Attempt to use the data merge in the Slug, unable to complete the merge
I try to create a very large document (50 + Pages) to print the information that I need the slug, fired from a CSV file.
When I do, I get an error message "cannot create a merged document because no placeholders are present. If please add items in the Panel data for the pages of document merge and try again. »
I have to back up the text field to the chart/printspace Board of the document, and then manually move after the merger for each individual page. This is a HUGE drawback.
Does anyone have any suggestions or comments?
Thank you!
When you set up your text box in the slug area, set the text box to align to the bottom. Then pull the upper part of the box upward just enough so it's barely on the bottom edge of the page. That's all what it takes for the fusion of data examine the spaces reserved to appear on the page.
Tags: InDesign
Similar Questions
-
Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD? There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.
Thank you
Hello
I suggest you to visit these links and check if it helps:
How to install and use the Recovery Console in Windows XP:
http://support.Microsoft.com/kb/307654Description of the Windows XP Recovery Console for advanced users:
http://support.Microsoft.com/kb/314058How to perform an upgrade on the spot (reinstallation) of Windows XP:
http://support.Microsoft.com/kb/978788Check if that helps.
-
I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks
Hello syncere99,
1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?
The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Mozilla will not let me connect to my own account. Cannot prevent all websites that they are more up-to-date. I see this as a problem of Mozilla.
Just downloaded Ten Windows and it seemed OK with Firefox and Thunderbird until this problem. Mozilla - call me NOW
+++ +++ ++++If you do not call I give up Firefox and go with Explorer...
Edit: removed phone # public and robots to spammers. Sorry, but someone here or Mozilla does a on the support of a phone.
Hi greyfox73plus, the error page usually shows a code in parentheses (separated_with_underscore_characters). Sometimes, you need to develop a technical Details section to find the code. Could you put one you get?
Here is an example:
The most common reason for many sites (sec_error_bad_signature) seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox.
To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:
- Open the Avast dashboard on an affected system.
- Select settings in the left side menu.
- Adopt a Protection Active.
- Click on customize next to the Web Shield.
- Uncheck the option "Enable HTTPS analysis", and then click ok
If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.
-
Stop coming google results after attempts to use the URL bar!
I just installed the latest firefox and am angry. I used to be able to grasp things in the URL bar and firefox would direct me to the relevant Web site, no questions asked. I could type, for example, 'BBC world news' in the URL bar, and after knocking entered, I would be on the site of BBC News world. Now, "bbc world news" by typing in the URL bar gives me some GOOGLE RESULTS! Why? I search Google. What I liked about Firefox, it's that he could send you to the websites you wanted to go and all you have to type keywords... I can't go to a page of search results for NO REASON. How to do this job properly, as formerly?
'No useful response', note.
When you went directly to a web site, which was also a Google search, there are three different searches Google listed in the article, and each is described, choose the one you want, I think that all three of them or something similar with labels of Firefox has been used by Firefox.
-
I was Mozilla Firefox under Internet Explore months ago. Very happy with the maintenance functions, etc. A few weeks ago, I received a message from update while doing some work but have not installed the update at that time. Another update message came with a note of support, confused indicating some dangerous consequences if I have not installed the update.
A few keystrokes later and my screen seem to go haywire, and my laptop does not respond to my cursor. I stopped. When I restarted and went to the shortcut of Firefox a tiny icon (1 "x 1/4") replica of a part of the normal screen of Yahoo! Firefox appeared and continues to do so whenever I try to use Firefox. I am now to Internet Explore. HELP me to go back to the use of Mozilla.Right-click on the image of Firefox in this small window of Firefox and see if there are in this menu popup enlarge . If so, click on enlarge.
To be clear, Yahoo! Firefox is a modified version of the official Firefox program and may have defects that are not in the official version.
-
Cannot be reset after failed attempt to use the "Advanced Security" PLK300!
