Attach it to the tool
I tried to update KB971644 for my windows vista system. And that's what I get. Please go slow.
1. | 1 What is included in Windows Vista Service Pack 2 (SP2) |
2. | 2 Windows Update Error 8000FFFF |
3. | 3 problems with installing updates |
4. | 4 Windows Update 80070103 error code |
5. | 5 Windows Update error 80072efd |
6. | 6 Windows Update error 80246005 |
7. | 7 Windows Update, error 8024402C |
8. | 8 Windows Update error 80072f8f |
9. | Windows Update error 80072ee2 9 |
10. | 10 Windows Update error 80070003 |
11. | 11 Windows Update error 80073712 |
12. | 12 Windows Update error 80070643 |
13. | 13 Windows Update error 80246008 |
14. | 14 Windows Update Error 80070002 |
15. | 15 Windows Update error 80070422, 80244019, or 8DDD0018 |
16. | 16 Windows Update error 800f020b |
17. | 17 Windows Update error 8024001F |
18. | 18 Windows Update error 80200010 |
19. | error 19 code Windows Update 80246007 |
20. | Windows Update, Error 8007000 b 20 |
21. | Windows Update error 800f0826 21 |
22. | 22 keeping computers on a network up to date |
23. | 23 error code Windows Update 8024001 |
24. | Windows Update 24 2 error code |
25. | Code error Windows Update 25 80070646 or 646 |
26. | 26 Windows Update error 80244022 |
27. | Windows Update 27 80246002 error code |
28. | Windows Update error 800f0828 28 |
KB971644 http://support.microsoft.com/kb/971644
Try this fixit: http://support.microsoft.com/kb/971058
Then restart (maybe twice) like reboot Vista.
If necessary, do a clean boot and try the update.
http://support.Microsoft.com/kb/929135
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
You can try also to rename C:\Windows\SoftwareDistribution directory tracking temporary Windows Update as follows:
1. start an administrative command prompt.
2. run the following commands pressing on enter after each line:
Net stop wuauserv
CD %SystemRoot%\System32
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
3. try to reinstall updates
Important the following symptoms occur when you perform this operation:
Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
When you remove the Software Distribution folder, your download history is deleted.
If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.
Note: If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old directory to recover disk space.
Once more, note it is important that you restart (even two) to make sure that everything is re-created correctly.
Tags: Windows
Similar Questions
-
Attach it to the tool and the gadget
I downloaded "Fix it" for Microsoft since I wanted disable my sidebar on Windows 7 Home Premium agdgets I. After the computer restarts, the sidebar is still there and I can always add gadgets on my desk. What can I do about it?
Thank you
Hi Cosmin,
Thanks for posting your query in Microsoft Community.
- Are you referring to uninstall gadgets when you say, "wanted to turn off my sidebar agdgets '?
If so:
Right click on the desktop and then click Gadgets.
Right-click on a gadget and then click Uninstall.
Note: If you uninstalled gadgets that come with Windows, you can restore them to the Gadget Gallery of office:
Click Startand then click Control Panel. In the search box, type Restore the Gadgets, and then click Restore gadgets installed with Windows Office.
To add a gadget to the desktop
Right click on the desktop and then click Gadgets.
Double-click a gadget to add it to the desktop.
To delete a desktop gadgetRight-click the gadget that you want to remove, and then click Close gadget.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Strange behavior of startup and cannot access the tools->; options menu
Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI. If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI. Furthermore, I can't open the tools-> option menu from a façade of VI.
I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!
I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior
Help - please!
Hi AMHurrel,
This seems quite strange.
Have you changed anything on your installation?
When you say you did a complete removal and reinstall, how?
Here are the steps I follow:
The following procedure removes the software Instrument National:
1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
NOR-DAQ, then last LabVIEW.3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.5. remove the following components of the registry in the Windows registry:
HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
keys with 1093 in them.
Don't worry if one of these trees are not listed. Continue with the rest of the process.Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
Publisher of the registry (regedit).6. close regedit.
7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
"C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.
8. save the attached file msiBlast.zip to your desktop.
(a) extract the msiBlast.exe file from zip archive.
(b) double click the downloaded msiBlast.exe file to run the executable.
(c) choose the selection show only installers of NOR.(d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
(e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.(f) Optional:
The repair option will open the installer of National instruments and run the option fix in the installer.Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.
9. restart your computer.
10. you should be ready to install your software. For the cleanest possible installation, first install all of your
software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
must be installed before the pilot. Download the latest versions of the drivers that support your hardware
She draws from our drivers and software updates (link below) and install them one by one, reset after each
install.11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.
