Vista64 started going to JDM black screen cursor

Similar Questions

• At the start of the laptop goes to a black screen and says invalid partition.

  Original title: can I PRO 1-2cpu (IBM Laptop) Xp.

  • Not long I Formated my Windows XP PRO 1-2cpu, thinking that he would have run faster, not a blue screen crash and eliminate any viruses that could in fact, now that its formatted I can't use, whenever I start the laptop it goes to a black screen and says invalid partition, I don't know what that means though.

    so my question is there a way I can restore the computer back to normal? However, I don't have a recovery disk.

  A lot depends on how reformat you your hard drive.  Most manufacturers have a recovery partition on the hard drive that can be used to reinstall the operating system. Access you this by pressing a button that appears briefly at the beginning of the boot process.  If you have reformatted the drive c: partition only you might be OK and can get by using this recovery partition.  Otherwise, if you reformatted all the hard drive, then your only alternative is to get a Windows installation CD, boot from this CD and reinstall Windows.   Contact your computer manufacturer for advice.

  HTH,
  JW

• Restarted my computor it goes to a black screen and wants to enter either windows vista or press f8 after you download updates from windows

  Original title: when I grew my dell desktop computer up inspiron 530 and windows vista home it goes to a screen that wants to get me things I don't know what I have to enter secure mode or windows vista

  I do not have ubdersand when my computor restars it goes to a black screen wants to enter or f8 for windows vista or press am I something wrong, after I check my restar updates too after that I think they are downloaded

  Hi ISSYHenico,

  1. you receive messages or error codes?

  This problem can occur if updates failed to install.

  2. are you able to boot into normal mode if you select Windows vista?

  Method 1:

  Step 1:

  Otherwise, try to start in safe mode and perform a system restore and check:

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you can start in safe mode, then you can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Once you're able boot in normal mode, try the following steps:

  Method 2:

  Step 1:

  You can view the history of update for updates failed which is causing the problem.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  You can try to install the updates manually from the Microsoft Download Center download and check if it helps.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

• my laptop turns on and immediately goes to a black screen with a request for password

  my laptop turns on and immediately goes to a black screen with a blue pop up asking you for a password.

  Getting started doesn't let me go to F2 or F11 or F12.

  THE SCREEN STOPS JUST AFTER 3 ATTEMPTS.

  Help!

  I don't know who installed it but I can't use my computer. (I have teenagers, and no one will admit to it)

  Sounds like someone put a hardware/BIOS password on your computer.  You see the Windows logo?  If this isn't the case, then you must know about this, which has put the password and have them removed.  If we cannot help you.

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Try to install Windows Vista. When the system starts, I get a black screen with no message and no prompt.

  before starting up the plant, black screen

  A friend gave me the laptop since they bought a new.  I tried to do a clean install of Windows Vista on a laptop Gateway P6831 FX.  After changing the boot order in the bios settings, the dvd starts to spin.  The only thing that appears on the screen is a screen black/Bank.  I'm never invited with the message 'Press any key to start the installation' to start copying the files for vista.

  The Bios recognizes the hard drive (Sata).  I don't know what to do at this point.  Help, please.

  I fixed it.  I looked at a few other responses in this forum and used the SATA drivers during the installation of Windows XP.  After that, I've upgraded to Vista.

• Hello, I have a problem, after the effects of the charges or starts with a full black screen. Help, please.

  after effects 5.5, mac pro

  After starting with a full black screen-edge. Then I have to force quit. Thank you

• Q powers on then goes to the black screen

  I went to the site of motorcycle and tried to upgrade my software an error message since then my only Q power on when the battery is removed and reinserted. I can see the microsoft screen, the verizon and it loads my home screen so I can see my wallpaper, but it crashes when loading from here then goes to a black screen. It will not charge or show connected to my PC. I went only to upgrade my software cuz the guy from verizon has suggested that and now I have to buy a new phone... sucks for me

  Yes, please get the serial number at the back of the phone and post it in your profile.

  To do a manual reset. Switch the phone off. Then hold the central selection button and then press the power button. Keep holding it until you see something that says Master Reset, Yes (left softkey) and no (right softkey).

  Mark

  Support Forums Manager

• HP G72-227 WM won't boot to Windows 7. Goes to a black screen with a cursor.

  My laptop is a little older than a year.  Operating system is Windows 7 Home Premium. When you try to start, F11 to get to Recovery Manager does not work. It's just a black screen with a cursor.  The version of the BIOS F.17. Conducted tests of diagnostics and everything going on.  Lost my boot drive. Borrowed from a friend but it is not going to fix the problem. When you run the Startup Repair tool, it is said that if you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer.  There is no device connected but it keeps coming back.  System Restore has tried the borrowed boot disk and it does not restore the message gives that an unspecified error occurred during system restore. (0x8000ffff).

