at startup, the computer cannot display anything, just a mash of white and colors

Similar Questions

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• restrictions on the computer. cannot use windows defender etc.

  restrictions on the computer. cannot open windows defender etc ive to contact the system administrator. don't know how to do

  restrictions on the computer. cannot open windows defender etc ive to contact the system administrator. don't know how to do

  Hey janet beggs

  some tips for you about what can cause problems of Defender

  If you use norton avg avira mcafee etc microsoft security databases they automatically disable the vista version of windows defender

  This is done intentionally to avoid conflicts between programs

  If the above does not want to let us know

  If the administrator is required for the programs to run, you right-click on its icon and choose Run as administrator

  Walter, the time zone traveller

• Is the latest version of PS CC backup files when the computer is hardbooted? Just try to know if occult Microsoft my computer so that he could perform an update (Win 10 of course)

  Just try to know if occult Microsoft my computer so that he could perform an update (Win 10 of course)

  I got the 4 files to open, air conditioned and have several changes and was going to save all changes when my screen went black. I had to hard - boot the computer.

  After doing Windows 10 made updates and the computer restarted with the PS and the 4 unsaved picture. When I went to save the file name

  had the word 'restored' added to it.

  If you have documents open in Photoshop and changes.  If you have your photoshop preferences file manages the automatic backup settings. Each automatic backup recovery period a recovery file must be written for these documents.  If your Machine is blocking you the original files of documents, either still on you computer unchanged if you have not any saved on them.  When you open Photoshop, it should see recovering files it save on your documents. These recovery files will all have the update you do to your documents and writings in recovery files. However, any changes made after this last period of auto backup is not there.  You lose these updates and all the States in the history of Photoshop that existed prior to the accident.  Photoshop automatically opens all files in recovery, so you can get as much work as you can.   When you save them and close documents or close without saving the document recovery files are deleted.  Normally when you close Photoshop there are no open documents and therefore no recovery file.

  Windows Update not mess with the application files or applications.  It is always better not to run applications when windows update is running.

  

• The website cannot display the page

  Hello
  
  I create a custom component and add it to project as a library, when I add to the page, and then deploy it (successfully deploy) the result page will be empty *(The website cannot display the page) * without exception, have idea about this problem?
  
  Note that I use JDeveloper 11 g & ADF

  Have you looked into the app server logs? You really do jsf components custom or do declarative adf elements? What is your code looks like (all of it)? You app was working before you put the reference in our custom component? What is your hat size?

• I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• This product key for Vista Ultimate is for 2 users; the computer tells me that it is already in use, and it is the second computer. Then I don't understand what the problem is.

  product activation key

  This product key for Vista Ultimate is for 2 users; the computer tells me that it is already in use, and it is the second computer. Then I don't understand what the problem is.

  There is no such thing as a ' 2 License User"for Windows.

  It * may * be for 2 processors. These 2 processors MUST be on the same physical motherboard.

  You use WIndows out-of-contract of license and will have to purchase a new license to the second machine.

• Cannot start the computer with DISPLAY of ERROR: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102,

  last time I connect, the NTFS has been runs a check and then close my computer with a SCREEN of ERROR and the COMMAND SCREEN CHECK BONES. All the time when I used the F8 key, it has not started safe mode and all. When I used F10 and F12... He made a QUICK and FULL TEST and said my hard drive 'PASS'... but no way to start the computer. The DISPLAY of ERROR says:

  --------

  Disable or uninstall an anti-virus, backup utility disk defragmentation. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  Stop: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102, 0 x)

  ------

  Help, please! as I have not set up disk or CHKDSK with me. granted access via another computer. My question is: can I download a service pack 3 or installation to start XP Professional, on a USB to do - turn off the anti-virus, backup utility, disk defragmentation?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-xp-startup-error-stop-0x00000024/a15138c6-4be1-483d-b6db-e9d8db853d5b

• Computer stuck on error at startup "this program cannot display this webpage".

  Original title: Computor stick on error.

  When I start my windows xp, it goes through the normal process and goes straight to the "this program cannot display this webpage". Then, it freezes on it. How can I erase this.

  Hello

  I'll start by saying that, although I have met exactly the conditions you describe with the PC to one of my clients just yesterday, what may not be your problem.

  The problem was my client was caused by the weelsof.c Trojan horse.