NEITHER drivers link:- http://www.ni.com/softlib.nsf
* Attached is msiBlast.
You get an error message?
Let me know what you think,
Kind regards
-
Launch of actor in the Tools menu
I wrote a configuration tool (lets call him he asked ABC for simplicity) in the context of the actor for a very large API. ABC has been designed/intended to be launched from the Tools Menu in LabVIEW. For development, I ran ABC request directly using a development style 'splash screen' that I would run the project who owned the source code. Start of my development has a gross pop-up that you select the VI you want ABC asked to act as he launched since. As part of the final phase of development, I wrote a VI using the properties App.MenuLaunchApp and AppMenuLaunchVI to extract the VI to configure.
Here's where the trouble started. ABC application works well and close as expected with any kind of strange when closing when behavior executed using the development start screen. At the launch of the Tools menu application ABC is normally and allows me to run all the methods/GSM for actors without any hint of disorder. Closing application LabVIEW ABC crashes whenever the launch originated in the Tools Menu. It is very consistent.
I think from then on, it is that it has something to with the framework of the actor running in a private application context (LV dialog box). I'm assuming that LV dialog box makes the assumptions that I'm breaking.
I have not tried a simplfied example again; but I would like to know if anyone else has tried something like that... Is the creator of Message AF in the actor?
LV2012SP1
My client does not let me share the code.
I have attached debug output in case anyone's interested.
I was able to work around this error...
First of all, I made a simple example and found that I couldn't reproduce the problem (no surprise). I then started to accumulate the example simple until I realized that I had to have the actor opens his own referance to parent VI (the VI it is menu of the tool has been used) and do not use a referance opened by the start screen. Even if the referance with the VI parent ref was valid for the actor to use when running it would break LabVIEW at closing. I added the name of VI and the name of application service for data of the class of the actor and then used pre-launch init to invoke a method that would open up the VI of parent ref. I should also not that enquing the method of ref VI open parent since the start screen always generates a LabVIEW crash at the close of the actor.
Fun stuff...
If someone wants the chip as to why this happens, I would be happy to learn more.
-
Windows mail attachment problem-don't see attachment sign on the preview pane
In my windows mail, I see attachment sign on the preview pane, so whenever I have need to double click that mail and open the attachment. Pls Guide.
It is a known problem if you installed IE9. There is no solution. You can either uninstall IE9, or you can continue to open the mail in a separate window to save attachments. Moreover, with IE9 installed, the default font specified under Tools | Options | Read is no longer accepted and if you want to change the default font, you must change it in IE via Tools | Options | Fonts and then set the font here.
Steve
-
How to clear sticky-selection layer with the tool around in Photoshop CC?
In Photoshop CC, you can click and drag the tool move to select more than one layer. But sticky selection seems to be a novelty.
In the attached screenshot, you can see that I have selected several layers of a graphic illustration. Marquee of the move (not to be confused with the pixel-selection) tool is liked to touch these layers, but they remain selected. Suppose that I have selected some of these layers accidentally: when I move the marquee away unwanted layers, I want than Photoshop to deselect them. I don't want to restart a selection each time that my wrist shaking during the selection process.
I realize that there are several ways to select layers. I'm not looking for alternative solutions. No sticky home or go.
I am under Photoshop CC (2015.0.0 version) on OSX 10.11.5.
It is in the upper left corner of your screen capture: Uncheck self-select layers.
-
Lack of tools the tool pallet_Mac v 3D.?
I've been using the 3D tools last week and all of a sudden I open Photoshop CS 6 and lack them. See image as an attachment to screen palette on CS6 and capture tool.
Please advise,
Mac os x 8.2
PS CS6
Thank you
Hello
The only 3D tools that appear in the tools for Ps CS6 report of the pipette. The 3D tools, we can think of CS5, were moved and consolidated in the options bar when the move tool is selected.
Kind regards
Steve
-
I have a movie I created with 26 chapters in there. I want to export all the individual chapters as separate movies. I know it's possible by making each chapter using the tool of the range and export everything that is selected. But, I'm looking to win time by selecting all the chapters may export both. Is this possible?
Thanks for any help you can give me.
NO you must do them sequentially, even if you don't have to wait for it to finish before you can start the next. Stack them just to export in a sequential manner.
-
I want to import Windows Live 2011 messages, contacts, etc and tried to install the recommended add on. I downloaded and registered the add on by following the instructions, but when I went on the Tools menu, to add on the of are not there to complete the installation.
