Audible clicks of noise generation/acquisition vi

Similar Questions

• Audible clicks - removal

  Hello everyone,
  
  Using Captivate 2.0 (updated to 3.0 in the next few weeks). I consider myself as in computing, but can't seem to locate the menu selection to turn off the audible "click" that occurs when a key is pressed by the student. Feedback said that many find annoying after a while... I agree with you.
  
  We have some e-Learning with audio/video so cut the audio is not an option. Any suggestions?

  Hi cegrubb and welcome to our community

  See if the link below will help you.

  Click here.

  See you soon... Rick

• Satellite C670-11 q clicking loud noise the HARD drive

  Hello!

  I helped my neighbor to find a new laptop and the entire installation and start-up.

  We ordered a C670-11 q and it works very well, theres just a nuisance.
  The drive made strong rattling noises, not as a dying or working drive. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  I don't know if this laptop has a shock sensor to do this? The laptop was flat on the table, and there where NO vibrations while she does. There are no clicks under load, but they occur randomly when walking to the idle or surf/write normal.

  I checked also save energy options and disabled to turn the disk, without help.
  Also, this seemed odd, because the clicks occur often several times in a row. But there is no doubt it more when running on the battery.

  I am running the BIOS and latest drivers in the area of support (as of yesterday).
  The disk is configured in performance mode, I'm testing battery economy - should I?

  And no, the drive took a beating. I was the first person to turn it on.

  The drive is Hitachi, I don't run their analysis - no error.

  Any help is greatly appreciated: o)

  > The drive makes some noises clicking on, not as a dying drive or work. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  One of my computer portable HARD drive makes such noise too.

  I m not exactly why, but I also think that it is at the head of discs moving record position.

  However, I think that this is not really a malfunction since the laptop works pretty well and I didn't notice any problems with the HARD drive or files but I have created a backup of my files, just to be sure that you know
  I think you should save the date just to be sure

• HP Envy x 360 15t w100 CTO: noticeable click/Static noise - HP Envy x 360 15 t

  Immediately after the start of my new laptop HP Envy, I noticed a continual noise coming from the top right, above the numberic key. It's a click rotation, static noise and what looks like spinning. The noise resembles the hardrive treatment, however it is continuous with diferent sounds coming in waves. I read a few other complaints with the same question, but no solution. Noise is not arrogant but extremely annoying and can be heard in a quite room. I made sure to day/download the most recent included drivers and BIOS updates, which did nothing.

  Here is a recording of the sound while the laptop is powered on with no application open... the noise becomes louder and more noticeable that several processes are used in 15 seconds.

  https://www.dropbox.com/s/flp32q2fhxkhzd2/IMG_0252.mov?DL=0

  Product #: L8R68AV

  Any help would be appreciated, thanks.

  marianne_cc wrote:
  

  Have someone solved this problem? I have the same... Thank you

  NOPE! I really don't think that noise can be stopped unless HP will replace the HDD entirely for you.

  I returned this laptop and just kept the other model that was purchased at Best Buy model HP Envy x 360 m6-103dx. The HP Envy 15 360 t x I received directly from HP was a major problem, not to mention the noise. It would not be closed. Every time I have would shut down the laptop, the laptop back on itself. The only way to shut it down was a closed hard, where you have to press and hold the power button for several seconds. I tried several ideas services troubleshooting HP customer and nothing has worked. No idea what was wrong with this machince.

• Satellite U500-1E0 - how to turn off the mouse "by clicking on" noise

  Please can someone tell me how to turn off the little "click" the mouse buttons do when they're depressed?

  Thank you.

  Hello

  What rattling noise do you hear?
  The rattling noise which is made by touchpad?
  Is - this mechanical noise or sound comes from the speakers?

• Various crashes, freezes, video glitches, audible clicks

  These kinds of things have been going on for some time. I get these kinds of things around once a week or more. Today video glitching presented, so I think it's time to do something.

  I get the gray multilingual screen accident sometimes, or restarts, the screen freezes or vanish by clicking or ticking noise coming out of the speaker. Today, there are blocks of blinky graphics truncated past horizontally on the screen. Didn't really crash, but I restarted and it didn't come back again.

  I have a MacBook Pro (retina, 13 inches, beginning 2013) 3 GHz Intel Core i7 Intel HD Graphics 4000 8 GB of ram and 750 GB SSD.

  Running 10.10.5, but the problem has happened for a long time and several system updates.

  Went to the Genius bar in March, and they ran diagnostics - own. Looked at crash stuff in the console and restarting recommended.

  I decided to put up with it, but it seems to have worsened recently.

