Assistants of patch

Similar Questions

• You are looking for assistance on patch

  Good day to all

  I inherited a 4 cluster nodes with all hosts running ESXi 5.0.0 (721882), I tried to create a new virtual machine with Server 2012 when I discovered that these hosts were not patched in a long time. I am trying to understand the procedure to get the fixes on these hosts and I was wondering if I could get a boost in the right direction. The Update Manager is something I will have trouble enter

  Dear BaghdadIT, you can patch for vmware in two different ways. One is by the Update Manager and another is patching offline.  If you want to patch via Update Manager, your vcenter connected must to internet to download patches (the simplest) and it would be vulnerable to intruders.  Thus, in most of the environment that they prefer to do patching offline. so here are the steps that you can follow to make patch in offline. (1) download the latest patch there is ESX from vmware site to your PC connected to the internet. ( http://www.vmware.com/patchmgr/findPatch.portal 2) copy the downloaded patch (.zip) file in vcenter and from there, you can copy the file to one of your data shared via winscp store or you can use the data store Navigator and download the file method. to patch all hosts, the data store must be visible to all of your host 3) log the vcenter and put the host in maintenance mode (DRS must be activated in order to move the virtual machines automatically another host) 4) connection to the esxi SSH host that you want to patch (if it is not activated activate it via the console or via vcenter) 5) go to the data store and access the sample patch file ((: cd/vmfs/volumes/datastore0/patch datastore0 here is shared and patch data store is the folder name of the file patch 6) run command to install patches example ESXi500-1254542 software esxcli vib install/vmfs/volumes/datastore0/ESXi\ patch/ESXi500 - 1254542.zip - d 5 below) after you run the command you will see the message as below and the system will be restarted the Message: the update has been completed successfully. but the system must be restarted for the changes to be effective.  (6) restart the host, run this command to display your patches esxcli list software vib . more when it is restarted, you might see connectivity lose in Center v. wait a few times and connect back to the host again to the center of v. and exit maintenance mode. Rerun the DRS. that all your patched army. If you have any question here so that our people will give you solutions. Thank you

• R12.1.3 - Patch Wizard is no longer work after upgrade CPU

  R12.1.3 on RH Linux x86_64.

  Just upgraded my environment R12.1.3 to access the Jan 2013 CPU level and decided to install the Patch Wizard to see what he shows now.

  Previously, I had to apply the patch "10629956 - Assistant of Patch Oracle Applications" to get the patch Wizard to work with our proxy server.

  Initially, I just went ahead and applied that the correction for my new config but still could not overcome this error:

  Validation error. Please check the fields below.

  Unable to connect to Metalink. Please enter a valid userid and password Metalink.

  Please also check if the Web Proxy configuration information are correct.

  
  

  Now, after further investigation I see that there is a patch to update:

  Patch 16357991 to get the latest version of Patch Wizard in Oracle E-Business Suite (version 12.1)

  This Patch has been replaced.    Reason 16357991 included in 11071638

  I applied patch 11071638 but I still have the same validation error.

  Plots of pre - req R12. BDM B.Delta.3 [9239089] and R12. ATG_PF. B.Delta.3 [8919491] had been applied.

  I still have an older instance that runs and patch Wizard works correctly with the same credentials and proxy server settings information there.

  So, how to solve this?

  .

  
  

  
  

  Have you bouncing application services and see if that helps?

  Please also see (new patches required for the Wizard Patch, Patch Manager, and Oracle Application Exchange Management Pack for the version of Oracle E-Business Suite 11i, 12.0 and 12.1 [1267768.1 ID]) and make sure you have all the patches applied.

  Thank you

  Hussein

• Patching stand-alone hosts ESXi 4.1

  I need assistance with patch 4.1 ESXi stand-alone hosts.  Is it possible to stage patches?  They can be downloaded and copied ot the host first?  I have to do it via a WAN connection and want to copy the patches before correction of the host. I need also some of the commands necessary to achieve this.  I'm not very good with the command/syntax of command line.  Any help is greatly apprecieated.