Help! I had my PLK300 (PLS300 and PLE300) work great out of the box in two different rooms, and then I tried to set up advanced security. Nothing works now, and reset buttons don't me back to where I started either. I had trouble with this for a week now and actually bought another game which has also worked out of the box. I am not advanced security trying and I'm willing to live without it. But stupidly I called linksys support and tried to get the other units working again - the level of communication was very poor and they wanted to have me apply advanced security to my new work as well as the original units units. Result: None of them works now, including the new ones who have been working well (again, without security adv) until I followed the instructions of tech support and they no longer work. When I explained to the technical support that now the new did not work the guy becomes evasive and denounced static on my phone line and a quick exit after giving me a case number. Really useless support system, I must say.
ALL I WANT is in any case, to know how to return to their origin and not secure units, but the operating state! Delivery to zero second 3 does not work, and I tried 5, 10, 30 seconds on the reset button as well. Anyone have any ideas?
-Dave
Thank you all for your very helpful comments. I was able to reset PLE300 and default PLK300 units by following the quick guide posted news AND "power stabbing" the reset button - it took a pretty hard press for 4 seconds approximately until the symbol powerline blinked quickly, and then everything was good! I'm now 6 units in my house (without the "" advanced security, so far) and they all work very well! I think it would be useful training for technicians on long distances to play with this problem and see really the required timing for various presses the button is very variable, especially for the reset button!
Thank you very much
David
-
So last night; surfing on the internet, the computer decided to randomly restart on me.
When it starts up; I get a BSOD code 0 x 24.
After that, he had a different error code. 0 x 50When trying to startup repair, I get the error codes.
It might have to do with the filesystem.
Can someone help me out here?
Oh, and Safe Mode does not work as well.(and if anyone can give a solution which is not formatting the hard drive? I have games I want to spend by downloading and playing over there where I left)
Have you tried to boot from the DVD win 7? I suspect you'll have to do a stable repair to it even when
-
My lite - on dvdrw lh-20a1l ata device does not work. Device Manager appears with the following text:
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?
19 code means there is a driver conflict such as two devices attempt to use the same
resources.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean the
power and data of the contacts with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Cannot use the configuration information of the States DVD burner are incomplete or damaged
I have an external PIONEER DVRW DVR X 162 DVD WRITER, and I can't use 0depenses with dvd software.the warning in the DEVICES MANAGER says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)What should I do now?Thanks, MikeHello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
Test server tries to use the old IDs after reboot etc.
I have just formatted my drive and installed fresh xampp, pulled my web files on the net and got the testing running server. I can access the pages that use my vidiscript DB, but for some reason when I try to access pages that use the same PB it gives me an error of:
Access denied for user 'deafboyz_admin'@'localhost' (using password: YES)
deafboyz_admin is the OLD username for DB, that my remote DB uses, which is painfully different than the testing server. I updated the DB file and saved and made sure it's correct on the test server. Restart xampp and even my computer, deleted history of cookies etc and still get this same error. It makes me crazy b/c my main homepage must use the db file for data and it works perfectly, but video pages it attempts to use the old credentials, which are not loaded in my test server.
as a solution, I even added the user deafboyz_admin in the db and gave full privileges, reboot, etc and still no luck.
all my passwords are loaded into the local Database as they are in the file db. restarted the computer and clear the history, what else could be possibly originally xampp try using the old db details?
Thank you for your understanding!
There is always something that connects your video to a file that is trying to connect to the DB by using the credentials of the old. You can share your PHP code with us login script? Also, check that the connection on the video page setting is correctly set in the correct file that contains the new credentials.
-
Window Vista. Loading failure using the VxD (code 19) charger?
I scan my computer and it says that my compact flash is not working and 'Failed to load using the charger VxD (code 19)' how can I fix.
Also when I play all the games, such as mabinogi, the game begins to lag very much, even to freeze sometimes, thinking its because of this error. Computer was fine before I booked the error. Help, please.
Hello
19 error code means there is a driver conflict such as two devices attempt to use the same resources.
Run the Fixit diagnosis toll from this link to automatically fix the problem.
Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/GP/hardware_device_problemsKind regards
Afzal Taher-Microsoft Support.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
* I have already connected to fss.live.com and https://familysafety.microsoft.com. This solution does not remedy the issue.* *.
When you try to use the Windows 7 parental control features, it first asks you to connect to Live. When I do, I get the 8004B3E9 error Code and it asks me to "connect to account.live.com and accept the terms of use. However, in doing so, there are no terms of use for me to accept. I also go to fss.live.come and familysaftely.microsoft.com and no option for the conditions of use is available to accept. In addition, I tried different browsers.