Add what ons reports tools when you use the menu bar. Shortcuts universal to display hidden menu bars is alt or F10
It looks like you use the button AppMenu (3 horizontal lines).
I guess that you haven't noticed the Add-ons selection in the main menu when you have clicked on that. -
Where can I get a map of lightning for my Apple pencil reload the tool?
Where can I get a map of lightning for my Apple pencil reload the tool?
It is packed with the pencil of Apple.
If you lose it, there is currently no way to buy a replacement because they are not sold on their own. You must contact the Apple Support and inquire about a replacement or load the pencil by plugging in the port of lightning of the iPad.
Use the pencil to Apple with iPad Pro - Apple Support
You can also purchase third party for pencil Chargers:
-
Maybe there's another tool button somewhere, but the only one I can find is when I write a new message. I have 4 options under the tool button; mail and newsgroups, address book, account settings and options. No where in these 4 find 'open module. I downloaded an add-on of highlighter recommended for Mozilla's Thunderbird, (highlighter by André Rodier 0.6.5) but I can't understand not just how to get it in Thunderbird! Thanks for your help.
You challenge do not use the Menu bar in a window of writing.
You must learn the shortcut of Windows to show hidden menu bars.
Alt or F10 displays hidden menu bars.In the Bar Menu of MAIN WINDOW, select Tools-Add-ons
Click the gear icon and select install module fileThe other option is to use the AppMenu. It's 3 horizontal lines. There is a choice of add-on in this menu.
-
Lack of Options and account and settings under the Tools tab in the toll bar
I installed Thunderbird 38.3.0 in Linux mint 17.2, but for some reason any, I miss the Options tab of the tool in the menu of the toolbar and account settings. I uninstalled and reinstalled the Thunderbird and Firefox so deleted my profile and Add-ons. Note I don't have Mint module search Enhancer and stylish disabled both in Firefox and Message Menu disabled in Thunderbird this that I can't remove.
When I reinstalled Firefox and Thunderbird, the Options tab of the tool in the toolbar and account settings menu are still reported missing. Can so someone help me to restore these features of toolbar?
Best regards
Oobals,
Look under Edit. Preferences and account settings.
_Linux, http://KB.mozillazine.org/Menu_differences_in_Windows, _and_Mac
You can right click on an account and choose settings, or you can click on an account, see its Central account summary page and select its parameters there too.
And most are under the Menu button of the Application; one that looks like a hamburger.
To restore the toolbars and menus, < alt > missing + v, toolbars and tick the boxes. You must repeat this in each window, depending on the case: address book, Write and reading window message, if you use it.
-
Cannot start addon because there is no longer the 'Tools' menu
I can't launch addon because there is no longer the 'Tools' menu. Is there a solution?
Press Alt and the menu bar will appear temporarily. Then click on tools.
Or open customize and use show/hide toolbars, and then click menu bar to show all the time.
-
WTF? Where are the settings?
All help articles are based on the use of the Bar Menu and not the new button AppMenu.
Press the alt or F10 key to display the menu bar and use the tools there. Some programmer thought it would be cute to make a difference under the AppMenu button. -
How can I find the tools of Firefox button?
I look for the 'TOOLS' button, I get nothing that tells me where to find
Hi, you can temporarily reveal the toolbar of the main menu by pressing ALT. If you want to stay there all the time - right click at the top of the page (not on a tab) and tick/check menu bar. Hope that helps.
Maybe you are looking for
-
transfer data from 2010 macbook pro to mac mini
How does a transfer of data from a 2010 MacBook Pro to a new Mac mini? Can we still connect the MacBook Pro as a hard drive and transfer data over all to the top of the Mac Mini?
-
my new mac pro keeps freezing and is really slow because of that colourful circle of spinning!
two days after the publication by purchasing my mac this circle spinning, bought to where I bought and I was told it was question of wifi but have had it checked that my wifi is perfect. bought to apple shop and they put something to clean my mac as
-
Latest version of the firmware for late 2012 Mac Mini Server?
I'm having some trouble with black screen on a Mac Mini from 2012. I want to make sure that the firmware is the latest version. I'm assuming that all relevant updates will appear in the App Store update section? That's what my mini is currently showi
-
Preserve class Runtime - why?
LV2013. This code works, but I'm trying to understand why I need the operation of preserve. If I don't get that, I get a compile error in the ShiftReg on the right: "One or more of the entries to this terminal registry or shift comes dynamic no front
-
Protection antivirus by Microsoft will not stay
Original title: Virus protection can't get my anti-virus by microsoft to stay on. any suggestions?