  I learned to leave iPhoto closed, so I don't have to rebuild the library after losing (even if it's in the background).

  Run the extended Apple hardware test today after the video glitching (I video iPhone if it's useful). The test revealed no problem.

  Things that seem to trigger these problems: a lot of scrolling, video playback, audio playing. I tend to keep at least 50 Chrome open tabs. But I have disabled Flash in all browsers. Accidents may be more likely to occur when the machine is heated a lot of treatment - usually too many tabs in chrome that causing.

  That's what I see happening in the console 'crash ': research

  2015-12-05 1:39:34.000 PM kernel [0]: sandbox: com.apple.WebKit (1285) deny-read-file data/Library/Application Support/CrashReporter/SubmitDiagInfo.domains

  2015-12-05 1:39:34.178 PM com.apple.WebKit.WebContent [1285]: MessageTracer: load_domain_prefix_whitelist:115: opening the file in white list: / Library/Application Support/CrashReporter/SubmitDiagInfo.domains

  2015-12-05 1:44:45.975 PM ReportCrash [5795]: report of incidents recorded for com.apple.WebKit.WebContent [1285] version 10600 (10600.8.9) for /Users/thomaus/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-12-05-134445_thomausbook.crash

  2015-12-05 1:44:40.888 PM com.apple.xpc.launchd [1]: (com.apple.ReportCrash [5795]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  2015-12-05 1:44:43.766 PM ReportCrash [5795]: invalid connection: com.apple.coresymbolicationd

  2015-12-05 1:47:11.645 PM ReportCrash [5819]: report of incidents recorded for iPhoto [5410] version 9.6.1 (910.42) to/Users/thomaus/Library/Logs/DiagnosticReports/iPhoto_2015-12-05-134711_thomausb ook.crash

  I'm looking for how I should address troubleshooting. Is it possible to find & fix something like that?

  Or just fuck and troubleshooting, get started on again.

  Then I would look for advice on how best to do that said the person of genius bar - wipe the drive and reinstall. This user is ongoing for a long time. OS 7 maybe? (Similar course crash was going before I migrated to an iMac for Macbook.) But I want to keep as much of my settings, iTunes library, programs, iPhoto library intact as possible.

  Or just continue to live with it. The MBP restarts pretty quickly. :-)

  Post the report of full kernel panic (or some of them)

  http://support.Apple.com/kb/ht2546>

  https://support.Apple.com/en-us/HT201753>

  After the release of EtreCheck in another answer

  https://discussions.Apple.com/docs/doc-6174>

  Try to start in safe mode

  http://support.Apple.com/kb/ht1564>

  as many times these problems are caused by part 3, additions like anti-virus, Mac cleaners and cleaners for memory (all useless, but people always install).

• Clicking printing noise

  Printer all-in-one HP2610

  Windows 7 Ultimate

  I just installed new ink cartridges (96/97) and am getting a clicking sound when printing, but I don't get the clicks while using the copy function. I uninstalled and reinstalled the cartridge and run the alignment program. Don't know whether to run until it closed or replace it. I have about $90 in ink cartridges and impossible to find someone who uses them.

  Hello Chuck1103,

  • Please open the rear hatch of the printer.
  • Clean the rollers using a lint, turning the direction of counter clock wise.
  • Close the rear access door.
  • Try to print.

  If the problem persists, then call HP Tech Support (US) 1-800-474-6836

  Kind regards
  Jabzi
  
  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give a Kudos!
  I work for HP

• There is a weird sound coming from my speakers. It is difficult to describe, somehow clicking or noise of birds.

  The sound happened and continues, its on. I don't play any music or whatever it is with audio.  Can anyone help with this problem.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, that you have found a sound speaker distortion even if you don't play audio in Windows 7. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Disconnect and reconnect the speakers and check if it works.

  Consult the manual of the speaker for the connections.

  Method 2:

  Run the troubleshooter from the link.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Using the windows-related issues feel free to post on the Microsoft Community Forum

• My done printer a horrible, loud clicking noise when I click on print

  All-in-one printer, HP Deskjet F4480: my printer is a horrible, loud clicking (3-5 clicks) of noise, just at the time when I click on print.  Once it starts the print cycle, the noise disappears.  The paper version is fine.  There is no paper jam, an ink problem or any other problem that I can diagnose.   I'd appreciate any help to what is the problem and what I can do about it.  Thank you.

  Hello GraceGram,

  In order to get the best and most accurate answer to your question, please submit your question in the forums of HP printer. You have posted on the forum of office equipment / laptop. The link below will allow you to submit your question. It is possible that you may need to create another profile.

