Attempts to connect to the Dell V505 printer wireless set up - get error "WSD Print has not a driver" peripheral.
I'm trying to set up a printer Dell V505 to a Dell Studio laptop running Windows 7. I followed an indicating knowledge base article I want to uninstall my driver from dell and installed by using the Windows Vista SP2 compatibility mode, what I've done. After having done that, I'm gettting error "WSD Print device is not a driver" I'm not sure if it's a windows problem or from dell if seeking answers at once.
This printer connected easily to the Vista desktop running when put in place wirelessly.d
Thanks for any help.
Connect to the device using the WSD Protocol is available only when it is directly connected to the printer. Try setting the printer using a Standard TCP/IP Port or if the Vista machine is 32 bit, and Windows 7 machine is also 32 bits (or the two bits 64) sharing the printer from Vista and establish a connection to get the installed printer driver, and then perform the network plug and play on the Plug-and-play device should use the driver to install the rest of the unit.
You will need the network printer configuration page to obtain the host name or IP address and create a Standard TCP/IP Port. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
Tags: Windows
Similar Questions
-
Same as above
Hello Puppyg1rl,
Please post on the forum. The 1710n has no drivers Windows 8/8.1, not is it no to release due to the age of the unit. Your best option is trying to use the Windows 7 drivers in compatibility mode following the instructions below.
http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-1710n/drivers
Kind regards
Joseph E
-
I cannot access the application 'contact me' when a web site and receive the answer "Default Mail Client not properly installed" instead of going on the requested site.
How can I fix this problem?
Separated from the:
CrystalBall © SEZ...
Unlike Windows XP & Vista, Windows 7 does not include a default email Client. [What were thinking?]
You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In these forums, you will find support for Windows Live Mail: http://windowslivehelp.com/forums.aspx?productid=15
-
Internet printing using dell V505 printer problems all in one
have dell V505 printer all-in-one. Some print orders follow completely, some don't at all, some printing course and stop all of NET applications. Whats up how much - what I do
OT: printing problems
Hi Judy,.
Thanks for posting in the Microsoft community
From your problem description, I understand that you are not able to get some tracking of print through completely controls. Please let me know if you do not experience this problem.
What web browser do you use?
I suggest you try the following
Method 1: Some webpages specify exactly where text should print on the page. If the Web page you're printing specifies exactly where the text should print, Shrink To Fit will not work. You work around this problem by setting a custom preview before print scale factor. For more information about print preview, see
http://Windows.Microsoft.com/en-us/Internet-Explorer/print-webpages#IE=IE-9Method 2: Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Method 3: we will try to uninstall the drivers for the printer from the computer.
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivershttp://www.Dell.com/support/drivers/us/en/04/product/Dell-V505
See also the links: Printing webpages: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-frequently-asked-questionsWhy can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-printHope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
-
the dell photo printer 720 32-bit vista driver work with xp?
the dell photo printer 720 32-bit vista driver work with xp?
No, a Vista driver will not work with XP.
Check the Dell support site to see if they have XP drivers for your printer.
Reference Dell Driver Downloads:
-
Try to reinstall the Dell A920 printer. He stopped working because I kept getting a message saying "soecified unknown print monitor. I removed it by using control panel/Add Remove Programs, now I can't reinstall it on the CD. I get the above message when trying to load it.
Thank you.
Problem solved. A server called LexBce did not work, it has been disabled.
To fix it, I went to start / my computer
I have a click right on my computer and select manage. When the window open, I open Services and Applications, and then open Services. I then scroll to LexBce Server, open only to the top, under the general tab change the startup type to automatic, and restarted the machine. The Dell software then loaded properly and now the printer works.
-
Microsoft Visual C ++ Runtime Error with the Dell 962 printer
The operating system is Windows XP on startup, I get an error message, to load the driver on the Dell 962 printer.
The printer prints, however other features like scan do not work.
I have re-charge the driver with the same problems.
Also, if I try to open the Dell 962 All-in-One-Center, the error reads Mircosoft Visual C ++ Run Time Error.
Hello 1946mike,
Thank you for your message. Try to remove the software from the Dell printer and the driver, reboot and reinstall. After you remove the software, click HERE to download and install the driver from the last and utility.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
There was an error when you attempt to connect to the Windows Live Calendar service.
I get this message when trying to update my calendar:
There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.
What can I do to fix this?
Hello Maurizo Martino,
As your question deals with Windows Live Calendar, there is a forum for Windows Live products.
Please post in http://windowslivehelp.com/ under the category of Windows Live Mail.They will have experts in the Windows Live products that can better help you.
Sincerely,
-
Keyboard Slim lose the connection with the Dell coming 11 Pro
Someone meets keyboard slim interruption of connection with the Dell pro 11 site?
