you moved the replica to the destination datacenter.

  Kind regards

  Luca.

  --
  Luca Dell'Oca
  http://www.vuemuer.it
  [Assign points for a useful answer is a way of saying thanks]

• is there a way to force/assign a vcenter for some user data store?

  1. is there a way to prevent a user from vcenter to use only a certain data store and not be able to see others, especially when you create a virtual machine through the wizard and seeing all the storages of data available on the host? I don't give any store of data privileges and yet I have users who are still able to see the list of data store when creating a virtual machine through the wizard.

  2. is there a way to only display the someones pool of resources as the parent tree in vcenter? So, if I assign someone to vcenter - & gt; Datacenter - & gt; Home - & gt; pools of resources - & gt; Tom...

  When tom connects to vcenter he sees only the tom as a parent resource pool in the tree and nothing behind that.

  The problem that in my view is the authorization that you had Setup at the top of the data center that spread down to allow you to create the new virtual machine.   The spread may have given you a read access for the storage of data below.   I don't know this for sure, but it's something to try.

• Custom data type

  We use a custom data type container and add variables to use in the sequence inhabitants.

  It seems that the field of the local variable names having to match domain names that they have seized originally in the custom data type container.

  We want to reuse the custom several times in the sequence container for data type and would like to have descriptive field names of their use, which changes throughout the sequence.

  Is it possible to just rename the names of the fields of a local variable is of the type, data type container custom, while maintaining the field names the original custom data type container?

  With the help of TestStand 2013

  Thank you

  Hi CC57,

  I also recommend trying a templateVariable. You can use this to create a container with a particular name that you can copy in various places in the variable pane and change the names of the properties of confined there.

• DLL custom data type

  I try to use a DLL in LabView that talks about an acquisition card. One of the functions requires a custom data type (MID2250_MDConfig_t) that LabView does not support by default. It is defined in the C header file as follows:

  typedef struct
  {
  int CoordsX;
  int CoordsY;
  } MID2250_PointCorrds_t;

  typedef struct
  {
  MID2250_PointCorrds_t ULPoint [4];
  MID2250_PointCorrds_t BRPoint [4];
  unsigned short u32SADThresholdValues [4];
  unsigned short u32MVThresholdValues [4];
  unsigned short u32SensitivityValues [4];
  } MID2250_MDConfig_t;

  Is there a way I can integrate this data type in LabView correctly. I saw people talking about wrapper dll on this forum but I'm a bit confused as to who. Can I create a similar cluster in LabView and pass it to the function using "node of the library call?

  abdel2 wrote:

  I try to use a DLL in LabView that talks about an acquisition card. One of the functions requires a custom data type (MID2250_MDConfig_t) that LabView does not support by default. It is defined in the C header file as follows:

  typedef struct
  {
  int CoordsX;
  int CoordsY;
  } MID2250_PointCorrds_t;

  typedef struct
  {
  MID2250_PointCorrds_t ULPoint [4];
  MID2250_PointCorrds_t BRPoint [4];
  unsigned short u32SADThresholdValues [4];
  unsigned short u32MVThresholdValues [4];
  unsigned short u32SensitivityValues [4];
  } MID2250_MDConfig_t;

  Is there a way I can integrate this data type in LabView correctly. I saw people talking about wrapper dll on this forum but I'm a bit confused as to who. Can I create a similar cluster in LabView and pass it to the function using "node of the library call?

  Since the tables are all fixed size (and not huge), they really are inline in the structure. This means that you can simulate a cluster containing many elements inside because it is the elements of the array. The first Point of the UL would be a cluster containing 4 cluster with each two int32 in it. Ditto for the second element. The third is a cluster with 4 uInt32 and so on.

  Then configure the setting to adjust the type and thread this cluster, and voila.

• How to create a custom data type

  Hello

  I'm using Labview 2009 and I am trying to create a custom data type and link it to the global variable that will be deployed in cRIO 9073. I couldn't find a method to achieve this. Please suggest a way to do this.

  Thank you

  Guilhem

  Right-click on a control and go to advanced-> customize.  This will open the control editor.  Change the type of a control to a Type def.  Customize if necessary and save the control.

