Lose the calibration after the calibration step

Similar Questions

• I use Lr5 on a PC, working on the Nikon RAW files. Without even touching the images, they lose their shine after a few seconds. Why and how can I keep the liveliness to the origin?

  I use Lr5 on a PC, working on the Nikon RAW files. Without even touching the images, they lose their shine after a few seconds. Why and how can I keep the liveliness to the origin?

  Step 1: Adjust an image in Lightroom, until you are satisfied with its appearance

  Step 2: Use develop-> new preset, select all selections in the new preset dialog box (note: I always uncheck the exhibition here, who should probably be adjusted picture, I'm mostly interested by contrast, vibrance and camera calibration settings)

  Step 3: In the import dialog box, on the right, under appliquer apply when importing, select the preset desired beside development parameters

• NB550D - 10G - do I lose the warranty after change of HARD drive?

  I would like to change the HARD drive in my Toshiba NB550D - 10G for one SSD drive.
  Could someone tell me if I lose my warranty after doing this? I would also like to know evolves from 1 GB ram to 2 GB would indeed lose the warranty?

  Thanks for the help!

  No, I think that you that the warranty would be unaffected if you remove and replace the HARD drive.
  The HARD drive and memory are parts extensible user and replace this part will not void the warranty.

• GSM7224v2 loses the configuration after power failure

  As the topic title says - this device (new for me but flea market) loses its configuration after power off.

  I don't see any button cell within the unit for volatile memory backup. Surely the configuration lives in non-volatile storage?

  I am being dumb and I'm missing something?

  Hi neidlo

  Welcome to the community!

  Yes configuration lives in a non-volatile memory, when it is saved. Until it is saved, it is in RAM.

  When configuring the switch, it is not automatically saved. Using Web Interface (GUI)? A "Save" button should do.

  Please let us know whether or not this was the burden

  Kind regards

• Lose the ability to access Internet after Windows updates published in the last 24 hours

  I lose the internet connection if I install the Windows updates published in the last 24 hours.  I have had access to the internet after restoring to a restore point.   I was able to recreate this problem be reinstall them again.

  Update the example is KB2121546

  Manually install a - alone.
  Reset.
   
  Still have Internet?
   
  Manually install the next one, one.
  Reset.
   
  Still have Internet?
   
  Repeat this until you lose Internet or have installed all updates - what comes first.  If you lose Internet - uninstall that one and install all others (using the same one at a time - at the most method you will have 8-9 for this cycle) then come here and let everyone know what update was kill your Internet connection.
   
  Why?  An update of the example is of no help.  There are 9 updates you could possibly have * if * you were aware through yesterday.  Knowing the SPECIFIC update that is causing your problem would be better for you and those who help you.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• lose the connection to the net after system restore

  I used the system restore and restart the pc after it but I lose the connection to net it gives zero transmission and recived it is a lock on the connection icon and when I try to use repair it gives the error message (windows could not finish repiring the problem because it is impossible to perform the folloing action not to conduct not query tcp/io of the canoe connection parameter)

  There is no problem with the connection that the net works with other PC not mine

  When first I used the net all the me I connect the Caron and its automatic execution

  so why it dosent run now the files make me lose the file how to fix

  When you did the system restore you have lost the connection to the network.

  Create a new connection

  Dale may

• Credential Manager loses the password stored after a certain time

  Hey Microsoft Community.

  I have a small problem with the Manager of credentials Windows under Windows 7, Windows 8 RP, RTM of Windows 8 (have a version of Dreamsparks) and Windows Home Server 2011. When I store connections in the manager like for example to connect to network between machines shares, the manager loses these passwords after a certain time (2-3 days or more). At first I thought that this happens when the computer is rebooted or started because the machines are usually have hibernated in my house - but even when they are not given running loose connections.

  What should I do to fix this? I need the connections, for example for automatic nightly backups.

  Hi StefanSchm,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  I hope this helps.

• Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

  Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

  Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

  -Dov

• VMware ESXi 5.5 and HP ML310e gen8 v2 lose the license and the password after restart

  I've updated my HP Proliant server with the latest drivers and I have the BIOS version is here: VMware Compatibility Guide: search system

  but after I entered my license in vSphere and adding a virtual machine to the host, where I am restart I lose the license, the password to connect to the host (his game empty) and all virtual machines (I have to add them manually and fix the network, because it is also reset to the default setting).

  Any ideas why is this happing? I'm doing something wrong?

  Other info: I have 2 hard drives put in a logical drive (Raid 1) and VmWare log does not work without saying anything...

  Hello

  is it a stand alone esx host? If yes try asking another key on the wmare site

  hp custom image you used to install the esxi?  If not download the latest version of the hp site or vmware and perform a new installation or level and keep the data store.

  also update the firmware of the hp for the later levels site

• Office loses datebook categories after export & import the file dba.

  Hello

  After reading a lot of posts, I can't find any that have reported a similar problem, so here it is.  Office loses datebook categories after export & import of a file of dba.  I use Palm Desktop by Access v6.2.2 and a Verizon Centro.  This problem has nothing to do with the synchronization.  I just exported my calendar of events in a DBA file, import the same file and all event categories have been set to "unclassified".  Is this a known bug, or perhaps, the s/n file includes no category information?

