Assignment of VLAN dynamic of the Web authentication

Similar Questions

• Assignment of VLAN dynamic RADIUS ACS 5.2 Server with NAC

  We are trying to reduce the number of ssid in our network wireless with assignment of vlan dynamic with the acs. Our problem is that we use Cisco NAC so with assignments of vlan dynamic user will be checked by the NAC. Agent of Cisco sometimes pop up and do nothing to do or give a message cannot locate server. We even got an OOB error. Someone used a VLAN dynamics with the acs and the NAC successfully? The NAC is Out of Band

  Hello

  I supported oob nac and wireless and your efforts to make the dynamic assignment of VLANs will not work because of the way in which him vlan quarantine and access are mapped to this ssid.

  This work in in-band mode, however your design. This WLAN key needs to exist because the Manager sends the snmp trap to move the client from quarantine access.

  Just as a note, I'm sure you are aware is that ISE is the evolution of the acs and the NAC. Basically this your solution to reduce the skates and posturing of the customers.

  Sent by Cisco Support technique iPad App

• Dynamic assignment of VLANS / SSID using the IAS 4402/MS

  Greetings,

  In short, we have a WLC4402 (50 AP license) and about 30 1252 s towers in place. At the moment we have three VLANS / SSID in place - one for admin, to teachers and students. The WLC uses a server for MS Windows 2003 running IAS for PEAP authentication. Windows XP, the SSID clients entered manually based on "prior designation" 'type' laptop (admin, teacher or student).

  It works very well. However more frequently our users were 'sharing' portable computers so a student can need to use his laptop computer and vice versa. In short, we would like to use the dynamic assignment of VLANS / SSID as well as if a student has the teacher, 'students' laptop VLAN / SSID would receive them when connect (and apply the appropriate ACL, QoS policies, etc.)

  We have found the documents on how to do that with a CBS, but is there something available for this configuration with a MS IAS server.

  All entry information would be greatly appreciated.

  Joe

  The installer works fine with the Server IAS Ms. You must set the options for RADIUS (3 of them) which are documented in the ACS similar article of the same ilk. You can have one SSID, using RADIUS authentication and have the Active Directory to determine the membership to a vlan based on the group.

  The RADIUS attribute parameters are

  Tunnel-Type = Vlan

  Tunnel-Pvt-Group-ID = vlanid

  Tunnel-Medium-Type = 802

  I also like to set

  Ignore-User-Dialin-Properties = True

  You must create some policies in IAS to match your windows groups and set the id vlan correct. A separate policy of IAS by vlan.

  Set the attributes RADIUS by political IAS and ad group or however you plan on the determination of the membership.

  If you want to use RADIUS for administration, you must also define a separate policy that defines the RADIUS of the Service Type administrative = attribute

  Jim

• Assignment of VLAN dynamic by using the WC7520 controller

  Hello

  I use a few AP WNDAP360 for awhile and consider adding a WC7520 controller.

  However, I would use an assignment VLAN dynamic using a RADIUS server.

  Whereas it is possible with the 360 in stand-alone mode, it is clear to me if this can be done by using the WC7520 controller.

  The (obsolete?) reference manual said not a Word to this topic...

  Is there someone to share experiences with the 7520 and this type of configuration?

  Hello

  Thanks for your help!

  After reading the articles you suggested, I was still unable to find a definitive answer, so I asked pre-sales support and quickly received the following response from Tech Support level 2:

  There was a feature request to ask to implement, but it looks like it will not be implemented for the WC7520. Also, there is a feature request for the WC7600 which looks more promising, but still not possible currently and is not guaranteed to be implemented.

  In short: no, it is not possible, will not be on the WC7520 and could become so on the WC7600.

  Too bad, and it makes the much less interesting WC7520 for me, but at least it clearly quickly.

• 802. 1 x assignment of vlan dynamic based on MAC?

  Hello

  I use Catalyst3750 and authentication widows AD.

  Our customers PC is driving Windows (is not able 802. 1 x) which is connected to the catalyst switch.

  Is it possible to dynamic assignment of that one Vlan based on MAC?

  When possible, we want to do it without help of VMPS.

  and is there any document relating to the foregoing.

  Thank you very much for you help.

  Tomoyuki

  Tomoyuki Hello,

  What Radius server that you use to authenticate your Clients?