I can connect on Live.com and view my account easily, but without conditions of use prompt appears for me to accept, so my attempts to use the parental controls are stuck in this cycle, where it won't let me past without accepting conditions that do not seem to exist.
How can I make sure I am set up as the account 'Parent '.
Help, please
3 hours later I'm finally able to access Family Safety. Thank you!
The correct link to solve the "Terms of use" requirement is:http://g.live.com/0fsenus4/nexusmigrate
-
I have created a merge document and mail merge in word using an excel sheet spread as a data source. Initially, no sign of £ showed in the document among other formatting problems. I have (finally) found help explaining that I should use MS Excel via a DDE data sheets - I tried this but it seems to corrupt the data so that the column that contains say '1 names' contains "price data", "address" line contains the data of 'comments', making the e-mail merge nonsense.
If you use an alternative data source is CBO or something all NFL results (which wasn't shown on the worksheet) appear in the mail merge '0' both are unacceptable.
Surely I'm not the only person to meet these challenges is the software never tested before being sold where is the help manual, I tried to use the online help but will not accept my product key. All solutions provide the most basic assistance but my documents are fairly complex something computers should be good. I lost most of today on this. Sometimes I think it would be faster to type these longhand things than to use a Microsoft product.
Hello
Please check with the experts of the Office, Word and Excel here: (just repost your questions)
Answers - Excel Forums
http://answers.Microsoft.com/en-us/Office/ee861099.aspxAnswers - Word Forums
http://answers.Microsoft.com/en-us/Office/ee861096.aspxAnswers - Office Forums
http://answers.Microsoft.com/en-us/Office/default.aspxOr
Discussions in Excel worksheet functions
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.worksheet.functions&lang=en&CR=usDiscussions in Word Application errors
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.application.errors&lang=en&CR=usDiscussions in Excel General questions
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=usMS Office discussion groups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
And here:Discussions in microsoft.public.excel.worksheet.functions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel.worksheet.functions&cat=en_us_b5bae73e-d79d-4720-8866-0da784ce979c&lang=en&CR=usDiscussions at the Microsoft.public.Excel
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Excel&cat=en_us_a09d72a4-715e-4c37-bcd5-75e0fc616b1f&lang=en&CR=usMicrosoft.public.word.application.errors discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Word.application.errors&cat=en_us_f09268b3-8479-4cea-8037-d168d96833ac&lang=en&CR=usI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Please provide ideas to the next question. In an attempt to sign and date a w-9, I get the following message. "This form is editable in Adobe Acrobat DC. Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?
Thank you
Rick
Assuming that you are dealing with a PDF file provided by the IRS, you will not be able to e-sign. but you can fill the fields using Adobe Reader or Acrobat. The version of form W-9 that I have does not include a date field, but you can use the feedback tool add text to add a date. You can also digitally sign or use the annotation of pencil tool to draw a signature.
Maybe you are looking for
-
Hello world I have a satellite M30, and the 'PC Diagnostic tool' utility does not work (nothing happens when I click on the program). I have windows XP service pack 1. I uninstalled and downloaded a new site of toshiba, but it still does not work. No
-
Hello I developed an application to detect interruptions generated by an electronic card and act accordingly. The program was developed in labview, but she calls a dll; created with labwindows. The dll is scheduled to open the visa communication, sel
-
Hello, I am looking for an analysis about the .tdms file which is generated from my LabVIEW program. I have a program that generates a. TDMS file with thousands of data points that the things on the list, such as date/time, status of pine, County of
-
I successfully downloaded and run this: http://www.ni.com/white-paper/2991/en and I know it works because I can see the pulse train on channel #1 on my osciloscope. I modified the code example from the Web site to use width and pulse rate buttons whi
-
installed update now no sound! _?!?!
OK, so I'm on a Compaq Presario f769WM computer laptop running Vista Home premium, AMD Athlon 64 X 2 Dual - Core Proscessor TK - 57 Nvidia GeForce 7000 M / nForce 610 M with conexant hd audio internal speakers I tried EVERYTHING... I have uninstalled