Attach it to the Center Troubleshooting Utility

Similar Questions

• Problems with the windows troubleshooting utility. Error code: 0 x 80070002

  Original title:

  Problems with the windows troubleshooting tool

  Whenever I run the Troubleshooting Guide for things like a problem of wireless network I get this error

  An error occurred during troubleshooting:
  An unexpected error has occurred. The Troubleshooting Wizard can not continue.
  Identifier of the package: PeformanceDiagnostic
  Path: No Local package
  Error code: 0 x 80070002
  Source: engine
  User: SCOTTSLAPTOP\Scott
  Background: high

  Hello

  1. the problem occurs with all the troubleshooters you trying to run?
  2. why you try to run the troubleshooter?

  3. Since when are you facing this problem?

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an inplace upgrade.

  You can try to do an inplace upgrade and check if this gives a probable solution.
  Check the following link to see how to perform an inplace upgrade.
  http://support.Microsoft.com/kb/2255099

  I hope this helps.

• F380: I can't "to open the application center troubleshooting hp Windows 10

  I can't "to open the application center troubleshooting hp. I've uninstalled and reinstalled the drivers complete and up-to-date for Windows 10 but without success. If I click on the icon on the computer beeps and nothing happens. How can I do? Thank you!

  Hello

  It seems to happen because of the KB3132372 affecting Adobe Flash Player and therefore affect the HP Solution Center that relies on Flash.

  BLAH, the Control Panel, select uninstall a program, click on view installed updates and delete KB3132372.

  Reboot your PC and try to open the HP Solution Center.

  Please let me know the results,

  Shlomi

• Message, given already in use required by the center of HP

  -When I connect my computer, a message appears on the screen saying, DATA ALREADY in SERVICE, the reguird of data by the center of hp is still committed by user OWNER on your us67pl6Luv then asks me if I want to finish the session or output. I don't understand what that means. It just started doing this today and each time as I get on my computer.

  Original title: data in use

  Hi tori71,

  ·         Did you do changes on the computer before the show?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• 15 "MacBook Pro early 2011 screen and use failure, horizontal lines, edges off the coast of the center of the screen

  Hi there-

  recently worked when all of a sudden my screen turned to a variety of 'snow '. After about 2 seconds, he stopped, but the screen was seriously messed up. Horizontal lines apart a few millimeters, but the lines look as if they were moving a little. In addition, the edge of the screen is now near the Center, rather than on the edge of the physical screen. So, there is a black bar halfway in the screen which cut into 2.

  It froze the computer as well, if I pressed the power to restart. It loaded very well through the screen of apple, but as soon as he hit the login screen, he returned to no usable lines. Cannot get back in.

  Anyone that prior experience, or know what I can do to get out of trouble? Looks different from most other 'horizontal' issues I found in searching.

  Photo attached.

  Thanks and best,

  Curt

  

  

  See MacBook Pro 2011 for graphics problems repair Extension program.

• Since its installation in Firefox 20.0.1. There is a box in the center of my screen titled progress install with a bar running below the Green progression.

  Please help this driving me Mad
  Since the installation of Firefox 20.0.1. on my MS Windows 7 Toshiba Laptop there was a box in the center of my screen titled "progress install < with a bar running below green growth."
  Firefox 20.0.1 (FF) works very well and I can drag the box of progress on my screen to my heart's content. Although there no small cross at the top right I can get rid of him by my mouse over the icon (ff), pinned to taskbar program in hover. This gives me a box of progress of installation with small cross, click and his party. That is until I got close and restart (ff) and back it comes in the middle of the screen. I tried to get rid of it through CTRL-ALT-DEL Task Manager, but even once, it reappears on start up (FF) I also stripped (ff) of my machine, once using widows uninstall/change of MS program features and for the second time by using third-party software as soon as I reinstall (ff) new same old problem.
  Thank you
  Cordially Fenfolly

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to bring back the feature Fall alphabetical down from my previous research in the center of the Mozilla Firefox Start Page Google search box?