  You can stage patches if you are using vCenter Update Manager.  If you do not use vCenter you could

  (1) copy the patch into a local data store on the host

  (2) run the following cmdlet to PowerCLI - install -VMHostPatch -HostPath vmfs/volumes //.

• New installation of Windows 7; No driver for the wireless adapter

  Ohmuhgod, please help!

  I'm on a Pavilion G7 - 2017cl and just installed Windows 7 Ultimate 64 bit. I installed all the recommended drivers, software and upgrades http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5275...              and everything is going well except for the wireless network card driver. the sp57538.exe and the sp56154.exe do not install correctly.

  In the devices under other devices Manager, there's a yellow! indicator "Network controller" with "manufacturer: unknown" and under the hardware id is:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  I tried: manually update the driver with several other downloads of various products of hp as a poke-and-hope approach; all the different combinations of deactivation/activation of the active devices while trying to install the drivers; install drivers in safe mode; Uninstall and reinstall the software amd chipset driver; HP Support Assistant; A patch of Bios setting parameters by default after a hard reset; and at my wits end, reinstalling the operating system and install all the fresh drivers one by one with a reboot after each... same result.

  I've been googling and binging for about ten hours... magical HP assistants, please send me a patch!

  Try Atheros:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D0%257CswItem%253Dob_108905_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D3%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Failing 10.2.3.2 patch audit Vault on AV AV Configuation Assistant Officer

  Hello
  
  Applying 10.2.3.2 patch Vault check on top 10.2.3.0 Audit Officer of Keystone. Get the following error after installing 100% Audit Vault Configuation Assistant components
  
  Installxxxxxx.log information
  
  OPatch succeeded.
  
  INFO: Setup Wizard "Oracle Audit Vault Agent unique Patches ' succeeded
  INFO: Command = oracle.av.common.AvcaCfgPlugIn /oracle/app/oracle/product/10.2.3/av_1/bin/avca s initialize_agent - nom_agent agent_hmrac2 - agentusr ${s_agentusr} agentport - 7016 - av HMCSPV0921. HIGHMARK. INTRA:1522:AV. HIGHMARK. INTRA - rmiport 3121 - 3300 jmsport
  
  INFO: Setup Wizard "Oracle Audit Vault Configuration Wizard" managed
  NEWS: All the tools have been executed successfully
  INFO: The ' / oracle/app/oracle/product/10.2.3/av_1/cfgtoollogs/configToolAllCommands ' script contains all of the commands must be executed by the configuration wizards. This file can be used to run the outside YES configuration wizards. Note that you may need to update this script with passwords (as applicable) before running the same thing.
  -----------------------------------------------------------------------------
  CAUTION:
  The following configuration scripts must be run as user 'root '.
  #! / bin/sh
  Running the #Root script
  /Oracle/app/Oracle/product/10.2.3/av_1/root.sh
  To run the configuration scripts:
  1. open a terminal window
  2 log in as 'root '.
  3. run the scripts
  4. return to this window and click 'OK' to continue
  
  INFO:
  End of the Installation Page *.
  The arch Agent Audit Oracle 10 g installation succeeded.
  WARNING: Do you really want to leave?
  INFO: User selected: Yes/OK
  
  INFO: The OUICA command is issued from oracle/app/oracle/product/10.2.3/av_1/oui/bin/ouica.sh.
  -----------------------------------------------------------------------------
  
  *"/Oracle/app/Oracle/product/10.2.3/av_1/cfgtoollogs/configToolAllCommands* performed a following order and successful.
  
  [oracle@HMCSPS02 Yes] $ cat ' / oracle/app/oracle/product/10.2.3/av_1/cfgtoollogs/configToolAllCommands '.
  # Copyright (c) 1999, 2009, Oracle. All rights reserved.
  /Oracle/app/Oracle/product/10.2.3/av_1/bin/AVCA apply_patchset
  
  [oracle@HMCSPS02 Yes] $ echo $ORACLE_HOME
  /Oracle/app/Oracle/product/10.2.3/av_1
  
  [oracle@HMCSPS02 Yes] $ sh /oracle/app/oracle/product/10.2.3/av_1/bin/avca apply_patchset
  Deployment to standalone OC4J...
  Restart the agent...
  Agent restarted successfully.
  
