Acer m52265 and kodak 7AIO printer. Print via USB. Wi fi sees the printer, cannot print at all, communication error.

Similar Questions

• OfficeJet 6500 E710n-z: where to locate X 86 Drivers for Win 7 to print Via USB system connected to the network using Win 8.1

  Since my computer can only connect to a printer wireless via USB, other computers on the network cannot connect to the printer.  The possibility of allowing other printers using the main system of sharing, I need the x 86 driver but cannot locate it on the HP support.

  Seems there are a lot of problems installing with HP systems, I would hope that society can give a high priority to these issues.  Many of us love quality HP but wireless connectivity is frustrating.

  In a humorous way, please remove the "cannot find the printer - make sure that the printer is plugged in and turned on."  statement.  Our children know how to set up a network, so that the statement is hilarious, until you see for the 20th time as possible motive to the wireless printer is not found on the network.

  Hello
  My post seemed to have grown to a case manager who was willing to put up a time for the members of technical support to contact me.  By the way, she asked about the distance, the printer from the router, which, by other reviewers, should be placed next to the printer, and she asked for me to try to move the router to about 18 inches from the printer so that it would be responsible for coordinating the call of support following our conversation.

  I did it and all network issues related to wireless access by the entire Office has been resolved and performing network and each station can print and scan in a few minutes, following a job application.  Printing took about 20 minutes to start and sweep was impossible until this Council been offered.

  Many congratulations to Yvonne!  And, I thank you for following up on this post.  I am a very satisfied customer again once my application has been met with personal concern for the issue and an appropriate resolution and FANTASTIC found!

  Thank you once again,

  Rick

• Using Windows 7 and 8.1 of Windows via a shared house group the WF-2540 Epson printer is off line.

  Original title: printer is offline

  using Windows 7 and 8.1 of Windows via a shared house group the WF-2540 Epson printer is off line.  This printer uses with two PCs using Windows 7 and a PC using Windows 8 with no problems.  Today it usually just printing using 1 PC with 7-1 8.  It is connected to the PC works well.  This isn't wired wireless we have wireless at the office.   Use this way for years with no problems, then suddenly this morning its all stopped.  I read so much information on it with no satisfactory response.  Epson will not know that it is not connected via radio or directly with a PC, so I'll through in circles.

  I reinstalled the PC on Windows 8 PC nothing works.  Any suggestions as to what I can try next as business has ground to stand without the printer!

  Thank you

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our TechNet Forums social as this question right here.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Sincerely,

  Ankit Rajput

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.

• What is up with Apple?  Why can I not hear my own music on the Apple's music? I refuse. To pay for the service until I get access once more to the music, I already paid for and put it on iTunes via my own paid for the CD. Apple thinks they have. Right to

  where is the music I paid?

  Where's your music?  Can how we know? If you have imported all your iTunes music, then it should always be in there under music-> my music. Why don't you think?

  You have synced your music on your iPad? Why do you think that you will pay for the Apple's music?

  If you haven't synced your music on your iPad via a USB cable and itunes, then the only way to listen to music is to the Apple music subscription service.

  The subscription service allows you to download all your music to iCloud, so it is accessible by other devices via wifi.

  If you do not want to do, them simply synchronize your music on your iPad via USB cable.

  Perhaps if you explain what happened, we can provide specific advice.

• How is used to find the mac address of my ipod and iPhone which is attached via USB windows 7

  Deployment of several hundred iPods and iPhones and need to conclude the names MAC and device Cisco ACS.

  Wondering how to find the MAC when the device is connected via USB to a Win 7 box so we can cut and paste the name of MAC and device in the Cisco app to avoid typos.  Thank you

  Hello

  Thank you for keeping us posted.

  I wish that post you your request here-

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Also try posting your query in the communities of Apple as well-

  https://discussions.Apple.com/index.jspa

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• I can't send via my email Cox-with the help of Live Mail - all cox parameters are correct-webmail works

  This is the error code I get - I receive and all the other works - just not sending features.

  It has worked very well all day yesterday - this am - a question. Someone has an idea?

  Thank you-

  Mike

  The message cannot be sent because its size exceeds the limit of the server. You can use the option in tools | Accounts | Properties | Advanced, to break messages into smaller parts.

  Subject ' Fw: type of page - Nutrition authority '
  Server error: 552
  Server response: 552 5.2.0 BWLi1p00j3HswdQ01WLjHV this message was delivered. This message has proved to be a potential spam message and so was blocked. Please visit http://ww2.cox.com/coxagainstspam for more information.
  Server: 'smtp.cox.net '.
  Windows Live Mail error ID: 0x800CCC6D
  Protocol: SMTP
  Port: 465
  Secure (SSL): Yes

  In live mail go to the Outbox, delete all mail shown here.

  Have you read the link provided in the error report?

  http://www.Cox.com/residential/support/Internet/article.Cox?articleid= {fd875f80-6446-11df-ccef-000000000000}

• When I try to print from Firefox, it prints just a blank page; I tried to reset and now nothing prints at all

  When I try to print using our printer Konica, Firefox, print blank pages. I tried to reset the printer, but now nothing prints when I choose the Konica printer.

  I tried to reset the two senses, none worked. Fortunately, I tried using Chrome, and that worked very well, so I'll just use this full time.

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• Windows 7 does not recognize my Canon EOS 10 d when I plug it via USB - can not find the driver.

  When I plug in my camera the computer emits a sound that acknowledged the event, but can not find the driver for my Canon EOS 10 d digital camera.

  Canon has a compatible driver Windows 7 for your EOS 10 d...

  http://software.Canon-Europe.com/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Acer 1641: Says it is printing but is not

  The problem I have is with a new HP 6600. I have the same problem with a relatively new HP 5600. I don't think that there is a problem with the printer. It prints a page of test very well. There's nothing wrong with my computer, either. I guess that all that remains is the communication between the two settings may be incorrect or.

  No matter what avenue impression I take, Gimp, Notepad, pictures, photos, Documents, etc., I get the same results. I click on print. A window appears showing the printer for HP Officejet 6600. I select print. A progress bar appears and indicates "print page 1 of 1. Immediately, disappears from the progress bar window. That's all that happens. I'm going to printers and find a green arrow by 6600 icon. It shows there is 1 document to print. It also says "error".

  I do not use the function of this printer wireless. It is connected to the computer via USB. Given that the computer recognizes the printer, I don't know what the cause of the problem.

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• Can I delete and reinstall 6500 a E710a via disk problems

  Im running win7 64 bit.  Error message "windows cannot communicate with this device."  I did an uninstall all instances of HP Revo but many still exist when I do a search for "HP".  I get a driver and see the ink levels but nothing else.  The installation disk won't let me go to the connection via usb dialog.

  I downloaded the latest driver and software.  The printer works, but I have lost a large part of the functionality (options of printing, desktop icons, ink level view, etc.)  I'll connect it via USB. I have the disc or I can install it from the HP site. My concern is of multiple appearances of the same files or other data.  Can I safely search for HP on the C drive with Win 7, and remove all the front of appearances of re - install?

• cannot print, I get an error saying does not support automation

  windows Vista i run whenever I go to print something I received an error notice saying not supported automation can someone help me please

  If you open WordPad [start all programs accessories WordPad, type a phrase and click on print, are all printers listed?] If so, is yor actuial printer it listed?

  Please report the exact words of any error message you get, and you're trying to print.

  In the meantime:

  1. Remove all the drivers for your printer installed printer.
  2. Download current drivers of htis web of the manufacturer of the printer.
  3. Install them according to the instructions.

  Tom Ferguson

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.