Similar Questions

• I have win 7 and I can't update win 10 due to the too small system partition. I have only 2.98 gb

  I have win 7 and could ' t update win 10 due to the too small system partition

  The above is a statement. Do you have a question?

• Snapshot before resizing the guest OS system partition, it will allow me to roll back if problems arise?

  I currently have an ESXi Server vsphere 4.0 with Windows 2003 Server comments on that operating system. And just to be clear, this virtual machine is a control area on the network.

  The problem I have is that the system partition (C drive on the guest operating system) is running out of room. I have plenty of room in the data store where the virtual machine, so I added 30 GB drive under disk space commissioning in additional virtual machine settings page. The configuration type is thick. So everything seems to work great so far, I see this space as unallocated within the guest OS.

  After some research, I found several tools that help me to inresizing the system partition to take advantage of the additional disk space. Specifically, I intend to use the dell (ExtPart) DiskExt utility to resize the partition in order to reduce downtime. Apparently, this tool works without restarting the Windows machine.

  My question is, if I make a snapshot before you try to resize the partition of guest operating system, this would allow me to go back and cancel any potential damage that resizing of disk can cause? I understand that I expected to be able to undo a change such as this with a snapshot, I just want to be 100% sure.

  And no, I'm not trying to use a snapshot as a substitute for a backup. I do a snapshot to reduce downtime in case of a problem.

  Any information on this would be highly appreciated.

  I guess I over thought the process a little too, so I tested.  Works like a charm.  extended to the HDD via the vSphere Client, created a snapshot, ran extpart extend drive C:, delete the snapshot.  VM, although not a controller domain and just a test VM, is functional and happy.

• I'm a little confused on the merger a system partition and recovery.

  Dear Sir, I deleted my recovery partition (D :). and then it merges with the C: partition, as my C: drive is running out of space done. Remove recovery partition affects operating system or computer or my drive hard. can reinstall the operating system creates a partition recovery any help.)

  On Wednesday, January 5, 2011 07:35:22 + 0000, chanderkant wrote:

  as I think that the partition which stores log, crash memory dump error files etc is the recovery partition. I'm wrong.

  Sorry, but no, it's not good. The recovery partition has been created by
  your computer manufacturer. It contains only an image of Windows in
  the State it was in when it left the factory. It is there for you
  to reinstall, should you need or want, and it never changes
  (unless you change - which you should never do).

  Ken Blake (MS-MVP)

• 1905 - S277: cannot restore the original default system

  I have a Toshiba laptop model 1905-S 277. Recently, I m having a problem reinstalling my system with reinstall the CD after I insert my first CD, he starts to run, and after a few moments, it displays a massage with two options: (1) install application and (2) the default original system restore drivers install if I choose the 2nd option then it shows that the system will restart now. Please leave the CD in the drive up to this requested to remove WARNING: to start from the CD, please hold down the C key during restart System. After that, the computer restart and shows a massage: D:\ conexec.exe, windows\system32\ autoexec.nt C:\.
  The file is not suitable to the running MS-DOS and MS windows application. Click on close to terminate the application. It also shows the radio button (1) Close (2) ignore, but I can t choose one of them as hang up the computer.

  Please let me know if you have the slightest idea what to do.

  Hello

  As far as I know, this unit was designed for the American market.
  I m not 100% sure how the recovery procedure works on the American units but normally you should see 2 options; Standard recovery procedure and expert recovery procedure.

  It should be necessary only to boot from the recovery cd and choose one of two options.
  Well, I put t really know why you laptop hangs. Perhaps the formatting of the HARD drive can help, but this is only a suggestion.

• How to determine if the XP operating system is genuine

  They gave me this computer, Dell Precision 340, which had been built in 2003. He moved with Windows XP Pro version 2002 registered 3 pack.

  I was on the site of Microsoft trying to download Security Essentials and the site told me that this operating system may not be authentic. I said that it is by those who have donated pc for me. I need to know if the product key changer is a good thing or not? I now can not afford to buy the new operating system for this, nor update the pc now...

  How to request backup discs Dell

• CPU use 100% for the NT kernel & system

  On the Task Manager CPU usage is 100% for the NT kernel & system so my PC is going very slowly
  AMD Athlon X 2 7750 2.7 Ghz
  2 Ghz of RAM

  Hello

  See following message if you suspect malware has a role to play.

  CTRL SHIFT ESC or right click on taskbar - task manager.

  Manager of task - performance tab - resource monitor - any info on what might be executed on the
  CPU box (click on the small neighborhood down right).

  What happens in Mode without fail - repeatedly, press F8 as you boot?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• is it possible to redown load from microsoft and use my original key to validate thnx paul t instead of the original operating system was 32 x 64 bit

  I loaded Windows 8, which was not working properly could not recover my windows 7 has requested a second reinstall windows 7 again, but it installs only 32 bits instead of the original operating system was 32 x 64 bit is possible to redown load from microsoft and use my original key to validate thnx paul

  Redownload or resume

  Method 1:

  When you buy Windows 8 an email with the download link and purchase details will be sent to your email address that you use to purchase / register your product, you can simply access email and use the download in link to the re - download to your computer.

