at the DB level traffic prioritization

Similar Questions

• How to get a variable of a sub - VI all the way to the top level vi (GUI)

  Hi all

  I am currently working on controlling the movement of the six axes with labview through RS232 communication. These axes are controlled in order so not more than one axis moves at a certain point in time. To do this, I need to query the axis status bit to see whether or not the move is done. Basically a while loop to stop "asking" for the State when the statusbit is '1 '. This is done by a somewhat deep nested vi in software architecture (low level vi). The behavior of this vi is necessary because it blocks the execution of the remaining vi until the movement is finished. Therefore, I am sure that no command is sent to move a second axis during the movement of the axis of another.

  I want to do is to bring the traffic all the way to the front of the user interface so that the operator can see if the axis is in motion or not. But the problem is that the vi that handles these requests status only publishes the output data when the while loop stops, in this case when the movement is completed. And I would like to know the status on a regular basis, for example every 100ms or so?

  How can I get the value of the bit on the status in the GUI? I have to place another vi on the upper level which requires also that the status?

  Any help is much appreciated,

  Best regards.

  You can pass a reference to what ever VI main control/indicator panel you want to display it on.  Then in your Subvi loop, use this reference with a knot of property value for updating control/indicator light panel.

• queries of the same-security-traffic command

  Dear experts,

  I wonder if put in the "same-security-traffic intra-interface permits" or blanket orders 'same-security-traffic licence inter-interface' will make the traffic to "bypass" the ACL for the interfaces with the same level of security?

  Your response is much appreciated.

  Glenn

  The short answer is Yes if there is an access to the interface list then there must be an entry allowing traffic to be allowed back.

  For more details, take a look at this document.

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a0080734db7.shtml#T5

  HTH

  Jon

• ESXi 5.5: Enhanced Capture packets at the host level

  Can someone explain how to use this new feature?

  Capture packets of improved host-level

  Network troubleshooting requires various sets of tools. In the environment vSphere VDS

  offers standard of monitoring and troubleshooting tools, including NetFlow, Analyzer SPAN (Switched Port).

  Remote Switched Port Analyzer (RSPAN) and encapsulated remote Switched Port Analyzer (ERSPAN). In the present

  release, an improved host-level packet capture tool is introduced. Packet capture tool is equivalent to the

  tcpdump command line tool available on the Linux platform.

  Here are some of the key features of the packet capture tool:

  • Available as part of the vSphere platform and can be accessed through the vSphere host command prompt

  • Can capture traffic on VSS and VDS

  • Captures packets at the following levels

  -Uplink

  -Virtual switch port

  -- vNIC

  • Can capture packets ignored

  • Can follow the path of a packet with details of time stamp

  Cannot find documentation for this tool and tcpdump-uw is exactly the same as in 5.1.

  The new command is run on the host computer and is called pktcap-uw, I just finished writing a blog post about it here

• Auto micro adjusts the input level

  Hi all

  I tried this several times and never seem to be able to find an answer that works...  When I talk in my microphone on my macbook pro, it adjusts permanently the input levels, so in mid-sentence volume varies (always at peak).  It is extremely annoying, and there seems no obvious way to a certain volume of recording.  Any help here?

  Thank you!

  Hi Aprilstern,

  I understand that the input of your Mac's built-in microphone volume seems to be fluctuating when you save. In this case, if you use Mac OS X Yosemite or earlier, you may want to turn off noise reduction in system preferences > Sound > entry.

  OS X Yosemite: adjust the settings of your computer's audio input

  Kind regards.

• How can I make a permanent change in the zoom level?

  I want to know how I can make a permanent change is the zoom level? I don't want to constantly have to change the default value of 100% whenever I go to another page. Thank you.

  Hello

  You can also use the NoSquint add-on to change the zoom level by default for all websites at the same time. After setting your zoom level, you can adjust the zoom on different sites and set the options for NoSquint remembers the settings for each site.

  After installation of NoSquint, go to the Add-ons page to define the settings for each site:

  • Tools (or

    

    ) > Addons > Extensions

  • Click on the button 'Options' of NoSquint

• Change of Cupertino weather information at the local level

  How can I change the Cupertino weather information at the local level?

  Hello

  On your iPhone, in the application of the watch, go to: Watch My > weather > default City > choose the current place of residence.

  On your iPhone, go to: settings > privacy > location Services:

  • Ensure that the location service is enabled.
  • Sure Apple Watch is face value while it helps.
  • Check the weather is set to always.

  On your iPhone, go to: settings > general > background App update:

  • Check that the bottom App Refresh is enabled.
  • It can also help to activate the setting for the weather.

  If you also want to remove Cupertino in the list of selectable, fixed locations:

  • Open the weather app on your iPhone.
  • Swipe left on Cupertino to remove it.

• Record the volume level of Youtube in private browsing

  How can I save the volume level Flash in private (in sites like Youtube) navigation mode?

  Thank you.

  Not that I know of.
  
  You're also on Windows XP and this platform has a setting of overall volume for all applications and not a setting by application, as later versions of Windows.

• Q: I have transferred all my iPhone 6 more apps to my iPad Pro. When I went in Clash of Clans I expected to be at the point, (level) I am with my phone?

  Q: I have transferred all my iPhone 6 more apps to my iPad Pro. When I went in Clash of Clans I expected to be at the point, (level) I am with my phone? Rather than start from the beginning!