  Attempts to start in SafeMode only a restart after a few seconds. Isn't the same case for you? Normal boot gave exactly the symptoms you describe.

  Somehow, I suggest that you look for the virus. I couldn't do it with the infected PC, so I had to remove the hard drive and a disinfection in another PC. I checked for the virus in turn with MSE, SAS and MBAM. The MSE analysis found and removed two files associated with the Trojan horse weelsof.c. The SAS and MBAM scans showed no malware. After re-installing the drive on the original PC it started as a customer would normally expect and another scan MSE (after leaving it connected to the internet for several hours) was also negative.

  If you cannot start in safe mode to scan malware for yourself, my methods may be practical for you, in which case a repair shop is your best bet, ideally one that you can get a recommendation for.

  Tricky

• Icons displayed incorrectly at startup, the computer is unusable for several minutes

  My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

  When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

  This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

  http://support.Microsoft.com/kb/929135

• How can I prevent the Win7 installing display drivers just after starting?

  My main use of this particular computer is Microsoft's Flight Simulator X. It's a title 3-4 years and it works better on the 182.5 nVidia drivers than it does on the last drivers out there.

  I just got an ATI card and I'm replacing a nVidia card. I uninstalled the ATI card, used Driver Sweeper in safemode and jumped in the nVidia card. Unfortunately, Windows installs a driver, I don't want to as soon as I get in windows.

  I have disabled the Windows of any kind (temporarilly) updates, but it still happens. Searching on Google I found a solution that starts with-
  -Click Start
  -type in gpedit.msc entered press...

  Unfortunately gpedit does not seem to be on my system, so it stops there.

  I absolutely need the old version of this driver and there must be a clean install not on top of another driver so if anyone knows how to stop the auto install it please help. I spent far too much money on this sim card to be stopped by the present, and I don't want to go back to XP at this point.

  Thanks in advance,
  Rob

  Oops almost forgot I'm on Windows 7 64 bit.

  ----------------------------------------------------------------------------------------------------

  Edit - Ok in another post here to solve another problem I've seen one person say to uninstall a driver, reboot and cancell the automatic installation of the new driver...

  My problem is that I do not get the dialog box who says it's installing drivers or one that will allow me to stop the installation after I type my password and press enter (log in). After you have clicked on enter it is less than 10 seconds before a dialog box tells me that I must restart to complete the installation. Never thought that I would complain that my ' computer is too fast, LOL!

  If I uninstall the video driver, start in safe mode, run driver Sweeper to get all the bits that are missed, restart back in safe mode I can again install the new drivers (older) then in safe mode? I've never tried something install with safe mode before, so I don't know if it is still possible or recommended.

  Any ideas would be greatly appreciated,
  Rob

  Hello Samhrutha G,.

  Thank you for your response. I think that your solution would work if Windows has never had the nVidia system driver, but because he did it (from when my settings were to allow updates) install regardless of my settings in the Windows Update settings. You see, I had (temporarilly) the value of this parameter to never to let Windows download and install updates but he ignored that (I tried with your settings too).

  I think I found a solution, but I could be wrong in my understanding. This is my thoughts when you uninstall a video card driver and restart with no 3rd party drivers on your system, Windows uses its driver 'Standard VGA '. I'm not sure but I think that it is the State in which we look after using something like Driver Sweeper in safe mode. Just the driver VGA Standard, this way a clean install of 3 third-party drivers can be made.

  What I did is to use Device Manager to access my VGA card and selected the option Update my driver from a list of drivers already on my system. It gave me the choice of GTX 275 nVidia Driver installation or driver VGA Standard. I chose the standard and restarted. After the restart he tried to update that I don't want, so that's good.

  My next steps will be to start in safe mode, run Driver Sweeper to clean the remnants of the nVidia Driver, restart, leaving the sytem completely load and then reboot again. I wil then install the driver nVidia of my choice.

  If I'm right that which users are usually trying to accomplish with the method Driver Sweeper is Windows just use is driver VGA Standard then I have all good and my card will work better than my old less powerful card (which is not currently the case). I think I'm right because Windows would need some kind of driver to display anything on the screen at all which I assume is his 'Standard VGA' driver.

  Please someone correct me if I'm wrong I typed all this out in the hope of helping others with the same question.

  Thank you once again Samhrutha I thank you for taking the time to offer your help.
  Rob