ATV 4 turn on automatically, and all connected equipment, for no apparent reason

Similar Questions

• VIX 1.6.2 and ESXi 3.5.0: connection drops for no apparent reason

  I used vix to drive a virtual machine hosted by workstation, but I update this code (c#), to drive a virtual machine hosted by ESXi.

  I have a lot of problems with the connection to the abandonment. I set up a ping t on ESXi box and on the virtual machine I want to drive, and that shows a consistent link. However, I find the following:

  • If I call Connect successfully and then add a call to Open, on a regular basis, the call will fail with VIX_E_HOST_NOT_CONNECTED. I put the Connect and Open calls in a loop to try again with a break of 20 seconds between each attempt. After 3 or 4 attempts it usually connects.

  • If my program does a job without talking to the VM for about a minute, the connection drops usually such that if I try to call RunProgramInGuest after use the Vix api for a minute, it fails with "not connected". I put in a call to try again 'connection' before running a program on the virtual machine. Failure, I run the connection and open the loop to try one more time and then question the RunProgramInGuest call, I wanted to once again and it works.

  • However, I'm stuck, if I call RunProgramInGuest and then wait on the handle of the job, he is generally ok unless in the guest takes more than a minute or so to run. In this case returns never wait and the program is blocked.

  Anyone who knows the connection drop like that? What solution did you use to solve the final problem. I considered trying to exceed a reminder in, but the wait is failing, I expect that a reminder be never called back either. The other option I'm considering is that every time I call RunProgramInGuest, I actually run a script on the computer virtual who runs the program, then writes a file. So I can query reconnect, reopen and reconsignation-in in a loop to try again, and a quick turnaround program that looks like the existence of the file that tells me the program finished. It sounds crazy, so I hope that there are better suggestions!

  Any suggestions would be greatly appreciated.

  -Scott

  -

  ---

  In addition, if the guys from VMWare VIX watch this group discussion. Here are two suggestions: If you want a badge of the ViX API in the top level, the logic of reconnection must be internal. In addition, a native managed API which requires no installation of COM stuff would be very welcome.

  I suppose that you keep reopening a connection and garbage collection operation, it destroyed in a random delay. That's why you see inconsistent results. I suggest you to take VMWareTasks and rewrite the code that you do without anything resembling a retry. It should "work".

• MacBook loses the Internet connection often for no apparent reason

  Year old MacBook Air loses connection Internet (cable modem) almost every day, in my house and other places where the connection is wireless.  I have an appointment in the preferences system, network and cross the help me / diagnostic process and after all of the steps, he said the connection seems to work, and when you do that, it is.  This does not happen with my old iMac that often turns at the same time.

  If "old year" almost means "one year", then I strongly suggest that you take it to a Genius Bar for the hardware test before the expiration of the warranty.

• Win7 gadgets (sidebar) slow and intensive CPU lately, for no apparent reason

  In recent days, all my Win7 Gadgets react very slowly; The Process Explorer and Task Manager indicate that SIDEBAR. EXE is to eat about 10% of the 8 Virtual cores (4 physical) of my CPU i7, one of the nuclei between 0 and 100% just for this process. Among the consequences: fast battery drain and the unnecessary fan noise.

  So far I have tested the following workaround solutions, without success:

  • Out all the gadgets / reload one by one
  • kill the process from the sidebar / restart the Panel gadgets
  • Restart the PC
  • run with Avira AV disabled
  • run without internet access
  • run without connected devices (wireless, USB, etc...)
  • remove the settings.ini and cache in %localappdata%\microsoft\Windows Sidebar (suggested in other threads on such responses)

  I have a few third-party gadgets, each of them has worked perfectly so far (and none have been updated these last time).

  I can't think of any change in my system lately (software, drivers, etc.), which could have caused this.

  Murder sidebar.exe immediately pushes the CPU counters to zero. As soon as I open the Panel of gadgets or load any of the built-in gadgets one or a third party, the problem starts.

  Win7/64 SP1 and Avira Antivirus are completely up to date.

  BIOS and drivers are up-to-date (precision M4700)

  Thanks for any advice.

  (cross-posted question on the Microsoft Answers and Avira forums)

  Gadgets have proved to be insecure long time. Should have uninstalled all the.

  http://Windows.Microsoft.com/en-us/Windows/Gadgets

• I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back?