  Retried component has failed but once again. That's why root.sh run and clicked on the Next"" button. then message received as "Agent 10.2.3.2 Installation was successful, but some of the missing components, skipped or canceled that can operate properly."
  
  my client update patch has succeeded or what is the solution?
  
  Any help on this would be appreciated...
  
  Kind regards
  Manish

  Manish H:

  As far as I can tell by the newspapers, the application of the 10.2.3.2.0 really successful updated patch. Why do you not?

• 11i Patch - Patch CPU Assistant and quarter

  I was responsible for the quarterly Oracle CPU application to our 11.5.10 CU2 environment.
  I have some experience to the patching via adpatch etc, but never tried to apply a front CPU.
  My experience so far has been a lot of reading, check pre-reqs causing more pre-reqs, check to see if they have been applied or not.
  Seems to be a lot of manual control and subject to error if something is not respected.
  I did a bit of work to try to start using the Patch Wizard (patch to install the 'Support' filter so I can at least check that I need extended Support enforcement to date).
  
  In any case, the real question here is can I use Patch Wizard to help me apply oracle CPU by checking my config and provide me with a list of patches that should be applied?
  Or I can not really do this but rather just a list updated, based on when I submit my application for update? Still trying to learn that all Patch Wizard can do for me.

  Hello

  In addition the foregoing, I believe that Wizard patch does not say what technology you need to apply patches to stack. So, I would suggest you go through the below referenced doc and check what patches you should apply.

  In addition, please note that the Oracle E-Business Suite CPU fixes for versions prior to 11i10 CU2 are not cumulative - see (releases of Oracle E-Business Suite 11i and 12 Critical Patch Update knowledge Document (July 2010) [986534.1 ID]) for more details.

  Thank you
  Hussein

• Assistance with ThinAPP 4.7% and 7.2 SAPGUI patch 8 (configuration files)

  We managed to create a SAPGUI ThinAPP version, but there are configuration files that we need to have visible in the sandbox of the end user. This is necessary so that these files can be updated to take account of any future system/server. Here are the files. Does anyone know how to do this or have a work around?  We had reviewed the ThinApp-SAPGUI pdf as well.
  
  Thank you

  PJM

  -saplogontree.xml: %AppData%\SAP\Common
  -saplogon.ini: %AppData%\SAP\Common
  -saprules.xml: %AppData%\SAP\Common
  -SapFrontendService.xml: %AppData%\SAP\
  -sapmsg.ini: %programfiles%\SAP\Frontend\sapgui

  Here is a working VB script that copies the configuration of the local computer files (can be changed for a drive mapping or a network) to the SAP GUI sandbox.

  The script automatically copies the configuration file from the folder "C:\SAPGUI Config files" in the sandbox every time that the application is launched. You can modify the script to copy only once by adding the OnFirstSandboxOwner or OnFirstParentStart function to copy the files before the ThinApp launched.
  Please follow the steps below:
  1. keep the 5 on the physical machine configuration files
  2. remove the respective ThinApp project files of these configuration files
  3. copy the VB script in ThinApp (root level) project folder and rebuild the package by running the build.bat file
  I tested the script and it works fine. Please, try the steps and display your results.
  PS: Rename the attached in .vbs file

• HP Pavilion 500 series: I get a message saying that you have pending updates for Hp Support Assistant over and over again

  HI a little while back I upgraded to anniversary Windows 10 update things went well for me I keep hp Support Assistant on my desktop in the process of updating Windows 10 anniversary.  Finally, I decided one day to check hp Support Assistant to ensure that I had the lastestet version.  I went into Hp Support Assistant and clicked on about and clicked on the button for the latest version control, then a window is come in saying I had pending updates for Hp Support Assistant I would like to apply or not.  I pushed on the Yes button.  After the download and install updates and hp support Assistant stops and tempary files are deled then hp support Assistant will restart and return to the start page.  Everything seems to work fine download with green and white checkmarks circles with the categories above.

