Help! ASUS GeForce GTX 550Ti do not accept the Precision T3400

Similar Questions

• HP2310i: New (ASUS GEForce GTX 750Ti) graphics card does not not on HP 2310i

  Hi all

  Help, please! I can't get my new graphix card to work with my HP 2310i :-(

  Basic unit of HP: Pavilion

  Model: p6320uk i5 CPU 3 .2GHz

  RAM: 6 GB

  Screen: HP 2310i

  Windows: 7 (64-bit)

  Card: ASUS GEForce GTX 750Ti

  I swapped the old card and put in the new (I know what I'm doing with this as much before). Connect the plug of the correct video adapter for the graphics card is: DVD-D/VGA. Everything turns on and all I get is...

  DVI: NO SIGNAL

  VGA: NO SIGNAL

  I can't add the new GEForce drivers from the disk because it needs the map in situ.

  What Miss me? What can I do? I am doing something stupid?

  Help! :-D

  Thanks Jowler

  Jowler, welcome to the forum.

  You have shown two different models in your thread.  I used the p6329uk.  The reason that the video card does not work is that it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on January 15, 2010.  Therefore, the GTX 750ti will not work.  The last series of video cards that does not need UEFI was 640 gt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

  Hello

  I recently tried to install a 750TI Asus GeForce GTX on my HP Pavilion P6 2010UK using a SATA 6-pin PCI Express power connector, but after starting I get three beeps and a black screen. Can someone help me with this please?

  As an observation, the PC was working fine before you install the new card.

  Hello

  Many of the graphics cards NVIDIA GTX 750 will not work in the HP PC that do not have a BIOS version 8.  Your PC has a BIOS version 7 and I do not expect HP to publish a version 8 BIOS for your PC.

  Return the card and try one of the models that should run on a PC equipped with a legacy BIOS.

  MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF

• cannot activate Lightroom 5.0 on my new mac. do not accept the license code. Help, please

  Hello

  I plant my lat on December mac book and got a new

  but lightroom does not accept the serial number, so I can't activate the software...

  What should I do?

  Thank you

  Hi Colorblind + brothers,

  Just in case you get a message stating "this serial number is not for a product calling it ' him see the document below:

  Error: "this serial number is not for a product calling it" | Adobe Creative Suite

  See also,

  Invalid serial number error

  Error: "serial number is not valid for this product". Adobe Creative Suite

  Let us know if that helps.

• Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• IPhone does not accept the code to check for text messages

  II phone does not accept the code verification for the transfer of messages text imac

  Maybe these articles will help:

  Get a verification code and connect with authentication to two factors - Apple Support

  If you don't receive your check or reset email - Apple Support

  If this is not the case, can you explain a little more detail what exactly is your problem?  Or see the 'Contact us' at the bottom of the second article.

• iPad does not accept the new password for the new internet provider

  Installed new Internet link service - century. IPad will not accept the password written on the modem. How can I connect to wi - fi with this situation?

  Can you connect to the Wi - Fi connection with another? The problem may be with the password. Read this article: If you need help with your Wi-Fi - Support Apple password

• On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

  My old Thunderbird e-mail account has been with Time Warner,
  SC. RR.com. my new second account) is with AT & T, ATT.net.

  In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
  My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

  How to make 'list' to work on my new ATT account?

  I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support!

• Re: Failed on nine L510 Vista admin password - does not accept the admin pass

  Hi all

  Completely baffled by this one so would appreciate any advice.

  I just bought a new Satellite L510 with vista hard disk installation.

  I went through the installation process long and eventually got to the point where I could configure my admin account and the name of my computer.

  I chose the name of my admin account and typed in the password and confirm the password and named my computer.

  Now when I get to the initial Vista logon screen, it does not accept the password I am entered (and confirmed).

  This can be a problem with caps lock, as the password was all numbers.

  (the password was all numbers and five numbers)

  It, however, gives the correct indication for the password that I entered. It does not accept the password.

  I would be happy even just redo the installation process, but I have no idea how to do this, because I can't even a quick command-line anywhere.

  Help, please!

  It's strange. You can log on using a different user name?

  In any case to run recovery, you either:

  * Press and hold zero during the power upward
  * Press F8 before Windows starts to enter the Windows Start Menu, then run recovery of the option "repair your computer". http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• My computer does not accept the print command.

  My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

  Sherimcfalls,

  1. what operating system is installed on the computer?
  2. the problem occurs with any particular application?

  Method 1
  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  Try to set the default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

• Flight Simulator FS9.cfg file does not accept the changes

  I am running Msft FltSim2004 under Windows 7 Professional. I had to make additions to the FS9.cfg file (it takes changes in txt in Notepad). It is a hidden file located in C:\Users\{my name} \AppData\Roaming\Microsoft\FS9. After that I have to make the changes and close the file, and restart FltSim, I still get the error that the change was supposed to eliminate FltSim. When I check FS9.cfg, the change I've made is no longer there.

  I changed all the c:\ folder permissions down to FS9, as well as the permissions in the FS9.cfg file. But it still does not accept the changes. Everything else works fine under Win7. Any suggestions? Thanks in advance for your help.

  Art

  Art,
  Try to copy the file to your desktop (or another folder), and then delete one located in the FS9 folder.  Make the changes to the copied file and simply save it to the new location.  Reopen the case to check the changes remained, and then copy it in the FS9 folder and test.  Let us know the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error in partition Acer Iconia B1 does not accept the update.

  My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

  ERROR:-invalid partition setting
  17: 238e8000:888e8000 of fat
  Instalation aborted.

  The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
  Can you help me?

  A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

  Download the patch

  Iconia B1 - A71, install the USB 2.0 driver - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• EA6350 not accept the password "admin" little matter I have reset the router device.

  Hello

  I just brought a new EA6350 router and it does not accept the 'admin' to connect to the router. I have reset the router and can ping 192.168.1.1. Also able to enter in the login screen. But the default password: admin has not been the success you want to connect.

  Help, please

  Hello Sir,

  I've been using google chrome to run the installation program. It failed and when I use IE and followed the same steps, it has worked well.
  You have so much