ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

Similar Questions

• HP2310i: New (ASUS GEForce GTX 750Ti) graphics card does not not on HP 2310i

  Hi all

  Help, please! I can't get my new graphix card to work with my HP 2310i :-(

  Basic unit of HP: Pavilion

  Model: p6320uk i5 CPU 3 .2GHz

  RAM: 6 GB

  Screen: HP 2310i

  Windows: 7 (64-bit)

  Card: ASUS GEForce GTX 750Ti

  I swapped the old card and put in the new (I know what I'm doing with this as much before). Connect the plug of the correct video adapter for the graphics card is: DVD-D/VGA. Everything turns on and all I get is...

  DVI: NO SIGNAL

  VGA: NO SIGNAL

  I can't add the new GEForce drivers from the disk because it needs the map in situ.

  What Miss me? What can I do? I am doing something stupid?

  Help! :-D

  Thanks Jowler

  Jowler, welcome to the forum.

  You have shown two different models in your thread.  I used the p6329uk.  The reason that the video card does not work is that it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on January 15, 2010.  Therefore, the GTX 750ti will not work.  The last series of video cards that does not need UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Help! ASUS GeForce GTX 550Ti do not accept the Precision T3400

  Hey guys,.

  I've upgraded an abandoned T3400 I received through work.  I upgraded to a C2D E7400 to a C2Q Q9550, equip the new memory, a 60 GB Intel SSD which is my boot drive and tried to install a 500 GB Western Digital Caviar Blue makes clicking noise at startup and is not recognized by the BIOS or Windows.  But the main thing that interests me is why my T3400 does not recognize my Asus GeForce GTX 550 Ti?  It is listed in the BIOS and Device Manager in the form of generic VGA card with no. make or model number.  I tried to update the BIOS with software from ASUS site but I get an error message saying something in the sense of "this device is not defined in VBIOS.  I don't see where else to go and I would like to take full advantage of this card.

  Thank you

  Sorry,

  Device recognized now, close the message.

• P7-1240/UEFI/GeForce GTX 750Ti

  Hello

  I have an old P7-1240 of 2 years... it runs Windows 7.

  I just tried to install a card EVGA GEFORCE GTX inside 750Ti.

  Card fits very well and the HP screen comes up... but black screen then when Windows tries to start.

  Remove the card and return to the onboard video works fine.  I did this several times.

  From what I see to speak with the support of GeForce, it seems to be a problem of BIOS or UEFI.

  It doesn't seem to be a new BIOS version available from HP support.

  The machine supports UEFI?

  When you look at the boot sequence seems to me, that it lists sources of UEFI Boot.

  Also in the BIOS it seems not be anyway to disable the onboard video (as it is supposed to detect automatically).

  Map was new from the box, so it is unlikely that it is defective (especially since it displays welcome/BIOS HP).

  Help please, any ideas welcome!

  Sorry should have said it is with the card GeForce 660... did not yet try map 700 series since EVGA said that it would not work certainly.

• HP envy h8-1443eo: it works... msi nvidia geforce gtx 750ti games OC edition. 2048 mb

  I want to know if MSI GeForce GTX 750 it game OC Edition 2048 MB works on mine hp ENVY HP h8-1443eo desktop. and I don't know wht this means 1 PCI Express x 16 (Gen 3.0 for the i5 and i7 processors Ivy Bridge, all the other Gen 2.0)? Heelp please

  GelsuNvidia, welcome to the forum.

  After reviewing the specifications of your computer and video card, I think it should work.  However, the map is 9.84 "(250 x 128 x 37 mm) in length."  You must ensure that it will not go in the space provided.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Flashing LED and black screen HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  Processor i5

  4 GB OF RAM

  NVIDIA Geforce 2 GB VGA

  OS: WIndows 7 64 - bit

  I have a BLACK SCREEN (NOT SURE if IT REALLY TURNS ON or not) once I turn it on. The NUMBER of CAPS & LOCK lights flash three times with three second window and automatically shutsdown and turns on automatically. The LEDs blink with three seconds apart, keeping the machine on constantly.

  After checking according to this link

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01732674&product=1132551

  Checked

  Adapter CA / CC -works great

  BATTERY - does not load

  IT worked well had no warning on the battery (after a few days after the above mentioned problem I realized the battery does not charge)

  Interpreted Power Reset

  RAM (Memmory modules) -replaced New One (4 GB)

  It is based on the sequence of flashing of LED Memmory module errors. Reseating the modules memmory (2 GB + 2 GB) doesn't seem to work so I replaced it with a new (4 GB).