  To Secure ACS, you can configure a feature called "MAC-Authentication-Bypass" that accomplishes your needs.

  This feature must be configured on the switch and the Radius Server (which makes the responsibilities of vlan based on the MAC address of the Client)

  An overview of this feature can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/solution/macauthb.PDF

  I hope this helps.

  Kind regards

  Chris

• The web authentication.

  I want to configure a switch for IEEE 802 authentication port. 1 x with web authentication as a means of rescue.

  Can anyone provide an example of a valid configuration?

  Only web authentication does not work!

  Switch #sh run

  Building configuration...

  Current configuration: 3012 bytes

  !

  version 12.2

  no service button

  horodateurs service debug uptime

  Log service timestamps uptime

  no password encryption service

  !

  Switch host name

  !

  !

  AAA new-model

  Group AAA authentication login default RADIUS

  connection of line-con AAA authentication, no

  Group AAA dot1x default authentication RADIUS

  Group AAA authorization auth-proxy default RADIUS

  !

  AAA - the id of the joint session

  switch 1 supply ws-c3750 - 48P

  mtu 1500 routing system

  IP subnet zero

  IP - cisco.com domain name

  property intellectual admission name rule1 http proxy

  !

  !

  !

  !

  control-dot1x system-auth

  !

  !

  !

  !

  !

  !

  Profile relief aid

  IP access-group Policy1 in

  rule1 admission IP

  !

  pvst spanning-tree mode

  spanning tree extend id-system

  !

  internal allocation policy of VLAN ascendant

  !

  !

  !

  !

  interface FastEthernet1/0/1

  switchport access vlan 142

  switchport mode access

  !

  interface FastEthernet1/0/47

  switchport access vlan 142

  switchport mode access

  dot1x EAP authenticator

  self control-port dot1x

  relief aid dot1x

  !

  interface Vlan1

  no ip address

  Shutdown

  !

  interface Vlan142

  IP 10.1.254.1 255.255.255.0

  !

  IP classless

  !

  peche1 extended IP access list

  allow udp any any eq bootps

  deny ip any any newspaper

  !

  Server RADIUS attribute 8 include-in-access-req

  secret key of acct-port 1645 auth-10.1.254.187 - RADIUS server host port 1646

  Server RADIUS ports source-1645-1646

  RADIUS vsa server send authentication

  !

  control plan

  !

  !

  Line con 0

  line vty 5 15

  !

  end

  Try adding this:

  analysis of IP device

  In addition, if you want your users to web-auth to use DNS to resolve URLS, you probably want to add something like this to Policy1:

  allow udp any any eq field

  Don't forget that you need to wait until the 802. 1 X times out (90 seconds by default) for Web-Auth to kick.

  Shelly

• Ie9 beta does not have the web authentication

  Hello

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-margin : 0 cm ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : SimSun ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : Arial ; mso-bidi-theme-font : minor-bidi ;}

  I have a question:

  We had a user who defines the Cisco web-authentuicated WiFi SSID as network Public in the firewall of Windows 7 and when he tried to connect to WiFi, it appears a troubleshooting page and said: "Connection to Web pages are currently redirected to a different Web page."  It uses IE9 beta.  Most likely the browser it's a MiTM attack.

  Apart from declaring (SSID) network as a private network secure, y at - there another solution?

  Our goal is to get the users (which come from major conferences) on the network without them having to change a lot of things on their laptops. They would be naturally defined as a Public network.

  Thank you

  Suman

  The concept of web authentication IS a man in the Middle somehow attack... And IE9 is not a browser supported either.

  I don't know what makes IE cause this error exactly well. You have a DNS host name and the certificate on your webauth?

  Nicolas

• Cisco ACS, multiple CA, assignment of VLAN relevant to the domain

  Hi all

  I searched for a solution to a specific customer requirement.

  I want authenticate users with certificates from different RootCA wireless and assign them to one VLAN based on their field?  Ideally, using the same SSID and a Cisco ACS server.

  Is this possible?  Has anyone seen that it works?

  I realize that the ACS can have trust company for the relevant RootCA (dunno what version is needed for this?).  And that assignment VLAN is also possible to a unique SSID based on RADIUS attributes.  But I am not sure that these parts would fit together?

