Assign the resource after reconciliation trust

Similar Questions

• Error-1074118631 after driver update "the name of the resource is not attributed...". "PXI-6562

  I just updated my version 1.5.3 to 1.7.4 niHSDIO driver and now the device, a PXI-6562 is won't boot. I get the following error. The VI is suspended for 30 ~ 60 s attempt to initialize before the error occurs.

  Code: - 1074118631

  Message: niHSDIO Init generation Session.vithe name of the resource is not assigned to an instrument supported by NOR-HSDIO.

  The device worked fine with the old driver.

  Windows Device Manager indicates that everything is installed and working.

  I tried to write a simple VI by using new versions of the screw HSDIO and recreating the I/O resource menu drop-down.

  The resources dropdown lists the name as "PXI1Slot2".

  I can see the device in MAX thanks its location listed as "chassis: 1; Slot: 2 "

  The PXI-6562 has 2 LEDs on the front panel for 'access', 'active'. No lights during an attempt to initialize.

  I tried uninstalling the driver in Windows, reinstalling and restarting: same problem.

  I tried to use the device in Signal Express, and it produces the same error.

  I use LabVIEW version 8.5 and Signal Express 2.5.

  

  

  

  

  Does anyone know how to fix this?

  Thank you

  Arthur

  Hey Arthur,.

  You should also do a repair on the NOR-DAQmx driver for example, after you have repaired HSDIO. Let us know how it goes. Thank you.

  Kind regards

  DJ L.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• The star rating does not appear on the image on the film after being assigned in the develop module. How can this be repaired?

  The star rating does not appear on the image in the film after being assigned in the library or development module. He uses appears before the last update.  How can it be fixed?

  Hi annl98929431,

  Greetings.

  Make slide film and make it appear larger than it is now.

  • https://helpx.Adobe.com/Lightroom/help/view-photos.html

  Concerning

  Rohit

• After repeated close features, I still get the VISA error "the resource is valid, but the VISA cannot access to this.

  I'm currently building an application on a device cDAQ, which involves the use of a scale. The scale uses the RS232 communication, but is connected to an RS-232 adapter / USB and plugged into one of the USB ports on the cDAQ (COM 10). I am contacting the scale using the basic functions of VISA: VISA Open > VISA Read > clear VISA > VISA family. I created an application using the scale that worked correctly, but now whenever I try to access the scale - whether through MAX, a VI or a version rebuilt in the same application - I get the error "the resource is valid, but VISA can not currently access."

  The scale has three options for data transmission: "No. Data Output" "data output continues" and "Normal output when you press the Print button. I have it set to "data output continues, I don't know if this information is useful.

  The c-data acquisition is a NEITHER cDAQ-9138

  I have tried several things to get rid of this error:

  -Restart the cDAQ

  -Functions "Close VISA" running repeatedly on COM Port

  -Completely unplugged and powered off the coast of the scale

  -Connect the scale on a different COM Port

  -Repeatedly in the course of execution 'unblock port' VISA functions on COM Port, as a colleague has suggested that perhaps the problem

  None of them have worked.

  Does anyone have any suggestions of reliably, get rid of this error?

  I have attached a vi showing how I try to read from the device. Any help would be appreciated.

  A colleague of the Department of electrical engineering of the company has solved the problem. The scale has a material defect that will constantly try to communicate with a VISA session, even if the session is closed for a long time on the computer. Essentially, the VISA session on the scale does not, stop even if she ends up on the computer. He says it's a mistake he has not seen in 3-4 years.

  How to fix the error is to unplug everything from the balance and leave it unplugged for at least 30 seconds to make sure that all of his equipment off completely. When you plug the scale, it will be sensitive to a new VISA session. I tried it and the balance works again through VISA.

• BDE is unable to add resources after the new installation

  Hey guys,.

  Having trouble with BDE 2.1 and get working serengeti. Looks like VHM is having problems connecting to vcenter. Here's the exact error.

  Location : /Opt/Serengeti/logs/VHM.log

  Message : 18:24:21.671 April 21, 2015 * VHM: failed to connect to vCenter (class java.io.FileNotFoundException): / tmp/keyStore (no such file or directory)

  18:24:21.672 April 21, 2015 * VHM: couldn't get vCenter connection through any protocol

  18:24:21.672 April 21, 2015 VHM: temporarily lost connection to vCenter

  Location : /Opt/Serengeti/logs/Serengeti-boot.log

  Message: E, [2015-04 - 21 T 18: 22:39.991825 #8536] ERROR -: Serengeti Web Service didn't generate the uuid in the file serengeti.properties in 5 minutes.     This is probably a VC connection problem, please consult /opt/serengeti/logs/serengeti.log

  Serengeti.log is not something useful spit.

  
  

  Anyone seen this before?

  
  

  Thank you!

  BDE VAPP must be deployed in the resource pool of top level under a pile of vCenter, otherwise, you will see the error log. Please kindly check it out.

  Thank you.

• Assign the role automatically to newly created users

  Hello everyone

  We have a requirement in OIM 11 g R1 where whenever a new user is created (it can be manually or through reconciliation), a specific role shall be automatically allocated to him.

