Assistance needed for the installation of windows server 2008 r2
Hello users,.
I am new to this technology of the virtual environment and I need help in installing windows server 2008 r2 on a machine virtual workstation. For it so what are the recommended setting for drivers, no. of processors, amount of RAM, type of CISS or sata... etc to give the best performance on my virtual machine. If possible please provide me details to my knowledge.
Thanks in advance
Are you sure that you have installed a Windows Server 2008 R2?
Because the normal procedure is that after the installation, you will get a prompt to choose an administrator password. Once you are connected.
There is no additional user created during installation. This only happens when you install versions of Windows desktop.
Tags: VMware
Similar Questions
-
My machine is installed with Ubuntu 10.10 and together as a web server for a few months.
Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.
Easy steps?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Non-compliant ACPI BIOS error during the installation of WIndows Server 2008 R2 (x 64)
I had a problem on my vShpere / ESX4 server - when I try to install Win Server 2008 R2 x 64, it blue screens of installation with a STOP 0xA5 loading error
Microsoft Descrides piticular in detail as error:
This error is defined as "ACPI failed must succeed method.» This error
occurs if ACPI cannot build a control method to make reference to the ACPI
namespace. Other arguments for this error reference the ACPI object
It was being run and the name of the control method. A greatly
simplified explanation (which may not be entirely accurate) is that
the system cannot find a way to get the ACPI tables that define the
Plug-and-Play and the system power management features. (Taken from http://support.microsoft.com/?kbid=314830 )
Has anyone another vu cela, and are there settings I can try the prompt ACPI settings?
Thank you!
Ivan,
>
I had a problem on my vShpere / ESX4 server - when I try to
install Win Server 2008 R2 x 64, it blue screens loading configuration with a
STOP error 0xA4 beef
ACPI error, you mentioned is not for a bugcheck 0xA5 0xA4.
For more information about STOPPING 0xA4, see http://msdn.microsoft.com/en-us/library/ms795328.aspx.
This link mentions that bug 0xA4 control is generated when 'non paged pool memory is full. "
"If the nonpaged memory is completely filled, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, a different kernel mode driver requiring non paged memory can also cause this error.
Solve the problem
To solve a problem of impoverishment of nonpaged memory: Add new physical memory to the computer. This memory sincrease the amount of memory available in the kernel nonpaged pool. »
How much RAM do you have allocated to this virtual machine?
Faisal
-
Hello
I encountered the following error when I try to open the form in oracle EBS R12.1.1
It stuck for a little while and then appears an error message
FRM-92101: there was a failure when starting Server Forms...
(I've never been able to run the form on this)
I ran a vision online forum that works very well which means java is ok.
It is the new installation on windows server 2008 32-bit with costs of database (no vision).
I search on the internet and tested all of the available options, including;
change in the registry for example 1024,12288,1024 etc.
marking the check box for oracle process manager to PROD "allow service to interact with desktop".
check the configuration files of forms (all files of any bad path that I found and corrected)
running files adautocfg.cmd for db and apps (returned errors and can be verified at the following link)
https://DL.dropboxusercontent.com/u/60474194/adconfig%20apps.log
https://DL.dropboxusercontent.com/u/60474194/adconfig%20dB.log
I'm not a technical professional and unable to solve the problem, please help
Problem solved
-
Installation of Windows Server 2008 R2
Installation of Windows Server 2008 R2 on a server without an operating system present. Get an error 0 x 80070017. What is the cause? It is a new server.
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
How to configure the mode of kiosh for thin clients on windows server 2008
I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.
I'll have another group that more access is needed.
Kiosk.
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Instructions for the installation of Windows 10 on Dell Optiplex 755 with running Windows 7
I need instructions on how to install Windows 7 to 10 Windows on a Dell Optiplex 755.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Reg: The base backup for the update of Windows Server
Hi all
Oracle Database 11g Standard Edition 11.2.0.1
I plan to update windows server.
Thus, before the update of windows server, do I need to take backup of the settings regarding the oracle database.
If so, please help me, what are all the backup before the update of windows server.
Thank you
Madhu
Published by: Madhu.149 on October 15, 2012 09:50Is this cold backup and sufficient archives, for the exact replica of primary education
You can recover up to cancel if something happened.
Do I have to take the backup of the primary database as cold before the primary.
always always take backup before any operation.
You can use this link
http://thetendjee.WordPress.com/2007/08/29/how-to-perform-and-recover-from-a-cold-backup/
http://www.sensehaze.com/index.php/Oracle-database/82-Oracle-Data-Guard/110-DG-112-cold-back -
Issue of license; need information on the purchase of Windows Server 2008 R2 with 25 CAL
I am looking to buy Windows Server 2008 R2 with 25 CAL. The question I ask myself, is that if I were to continue this RDS would come with the initial 25 CAL or it would cost more. If so, how much per RDS? and how much would cost the package for the Windows Server 2008 R2 with 25 RDS CAL company.
Thanks in advance
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648
Hello
I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1
Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712
The convenience store has not solved it either.
The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.
Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?
It would be great to have a few strong indications here. Thank you!
System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.
The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home -
Installation of windows server 2008 R2 on Poweredge R320
Hello everyone
We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.
I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.