  In the afternoon of August 24, I lost a feature on my Start Page of Mozilla Firefox and I can't understand how to get it back. It is the Google search box in the middle of the page. Previously, when I want to do a search, for example Amazon, I must type the letter 'A', and because I had typed "Amazon" in this area of research before, a drop down menu alphabetical would come with "Amazon" in it. I could then click on this word without having to type the rest of it. This option no longer works.

  I did an update of Adobe Reader that Friday morning, so I thought that maybe why it happened. I did a system restore, and brings the system back to Tuesday, August 21. That did not help.

  I ran CCleaner and cleaned the registry also. Oddly enough, I found that just after that I have this and then open a Mozilla Firefox Start Page, the alphabetical drop-down list feature is back in the center of the search for once, bar a single search. After that he went again. I'm going in and do just CCleaner (no cleaning required registry) and the same thing happens... the functionality is there for a search only.

  I went and made sure all my Add-ons/Plug-ins are up-to-date. I also ran a full scan of the system, but no problem came.

  I am computer illiterate, so please bear with me. I don't know if the things that I tried would have helped or not.

  I have Windows 7 and Firefox 15.0.1

  I appreciate any help you can provide.

  It worked! I went in "Troubleshooting information" and click on "Reset Firefox" that solved the problem. Thank you very much.

• On the "Image Enhancement Utility" software for the Qosmio series

  Hey all,.
  As you may know, the utility of photo development is responsible to define the image quality in 3 software: Windows Media Center, WinDVD & WinDVR.

  It gives more bright colors, a picture more clear and other improvements in the display mode full screen.

  I was wondering if it is possible to have the image Enhancement Utility affect the image quality of other software such as Windows Media Player, Zoom Player, Media Player Classic or other players.

  When I got my Qosmio, I didn't expect the Qosmio announced engine (which is controlled by the image Enhancement Utility) to be only compatible with the 3 predefined software!

  I think it would be great if Toshiba could specify the software for which we want strengthening of motor Qosmio image, as an option in the "Picture Enhancement Utility.

  I really hope that Toshiba will hear the appeal in the wild. ;)
  Next time!

  Alcahest

  Hello

  As far as I know this utility allows you to change the image quality depending on your viewing environment and also allows you to select external input parameters for video camera, games consoles etc. That s right it works with Media Center, InterVideo WinDVD and InterVideo WinDVR because these programs are pre-installed on the device. In my opinion, the development of photo utility is a very nice utility and as far as I know inimitable.
  You cannot expect that this utility must works with all kinds of programs, but maybe the next version has a few extensions ;)

  Best regards

• ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

  We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

  I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

  At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

  When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

  It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

  C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
  
  < BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
  
  < SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SUCCESS msg = "Successfully set BIOS config." / >
  
  < information msg = 'BCU return the value' real '0' = translated = '0' / >
  
  < / BIOSCONFIG >
  
  C:\ >

  And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

  I have tried everything I can think of to get this to activate, including:

  • Different versions of the BIOS configuration utility
  
  
  • Remove the password from the BIOS and the application in the same order as the parameters
  
  
  • Different passwords
  
  
  • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

  I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

  I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

  Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

  P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

  This problem has now been resolved by HP.
  
  They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

• determine the Center and the radius of the circles

  I want to determine the Center and the radius of the circles in the attached photo.

  I tried to use "IMAQ Fit circle 2", but I didn't know how to use the vi.

  Is there anyone can give me an example how to use "IMAQ Fit circle 2" for the image as an attachment?

  Or tell me any other method to determine the Center and the RADIUS.

  This example not found?

  

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My desktop image has another image in the Center, I can't delete, XP Home Edition

  Image of the desktop has a different image in the Center, I can't delete, XP Home Edition

  Hello

  1 have had modifications made to your computer before the problem occurred?

  2 are you facing this problem that when you set a particular background or with any other images?

  3 is the image pre-installed Windows XP, or you have downloaded the image of a place?

  4. what happens when you try to change the desktop wallpaper. you get the error message?

