At the opening of the PSC 3.6.3 I wonder to authenicate a user name and password to go "fasTun. In my view, that it is a virus, which I can't find, or eradicate. This coincided with my computer located in Canberra, Australia, thinking about my ISP is in F
See the detail in the original question. Here is the text of the dialog box that appears, with the username and password fields: "the fastun.com:7000 proxy request a user name and password. The site says: "fasTun. "This means that I am unable to use the multiannual financial framework. I uninstalled PSC and PSC re-installed and the same thing happens. The problem arose after that I had been surfing the Net and goes on a German site. From that moment, my internet has become very slow. When I ran "speedtest.net" my computer would fairc Frankfurt (Germany), instead of Canberra, in Australia! Can you please help?
This has happened
Each time Firefox opened
Following my fact a system restore to a point before the computer slows down. From there on, I was unable to use the multiannual financial framework to connect to Web sites. The problem is not using Windows Internet Explorer 8, or is there a problem with the speed of downloads.
User Agent
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)
Check the proxy settings under Tools-> Options-> Advanced - tab network, the settings button.
You probably want no Proxy, if it is set to anything else.
See https://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Connection_Settings_Dialog
http://fasTun.com (a record required web Accelerator / anonymizer) indicates that it is a kind of add-on Firefox. Do you see a relevant in tools-> Modules-> Extensions? Try turning it off.
If you are not sure who this is, try to disable all questions to troubleshoot Firefox in Safe Mode .
Tags: Firefox
Similar Questions
-
'The specified network folder is currently mapped using a different user name and password'.
"The specified network folder is currently mapped using a.
another user name and password.
Connect using a different user name and password
First, disconnect any existing mappings to this network
share '.
I got this message when trying to access a laptop on my home network. It's a laptop which came for years. The only change that occurred was the removal of a few videos to Windows Media Player. In fact, I was sitting near the laptop (laptop 1) that stores the video & audio files that I share on my network for years and an additional (cell 2) laptop computer on my network. I was simply remove a playlist via WMP and I witnessed portable 2 lose access to files I had shared for years with my home network. I don't even use WMP, I had just open trying to access the laptop 1 video/audio files to my PS3 system. I was clear an old list of video of WMP so I could add the extra avi files to the list that I had collected over the years. I wanted to not double many videos so I removed the videos in WMP list. Since then, I'm not able to share anything of my laptop 1 to the rest of my network. I did not like WMP before, now I really despise WMP. When I try to share a folder, right click, share with & click on homegroup (read/write), the option is not selected. Any solution would be greatly appreciated. Thank youHello
The link below talking about a similar problem that should help you to solve the problem.
-
network/security problem
I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?
How you connect to the internet, dsl / comcast / wireless.
The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,
Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,
-
Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.
I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.
In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.
The message is bad because:
1. the specified network (action2 in my example) folder is not mapped at all, and
2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.
The error message is wrong in two respects.
This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials. It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.
David Walker
-
I try to install 14 items. After that I entered the serial number and the password that was given to me I can't move forward. What can I do?
Maybe it's your operating system asking your administrator password prove that you are authorized to perform the installation
-
I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.
OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?
If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.
-
Connect you to Skype does not work with the correct user name and password
I tried to login with my correct user name and password, but received the error: unable to connect to Skype.
So, I reset the password and can log on the Skype website.
Tried to connect to Skype and the same error: unable to connect to Skype.
I use
Mac OS X Version 10.9.5.
Skype 5.8.0.1027.
OK, I think I thought about it on my own. I had not used Skype for some time. I just DLed the latest version and here is my connection works fine. Hope this helps you.
-
Hello, I have a windows mail account on my laptop and I also have an iphone. I registered my account companys on both laptop and iphone problem is when you configure receive it and send messages on mobile then you can not send screws iphone.
If you set up the password for the e-mail account on your iphone, it will stop and request your username and password on your laptop.
How is it possible to use both systems without having to login with user name and password every time?
Hoslo
Both could be "collision" in that they are both trying to access the mail server at the same time. Make sure that they do not check too often. Try to disable a device when checking with each other and see if that makes a difference. Also with WinMail, if you have a POP3 account, make sure that under Tools | Accounts | Mail | Properties | Advanced that you have configured to leave a copy of messages on the server, so the phone can bring too, that normally it will delete messages on the server when it downloads.
Steve
-
Whenever I open my email account, I asks me to enter the user name and password and I see an 0x8000CC17 error message. Please can you offer any advice. Thank you
* original title - Hello, I am a user of Windows Vista and my email account is windows mail *.