  Would appreciate some advice!

  Thanks in advance

  Rob

  Hello

  Yes, this is possible. I suggest that you implement one by one to make sure that everything works, but no problem to do so. All recent versions of ACS allow this.

  You can do mapping group from ad groups (a group for each area, so if you want to) and assign the vlan based on the mapping of this group.

  GBA can trust several certification authorities and authenticate users with certificates of all these cases. It's just a matter of import these number certificate in the trust list.

  And you can assign the vlan and use only one ssid as well.

  I can't guide you on the procedure that it depends on which version you have and if you have IOS ap or WLC, but it is basically each function separated as in the config Guide and just used all together.

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Dynamically find the web root

  I'm doing one of my truly dynamic applications as long as the reading of the configuration xml file. The configuration file is in my web root (config.cfm), that this file is simply an XML encapsulated in comment tags to prevent anyone to see if they go through it directly. Also, there is another file in the web root called findpath.cfm. Find the path contains ExpandPath("*.*) which I am hoping to use to capture and save a variable with the physical path. The physical path for both of these files is C:\CFusionMX\wwwroot\opiax
  
  Well, here's my question. Let's say I want to dynamically find the path to these files in the C:\CFusionMX\wwwroot\opiax\_admin directory in my application.cfm
  
  How can I do this with ColdFusion MX 6.1?
  
  

  I thought about it. Move my configuration file to its own folder and determine where I am.
  
  
  
  

• Website dynamic with the web forms and Wamp

  Y at - it an advanced course for Dreamweaver CC 2015 - I want to integrate web forms with database (downloaded configuration file / WAMP in dreamweaver CC 2015) do not want a course on older versions because the interface has changed THANKS

  Dreamweaver is a front-end development tool. Databases and processing of forms are back-end development. You can certainly use DW as your environment to work with backend scripts, but it is relatively unimportant to the main development workflow.

  So, find a course on using PHP/MySQL. It is not really important if you work with DW or another IDE.

• 4.1 of the ACS and 802. 1 x dynamic assignment of VLANS

  Hi guys,.

  a customer wants to implement assignment of VLANs with 802 dynamics. 1 x. The customer has the following facilities, Cisco ACS 4.1 for Windows, Cisco ASA 5540, CSA 5.2 with CSA MC, several routers and Cisco switches.

  Now, the questations are, we can implement assignment of vlan dynamic without a unit of the ANC and the customer also wants to decide between customers with real antivirus signatures and the old signatures. Older clients are denied access to the anti-virus server and the update of the signature and if everything is ok, to have access to the internal network.

  How could implement us this without a new hardware or software?

  Any ideas? Thanks for help.

  René

  You can have a look on the frame of the NAC system. If you want only the posture validate cable customers then there no extra components to buy. If you want to go wireless, you will likely need to buy a Cisco client that supports wireless. You can get the configuration from here guide:

  http://www.Cisco.com/application/PDF/en/us/guest/NetSol/ns617/c649/cdccont_0900aecd8040bbd8.PDF

  I suggest you prototype and see what you think, the good thing is that you can deploy on a per switchport basis so you can make the installer on ACS without disturbing what is there already and apply it by configuring the switch.

• VLAN and the SSID does not not in the Web Interface

  We have a couple of APs which do not show the VLAN and via the web interface of AP SSID.  If you go to the SSID Manager page in the web interface, the page rises but doesn't show any SSID configured.  It goes the same for Services - Vlan.  This page appears but does not show in any VLANS configured.  If you telnet to the APs, you see the mssid listed and all the SSID interfaces.  The SSID on the access point is functional and working.  It is just so hard to use the web interface for these APs.  I tried to compare configs running on APs where the web interface does not show this and APs that it shows, but cannot see any differences.

  Thank you.

  Have you tried with different browsers?

  Nicolas

• SG300: Cant assign aw vlan 802. 1 x + freeradius

  We recently got SG300-10 and try to get the assignment of vlan dynamic works via 802.1 x and freeradius. We got it so that the client connected to the SG300 would correctly auth, IE, I see this in "see the dot1x users:

  MAC               Auth   Auth   Session        VLAN
  Port     Username         Address           Method Server Time
  -------- ---------------- ----------------- ------ ------ -------------- ----
  gi7      testuser         58:55:ca:24:19:d4 802.1X Remote 00:04:39
  

  However, the client does not seem to be at all on the vlan correct or any vlan. If I change the port of "dot1x - radius attributes vlan static" to "dot1x - radius attributes vlan" then the customer cant auth at all (which is expected because it cannot retrieve the information of vlan).