  I suggest to follow the article below troubleshooting steps and check to see if that fixes the problem on your computer.

  To change your wallpaper

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_desktop_background.mspx?mfr=true

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• Lately my Windows Live Mail is no longer allow me to attach files to the message.

  Windows live Mail

  Lately my Windows Live Mail is no longer allow me to attach files to the message.

  When I try, I get the following error window:
  "The file picker was suddenly closed by Windows" and this happens everytime I try to join.
  Send and receive e-mail works great.
  I also tried to run the command file check:
  c:\sfc/scannow
  invites me to insert the Windows XP Pro SP3 CD disc.
  Since this is a computer that is about 41/2 years I have
  original OEM Windows XP Pro disk, even if I've upgraded to SP3 via MS download
  How this rpoblem of e-mail can be fixed?
  I really need help with this question
  Thank you

  Hi Tell214,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• 'the disk check utility requires exclusive access to Windows__files on disk' (my hard drive). "Re-start of Windows. __

  FAILED: attempt recovery of bad sectors (disk hard C)

  I followed the instructions to increase the speed of the PC on the home screen of the box to highlight the function of microsoft.com.

  I could access the program successfully on my home screen (Windows XP Edition family version 5.1 service pack 3.0).  Phase 1 of the scan completed successfully, but about 70% through the phase 2, the analysis stopped and I got this message: "the disk check utility requires exclusive access to some Windows files on the disk.  These are accessible only by re-starting Windows. "   I was in charge of restarting my computer and repeat the test.  I did this, but got the same message several times in a row.

  I use the MS Update center regularly, my Windows XP software has been certified 3 times as being Windows genuine, and I update MS Security Essentials at least every 2 days.  I DON'T KNOW WHAT ELSE TO TRY!  As a general rule, ALL my other Windows functions work correctly & completely of my home screen.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Please contact me at * address email is removed from the privacy * with specific instructions.  I'll try the center of update every day, where you will find all items that can be downloaded to fix this thank you for your continued support.  Joy Knobloch

  UPDATE WE CHECK DISK: 2 responses of PML & TWELCH were marked as possible answers.  After you schedule a check disk and shut down your computer, you must WAIT an hour or two before starting.  There is perhaps a long line of users waiting to get their audited records!  I finally managed to get the disk to run check (I also checked the box that says automatically correct errors).  BUT I NEVER GOT A CONFIRMATION MESSAGE THAT DIRECTLY STATED THAT ANY "BAD SECTORS" HAD BEEN RE-COVERED.

  LAST QUESTION: Can we assume that if the disk check ran completely and automatically corrected "problems", that the "DEFECTIVE SECTORS" have been found?

  Thanks to everyone who participated in this forum.  E-mail address is removed from the privacy *.

  It is not clear what you were / are doing.  Try this:

  Start > run > chkdsk /f > OK

  A box appears with the following message:

  The type of the file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by
  process.  You want to schedule this volume t
  check the next time the system restarts? (Y/N)

  Type Y and press ENTER.  Then, restart the computer.

  If, during the process that follows, you still receive the message "FAILED: attempt recovery of bad sectors (disk hard C)" or something similar, go to the website of the manufacturer of your drive hard drive and download the appropriate for your hard drive diagnostic tool.

  I also welcome Microsoft to have remote access to my computer, so that they can analyze & fix problems as well hardware & software automatically or from the center of MS Fix - IT.

  Unless you allowed to access remotely in accordance with a phone call to the support of MicrosoftTHAT YOU HAVE MOMENTUM, you must disable the remote access and Remote Desktop (right click on post work, select Properties, click on the 'Remote' tab).  In fact, you must disable these features now and only reactivate if still initiate you a phone call to technical support Microsoft and will need to enable them.

• How do I tell the printer to the Center page?

  Prints from the center of the page to the right and omits the rest.  How to load printer to Center on the portrait page?

  Hello

  What is the brand and model of your printer?

  Download and run the fixit tool from the link below and check if it makes a difference.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  
  For your reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options