ATTENTION: Application has not specified its requirements for authorization in application.xml NOTE: the application was packed with a runtime in captivity.

Similar Questions

• Surely the size measure LMT has not the same

  Hello
  
  If we identify not UNIFORM, surely the size of the measure has not the same.
  
  However, http://www.oaktable.net/articles/locally-managed-tablespaces States
  
  + You can ask yourself, "If a single bit is a measure, probably all extensions in the tablespace are then obliged to present the same size?". It's true -as in the example above, Oracle allows you to specify any size you like, but it will be always reduces to a number of bits of the bitmap, where each bit represents a segment of the space. In any case, it is advisable for all extensions in a tablespace to be the same size, because it eliminates the space lost because of the fragmentation. +
  
  Doesn't it not bad?
  
  Thank you.
  
  Published by: OracleGuy777 on March 13, 2012 13:16

  OracleGuy777 wrote:
  So, you're saying that each bit in the bitmap LMT will be the size as much as the lowest possible? And if we have a measure 1 M, it is going to be 1 024 000 bytes?

  Only the hard drive manufacturers use 1 000 000 bytes. The rest of the computer industry has pretty much standardized on 1 MB = 2 * 20.

  In addition, if the BLOCKS are 8K (or 2K, 4K, 16K, 32K) and 8 K = 8192 bytes, and if 1 MB MUST be a multiple of blocks assigned, you can check quickly enough that 1 MB = 128 x 8 K - BLOCKS. (And Yes, you can choose ANY size you want for a block, but that can get silly and will probably cause "opportunities for off-peak service calls").

  And we know that extensions are allocated in BLOCKS. (So why no Oracle used number of advancements of level measurement?)

  >

  So if we have a 64K extent, followed by a measure of 1 MB, followed by a measure of 64K, Oracle will store as

  1 followed by 1 s to 1 M and then 1 for the next measure 64K?

  To answer your question (even if it is answered on this link to the Oak Table - explicitly)

  The ILO plan represents the size of measurement RB. And non-linear growth that the system uses after distributing a few extensions will always be a multiple of the size of this base.

  Then the first few times the table grows, it will be in blocks of 64 k with each piece slightly.

  The next time it grows, it will say "I have seen the growth here before and to save effort later" so it will distribute pieces of 1 M. And a piece of 1 M is 16 x 64K, so each piece of 1 M will be represented by 16 bits. Then, after a few of those pieces of 1 M, it will distribute pieces of 8 M and guess how many 64 K parts there are in this 8 M chunk - each represented by one bit.

  And since all this piece pieces in this specific tablespace are 64K, if a table is dropped, all of its pieces can be distributed to other tables/segments as needed with no wasted space.

  That is the second reason to use LMT.

  Now you know.

  But, how does that help you administer the database? (Other than following best practices to use LMT?)

• Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

  Hello

  Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

  on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

  Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

  The error logs:

  Setupact.txt

  2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
  2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
  2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
  2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
  2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
  2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2012-11-04 01:08:42, info UI entering Page Cancel.

  Setuperr.txt

  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

  Any help will be greatly appreciated.

  Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

  Thanks again.

• The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when selecting th

  The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when you select the particular model.

  The problem does not appear, if PH 13 items is run in administrator mode.

  The available computer resources are rather big enough: INTEL CPU i7 4 cores, 16 GB RAM, 1 TB HDD + 32 GB SSD, Windows 8.1.

  Please, advice how to fix this problem? Perhaps, there is patch or update available?

  I had this problem with some of the choices menu in PSE13 when my drive to work was only a SSD with 53 GB of free space. I assigned a second disc of work (my data disc with ~ 2 TB of free space) and the error disappeared.

  Scratch disk settings can be found under preferences / Performance.

• Why squeeze foutmelding ik "Drive has not the ability to access this service" als ik een try PDF you i.e. Excel, said very wel naar in mijn subscription zit?

  Why squeeze foutmelding ik "Drive has not the ability to access this service" als ik een try PDF you i.e. Excel, said very wel naar in mijn subscription zit?

  Hi marcb53473002,

  Make sure that you use last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the services of export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC , as older versions does not now support.

  Alternatively, you can use export to PDF of https://cloud.acrobat.com/exportpdf online service

  Kind regards
  Nicos

• I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

  I would like to revive my laptop to its factory settings, but I don't have the cd that came with it. is it possible to do this if my laptop?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  HELP me get my E mail.