  The freeradius users file looks like this:

  testuser  Cleartext-Password := "testpassword"
  ##Tunnel-Tag = 0,
  Tunnel-Medium-Type = IEEE-802,
  Tunnel-Type = VLAN,
  Tunnel-Private-Group-Id = "104"
  

  There is this whole line in the eap.conf file:

  copy_request_to_tunnel = yes
  

  Running config:

  net055#show running-config
  config-file-header
  net055
  v1.3.5.58 / R750_NIK_1_35_647_358
  CLI v1.0
  set system mode switch
  file SSD indicator encrypted
  @
  ssd-control-start
  ssd config
  ssd file passphrase control unrestricted
  no ssd file integrity control
  ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
  !
  vlan database
  default-vlan vlan 3333
  exit
  vlan database
  vlan 1,100,104,111
  exit
  voice vlan oui-table add 0001e3 Siemens_AG_phone________
  voice vlan oui-table add 00036b Cisco_phone_____________
  voice vlan oui-table add 00096e Avaya___________________
  voice vlan oui-table add 000fe2 H3C_Aolynk______________
  voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
  voice vlan oui-table add 00d01e Pingtel_phone___________
  voice vlan oui-table add 00e075 Polycom/Veritel_phone___
  voice vlan oui-table add 00e0bb 3Com_phone______________
  dot1x system-auth-control
  hostname net055
  line console
  exec-timeout 30
  exit
  line ssh
  exec-timeout 0
  exit
  encrypted radius-server host 172.16.200.57 key #REMOVED priority 10 usage dot1.x
  radius-server host source-interface vlan 100
  management access-list mlist2
  permit ip-source 172.16.202.0 mask 255.255.255.0
  permit ip-source 172.16.200.0 mask 255.255.255.0
  exit
  management access-class mlist2
  logging buffered debugging
  aaa authentication enable default enable none
  aaa accounting dot1x start-stop group radius
  enable password level 15 encrypted #REMOVED
  no service password-recovery
  no passwords complexity enable
  passwords aging 0
  username #REMOVED password encrypted #REMOVED privilege 15
  username #REMOVED password encrypted #REMOVED privilege 15
  ip ssh server
  ip ssh password-auth
  ip http timeout-policy 1800 https-only
  no ip http server
  tacacs-server timeout 10
  clock timezone " " 0 minutes 0
  clock source sntp
  !
  interface vlan 100
  ip address 172.16.200.21 255.255.255.0
  no ip address dhcp
  !
  interface vlan 104
  name gen-0-Gnv-204.0
  !
  interface vlan 111
  name guest-0-Gnv-10-66-61.0
  dot1x guest-vlan
  !
  interface gigabitethernet1
  switchport trunk allowed vlan add 100,104,111
  !
  interface gigabitethernet7
  dot1x guest-vlan enable
  dot1x reauthentication
  dot1x radius-attributes vlan static
  dot1x port-control auto
  switchport mode general
  switchport general allowed vlan add 104 untagged
  no macro auto smartport
  !
  exit
  ip default-gateway 172.16.200.1
  

  Looks like there was a similar questions here, but it seems to have never been resolved:

  https://supportforums.Cisco.com/message/3336810#3336810

  Hi all

  I'm working with Colin and that ends up being a problem of RADIUS. In the file eap.conf, for peap (auth phase 1).

  We need to enable copy_request_to_tunnel AND use_tunneled_reply:

  {PEAP

  # The syringe EAP session needs a default value
  # Type of EAP that is distinct from that of
  # module EAP-tunneled.  Inside of the
  # PEAP tunnel, we recommend that you use MS-CHAPv2,
  # as the default type is supported by
  # Windows clients.
  default_eap_type = mschapv2

  # module has PEAP also of these configuration
  Articles of #, which are the same as TTLS.

  copy_request_to_tunnel = yes
  use_tunneled_reply = yes

  Subsequently, we could see the answers of the test with id user vlan posting it once by response.

  See you soon!