  Any tips?

  Are you signed the same center of game username and password?

  The other thing I can think is clash of Clans a universal application? The button 'get' was a sign? If it isn't then you can play a different game... by that I mean, there's game has scaled for iPHones and game set B nationally for iPads... they have the same game but different - just like a cover can be the same brand and color but different model for different iPads.

  You can contact the support of the COC and see if they can transfer progress from one device to another or if there is something you need to do to move your progress to the wire

• Satellite Pro U200: dark shadow with the lowest level of brightness

  Hello

  Now, I have another problem with the display of my U200:
  In the lowest brightness level, there is a dark shadow on the left side. I can see it after a few minutes of work at this level of brightness. Two months ago the display has been repaired or replaced by TOSHIBA.

  You know this problem or could someone test it please if this is normal or not? In the other levels of brightness, I can't see a shadow.

  Thanks in advance, Michael

  Hello

  Have you noticed these shadows before the repair screen?
  I m not a Pro U200 owner and, therefore, I can not say much about this issue, but on my laptop, something similar appears if the brightness is set to lowest level.

  In any case, I recommend you to call the guy who repaired the display. Maybe they know more about this issue and could provide details.

• How to display the menu bar and address at the same level?

  Firefox 4 seems good, but a major problem is that the menu bar, the bar tabs and the Navigation has a bar a clean upper-left line in the window, with mainly two effects:

  1. Much space wasted on the top right
  2. The real web window being compressed very vertically, so if you have a laptop or widescreen for another reason, then it isn't really a lot of space on the left for navigation.

  The Compact Classic add-on does not solve this problem, but with the adverse bars becoming quite small and rather hard-to-reach buttons. A better solution would be to show the menu bar and the Navigation bar at the same level, but how?

  Default on Win7, Firefox 4.0 not same poster not the Menu bar - the orange Firefox button is displayed. Right-click on the Menu bar and click on the menu bar in this context menu to deselect. When you have the orange Firefox button projection and the menu bar is hidden, you can access the Menu bar by pressing the ALT key .

  Or, you can open the toolbar Customize mode and move items from Navigation bar in the Menu bar, and then hide the Navigation bar.
  
  https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar
  
  http://KB.mozillazine.org/Toolbar_customization

  In addition, there are a number of compact menu extensions that deal with compaction of the Menu bar down to a button that replaces the menu bar and provides a drop-down list of these menu items. Or extensions that allow you to Customize the Firefox button menu and add menu items that aren't there, but who are in the menu bar. Using most of these types of extensions involves using customize to move the items according to your tastes.

• How to disable, disable or reset the ink level warnings and messages

  I spent hours on the internet trying to figure out how to turn it off, disable or reset the ink level warnings and messages. The ink cartridges, I bought are not the expensive brands of HP, but generic print cartridges at a reasonable price. They work great, and I have no problem printing. But apparently HP went through a lot of trouble, making it difficult for customers to disable the annoying low ink level warnings that pester you every time that you try to print a page. It doesn't matter if the ink cartridges are completely full. It is obviously an attempt to punish consumers who buy anything other than HP products. I'm about to recant to never, EVER, buy another HP product again. I'm also about to post horrible comments on Amazon, Ebay, new egg and any other place I can think to warn potential clients of this heinous behavior of HP.

  Model: CN219A

  Serial number:[personal information deleted]

  Name: Series of HP Photosmart Plus B210e (network)

  Windows 7, the printer is on my wireless network.

  If anyone knows how to do this, let me know, before you take a hammer to my HP printer. Thank you

  Hi portaadonai,

  I want to help you with your ink pop up of disorders. Open this link by wade1027 on how to disable ink level notifications. You should be able to disable the pop out.

  Let me know if this helped.

  Thank you

• Can I display the battery level of the mouse on my desk at all times?

  I have an apple mouse and I want to check the battery level of mouse frequently without open the system preferences application. Can I permanently display the level on my desk somewhere?

  You may be able to view the status of the battery of a keyboard and a wireless Bluetooth mouse

  from the inside (or bound by) Bluetooth icon that can be made to appear in the Finder

  top right of the main window. The two items should be a little quicker to consult, through this path,

  that to go into System Preferences > keyboard, mouse, etc.

  Didn't see a third party application or widget that might show the remaining battery life

  in the computer or external BT wireless an iDevice. There may be a.

  A widget by name iStat Pro used to offer a way to see these items, but not in the last

  version and the company that makes the excellent original, no longer exists as such.

  Good luck & happy computing!

• C870-15R satellite - cannot change the brightness level

  Hello

  I have a problem with brightness. The screen is too bright, maximum power. I can't diminish with F2 or F3, even with the software solution...

  The other problem is, from Toshiba Web site provides more pilots. I can't find the reference in the site with automatic detection, even with the serial number.

  Could you please help me, use this computer with sunglasses is not an option...

  Thank you

  Can change you the brightness level using the options in the options of food directly?
  Check it please this option.

  If auto-detection doesn t work try to find all orders manually.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

• Satellite Pro has - can not control the brightness level

  I can't control the brightness level of the screen of my laptop! When I opened (Panel\Hardware and Sound\Power Options control) I can't find!

  Hello

  Usually, you can change the brightness of the display by using the FN + F6/F7 key combination.

  It works for you?