  When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

  Hello

  1. what operating system do you use?

  2. What mail client do you use?

  3. you have made any changes to your

  4. what site you're talking about?

  5. How do you access the webpage?

  6. you use Internet explorer or another browser to access the site?

  The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

  Are you referring to http://www.bee.pl/index

  Refer to the following, who says that the sites host malware

  http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

• Code 45 for zune. Peripheral USB of States is defective; Windows does not recognize it. This is for XP. It has worked before and nine for Christmas. I have all the updates, etc. My Zune software starts whenever I plugged it to my computer.

  That's my XP OS.  He worked before that date and a new Zune for Christmas, a couple of days.  I have all the updates, etc.  My Zune software starts whenever I plugged it to my computer; now all I get is the error above.
  The zune turn on when connected load, and the system can't recognize not like before.  After troubleshooting, I actually uninstalled the usb and the reinstalled system but said that there is a problem.
  Help!

  Hi, Jason and thanks for your response.  Unfortunately, this was not correct.
  After several tests, including two restarts then stop / restart, I just gave up and let it go... and then, the next day, I retried it, and it worked! I don't really know why, but I have a feeling. While I was working with my zune by itself, I went to albums, shuffle all and then my Zune completely erased, restarted and then played as usual. I think that this reboot of my Zune has helped my system to detect.  What do you think?  Also, I can do the same thing somehow - do a "reboot/reset" my Zune?  In any case, my Zune works perfectly, I really loved and added additional music to today and bought a warranty last night.

• THE ATTENTION! Has not detected one or more drives during POST

  I have a desktop T7400.

  during post, I get this error:

  "WARNING!" Has not detected one or more drives during POST

  Press F1 to continue... »

  I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.

  I have 1 CD-ROM and 2 sata hardrives on the system.

  I need help please.

  Thank you

  Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.

• QUESTION: Has not the spirit of disks installation CS6 MASTER COLLECTION (MAC).

  INTRODUCTION

  recently cleaned my SSD - MacBook Pro (OS X 10.11.3) during maintenance of warranty Mac Repair Station

  Try to re - install the CS6 Master purchased collection.

  Have used my disks to DVD - SVAD 654 K-1 and SVAD 654 - 2, as well as 24 digits keys series number/access code

  I'm normaliter using the application on 2 systems, that I have 20 iMac and MacBook Pro (this is within the limits of the authorization)

  Maybe the application was not properly deleted before deleting it when my MacBook went in for repair under warranty.

  I thought I could reinstall as it is always the same IP address and the same serial number in MacBook

  PROBLEM

  Start of my DVD with CS6 Master Collection (for Mac OS X 10.6.8) NL, asks my 20-digit number. Have that are available, but it says "invalid", after a new attempt, the Council is to contact the Service Support from Adobe.

  Under my ADOBE ID, checked my products and CS6 same number is displayed there.

  
  

  QUESTION

  Please can investigate the matter.

  • explain why,
  • reset the settings of your registration (if that blocks the re-setup and recording)
  • teaching how to get to the installation of active in re-registration as required

  concerning

  Arthur (NL)

  If you do not disable the installation before the uninstall/clean you lost activation.  In this case, you will need to contact the Support from Adobe via chat and ask them to reset your activations, which all will provide you with facilities.  Nobody here can perform the reset for you.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Size of RAM required for Soa Suite 11 g in the development environment?

  Hi all
  
  I have a question about the optimal size of RAM required for soa suite suite 11 g in the development environment. I can see the facility of documents which
  
  
  Logic of Web-> 2 GB
  SOA Suite(soa server and BAM server on web logic) - > 2 GB
  Developer of J-> 1 GB
  
  A total of 5 GB, since we are new to 11g we're not sure, cannot therefore anyone who uses the comment 11g on the optimal RAM necessary for execution of soa suite 11 g with the developer of J.
  
  Thank you

  Try to have a separate for the SOA Suite, for example the server machine. Then use JDev developer machines.