  I guesss I am asking for help it is because for days and days now when I go to HP support Assistant and click search the latest version that I get this message, you have pending updates for the support of hp Assistant you would like to apply or not.  I would now like to how pending updates will I have to ask a support Assistant hp until I don't see updates are available for the support of hp Assistant.

  Here is some information that might be helpful below:

  HP Supportt Assistant program file version: 16.101.7752

  How can I ensure that I have the latest version of the Support Wizard on my desktop computer.

  HP Support Assistant: 8.3.34.7

  Patch: 8.3.34.7

  Framework: 12.5.32.37

  Configuration files: 8.0.6294.2155

  Let me now is how easyier I could apply all updates waiting for the support of hp Assistant for Windows 10 home Edition 64-bit operating system.

  Thanks for your time and your help.

  @funny35,

  I'm glad that I could be useful,

  To help others looking for the same solution, please click on the tab "accepted solution".
  
  I thank you for your time and have a nice day!
  
  Kind regards

• HP Pavilion 500 - 205 T DT: HP Support Assistant does not work in Windows 10

  I have recently upgraded to Windows 7 Professional (which came with my HP Pavilion) to 10 (64-bit) of the window.   I have problems with HP Support Assistant - tells me that the .msi file is missing.  I tried to uninstall, reinstall, and he always tells me that the .msi file is missing and I get error 1639, error 1714 and error 1603.  I TRIED all the articles and tips and nothing works.  Please help and send me the patch or the link for the fix to [personal information deleted].

  Try using revo uninstaller or geek uninstall to uninstall the previous version first.

  Then, try again to install the new version of HP Support Assistant from the link I posted.

• Cannot use, uninstall or reinstall HP Support Assistant

  I had a crash of hard disk and reinstalled from a backup, but the restoration was not complete. Things work pretty well, but not 100%. The key is that my HP Support Assistant PC health does not work and I can't uninstall or reinstall. They are not in the list of installed programs. I get the message that there is already a version of the wizard for help on my drive, whether the download don't reinstall or update.

  I have a HP Pavilion (all-in-One) MS-225 with Win7 Home Premium, 64-bit. It's a year and a half, is no longer under warranty. Is there a way out of this dilemma? Thank you!

  Frank

  UPDATE: I just got the update to run, but it gave me this error message:

  "HP Support Assistant Application Update / your system does not satisfy the minimum requirements for this patch." / However was cancelled. (1602).

  

  Arniceous,

  Thank you for your response and suggestions.

  After a lot of trial and error, I finally got it works as follows: first of all, I downloaded and installed the latest update for HP Update. Then I renamed the folder HP Support Assistant (didn't do any deletion again) by adding ".old" to it and retries, download and install the latest update for the wizard. This time, he worked and installed!

  So at this stage my PC is OK again and back to where it was before the crash of hard/restore disk. All HP now works as it should.

  I hope this can help you and others in the effort to repair that do not have HP help or a fix for.

  Frank D

• hp support assistant for the new version update is not installed

  HP Pavilion Slimline s5306ukP; Monitor LCD 20-inch HP 2010

  My problem is that I recently had a HP Support Assistant alert to download the new HP Support Assistant for the latest features.

  Well I tried to download the update, but it would not install? I'll go through the events on the screen and maybe you can inform me as to why this update for the new Assistant support will not correctly installed, thank you.  Everything goes up to 4. Then it will skip "Download updates" and go on 5 /, but nothing happens?

  Point adjustment 1/restore... pass; 2 disk space / audit... pass. 3 / connecting to HP services for new updates and alerts... pass. 4 / download updates... N/a; 5 / install/apply the selected items... no?

  Should I have to uninstall the version that I already have the update through and re - install a new Version, or you have any patch that can be applied to make this update installs successfully?

  I have Windows 7 Home premium 64-bit.

  Hi DP - K,.