  Method 2:

  Here are the links that will help you to download Windows 8.

  Note: Please refer to option 4 in the first link below and download the correct version of second link and use the product key of windows 8.

  http://Windows.Microsoft.com/en-GB/Windows-8/buy-Windows-8-online-FAQ

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Hope this will help you. Please do not hesitate to meet any other assistance and we will be more than happy to help you.

• Peripheral USB does not connect to the guest operating system

  Hello

  I installed VMware Server 2.0 on windows server 2K 3 Enterprise. I also installed a new guest OS win 2 k 3 standard.

  My question: during the attempt of USB connection in the comments, it does not connect. It shows the error like: "an error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host. "in the events.

  but the usb device works fine in the host operating system win 2 company 3 k. the log shows that:

  16:23:58.671 Jan 08: vmx | USB: Device connection 0 x 400000409306545

  16:24:43.578 Jan 08: vmx | VMXVmdbLoadUsbDevices: New series of 0 USB devices

  16:25:03.421 Jan 08: vmx | USBG: CONNREQ: corresponding request head after 123675 ms for the name: Toshiba\ DataTraveler\ 2.0 vid:0930 pid:6545 path: 1/4/4 speed: high family: storage

  16:25:03.421 Jan 08: vmx | Msg_Hint: msg.usb.win32.connectionError (sent)

  16:25:03.421 Jan 08: vmx | An error occurred while trying an operation connecting an USB device between the host and the guest. Please check the Device Manager of Windows for the current state of the USB devices attached to the host.--

  ---

  explored in the vmware communities but in vain.

  Roline

  See the entries related to USB in my computer FAQ - link is in my signature

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• I want to install windows os(not genuine) in the mac, I use mac air beginning 15, 4 GB of ram, 128ssd.     I want to play counter strike (overall offensive) in the windows operating system.     is 4 GB of ram enough or it takes 8 GB of ram.

  in fact, I want to install windows os (not authentic) because I'm fond of counter strike

  so, mac support this game?

  or it takes 8 GB ram to play counter strike?

  operating system windows (not authentic) will cause no effect on mac?

  If I install the windows on mac operating system, I will award 58 GB in the windows operating system and remains to mac, goes no problem in the future, due to the windows operating system?

  ALSO POINT OUT THE ADVANTAGES AND DISADVANTAGES OF INSTALLING WINDOWS ON A MAC.

  operating system Windows (not authentic)

  This means that you ask for assistance on the use of a pirate copy of Windows?

  If you install Windows, you have the advantage of being able to run Windows and the inconvenience of having to deal with all the viruses and stuff for which Windows systems are prone.

  Why not just buy the Mac version? It seems relatively inexpensive: http://store.steampowered.com/app/730/

• I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  I have macBook build 10K 549 and I want to upgrade to the new OS system available while one will work on my device

  It is impossible to tell from this information. Choose about this Mac from the Apple menu, click more information and search the model identifier.

  If it's MacBook1, 1, 10.6.8.

  If it is MacBook2, 1-MacBook4, 1, 10.7.5.

  If it's MacBook5, 1 or MacBook5, 2, 10.11.6.

  If it's MacBook6, 1 or greater, 10.12.

  (144865)

• My bank site refused my log in because of 'old' browser, but I don't want to upgrade the next operating system (Yosemite) because he ruined my computer before. How can I upgrade only from Safari?

  My bank site refused my log in because of 'old' browser, but I don't want to upgrade the next operating system (Yosemite) because he ruined my computer before. How can I upgrade only from Safari?

  Safari cannot be updated past 6.2.8 on Mountain Lion. If you want to, switch browsers.

  (144681)

• How can I download and install the latest version of Safari without having to install the current operating system?

  I just bought a MBP of 2013 (MacBookPro) renovated with OSX 10.9 (Mavericks) and want to update my Safari (version 7.0.5) the latest version of Safari. I tried to download Safari from Apple's site, but he said that I would also install the current OSX (10.11 El Capitan) as well. I want my MBP to stay on OSX 10.9 (because it is the last operating system that supports Adobe Creative Suite CS6).

  Can someone advise me on where I can download ONLY the last Safari?

  Thank you

  Steve

  You cannot run the last Safari on Mac OS 10.9.

  It requires the latest Mac OS (10.11)

  You can create a new partition and install the latest OS above and use it.

  Then the Mavericks partition boot when you want to use Adobe Creative Suite.

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.

• What is the audit file system 8 exit code?

  Disk utility > first aid

  What is the audit file system 8 exit code?

  Thank you.

  Disk utility local SSD and the disagree recovery Partition

  IR.1819660 / http://forums.macrumors.com/threads/File-System-Check-Exit-code-8-Disk-wont-repa