  I'm really curious to know if the dba file (archive date?) contains information catergory.

  Thanks in advance,

  CentroIllinois.

  Hello!

  A bit of a limitation of Palm Desktop.  Before you import the file s/n, manually add the category nanes via change categories and then try again to import the file dba.  Due the category names must be exactly the same spelling and spacing as before when they were exported.

• What happens after the full download? I don't see a program, an icon, or the next steps...

  What are the next steps for open test software after the Download Assistant has been installed?  No instructions for the next steps!

  Biggly2000 try to download a new copy of products download Acrobat installation files | Standard, Pro | XI, X.  You can install the software in trial mode.

• What is the next step after mounting or triming a video? What type of file format to save and what to do after that?

  What is the next step after mounting or triming a video?

  What type of file format must be registered and what to do after that?

  Hi Jeff,

  I use the file-> export-> video rendering.

  If you don't want the Explorer for the first time, the default value is OK for a nice video.

  Stefanie

• After the launch and the release of Cisco close Windows loses the functionality of micro.

  If I run the Cisco close Windows application, I lose the microphone feature. I understand from the client accesses the pair with the SX camera microphone.

  But if I left out the functionality of client micro does not. I need to restart my computer for the features come back.

  No reason as to why this is happening?

  This looks like a driver problem. First of all, try to see if you can find a newer audio driver, may also update drivers for related equipment such as the dock and the chipset.

  If this does not help, you can try to see if disabling exclusive mode. If off exclusive mode help the issue, but makes it impossible for you to connect to the codec, check all the settings recording. You may have to disable all effects microphone such as the cancellation of the echo for your card to work without exclusive mode.

  Comments on how you price and information about what hardware you use, would be great if we can help others in your situation as well as possible.

• I need help please. (what is the next step after installing Vcenter?)

  Dear professionals

  I installed ESXi 5.5, Vsphere client, AD, SQL, SSO, inventory, service, web client Vsphere and Vcenter server.

  as you can see FRO the attached photo, I just connected to vcenter server and now I don't know what to do next.

  Also, should I connect the view of the Horizon to the Vcenter? How?  and what is the relationship between Horizon view the vCenter.

  Please me advice what to do, please guide me.

  Thank you very much

  naoufl

  The next step, you will want to do is create an object of data center - it's under this inventory you will add your hosts - ESXi

  vCenetr, this is what allows you to centrally manage your environment - view Horizon allows you to create an environment to host virtual offices - Horizon view interacts with vCenter understand the environment and to know what ESXi hosts there are available - this will provide more insight.

  http://vmwarelearning.com/. In addition, here are the links for the appropriate documentstion:

  vSphere - http://www.vmware.com/support/pubs/vsphere-esxi-vcenter-server-pubs.html

  View horizon http://www.vmware.com/support/pubs/view_pubs.html

• The inserted lines lose their order after multiple inserts

  Hello
  
  I created a table with a single column, in which I insert the following results. When I have only a single insertion, all right. When I have several insertions, something goes wrong and I lose the order, the table is pretty simple:
  
  -Create table
  create table Test_table
  (
  line VARCHAR2 (200)
  )
  tablespace TEST
  PCTFREE 10
  INITRANS 1
  maxtrans 255
  storage
  (
  initial 206M
  According to 1 M
  MINEXTENTS 1
  MAXEXTENTS unlimited
  );
  -Grant/Revoke object privileges
  Grant select, insert, update, delete, references, alter, index on Test_table to the PUBLIC;
  
  Cases where there is only a single insertion. All the lines in their correct order.

  BOF
  <LINE 1>
  <LINE 2>
  <LINE 3>
  <LINE 4>
  <LINE 5>
  <LINE 6>
  <LINE 7>
  <LINE 8>
  <LINE 9>
  <LINE 10>
  EOF

  Cases where there are 5 inserts. < line 1 > and < direct10 > changed place.
  

  BOF
  <LINE 1>
  <LINE 2>
  <LINE 3>
  <LINE 4>
  <LINE 5>
  <LINE 6>
  <LINE 7>
  <LINE 8>
  <LINE 9>
  <LINE 1> +---line 1 from the last insertion misplaced into the previous one+
  EOF
  
  BOF
  <LINE 10> +---line 10 from the previous insertion misplaced into the last one+
  <LINE 2>
  <LINE 3>
  <LINE 4>
  <LINE 5>
  <LINE 6>
  <LINE 7>
  <LINE 8>
  <LINE 9>
  <LINE 10>
  EOF

  Any ideas how can I avoid this?
  
  Published by: user13415143 on December 16, 2010 02:33

  The order of the results returned by a query that is not an ORDER BY is indeterminate. It could change from day to day, patch fix, version to another. If you care about the order of the results, you must specify an ORDER BY. This would certainly require that you add an additional column to the table to store the order (probably a sequence generated primary key) and you STOPPED BY this new column in your query.

  Justin