  I tried again since my last email with the problem where I couldn't find the program once it is downloaded, and alongside the race/Save little was downloaded files. I clicked on it and watched the sp54931.ex download in a folder "view and track downloads. I then told run this and asked that my administrative password. I thought here goes while I'm waiting for a response from you, nothing to lose to new and low and here is the update for the new Version HP Support Assistant downloaded correctly. Since then, I had a glance in the desktop program and there is no warning, everything is up-to-date.

  If all is well now and I can't thank you enough for all your help to try to solve this problem for me. You are the experts, and I was just lucky. I sincerely thank you.

  Best regards

  Gerry

  PS I will now know where to go if I have more problems... experts.

• Two Pavilion computers: HP Support Assistant Server error

  Two Windows 10 machines fully patched and works perfectly.  It is three months, the other four months old and up to date to win 10 version 1511.  HP Support Assistant worked very right up until two or three days ago.

  On both machines, if I check the version of product updates, HPSA scans for a minute or two and then warns the following-'server connectivity issues were found.  Please try again later. "If I have HPSA will search for messages and updates, nothing happens except that the analysis runs and runs indefinitely.  If you stop the scan, closed HPSA but then re - will not open unless the computer is restarted.

  HP may have a server problem, judging by some of the other jobs on HPSA and scanning.  However, this type of problem has developed before (years), and that could be a problem of jamming one of the newest latest updates Windows or Windows Defender antivirus definitions.

  I haven't the time to uninstall the updates to solve problems.  I leave alone HPSA and see if that sorts it.  If this isn't the case, HPSA can always be uninstalled.  You can get updates from the driver through Device Manager.

  Very busy at work.  I'll check in a few days to see if someone has something new to report.

  Dave

  Just ran Support Assistant on two pavilions.  Connected to the server to check updates and device updates and messages.  Worked well.  In my case, the question seems to have been resolved - to that for now.

• HP Pavilion Notebook N9R33EA # a: problems with the BIOS update (HP Support Assistant)

  I was offered an update of software SP77359, which seems to me to be an update of the BIOS provided by HP Support Assistant. Version F.82Ap1. Two days ago, I updated the BIOS via the support and, on the report wizard got an other update via the support Wizard. I applied this patch to find that it was still an other BIOS update and now, which has been applied this third update has appeared. Please let know us how I do.
  
  The model number of my machine is actually N9R33EA #ABU (as reported by the Assistant to support) but ths was too long to type in the name of the product.

  Your laptop is a HP Pavilion Notebook - 15-ab208na (ENERGY STAR) for later use.

  I wouldn't update. Simply click the X to remove the download and install the list in the help Wizard.

  The current version on your laptop support portal is F.8.1

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8942501

• A question about 'value spots' in the Vision Assistant of NOR

  Hello, all,.

  I am a new learner or vision.

  When I use 'mark set' in the Vision Assistant of NOR. It works well. for example

  

  (The image above is the example in the Vision Assistant of NOR, please see help > Assistant Solution > Inspection of dental floss)

  However, when I put the program NI Vision Assistant to create a Labview VI program. (Tools > create a LabVIEW VI), then run the VI, it no longer works.

  

  The result of the system of coordinates outside is always like that.

  

  I can't find where is the error. I tried a few other examples in the Vision Assistant of NOR. If the command "set mark" is used in the program in the Vision Assistant of NOR. then create the LabVIEW VI.

  The problem still occurs.

  I hope some man experienced in NI Vision could help me.

  Thank you.

  Hi all

  This problem has been reported under Corrective Action Request (CAR) 441410 and has since been fixed in 2014 of VDM. I highly recommend upgrading to the latest version here: www.ni.com/download/vision-development-module-2014-f1/4971/en/ because it contains other patches. If you are unable to do so, I have attached the patched file, you need to change. Replace the following file (assuming that the default installation location): \National Instruments\LabVIEW 2013\vi.lib\vision\Vision Utils.llb Assistant with the version I have attached here, and that should solve the problem you see with NaN values of reference in the VG of the generated code.

  Kind regards

  Joseph