  Can someone provide me with documentation (or) some examples on how to do it? After some research, I realized that the best method is to create a preprocessor Manager that will affect the role. Any suggestions or some blogs will be greatly useful.

  Thanking you

  Sam

  You can create a role in the IOM based on the attribute of the user. Let's say that you want to assign the user a role based on its location. Then you must create multiple roles, such as: US, CA, IN... Then, for each role, you assign a rule for membership

  Country == "". IOM automatically check the attribute of the user's country and affect a relevant role.

• The issue of reconciliation with TFTP-HR and AD.

  We have recently implemented by IOM using a PeopleSoft HR system as reliable source and target AD as one of the systems. When we did the first reconciliation (load) load us data in IOM by using the scheduled task of PSFTHRTrustedUserRecon. This profile of IOM's data correspond to what was in HR. everything is good so far. Then we ran the scheduled task 'AD user target Recon' to load data of the AD in the AD user resource objects. This is where the problem comes. Profile data user of the IOM are good, but the user AD resource object data have many mistakes: incorrect addresses, wrong numbers etc. Is there a way to get the user profile data (close) eliminated IOM for resource AD user objects and so on AD.
  
  Thanks in advance for any help you can provide.

  You can create a scheduled task to perform the updates. After you run the two targets recognition for the resources of the user, follow these steps:

  For each user, enter their profile of IOM values. Find the instance of the user to active directory and using the setProcessFormData, you can update all the values on the form of course AD the user user. Any area that has an associated task 'Updated' will be triggered and update the information Active Directory of the user in the target.

  Piece of cake :)

  -Kevin

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• Satellite R830-1GZ - CPU usage high (> 25%) and increase in the speed of the fan after reactivation

  Hi all

  The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I noticed that when this produces the system interrupts - delayed appeals procedure and Interrupt Service routine appears in the resource monitor > CPU > process and seems to explain the increase in the use of the processor.

  Any ideas on how to solve this problem would be most appreciated.

  I use a Toshiba Satellite R830 1GZ with Windows 7 (64-bit). This problem will not occur when I use the same mouse with another laptop (Dell with Windows XP).

  Thank you very much.
  CM

  > The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I think that the process that controls the mouse MS WLan does not close properly.
  The system to memorize it and therefore the cooling module begins to spin faster because these processes stressed the central unit.

  Maybe its caused by the mouse driver
  Have you checked if there is an update to the driver?

• CPU goes to 100% svchost State takes all the resources on the Qosmio F10

  CPU goes to 100% svchost State takes all the resources. Norton can not find any illegal software. Have tried to list the processes (run... etc.). I get a long list, don't know what to do about this. Anyone out there have some help?

  Hey Buddy

  The same problem here. :( A universal solution is unknown to me but what I do is from the Task Manager. When svchost shows more than 90% of its use I simply stop this stupid process. After having done that, I can use my laptop without any problem and it will not happen again.

  After restarting the laptop, the same thing happens again. I checked some other forums but never found no reasonable explanation how manage this stupid question.

  If someone knows more please let us know.

• Lose the calibration after the calibration step

  This morning, I imported a VBAI State in an existing algorithm and registered as a new algorithm. Then I noticed that I wasn't getting any measure calibrated (not available) in the State imported... or in all the previous States, expect one step of tool Caliper in the first State after the State of calibration. Passes calibration, but regenerated calibration just in case, but no change, I get no action calibrated after the 2nd State. I restarted VBAI... no change. I returned to the old routine... same problem! And, no, I'm not recalling an image in the buffer after the calibration step, but VBAI is as if I do not have a calibration. I am at a loss for ideas of how restore my calibrated measurements, suggestions? BTW, my system resources Manager shows that I've got about 26 calibrations in my system, no chance that older calibrations could have an impact on my current calibration? Thank you, Eric

  Eric,

  We were able to reproduce the problem and the CAR 328907 file. It will be addressed in a future release.

  Thank you.

  Christophe

• assign the external hard disk drive letter?

  How to assign the drive letters of external hard drives?

  Done Windows that after connecting the HD, turn it on.

  There must be a valid and formatted file partition before he gets a drive letter.

  Disk storage/tools/Control Panel/Administrative management control

  -steve

• Find the name of the resource of the SMU-4143 NI

  Hello world

  Is there a way to find the resource name assigned by MAX using LabVIEW? I need to use niDCpower initialize wite channels VI to initialize a session with SMU-4143. This VI asks the name of resource assigned by measurement & Automation Explorer (MAX) of the 'PXI1Slot3' form as input. I'm not sure whether we can use VISA find resources to detect the PXI instrument. If so, the resource to find string exit VISA is a different format. How can I get the name of resource affected by MAX of this? Any ideas?

  You can use a constant DAQmx device name or a control.

  Or you can do deactivation:

  

• Unable to start this program because the "Resources" directory or one of it subdirectories is missing.

  Can someone tell me what to do. It says... cannot start this program because the "Resources" directory or one of subdirectories is missing. Please try to reinstall this program.

  I'm not very stalled on computers and do not want to delete something I shouldn't.

  original title: directory of resources

  Hello

  1 did you change on your computer?

  2. what program you are causing this problem?

  3. when exactly did you get this error message?

  Method 1:

  I suggest you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to uninstall and reinstall the program from the link and check.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program