  Hello

  If you still have the startup disk that you have borrowed, boot from it again, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the startup disk and try to restart the laptop.

  Kind regards

  DP - K

• Computer Dell Vista goes to a black screen with a cursor blinking while booting

  I've been on the internet on my Dell computer that it has stopped working altogether I turn the computer off the wrong way, and not when I tried to reboot, it goes to the bios screen that turns black with a flashing _ crusor. I tried pressing F8 etc, but it does not work. Anyone know what I need to do?

  Original title: I need help! My dell doesn't work anymore

  Hello

  See if that helps you.

  "How to run Dell 32-bit Diagnostics utility"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  If nothng fix it, you can reinstall Vista.

  Reinstall using the internal recovery Partition.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  Reinstall using the Dell recovery disk.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  Reinstall will wipe all data from the hard drive.

  See you soon.

• MY COMPUTER DOES NOT START, NOT EVEN WHEN YOU TRY TO PUT IT IN SAFE MODE, EVERYTHING GOES TO A BLACK SCREEN, PLEASE HELP ME!

  OK, so last night, my computer was freezing up so I held the power button down to turn off, I turned it back and he asks me if I want to start in safe or just normally.  I chose because it starts as usual, it's just sitting there, it goes through the motions as it will start but it never does, I went to sleep woke up to the top and all I have is a black screen with mouse pointer again, nothing has changed, the same things happen when I try to start it in safe mode.  I tried to get the disks it is came up with, but the computer seems to not even acknowledge that they were never inserted, I don't know what to do, can anyone help me, I'm sitting here on the laptop of my bf and I am interested in this black screen with the pointer of the mouse in the Middle, I don't know what to do...

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

  As indicated in the title, I bought a ti 750 gtx.

  N750Ti-2GD5/OC

  The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

  The system is a h8 1203, with a power of 460.

  I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

  Hello

  If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

  Don't forget to create a set of external support of HP recovery before installing a new operating system.

• Everytime I try to log in its just goes to a black screen with the cursor on my laptop Windows 8.

  * Original title: Admin Login

  On my laptop Windows 8, I can't connect to my admin user or even use my administrative password. Whenever I try to open a session in his will just a black screen with the cursor, and when I try to use my password it dims the screen and I can't do anything. Is there anyway that I can fix this?

  I solved the problem by resetting my laptop using the recovery mode.

• G10 - 133 started booting with a black screen

  Hello

  I was wondering if anyone could shed some light on a problem I have.
  About 3 months ago my G10 starts with a black screen startup. I can hear the sound and all qosmio logo. Just impossible to see anything. So, I pushed FN + F5 and it would show the windows xp loading screen. But when it is started in windows. It would be a very low resolution display. So I have to change or push the tv out button twice and it would auto resets.
  I was in the bios and changed the beginning of the analogue lcd + rgb display and which will show that during the boot process, but continues to be carried out in low resolution windows.
  And if I plug in an external monitor, the two, they just empty.
  I tried to re-complete installs, qosmio Player re - install. NVIDIA driver, hotkey utility, display change. But still nowt.

  Someone at - it had similar problems? And if yes, could you remedy this?

  Yes, I had this earlier on my G10 and this was the beginning of more serious problems. The machine has started to behave more strangely, and it has gotten worse over time, insofar as it would lock up when you watch DVDs and qosmioplayer software has stopped working completely.

  I don't know if you have the same problem, but I took for Toshiba technicians and machine ended up going back to them for an overhaul of the system board. = problem solved.

  Oddly enough, one of my friends has had exactly the same problem and went through the same process to return the machine; I don't know if it is a problem that affects all G10s!

• My Satellite L505D goes to a black screen after startup

  It seems to boot up properly and everything. It starts Windows 7 and goes to the user selection screen, but since there is only 1 user, it only says: Welcome to the loading circle. But when he tries to load the page office or home or whatever you call, all that happens is the mouse.

  I can move the mouse normally, my anti anti-virus pop ups see the place if necessary. On my last attempt to try to solve the problem, I got my user to open the file, but has happened automatically. I tried taking the battery twice thing. If any ideas on why the screen just looks like a black screen and the mouse visible.

  PS: I use the keys ctrl + alt + del function to get these options appears.

  On this virtual path, it is not easy to understand why all this is happening, but what you can try is to start the operating system in safe mode and roll back the OS to an earlier time to see if it works.

  Can you please try this and post comments.

  Do as a first step. Later, we see what can be done.