We found no Raid 0 disks
1 Vitrual disk (s) were found.
I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloadedSAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment
The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe
I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.
nodev.inf
percsas.inf
I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.
Thank you very much
Goudeuk
PS: I posted the same topic in the forum "Blade" by mistake. Apology.
"Do you mean that if my BIOS/SATA configuration has been set to RAID 1 I should have drivers chipset/AHCI for a successful installation?"
No, because you are not using the onboard SATA RAID - your built-in SATA is used ONLY by your optical drive, so it should not be in RAID and AHCI usually requires special drivers, which is not required when you use optical drives. However, pilots of chipset/AHCI may have helped Windows to see the optical drive in such a way that the installation could proceed (if she needs the RAID controller for real hard disks, you will NOT see this particular message - you will see another message when Windows cannot find not all drives to be installed on).
"When someone would set RAID 1 for sata configuration?"
ONLY if you use the S110 RAID controller onboard. You use the H310, so you don't want to mess with the SATA RAID on board.
-
error of the MMC in windows server 2008 r2
while closing after my windows server 2008 r2, many programs are open so I tried to close all the one by a sudden .at instead of using the X I used the close button. in mmc, I suppose that an error has occurred that caused problem blocking the program works correctly
1 debug the program
2. close the program
I opted first then after closing the program, debug in my server its marked as an error event viewer now. No. changed happened in my network. and it of good now
I just wanted to know the weather, that it will lead to other problems in the future
the description of the error below
Name of the failing application: mmc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc808
The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000041d
Offset error: 0 x 0000000000000000
ID of the process failed: 0 x 1250
Start time of application vulnerabilities: 0x01d2126e21d827f5
The failing application path: C:\Windows\system32\mmc.exe
Path of the failing module: unknown
Report ID: 6acff019-7e81-11e6-ade8-001aa08bdf6fam new on the server field pls sujjest me a response to make sure that my server running without any problem...
This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Failed Installation of Windows Server 2008.
Hey,.
I recently tried to install Windows Server 2008 on ESXi 4.0.0 (revision 1).
The installation went all the way until they have to 'Finish installation', how come wrong stop installation.
"Setup.exe - bad image".
After that, another windows came up saying that windows could not be configured for use on the hardware in my server.
Could someone advise me to solve this?
Thank you.
Oliver.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Installation of Windows server 2008 on Poweredge R320
Hello everyone
We bought a new Poweredge R320 server in order to install 64-bit Windows Server R2. There are 2 drives inside and they are preconfgured as raid1.
I changed the configuration of SATA in RAID mode and also initialized by PERC-H310 RAID1 without any problem. When the server starts up, I see the following messages.
We found no Raid 0 disks
1 Vitrual disk (s) were found.
I can boot from the windows media but no disks are found and is prompting me to browse and install the drivers from nesseray. So I downloadedSAS Raid drivers from this link: ftp://ftp.dell.com/Pages/Drivers/poweredge-r320.html#Drivers%20for%20OS%20Deployment
The name of the file is: DRVR_WIN_M20VR_5.2.220.64_A02_ZPE.exe
I extracted the contents of a USB, restarted the server and when you are prompted for drivers during the windows installation, I traveled to USB which 2 files are found.
nodev.inf
percsas.inf
I tried both of them, but every time I get a message saying to make sure that the correct drivers are found. It seems that is not the correct drivers.
Could be he you please direct me to the correct drivers? Or if you have any suggestions please let me know.
Thank you very much
Goudeuk
Even I have the same problem... Can anyone suggest a solution?
Thank you
Scott
http://www.vmexplore.com
-
I can't get it to load the patch installer. Of course, life would be easier if Dell has released a proper version of OpenManage (with support for Windows Server 2008 x 64).
Here are the instructions...
Application of the Service Pack
1 double-click the MSP file or enter the following in a command prompt window:
MsiExec.exe /p OM_5.4.0_Man_Node_A01.mspAnd the error message...
Windows install
The upgrade patch cannot be installed by the Windows Installer because the program to be upgraded is may be missing, or the upgrade patch may be a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.
Maybe you are looking for
-
Dimensions screw rail SCXI-1001
I don't know if this is the best place for this, but... I have some PCB custom this escape several SCXI-1130 modules in SCXI-1001 chassis connections. Since I don't want the PCBS come A) loose, or B) cause of excessive fatigue on the module connecto
-
Update security for Windows XP (KB24811090)
Error: high priority update. For Windows XP. Error message: update for windows XP (KB2481109) security failed? Tried to install several times. I coukd not find all the information about it or get installed it. Help
-
had a virus now I get an authentication error when I connect to my aol email
How can I fix
-
Windows Vista disable itself someone can help me? (Came pre-installed with laptop)
Hi, my Windows Vista with Service Pack 2 (fully updated) has itself disabled and I don't know why. I've had the laptop since late 2009 and got of curries, while he was authentic. Does anyone know why this happened and how can I get it back? Whenever
-
Win7 gadgets (sidebar) slow and intensive CPU lately, for no apparent reason
In recent days, all my Win7 Gadgets react very slowly; The Process Explorer and Task Manager indicate that SIDEBAR. EXE is to eat about 10% of the 8 Virtual cores (4 physical) of my CPU i7, one of the nuclei between 0 and 100% just for this process.