• Assignment of VLANS by MAC address on a 6248

  Hello

  We have a mixture of 5548 and 6248 switch batteries, all updated to the latest fw, grouped on a 8024f.

  We add 560 Polycom phones to our network and want to assign phones to the voice VLAN and use the internal switch on the phone to the computer workstation.

  The 5548 have the handy table YES, the:

  VLAN voice Yes-table add 00907 Polycom/Veritel_phone___

  It works a treat and the assignment of VLANS for phone and PC works beautifully on the 5548.

  However, the 6248 legacy does not have this feature.

  Am I right assuming that we cannot assign addresses MAC Polycom-issued to one VLAN specific on switches 62XX as 55XX switches on? We are left with assigning simply labeled the voice VLAN? I'm afraid non-voix tag traffic for some applications will be treated badly as voice.

  What is the best way to do it? Here are the General config we will stop for the 6248:

  Configure
  database of VLAN
  VLAN 10 100

  interface vlan 10
  name "VoIP."
  output

  interface vlan 100
  name 'data network '.
  Routing
  IP 10.1.10.1 255.255.255.0
  output

  Example config for a switchport with Polycom and PC phone
  !
  interface ethernet 1/g1
  switchport mode general
  switchport General pvid 100
  No switchport acceptable-framework-type general tag only
  VLAN allowed switchport General add 100
  switchport general allowed vlan add 10 tag
  switchport vlan allowed General remove 1
  output
  !

  The 6248 uses a Broadcom firmware and the 5548 uses a Marvell firmware, that's why we see the differences in the characteristics. The 6248 has no YES table as the 5548. Here is the basic configuration of VLAN voice on the 6248.

  1.

  To start creating a VLAN voice, create it first VLAN database mode for VLAN.

  Console # console (config) # vlan database console(config-vlan) # vlan 2 console (config - vlan) #exit console (config) #.

  2.

  Then, globally enable the Vlan voice.

  Console (config) # vlan VoIP

  3.

  In the configuration of interface for the desired port mode, assign it VLAN to the port using general mode. Then, assign it VLAN voice on the port with the command vlan vlan id #.

  Console (config) # interface console item in gi1/0/10 # switchport general console mode # vlan 2 voice

  There is also this white page that goes over the process.

  www.Dell.com/.../pwcnt_voice_VLAN_support.pdf

  A workstation sends no marked traffic, and will be placed on the general mode port PVID. In this case, it seems that your PVID is VLAN 100, therefore all workstation traffic will go to this VLAN. I'm not aware of a situation where the traffic of the workstation would be confused with traffic voice and placed on the VLAN incorrect, you have a specific situation / application where you think this can happen? I can do some research on this scenario to help alleviate any concerns.

  Thank you

• Web authentication Catalyst 2960

  Hello

  I am trying to configure Web authentication relief on a catalyst 2960 switch. The goal is to authenticate customers via web authentication that are consistent (the part of 802. 1 x works fine) not 802. 1 x and allow them access to the network. The problem is that the web authentication seems to fail.

  The equipment about my question: switch catalyst 2960 (version: 122 - 37.SE) and a FreeRadius.

  Here's what happens:

  The authentication window will appear in my browser and the access request is sent to the RADIUS.

  The term RADIUS replies with an Access-Accept. Debugging running on the switch show that all this information is coming properly authentication and switch outputs debug a 'status = PASS' and permission to debug outputs a 'status = PASS_ADD'. Despite this the browser on the client generates a message "authentication failure".

  I have read the manual and the Cisco attribute value pairs are mentioned: ' priv-lvl = 15' and «proxyacl...»» ». They are required to make it work? Given that I'm not setting up any authentication switch connection via RADIUS.

  Any suggestions?

  Thanks in advance

  Yes, they are mandatory.

  If priv-lvl = 15 is not returned to the switch, the user will see? Authentication failed? and the access list will not apply. If the source in the statements of proxyacl field is not? everything? or there are other errors of syntax, the user will see? Successful authentication? but the access list will not apply and the user will be denied access to the network.

  Not sure about the configuration of specific FreeRADIUS, but you need to set up the? [026\009\001] Cisco av pair VSA. It should look like:

  Priv-lvl = 15

  proxyacl #10 = ip permit a whole

  Let me know if this lets you squared