• Where to define new custom data types?

  Hello

  In the past (TS 3.5) I created our own range of custom type file that has been used

  to store the new data types and then referred the case to other colleagues. The file would be

  stored in the ...\Program Files\...\User area.

  My question arose because we now use the TS 4.1/4.2, which is no longer a separate

  Directories of NOR and user in \Program Files.

  Because now I want to change an existing custom data type, I find that our range of custom type has

  fallen by the way side, forgotten.

  Even though I can see the custom data definitions within the sequence of type files that use

  custom data types, which means that I can edit them locally, I intend to return to

  a range of custom type, i.e. comprehensive definition.

  What is the relationship between the definitions in a range of custom type and custom data

  definitions of type of a file of sequence?

  When a palette to update file a file of sequence?, who takes over in the event of conflicts?

  is a really necessary sequence files palette file if they are separated by using the same custom data type

  can update the other? What is good practice when defining custom types of data?

  Thank you

  Gary.

  Hey guys,.

  This is a very interesting thread, and I've got everything right, in heart, with advice given so far. I just wanted to offer some additional tips on the conflicts of kind - with more response, the initial question concerning the definition of what is priority in case of conflict.

  It is important to note that TestStand uses type names and version numbers to identify the different types. It is also important to note that when you use a definition of type of customers within a sequence, the sequence (.seq) file containing the sequence will keep a copy of the type definition. This greatly facilitates distributed sequence files. However, it also opens the door to potential conflicts type.

  TestStand allows only one type of unique name to be loaded into memory at any given time, so that it uses the number of versions of the type to try to resolve these conflicts automatically. For example, TestStand can be configured to load any type is the largest version number (note that this can be changed via the tab Preferences dialog box Options of Station).

  All this information and more are found in the following tutorials...

  Conflicts and TestStand Type Versioning

  How to make a Type of custom step?

  Thanks for your time. I hope this has been helpful!

• Causing problems of custom data type to deploy the shared target RT variable

  I seem to have some difficulty in using a shared variable published network created from a customized data type when it is deployed as an executable on a target of cRIO RT.  I'll start by describing why I think that this is the rub.  I created my RT VI in the LabVIEW (LV 2012) development environment and everything works fine.  This VI is quite simple, because these were quickly devolved into an exercise in debugging.  The RT VI begins by simply flashing the LED to a couple of times and then starts a loop simple acquisition to read some values out of the material using the analytical engine (while still flashing the LED of the user).  After reading the material, the values are grouped in a cluster and written in a shared variable published to the network defined by a custom control type def.  The custom control contains five floats double precision.  If it's important, the RT cRIO system hosts the shared variable in this case.

  So I have that deploy in the development environment, and everything works fine.  The LED flashes merrily along, telling me that the program runs correctly.  Running a VI host who reads the shared network has published variable gives the desired result.  Everything is good.

  Now, I want the cRIO system to run this simple program by itself at startup.  I build, set it as start VI, deploy it, and then restart the cRIO target.  The LED never flashing... the VI doesn't seem to work.  I'll spare you the major part of the work of debugging and access to the end.  I basically "diagram Disabled" various sections of the code up to the VI began to run correctly in an executable file.  I kept reducing the size of the disabled code until something has been disabled: the writing in the shared variable for the custom data type.

  So, I guess my question is this: are custom data types defined by type def would be personalized orders authorized executables to RT?  I read through the cRIO Developers Guide, my book of development in real time course of NOR and the white paper using shared Variables and I see nothing that forbids it.  I know that there are things not allowed in the executable files that are allowed in the development environment (property nodes façade, dialogue live, operating system specific calls, etc.), but no mention of the shared variable type custom data.  Any ideas as to why my VI is running in the development environment, but does not update unless I have delete the entry on the published network variable shared?

  Thank you in advance for your help!

  You must disconnect the data types of variables and then recompile. You can find it useful to keep on disk, a copy of the original lvlib.

  Don't know if this is a bug or not. It was suggested by someone in the forum that putting the ctl files in the right position (the disk? in the draft?) would allow the rtexe start; I did a quick check and it didn't work then I dropped the tests more far.

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer