Assistance with ThinAPP 4.7% and 7.2 SAPGUI patch 8 (configuration files)

Similar Questions

• How to FORMAT my hard drive with a RECOVERY PARTITION and my system restore from. BKF files

  History made as short as possible.

  I inherited a gateway with XP Media Center 2004. I transferred all my old files to the new computer, and it worked fine. I did a full backup of the system (.) BKF). Later, I installed a disc for my Vivitar camera I used before with my old system and my computer crashed.

  I tried everything I know to do a restore. F8, F10 and F11 during start-up and the best I could come up with was the safe MODE, but it would fail to any ENTRY.

  I really feel like the hard disk must be formatted and start over. I can not access the recovery partition and no XP CD was provided.

  My question is: How can I reformat the hard drive with a petition of recovery and reinstall my operating system of BKF files?

  If you have a recovery partition, I suggest you post in the forums of the bridge
  assistance.
   
  Another option is the following:
  http://tips.vlaurie.com/2006/05/recovery-console-for-those-without-an-XP-disk/
   
  "luckyone_27105" wrote in message
  News: 720fbbc2-6fb9-4fd7-9411-bdd1ec89b144...
  > A long history made as short as possible.
  >
  > I inherited a gateway with XP Media Center 2004. I transferred all my old
  > files to the new computer and it worked fine. I did a full backup of the system
  > (. BKF). Later, I installed a disc for my Vivitar camera I used
  > before with my old system and my computer crashed.
  >
  > I have tried everything I know to do a restore. F8, F10, and F11
  > during startup and the best I could come up with safe MODE, but it would be
  > not allow any INPUT.
  >
  > I really feel like the hard disk must be formatted and start over. I have
  > unable to access the recovery partition and no XP CD was provided.
  >
  > My question is: How can I reformat the hard drive with a petition of recovery
  > and reinstall my operating system of BKF files?
  >
   
   

• Hi I try to get assistance with a receipt lost and the fact that on the date of receipt, Adobe took twice the amount smame on

  Hi I had lost a receipt for October 17, 2013 that we could recover from Adobe however on the same date the same amount had been caught twice.

  I got 1 and it is very good but we need a refund on the second.

  
  

  Case 0218208111 of what we worked on.

  
  

  I sent the the information with a copy of the bank statement yesterday and I got a response saying the case had been closed earlier.

  
  

  Kind regards

  
  

  Ian Collard
  

  Please try to get the Bill next https://helpx.adobe.com/creative-cloud/help/print-receipt.html

  Concerning

  Stéphane

• I need assistance with my auto signature and why my emails when I answer you are only bolded?

  I can't my auto signature of normal appearance. Every time now that I'm going to answer an email, he makes bold all the e-mail.
  Can you please help?
  Thank you

  If the police is important, then you must do all of this as an image. E-mail cannot guarantee to display in your policy chosen; your font may not be not installed or available on the machine of the recipient and in all cases, the beneficiary may replace or ignore your font settings.

  You say you tried 'all options' but that does not tell us what you have, and more importantly, have not tried.

  Yet once, how did you create your signature?

• All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

  Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

  all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

  Hi MarcSatz,
   
  -Did you change on your computer before this problem?
   
  This problem occurs when one or more of the following conditions are met:
  • The registry values that are associated with the file name extension are corrupted or missing values.
  • The computer is infected with a virus.

  Here is an article that will guide you in the process of fixing the issue:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
   

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

• I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  I could not find download Windows Mobile Device Center 6.1 so I can download pic & videos from my phone to my computer. I need assistance with their phone is off and on computer any ideas please help.

  See http://support.microsoft.com/kb/931937

• I need assistance with combine jpeg and raw photo even after import [was: Hello?]

  I need assistance with combine jpeg and raw photo even after importation

  You mean both JPG and RAW file after importing from a camera memory card? There is a setting in LR preferences to process the JPG images next to RAW files as separate photos. It is under the general tab of preferences. By default, this option is not checked.

  If this is not your problem, then we will need Lots and Lots and lots more information about what you mean by the combine

• I need assistance with video editing and post production building

  Hello

  I decided after a long time to invest in a PC for me to use the video publishing house (at work, I have dual Xeon based build). After a long search I opted for this configuration and I am interested in your opinion and maybe a few suggestions for improvement. I chose X 99 platform for future compatibility upgrade and the CPU I chose now, I can replace later down the road if/when Intel realeases the 10 new core CPU i7 LGA2011-3. So I didn't want to spend more money on the K 5930 or 5960 X at this time, and I feel the 5820K with a stable overclock will give me the results I want for now, as I edit 1080 p videos for now.

  I turn mainly on SONY PMW - EX1 and NIKON D800, with sometimes images of k 4 from DRONES. I use PP to publishing, AE for the post production and motion graphics, SOUL of renders, Lightroom and PS for RAW photo editing.

  Case: Fractal Design R5 Blackout edition

  PSU: CORSAIR 750W 80 + modular Platinum HX750i (I hope that it will be enough even with overclocking)
  

  MB: ASUS X 99 PRO / USB 3.1

  CPU: INTEL Core i7 5820 K 3.3 GHz 15 MB BOX LGA2011-3

  CPU cooler: NOCTUA NH-D15S

  RAM: CORSAIR Vengeance LPX CMK32GX4M4A2666C16 32 GB (4 sticks of leave options to upgrade to 64 and take advantage of the quad channel)

  GPU: ASUS STRIX-GTX970-DC2OC-4GD5 4 GB PCIe (is it useful to the 980 for these given additional CUDA cores it is $ 200 more?)

  SSD1: Cache files SAMSUNG 850 series 250 GB 25/S600 EVO - OS, PROGRAMS and PP

  SSD2: SAMSUNG 950 PRO 512 GB SSD PCIe 3.0x4 m2 - MEDIA PROJECT, FILES PREVIEW and OUTPUT of RENDERING

  HDD1: WD WD40EFRX 4 TB 64 M/S600 Red Edition -j' I may be obtained with two drives in RAID1 to memorize everything, after I'm done with the project and copy everything SSD2 to HDD1, but for now, I'm going with a single, and modernize if more space and backup is necessary.

  I intend running 64-bit PRO 10 Windows.

  Let me know what you think and suggestions and opinions are welcome.

  THX

  good deal and CPU cooler, x 10 core i7-6950 is widespread about 6 months out and compatible with x 99. You wouldn't have to upgrade right then, but every time you felt the need.

  If you are looking for max overclock stable and expansion as a new video card, a quality 1 k watt will be a better option. for a little more, the SuperNOVA 1300 G2 evga and XFX P1-1250-BEFX are on sale at a discount, if you don't mind discounts. the hx850i corsair is also a little more with his rebate, the hx1000i jumps a bit with no refund.

  GPU - core count, the gtx 980 would be worth $400 vs gtx 970 price. the 980 gtx has more than just a difference of base number, but it still makes the $500 + unattractive price tag. If you think you need more power now, take a look at the gtx 980ti. If not, go with the gtx 970 and if / when you do not need an update, add another to the creation or upgrade to pascal or later, when nvidia releases.

  If possible, I would avoid mirror or any what raid for backup. RAID (same mirror) can add an additional point of readers isolated data and data corruption or failure. three separate copies is good for critical data, two if not so important. using a Cloud Computing service may be a good option for one backup copies.

• Using Migration Assistant with no display

  I got my MacBook mid-2010 (2.4 GHz, 4 GB RAM, OS X El Capitan) for 2 years.

  It splits into two somewhere within 2 years.

  The MacBook was still usable, but it had to be on a desk. The screen was completely separate from the base. It still worked.

  I woke up a few days ago to find that someone had cut the display cable holding the MacBook set and turn on the screen.

  I bought an early-2011 13 "MacBook Pro to replace the dead MacBook. (Yes, I buy old Mac because the news is so expensive).

  Old Mac has been saved semi regularly, so I have an old backup to use for the new Mac. The problem is that just before the death of the former Mac, I downloaded a bunch of stuff that has not been saved. I really want the files that have not been backed up on my new MBP.

  Can I use Migration Wizard with an Ethernet cable and transfer of data from one, or Migration Assistant must be running on old Mac as well?

  I tried to connect (I'm sure that the computer is still running, it doesn't simply have a display) on the old Mac, plug the backup drive and I hope to do a backup hourly, but Time Machine did not only.

  Any suggestions would be GREATLY appreciated.

  If you use Ethernet or a wireless network to transfer data, Yes. If you can not download the files and file-sharing has not been activated on the old Mac, you must either get fixed display or put its internal drive in a closed Chamber.

  (143074)

• How can I get assistance with my Apple Care Protection Plan when I am abroad

  How can I get assistance with my Apple Care Protection Plan when im abroad?

  I brought an iPhone 6Plus in Europe and now I am traveling

  I would like to know if Apple Care Protection Plan cover me in the United States and what I can do

  Hey there, Aleji!

  Based on your post, I understand you have a few questions about your AppleCare protection + plan, and where coverage is available.

  You can get more information on your cover in the next article.

  About your coverage options and support services

  Additional information about the warranty is also available on the link below. Simply select your device and the region.

  The hardware guarantee

  Have a great day!

• on the left are 3 red balls, yello, green, who go around in a circle. When I click it it says download assistance, what is it for and how can I learn more about them?

  to the left of the URL are 3 balls, red, yellow, green, who go around in a circle. When I click it it says download assistance, what is it for and how can I learn more about them?

  An add-on (extension) for download videos from Youtube-like on your hard drive

  • See-> https://addons.mozilla.org/en-US/firefox/addon/video-downloadhelper/
  • See-> http://www.downloadhelper.net/index.php
  • See-> http://www.downloadhelper.net/documentation.php

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• When "allow pages to choose their own colors, instead of my selections above" is not checked in the menu options, I can't see images on Web sites. How can I maintain with the box unchecked and always display images?

  I recently decided to spend autour colours in Firefox. I work in a fairly dark environment and have the dark color on white or light background text is quite difficult on my eyes in the dark.

  I changed the background to a dark gray, light gray text and visited the two and links not visited in a blue light. With these changes, I unchecked the "allow pages to choose their own colors, instead of my selections above" box.

  After unchecking the box, I'm more able to display images on many sites. Turn all grey images - as if Firefox has changed their image in part of the background. When I check the box, I am able to see fine pictures, however, Web sites typically return to their light background with dark text.

  Any help and assistance with this is greatly appreciated!
  Thank you!

  You can use the NoSquint extension to define the font size (zoom text/page) and colors of text on web pages.

  • NoSquint - https://addons.mozilla.org/firefox/addon/2592

• HP Support Assistant tells Me to download and install the same update

  I have a HP Envy 700-027c. Maintaining HP Support Assistant telling me to download and install a Cyberlink PowerDVD to sp63146.exe, even if I downloaded it, installed and rebooted my computer 3 times or more. I don't get no error on installation, then believe the installation have been successful.  Please notify. Thank you!

  18...

  Welcome to the HP Forum!

  You could try the following:

  Control Panel > display icon > programs and features >

  Scroll down, find and uninstall HP Support hasWizard.

  Restart your computer after uninstalling the existing version of the Support Assistant.

  Download and install the latest version of the HPSA:

  HP Support Assistant

  Restart / reboot the computer and log in

  =====================================================================================

  If the problem persists, you can try:

  • Open HPSA > click "updates and optimizations" (wording may slightly differ) >
  • Select them Updates settings and messages >

  Under ' how would you like to receive updated software and messages from HP?

  • Select in the menu dropdown:

  Search for updates, but let me choose whether to download and install them

  Always in the updates and optimizations >

  • Check / initiate a list of available updates >
  • If the offending hotfix package is still listed, then click on it (maybe right-click?) and a value of 'Ignore' or 'hide' this package

  > Once 'Hidden', the package should not display longer towards the top of the list of available updates.

  Comment

  In particular, it is the opinion of this Expert that you ban HPSA to download and install a BIOS update on your computer.  You should always, in the opinion of this Expert, look for the updates to the BIOS on the website of your computer and only download and install a BIOS update when the update is directly applicable to your situation or if you are having problems with your computer.

  For your reference:

  Troubleshooting HP Support Assistant (Windows 7)

  Good luck!

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts to help you.

• How to change the input range (DAQ assistant) with a digital command?

  Hello everyone

  I am currently working with the NI USB-6218 acquisition card.

  In order to acquire a signal, I would like to be able to choose the input range of the DAQ with a digital command Wizard (and not opening the window of DAQ assistant) (as 'number of sample' and section 'rate'...)

  Is this possible and if so, how?

  Thank you very much in advance for your answers!

  You can't with the DAQ Assistant so just click on and select "generate the Code of OR-DAQmx. You can edit the Subvi who performs the installation.

• I need assistance with Outlook Express

  I need assistance with my outlook express. Please

  See www.oehelp.com/OETips.aspx#7 or be more specific, and perhaps we can help you.

  Steve