  I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back? IT DON'T ME LET HIM DO ANYTHING. I'm using another computer to do this because it won't let me go on the internet or access all programs! I don't want to buy the secuirty cause im going to buy another computer soon as soon as sales are made. but I need this one until I can do my school work and Exc...  any help?

  Makes it look like one of these:

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  http://www.bleepingcomputer.com/virus-removal/remove-Internet-Security-2011

  If this is not the case, see if you can find it in this list

  http://www.bing.com/search?q=site%3Ableepingcomputer.com%2Fvirus-removal%2f+Vista+2011&QS=n&SK=&SC=5-51&form=QBRE

  Use the instructions in the manual. Do not download anything from advertising on the page.

  As you can not access the Internet, you will need to download all the tools you need on another computer and transfer on the computer infected with the help of a USB Flash drive.

  You can also try the Microsoft System Sweeper Standlone:

  http://connect.Microsoft.com/systemsweeper

• All my files and pictures have been deleted and all my settings for my computer after windows update

  Original title: update of Windows 8

  All my files and pictures have been deleted and all my settings for my computer after the update of windows. I need some answers! Microsoft you need to find something to say to me. WTF! Your update has ruined my computer

  Shawn,

  I think this isn't the Windows update that caused this problem. It could be something else the cause. Windows Update never removes any of your files and folders stored in the computer.

  You can try a system restore to a previous point when the computer was working properly.

  see this link:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

• Mode Lr library my records show the correct number of photos, but when I select the folder it show "is selected any phot" as if the foder is empty. This happens on most of the files not all. I then import from my C drive and all is well for a while, then

  All records of the library of Lr see all of the photos but when I click on a folder I get 'no photo selected. I import all of my photos and all is well for a short period then the images seem to disappear again. This happens in most cases, but not all. Any help please?

  Hi colini,.

  Suggest you to reset preferences in Lightroom and then, check out: given to zero (or "Trashing") the Lightroom preference file. Lightroom Forums

  Kind regards

  Claes

• Satellite 1900-303 turns off for no apparent reason

  I got my Satellite 1900 303 for about 2 years and no problem. In the last month, I had a problem with him turn off his car suddenly and for no apparent reason. I checked virus and have found no virus. Can anyone suggest why I did this. I was wondering is that he has been making overheated?

  Thank you

  Hello

  Believe me, there is always a reason why this happens. From your description, I assume that your unit is overheating. If the temperature is too high the unit simply stops.

  You need to clean the device. After that cleaning the unit should work properly again.

• Connection failed for an unknown reason (IOM Java Client)

  Hello

  
  

  I have some code Client Java IOM that works if I have access to IOM without SSL.

  
  

  The problem occurs when I try another (production) server that uses the SSL protocol

  
  

  I use these libraries

  
  

  common - logging.jar

  cryptoj.jar

  EclipseLink.jar

  JRF - api .jar

  oimclient.jar

  Spring.jar

  WebServiceClient + SSL.jar

  wlfullclient.jar

  I also tried to add the system properties to add SSL debug, to ignore invalid host names, etc..

  I also created a file of keys, certificates imported and added

  		System.setProperty ("javax.net.ssl.trustStore", KEYSTORE);
  		System.setProperty ("javax.net.ssl.trustStorePassword", KEYSTORE_PASSWORD);

  		opening of session
  		System.setProperty ("java.security.auth.login.config", AUTHWL_CONF_PATH);
  		System.setProperty ("APPSERVER_TYPE", "wls");
  		String ctxFactory = "weblogic.jndi.WLInitialContextFactory";
  		< String, String > Hashtable env = new Hashtable < String, String > ();
  		env.put (OIMClient.JAVA_NAMING_FACTORY_INITIAL, ctxFactory);
  		env.put (OIMClient.JAVA_NAMING_PROVIDER_URL, OIM_JAVA_API_URL);
  		OIMClient client = new OIMClient (env);
  		customer. Login (OIM_ADMIN, OIM_ADMIN_PASSWORD.toCharArray ());

  URL of the IOM is referenced by intellectual property

  The error message is not really help a lot. The green text was added by me.

  User name and password have been double-checked, they work for the web INTERFACE.