Hi Petersanswers,
Thanks for posting your question in the Microsoft answers Forum. For information about Windows Live Mail, please visit the following link:
http://windowslivehelp.com/forums.aspx?ProductID=15
Thank you!
-
I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...
Hello Ashan,
Thanks for the reply.
You can try to follow the following suggestions to solve the problem.
First, try to reset Internet Explorer and see if that helps.
Reset Internet Explorer
http://support.Microsoft.com/kb/923737
Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.
Additional information:
We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.
(Also works for Windows 8)
Updated a hardware driver that is not working properly
To connect to the Internet
http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
Thank you
-
So I have a macbook pro - and she advised me that I had to update my Adobe flash player. So I go through all the steps and I'm stuck at the last stage, where he asks me my user name and password. I go in there correctly - several times and it does NOT connect. He shakes to show that there's an error. Double check my file AND I go to the Adobe site to connect with the same information. and it works very well.
WHAT IS THE PROBLEM? Help please.
Could you please try ComputerName administrator as username and the password as password.
I hope this works.
Concerning
Hervé Khare
-
How can I add a form with the user name and password
I would like to add a registration form with the user name and password. Are there any embedded html or widget for this
Hello
Here you will find a similar description:
https://forums.Adobe.com/message/6078030
https://forums.Adobe.com/message/6141887
Thank you
Sanjit
-
How to get emails hidden with the user names and passwords
Husband hiding accounts email and user name and passwords for online dating sites
Crisnray1994 said
Husband hiding accounts email and user name and passwords for online dating sites
Hello
We hope that you do well. I'm sorry, that would be a violation of the privacy policy of Mozilla that we work hard to maintain.
I would say to him talk about it perhaps?
Hope you will be able to get to the bottom of this somehow.
-Michael
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
XDB user name and password to access the page configuration EPG on a pluggable database APEX
Hello
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
Connected to the PDB, the registry says:
Name of the ID Version State
------------ ----------------------------------- ------------ ----------
APEX Oracle Application Express 5.0.0.00.31 VALID
I want to configure the EPG for this PDB.
I did the following (in this order):
(1) race: apex_epg_config.sql
(2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port
(3) race: change the anonymous user account unlock;
(4) run:
Start
() DBMS_NETWORK_ACL_ADMIN.append_host_ace
Home = > ' *',
As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)
principal_name = > "APEX_050000"
principal_type = > xs_acl.ptype_db));
end;
/
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
FLOWS_FILES EXPIRED & LOCKED
APEX_050000 EXPIRED & LOCKED
OPEN APEX_REST_PUBLIC_USER
OPEN ORDS_PUBLIC_USER
OPEN APEX_PUBLIC_USER
OPEN APEX_LISTENER
ORDPLUGINS EXPIRED & LOCKED
ORDDATA EXPIRED & LOCKED
ORDSYS EXPIRED & LOCKED
ANONYMOUS HAS EXPIRED
ORDS_METADATA EXPIRED & LOCKED
I used the documentation:
https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386
When I run from the browser:
http:// < IP address of the server >: 8080/apex
I get the messge:
"APEX request a user name and password XDB"
Does someone has encountered this situation in a PDB file?
Thanks in advance for any information.
Thanks and greetings
Hi Patrick,
Laury wrote:
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
I want to configure the EPG for this PDB.
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
ANONYMOUS HAS EXPIRED
The problem is the ANONYMOUS account has expired.
Reference: Re: XDB username and password
I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?
And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)
Kind regards
Kiran
Maybe you are looking for
-
How to upgrade the software Motocast on PC?
My backup phone is no longer on my PC because it indicates that I have to update my Motocast software. For the life of me, I can't understand how to do this. Help!
-
This combination is used to work through the USB port. I replaced the cartridges and since then I can't it will be printing again, USB or WiFi. I have updated the printer driver. The printer display full cartridges. Anyone able to help? See you soon
-
Windows forces 40 S/MIME encryption
I was to work with S/MIME interoperability (digital ID) and have encountered a problem. Apple Mail.app does not include the signed S/MIME capabilities attribute RFC3851 indicates they SHOULD include. This should be corrected, and I've done everything
-
I just had to reinstall my windows xp edition works with sp2 media center and I know that it is so more suport for this service pack, but I want to upgrade to sp3, but cannot do so if windows update and I don't know if the sp3 for this work which fil
-
How to insert an image in a post.
Have you ever wanted to insert an image in a post so that others can see a pictorial version of what you describe? You know what they say. A picture is worth a thousand words. Here are the steps to add a picture to a message: Get what you want to sh