  I hope that this has nothing to do with the battery. This does not solve the problem.

  Appreciated if someone could help. Thanks in advance

  Hello

  Unfortunately the "blink" codes are not always an accurate indication of the actual error, so this may be one hardware failure of another component on the motherboard.

  Try the following.

  Shut down the laptop, unplug the AC adapter and remove the battery.  Follow the procedure begins on Page 52 of your Interview Guide & Service to remove the battery from the RTC.

  Press and hold power for 30 seconds and then leave the laptop for 15 minutes.

  Exchange your module memory 4 GB in the other available slot.  Reinsert the RTC battery, replace the cover, plug the power adapter ( Let the main battery at the moment ) and try to start the laptop.

  Any change?

  Kind regards

  DP - K

• HP Pavilion TouchSmart 15-b100: "Press the ESC key" black screen TouchSmart 15-b100sa

  Hello

  I'm helping a friend with his computer because his son decided to play with it and now it is unclear what steps it took to create this problem.

  Initially, he asks a password on a black screen before opening the BIOS screen.

  Someone in this forum helped me with this problem and told me to try a code which worked perfectly.

  After that, I get a black screen that repeated me "press ESC for Boot Menu".

  If I press this button, a message appears saying "ESC...". Starting break"and stays there for about 2 minutes, which I think it's a lot of time to open the start menu to enter the BIOS and change the settings.

  Does anyone have any idea of what's going on?

  The computer is a HP Pavilion TouchSmart 15-b100sa Sleekbook

  I would appreciate if someone could help with this problem.

  Thank you

  Hi @jc4 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion TouchSmart Sleekbook 15-b100 and issues with maybe an update. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Here is a link to computer won't start for Windows 8, if you need it.

  Please let me know how it goes.

  Thank you.

• HP pavilion hpe h8-1020: evga geforce gtx 950 in hp pavilion hpe h8-1020

  Hello guys I have a hp pavilion hpe h8-1020 and I am looking to upgrade to a nvidia gtx 950 is it compatibile, what I need to supply?

  Hello

  There is a unknown specification for your motherboard that will prevent you from installing a new 3.0 PCIe x 16 graphics card. Maps 3.0 is backward compatible with PCIe x 16 2.0 slots. Your motherboard may have a PCIe x 16 1.0 slot. None of these options below works on your PC if you have PCIe x 16 version 1.0

  The Radeon HD 6570, an option to purchase, is a PCIe x 16 card USB2.0. You can have a 2.0 slot. It is unclear when we look at the characteristics of HP for your PC.

  I got a HD 6570. You could not install drivers from AMD with the version of HP of this card. You need to use the HP drivers. It is possible that this card is not a 2.0 card even if the consumer version is a USB2.0 card. We can only guess.

  MSI is rolling out hybrid Nvidiacards soon. Try anything tangible yet seen. NVIDIA is slowly releasing the 1000 series cards that require less power. Maybe some OEM will also include hybrid versions that will work on your PC any time.

  The 900 series Nvidia graphics cards need the UEFI BIOS.

  Your PC has a legacy BIOS.

  You have a 300 Watt power supply. You will have to upgrade from food to run a card AMD and respect the strict minimum if you can install a TG 640 GDDR5 map.

  You may be able to install (you need a PCIe x 16 slot 2.0) Nvidia 600 series cards or watch hybrid of AMD cards by Sapphire.

  AMD cards are longer and require larger power supplies.

  You should check that you have the power and the room to install two graphics cards. The cards are also double slot. You will need to verify that you can install a card double slot. Even once, you need a PCIe x 16 slot on the motherboard 2.0.

  See you soon!

• Z440 HP: HP z440 added EVGA GeForce GTX 750Ti and now stuck on bootscreen HP logo

  I have a Z440 workstation with nvidia quadro K420 inside graphics card.  I bought a Samsung 4 k refurb monitor and bought the next video card: http://www.amazon.com/gp/product/B00IDG3PRI/ref=od_aui_detailpages00?ie=UTF8&psc=1

  I added the second video card and the machine starts with the HP logo and never produced.  Remove the video card and I start fine.

  The BIOS indicates V01.25 M60 - 30/01/2015.  I tried to update the BIOS since last download on HP website (http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=wk_144911_1&swEnvOid=4158#tab1) and it tells me that I am current.