  
  

  javax.security.auth.login.LoginException : weblogic.socket.UnrecoverableConnectException : [connection failed for an unknown reason: < bytes garbage here >]

  to weblogic.security.auth.login.UsernamePasswordLoginModule.login (UsernamePasswordLoginModule.java:194)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Method Native( )

  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke (Method.java:606)

  to javax.security.auth.login.LoginContext.invoke (LoginContext.java:762)

  to javax.security.auth.login.LoginContext.access$ 000 (LoginContext.java:203)

  to javax.security.auth.login.LoginContext$ 4.run (LoginContext.java:690)

  to javax.security.auth.login.LoginContext$ 4.run (LoginContext.java:688)

  at java.security.AccessController.doPrivileged (Method Native( )

  to javax.security.auth.login.LoginContext.invokePriv (LoginContext.java:687)

  to javax.security.auth.login.LoginContext.login (LoginContext.java:595)

  to Thor.API.Security.LoginHandler.weblogicLoginHandler.login (weblogicLoginHandler.java:61)

  to oracle.iam.platform.OIMClient.login (OIMClient.java:212)

  to oracle.iam.platform.OIMClient.login (OIMClient.java:196)

  You cannot refer to the URL of the IOM by IP and use SSL. The host name must match the name on the certificate that will never happen if it is an IP address.

• How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!

  How can I fix the "drag and drop" feature in Windows 7?  It used to work, but now does not work, for no apparent reason!

  What happens when you try?  Make sure you drag the icon image and not the text of the name.

  If it still doesn't work there are some registry changes that can try to alleviate the problem.  But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you.  Here's how:
  1. Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
  2. Click Next, choose a date before the problem started, then click Next once more.

  • This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
  If the system restore does not resolve the problem try this to replace missing or corrupted system files.  Here's how:
  1. Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
  2. At the command prompt to start the File System Check, type sfc/scannow .

• Lost history and all the bookmarks for no reason. Upgrade to firefox 9 but the bookmarks bar does not. Nothing can bookmark and will not backup HTML file import. Need help!

  Running Windows XP Professional. Use no. Add ons for Firefox. Don't add any new program.

  Thank you! I made a new profile and all imported perfectly. A pleasure! Appreciate the help.

• network, audio and all the drivers for HP 15 - d054sq

  Hello

  I can ' t find the network, audio drivers and all drivers for HP 15-d054sq.

  OS win7/64.

  Official HP drivers do not work.

  Help, please!

  Hello:

  You need this card wireless driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0002

  You will also need this bluetooth driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Satellite Pro A210-1AZ - I lose the WIFI connection for no apparent reason

  I am connected to a wireless network with my A210-1AZ. There are 4 wireless networks in my area, belonging to other people on my street. I connect to my network, and everything seems to work fine...

  Up to an hour, I just lost the connection without apparent reason. I click on the ' Connect or disconnect ", and he cannot find + all + 4 wireless networks. I press refresh - nothing. I go to Device Manager, disable then re-enable the best to the wireless network device. Can I do "connect or disconnect", and it shows all 4 networks back. If I connect... for another hour... then I have to do it again.

  It seems worse when I use the network a lot, that is to say. Download large files, sometimes after 10 minutes. If it is fairly inactive, it lasts not more. But it always happens in an hour or two.

  It becomes really annoying!

  Please do BIOS update to the latest version. The problem should be solved.
  By the way: card WLAN that is listed in the Device Manager? Intel or Atheros?

• Speaker turns off automatically and troubleshooting speaker States not connected

  For no reason my sound just off (shows an "X" on the icon speaker... when I troubleshoot it says, not plugged, when in fact it is the President.) I have to disconnect the cables of the loudspeakers, turn off the pc, reconnect and restart the pc... Someone at - it solution/recommendation. Thank you!

  Hello

  1. what version of Windows are you using?

  2 have you tried to connect speakers replacing?

  Follow the link for sound problems below.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  I hope this helps.

• 19DL502B Combi TV/DVD TV turns on automatically and the roar of the DVD

  Hello

  I have a Toshiba TV/DVD combi 19DL502B and it seems to turn on randomly. When the TV is switched on the DVD snoring and click on even with no DVD in there.

  No idea what is the problem?

  See you soon

  Hey what the hell are you doing on everything. ?