  It really comes down to how much load you put on your environment. I would recommend 4 GB but I ran fine with only 2 GB. The question of having JDev on the same machine is that JDev can very very hungry memory and can / will affect developer experience.

  see you soon
  James

• Pavilion HPE series, LP028AV # a: Windows has not started, but ended up with Recovery Manager without control

  When I started my desktop computer, Windows did not come to the top, and then he came to the Recovery Manager window. So, I wanted to select System Recovery, but the wired keyboard seemed to be locked and so was the wired mouse.  No selection is possible on the window. Please help me to unlock the keyboard in order to proceed to the recovery of the system or to correct the problem.  I also tried to restore the system from the recovery disks, but the keyboard and mouse have been locked as he came to the Recovery Manager window. Here it is a little recap of my office-info:

  Product name: Pavilion HPE series

  Product number: LP028AV #ABA

  Model number: h8 - 1070t

  Thank you for your help in advance.

  Jay

  Hello.

  After replacing the batery, I got a black screen. But I discovered that the cable from the monitor was not completely connected after that I moved the PC and the monitor. Once I fixed and restarted the PC, keyboard and mouse are animated.  I'm currently running System Recovery.

  Thank you for your excellent support as well as your patience.

  Jay

• What password is required for connectivity to my wifes on the network computer?

  Of my wife and my machine is connected to the router Ethernet.  I get this message and have no idea at this stage what password is requested.  She uses Win 10 and I am on Win 7.  internet connection issue basic I know but I'm not aware at all on these issues.  Thank you.

  cannot post a picture here is so going to try describe the message.

  up: enter the network password

  the following line: "enter your password to connect with: MOM.

  Then the box: my computer name and the name given to the router

  the next area: request password

  the next box: "use another account.

  I tried every password I have for the system and computers with no luck. both machines are identified as being a "home network" with all the options set to 'on' password sharing and selected 'Off '.   any ideas?  Thank you

  To remove the network password, you must change the settings where the network was setup. To do this, connect your PC to 10 Windows and follow the steps below:

  1. Open the Control Panel.
  2. Click network and Internet.
  3. Click network and sharing Center and change advanced sharing settings.
  4. Click on all the networks and scroll down to password protected sharing to change the setting.

  

  Let us know how it went.

• Why 5.5 vcloud Director only has not the ability "add a network to an organization?

  I have deployed the ovules of Director 5.5 vcloud in my lab environment and watching videos. In the videos, the guy has deployed vcloud Director 1.5 eggs. I noticed that this homepage of vcloud Director 5.5 is not the option 'Add a network at an organization' as in vcloud Director 1.5.

  Did remove this feature in 5.5. Then I thought that it could be controlled from within the Organization after you create it, but again once I created the Organization, there is no option to add a network to this organization? I'm playing something here? How can we tolerate that they are private, the administrator of the Organization to create a network that is using a NAT or directly connected to the external network on the fly and remove it once it is not necessary. I though that it was a feature of the vcloud Director.

  I used the EGG apparatus, I have use the .bin file.

  Your help is appreciated. !!

  You EF network pool Org vDC wide (it's in properties)

  At the same time that you create a network Org inside the Org vDC going to just use the current network are entrusted to him.  Then, you make all your usual choices.  to do this, vDC display Org itself... go to list of org vDC in manage and monitor, and then double-click the VCC Org that you want to add a network.

  VAPP networks work exactly the same, create you them at the time the vApp is created.  This will use the network pool that is currently assigned to the Org vDC when the TIME Gets deployed.

  Overall, the function at the level of the consumer (org users) is the same, the process-level administration system has changed a bit.

• demand has been to package with a runtime in captivity

  Hi all

  The system configuration:

  Flash Pro CC

  Use of AIR 13.0.0.95 for iOS

  Use of AIR for Android 13.0.0.95

  I could test my app (DeveloperProv and DeveloperCert) and send (DistributionProv and DistributionCert) to iTunes Connect Using Flash Pro CC successfully > AIR for iOS. My application is currently pending review. I'm fine with the part of the iOS.

  Currently, I'm trying to publish my APK, I did and a get a window display "Adobe Flash Professional > APK was set successfully, but a warning." Note: the application has been the package with a captive runtime. »

  The message is a little confusing, firstly the APK is successful, and then a warning occurs. Is that what I can do to get rid of this warning? Is how important it?

  Thanks in advance for any further discussion.

  Flash is just show something that this ADT reports. It is not a mistake, it's just an observation. You can't get rid of it, and no, it's not bad.