He might have to unplug the keyboard, and the re - attach the keyboard to the Tablet again to use the keyboard.
I have two Dell 11 pro + keyboard slim venue. Both devices have this kind of problem.
It's absolutely wrong.How to solve this problem?
Besides working with Dell Pro they explained to me that the keyboard must be used on a flat surface (not towers for example) and the keyboard & tablet should be at an angle of about 117 degrees between them. Now, of course, you can't measure it, so just assume if you use on a table or desk and its supported properly you have to the correct angle.
I find that if the keyboard does not after sleep or start arriving, simply lift the keyboard out of the surface of the table a few inches and let it fall down. It will immediately start working. I think that there is a sensor in the keyboard, which is not always realize or to calibrate properly in coming to life.
If you have complications beyond the keyboard chip out of sleep, I'd take it upward with the support to push the issue.
-
Samsung Galaxy S3 does not connect to the DELL laptop
Hello
I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop
We could not see the content of Samsung Mobile in the PC. No Popup message is coming
I tried the options below
1. connected with different cable to the laptop, the original cable
2. try with Samsung Kies
Can you please help us in this regard that I wasn't sure if the drivers problem.
We have seen the error in the mobile below.
"Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.
You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »
I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop
Thank you
Kalyan
Hi Kalyan,
From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.
Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.
I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.
To uninstall a program see the link below.
Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.
-
Original title: when I start my windows live mail. He asks me if I want to go online? Then, I get this error message? just started doing this yesterday?
There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.
I'm going to ask you to start your own, new topic in this forum now for Windows Live technicians can help you more-online http://answers.microsoft.com/en-us/windowslive/forum/livemail-calendar
Tip: Include a link to this topic in your very first post so that Windows Live people know so much about your computer like I do.
Good luck - I think that you're going to need!
-
Epson XP200 not to connect to the laptop. Printer works fine by itself.
A new Epson XP200 connects to the laptop. Printer works fine by itself.
From Internet Explorer
Original title: connection
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
Attempt to connect to the server
Hello
I try install cretive cloud (CreativeCloudSet - Up.exe) on Win 7 X 64 ENT PCs, but I have this message "Attempt to connect to the server"
It seems that this is a problem of security network in my company, could you tell me what are the ports and addresses to allow.
I tested on a direct ADSL post and I have no problem
Thanks for your advice
You can find the necessary ports on link below
-
Attempt to connect to the Hub of environment management
Hello
in tools 8.50 on Win 2003 Server; I'm configuration BPSAA.
In the management environment for the server, tab I gave Localhost and port I gave 5283 (given file configuration.properties).
And StartAgent.bat is running:
When I use port 80 it's OKSending pulse from 'com.peoplesoft.emf.peer:id=5' Sending pulse from 'com.peoplesoft.emf.peer:id=5' Sending pulse from 'com.peoplesoft.emf.peer:id=5' Sending pulse from 'com.peoplesoft.emf.peer:id=5'
But when I press on the Ping button, it remains on the attempt to connect to the Hub of management environment and that it will not forward.Ping Environment Management Hub Pinging localhost OK Pinging localhost OK Pinging localhost OK Packets: Sent = 3, Received = 3, Lost = 0
Any idea?
Thank you.The Port number is the port number that your PIA (which the hub EM belongs) is running on. By default, it is 80 unless you specified something else when you generated the field. 5283 is used for default agent port, not the HUB which is what you are trying to ping, so 80 works which is not a problem as long as you have found ok returned when ping.
Onward with Assistant to change!
-
Dell 1320c printer does not print
Original title:
incompatibility between my windows 8 and Dell 1320c printer will not print
My Dell 1320c printer will not print: I use windows 8, it was ok with my windows 7.
Tom O'ConnellHi Tom,
The printer is compatible with Windows 8. You can check this link for the same.
Please answer these questions for an easy understanding of the issue.
- If it works much earlier?
- Do you have an error message when you try to print?
- You are not able to print any file (offline files and offline files), or is the problem specific to specific files?
- What application you use to print?
You can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name, model, and version of the software driver that can help you troubleshoot printer problems.
You can try the steps from the following link and check if that helps.
Reference:
The post with the State of the question and the required information.
Maybe you are looking for
-
I have a laptop Dell Latitude D830 and I'm desperate to know how to disable the touchpad/trackpad.
-
From a security point of view, I don't want to not allow Adobe Flash in my democratic security but whenever I hit the sayinf box not to allow that box keeps popping up even though I tell him permit. Very frustrating.
-
How can I fix it? It's a little light gray at the bottom of each page.
-
Hello Is there a way to get the name of the user of the device? Thank you Ty
-
Activation problem. What should do?
Have photoshop CS2 and can not activate it online (error 24:24) or by phone (not available more). What can I do?