Default user name?

Similar Questions

• Default user name and password on Stor.e Tv

  Hey,.

  I just bought a 2 TB stor.e TV set and switched all my files on it, I am trying to access the network and it asks me a username and password but I never put a!

  Do anyone knows the default user name and password OR do you know how I can create a?
  Also has there NEVER been an update of firmware for this thing?
  Best thing I can say, is that there has not been since 2010.

  Any help is greatly appreciated!

  Bravo guys,.
  John.

  To my knowledge the TV StorE is not secured with any passowords.
  I think you should try to Stor.E TV to factory default value.
  To do this, you must go to configuration-> General Setup-> default.
  But if it fails, and the store TV is not able to start, then this may be a malfunction of the equipment.

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• Default user name and password after destructive recovery

  I have just completed a full destructive recovery on my laptop, Windows Vista asks me a username and password but my old profiles were deleted, any ideas if there is a default name and password should I use?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Show only the default user name and password

  Hi all
  
  I want to just display the default usernames and passwords. Can I do this?
  
  Thank you!
  Dan.

  Try this,

  SQL> SELECT USERNAME,PASSWORD,CREATED FROM DBA_USERS WHERE CREATED <=( SELECT CREATED from v$database);
  

  Note:-some of us who have done more than a CREATE CONTROLFILE and observe what is happening know that V$ DATABASE. CREATION is not 'Date of the creation of the database'.
  It's actually "date of creation of the * controlfile."

  Source:-http://hemantoracledba.blogspot.com/2010/07/vdatabasecreated-is-this-database.html

• Cannot find the user name and password

  I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

  ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

  Download Firefox from this page:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• user name and password/password

  A wonderful Hp Officejet Pro 8600. Print the page of network configuration, is gone to the IP address and attempted to set an access code using admin for the user name and the password # print of the NCF. Now, whenever I try something it doesn't let me sign as a username: admin password: password #. I was trying to add security to 8600 wifi by changing your user name, password and SSID hiding. I failed, counting on you to help please.

  Hi syklopx,

  Welcome to the Forums of HP Support! I understand you are trying to add security to your wifi of the Officejet Pro 8600 by changing the user name, password and SSID hiding. Now, you can not access it by using the username and password you set up.

  I would like that you go on the front panel of your Pro JO 8600 and restore the printer default settings (need to connect to your wireless again):

  Menu Configuration > Tools > restore default settings

  (1) requirement for access password turned OFF
  (2) default user name is ADMIN
  (3) password is EMPTY
  
  On the front panel of your 8600 JO set up the wireless:

  Menu Setup > network > Wireless Setup Wizard

  Once you are connected to your network, print your network settings page, get the IP address and access the integrated Web server. Here you can see all / manage all settings, including reset built-in web server's past Web integrated server.

  I hope this helps!

  Thank you

• Web Access: Login failed due to a bad user name or password

  What is the default user name and password to connect to the Web 2.0 Server access.  I had it installed on XP x 64 and was able to access.  Installed Vista Ultimate x 64 and I am not able to connect to web access with my user name and password for XP.

  The user is the local administrator for your host PC user.

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• default login name

  I'm running on a server ESXi VIMA. I was talking with a colleague when I assigned the password and missed the default login name which I suppose was root.

  noob question, at the login prompt, which is the user name?

  The default user name is admin-vi.

  Chris

• automatically default mto "my user name.

  When I boot my windows desktop xp home, the screen open to my username and his guest. I have to choose my user name to load my settings. How can I automatically make my default username and eliminate the step of selection between comments and my user name? I have

  There are two ways that you can do.  One is described in the following article:

  «How to open automatically log on a user account in Windows XP»
    <>http://support.Microsoft.com/kb/282866 >
  You may need to disable the guest account to do this.

  Another way is to download and install "TweakUI" of Microsoft.
  TweakUI: <> http://windows.microsoft.com/en-US/windows/downloads/windows-xp >

  After Installing TweakUI, run it from the start-> programs-> select and menu PowerToys:
  Logon-> Autologon
  in the left column.

  HTH,
  JW

• By default the user name for RE website?

  What is the default username for the site Web of Reader Extensions?

  http://localhost: 8080/ReaderExtensions.

  I have the password in hand, but dono what is the user name.

  Can anyone help?

  Nith

  The password you have is the certificate you are installing. The name of user and password you need to connect to the user interface is Administrator and password. You can assign the role of RE userinterface access to any user through the /AdminUI.

  Paul

• How to set to default group or user names in the Security tab?

  I am trying to listen to music from my laptop to my PS3. I reinstalled my laptop without picking up my external hard drive and it has messed up the security settings in the files. I fixed it for my videos but I don't remember how. My videos has the default user in the window:

  Everyone

  HomeUsers (Robert-PC\HomeUsers)

  Robert (Robert-PC\Robert)

  WMPNetworkSvc

  The window under the Security tab of the My Music folder has these users:

  S-1-5-21-2475358272-913278994-1741288185-1000

  S-1-5-21-3176736344-3858995767-1895752026-1000

  S-1-5-21-3176736344-3858995767-1895752026-1001

  Robert (Robert-PC\Robert)

  How can I bring to the security of the folder tab music to look at as they are in the video folder security tab?

  I checked everywhere on the internet and have not found the solution. I found it using Google, but I forgot the link to the site on which I found it.

  I suggest you to change your setting of security manually right-click the swith folder, select Properties, Security tab, select modify and delete the three main users or groups. After that select Add, select advanced in the dialog box select users or groups, and click Find now. In the search results panel, select the user or group to which you want to add (for example. Everyone or something else on the Security tab of the folder of your video you want to add), and then click OK until all the dialog box is closed. If there are error messages appear during the process, please take note and post them here. I hope this help you.

• The number of entries plist should be in/var/db/dslocal/nodes/Default/users?

  The number of entries plist should be in/var/db/dslocal/nodes/Default/users?

  I was checking the files of password on several windows and machines unix to work but decided to check my Mac at home.  When I checked for password files, I found 4 entries in/var/db/dslocal/nodes/Default/users:

  1 daemon.plist - I guess that's for the process system since 'realname' = > [0 = > "System Services"]

  2 nobody.plist - set in the plist as a 'realname' = > [0 = > "Unprivileged user"]

  3 root.plist - defined in the plist as a 'realname' = > [0 = > "System administrator"]

  -It worries me because it has a very small password

  4 #user # .plist - This is the actual user of the file systems

  The problems are that I do not see the other users of the system, and these files can be manipulated to provide a negative person back privileges on my system.

  Thank you

  What you see is correct. There was also about 85 other users whose names begin with an underscore. The short passwd in the root.plist must be ' *', which does not allow the connection.

  C.

• Photosmart HP 5510 invites to indicate the user name and password

  Hi people,

  I put a static IP address for the Photosmart HP 5510. When I navigate to , I get a pop-up dialog box requesting a user name and password.
  
  Does anyone know how to reset it on the Photosmart HP 5510?

  Thank you very much

  concerning

  Hey Joe,

  Try the following steps below.

  1. press the button on the control panel wireless

  2. tap on settings

  3. scroll down to the network by default, then press Ok

  You should be able to access the security settings in the built-in Web server now. Let me know what you find?