  Attempted to disable SecureBoot in the BIOS without change.  I start to assume that this video card is not compatible with the machine?

  If this is not the case, can you recommend a compatible video card?

  Other important information:

  Intel Xeon CPU E5-1650 v3 3.50 GHz

  32 GB ECC RDDR4 / 2133 MHZ

  Hello

  Remove the original graphics card and try the GTX 750 in the housing where the original graphic card.

• The Videocard, Asus GeForce GTX 650 and 750 of GeForce GTX are compatible with after effects CC? Apologies for my English.

  I'll buy one of these, but I urge confirm if one of them is going to help me with Newest after effects CC. Thank you very much.

  This page lists the technical specifications for After Effects.

  After effects is not really using the GPU for many outside of renderer traced to obsolete RADIUS (see here), if one should be fine. Some effects of the third party, as VideoCopilot 3-d element, make use of the GPU, but their needs are different from the AE and if you plan to use them, you must check their needs before you buy.

• Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

  Hello

  I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

  Any ideas?

  Hello!

  Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

  A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

  However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• Pavilion dv6-2140ei. Missing driver problems and blue screen.

  Hi, I'm florent

  I have problem devices on my PC which I think might have caused the blue screen issue.

  Base system device:

  1. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 03E4
  2. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 04E4
  3. PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 91078216 & 0 & 01E4

  MEDIA:

  1. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0001
  2. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0101
  3. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0201
  4. HDAUDIO\FUNC_01 & VEN_10DE & DEV_000B & SUBSYS_10DE0101 & REV_1001\5 & 423D 040 & 0 & 0301

  Unknown device:

  1. ACPI\ENE0100\4 & 23038812 & 0

  Please help, I would really appreciate it.

  Hello:

  Here are links to the drivers you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75510-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75076-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4105332 & sw_lang =

• HP Pavilion Notebook-15-p157sa: SLOW STARTUP AND SLOW STOP AND BLACK SCREENS

  Im having a problem with my laptop. Startup is so slowww and closing too I have disabled startup items but did not help. Also when I opened my notebook from sleep, she stays on a black screen, I have to make a difficult stop in now power button for 10 seconds or leave battery (I stopped taking it because if it is damaged). Please help me HP.

  EDIT: THIS NEVER HAPPENED IN WINDOWS 8.1 (64-BIT)

  Factory fixed reset

• Just installed CS5 - all files I opened presents itself as a BLACK screen

  I'm a complete novice (been using PhotoShop 6.0 until today).  All files I try to open (.tif .jpg .psd) I can't see the photo - can only see BLACK in the window.  File name shows very well.  Under "Layers" next to "Background", I see the thumbnail of the photo.

  Just paid $700 for this freaking software and I was waiting with the helpline horrible for an hour and a half.  I am beyond frustrated.  It's probably something simple, I don't know what the problem is.

  Thank you in advance for your help!

  You can disable OpenGL drawing for now to avoid the problem. (then restart Photoshop to be sure)

  But the cause is a bug in the driver of your video card, and you must update your video card driver to pick up bug fixes.

  In addition, get the driver updated from the web site of the manufacturers of the GPU (NVidia or ATI), not the computer or the web site of the manufacturer of Council.

• Pavilion i7 h8-107uk: Asus GTX 750ti on i7 graphics card installation problem

  Pavilion i7 [email protected] (2011)

  Try to upgrade graphics GeForce 545 again card ASUS Geforce GTX 750Ti.

  HI - after the installation of the new card, I get a blank screen after the initial configuration of blue screen. I've already read of different threads detailed on exactly that but don't know what to do.

  I have a few options of what I can understand.

  1. a thread tells me how to get into the Setup menu and 'disable secure boot' - others tell me it won't work not (?)

  2. Another very detailed thread says I must upgrade the BIOS to version 8. I just did an update via the HP support, but it's still version 7 - automation leaves me not install a newer version - not even sure if I should or how to (?)

  3. There is another thread;

  Hello

  Interesting quotes, probably some from me.

  Here's another thought for you.  Graphics cards same "not all graphics cards work in all PC" that work in a particular PC will not work in fact similar or the same exact model.

  Looking for a NVIDIA 660 or 670 and a power supply correspond to the recommendation made by the manufacturer of the graphics card.

  BTW - you probably won't see a BIOS version 8 for Pavilion models with the processor i7-2600.