  HP printer Forum

  If I was helpful, or if you want to say thanks to me trying to help, click on the White Star under my name to give me congratulations. I really appreciate it.

  Thank you

• Clicking noise rMBP 13 "Early 2015

  My brand new Macbook Pro w / Retina display makes weird clicking metallic noise every time in some time even when placed on a flat surface. Even if I unplug everything including the load and mouse cable and watch a video with the sound turned off, or browse the internet, it always makes noises, (like the metal touch metal type sound) around 5 - 6 times a day. It is generally low, but it is still very annoying.

  There is no HARD disk that could cause it. Well that sounds quite similar.

  If you use a similar laptop, please report if you can hear all sounds (not exactly these) in a similar configuration, say, in 1 hour, by navigating with a mouse and not even touch.

  I have the same kind of problem. I have a ticking noise similar to that of the hard drive with one click. It seems completely random, but I think that it is connected to the fan. I heard the sound of click while closing off the PC and when the fan speed increase. But it's completely random and unpredictable.

  Macbook Pro retina 13 ", OS X 10.11.2 2015

• AT300 virtual keyboard 'click '.

  How can I disable the audible 'click' when I use the virtual (on-screen) keyboard?

  Hello

  Which may depend on which keyboard Manager you are using.
  If you use the defaults, like me, it's probably Swype, which manages the entrance.

  To change sound feedback on the keyboard go you (excuse my English words here - I use a Swedish aircraft and translates into English.) The actual words on your unit do not match my translation 100% so please request information and seek similar formulations to your device):

  Settings > language & entrance

  The second section named methods keyboard and input below Swype.

  Click the settings on the right side of the line of Swype.

  You will get a new image.
  Click settings
  Uncheck the box back.

  You are done now and should go out all the way to the main screen.

  I hope this helps.

  Tom BR

• Two subsequent acquisitions - 2 does not work

  Hello

  Here are the main features of my configuration:

  1. Two channels of generation/acquisition
  2. Each channel was part of generation (staircase varying low) and acquisition (output is shorted at the entrance)
  3. When the output value reached a threshold, stairs stops and last tension remains in the output
  4. The behavior of two Channels are identical, the only difference - the value of a threshold voltage
  5. And finally the most important feature - channel 2 should run once stops 1 channel

  The VI is organized as follows:

  1. Outer loop that should run 2 times - it starts with the 1st string and then should run with 2nd channel
  2. The FOR loop variable 'i' controls:
     • "source" and "sink" for the execution of channel
     • choice of the threshold
     • local variable (which stops staicase) choice
     • indicator for the performance of channel

  The problem is: 2nd iteration of the outside OF the loop does not run.

  Where I've been misled?

  Thanks in advance

  Pavel

  Hi Pavel,

  When the 2nd iteration of the loop FOR external it starts no way the 1st iteration is not yet complete. THINK THE STREAM!

  Have you checked that the behavior to help highlight the debug execution? Where your loop IS blocked?

  Edit: I see now where your 1st iteration gets stucked - even without executing the code!

  Please check all THE terms of judgment of your inner loops: one of them will never stop in the 1st round of your outer loop!

• Every 5 seconds there is a short click, done grating burst from somewhere in the main Board or the chip. All PC components vibrate for half a second.

  My PC components vibrate, and then click (grinding noise). It seems to be a kind of discharge of energy. I tried to remove the A drive (which vibrated more)... continuation of the click. I put it in a disk hard nine... more vibrate. I ran the computer in Mode safe and this is... NO NOISE! What is going on?
  What is a 'switching due to inductance noise"? Is - this "deferred procedure calls"?
  It's obviously some sort of condition of signs, not a mechanical condition.
  Why every 5 seconds?
  Any suggestions are appreciated.
  (BTW... Yes, I already dusted off.)

  Hello Computrified,

  Thank you for your message.  You can review your fans.  Since these are the only parties 'move' in your computer, it is possible that one could go bad or become loose.  Please let us know the result.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Click on the Audio box when you go to a slide of simulation - can it be cut

  Hi people

  I have a click rectangle that directs the user to a slide of simulation. When selected, you will hear an audible 'click' when it moves to the slide. Is it possible that turns off? I also tried a smart shape instead, and even click on it. What because of the simulation?

  Any clarification would be great.

  Thank you

  Steve

  You don't say which version are you using? If its CP8 or 9, you can turn off the clicking sound in the Actions tab, as you can see in this screenshot:

  

• The noise generator was re-introduced in hearing CS6?

  Hello everyone

  We (the company I work for - acoustic Department) purchased several licenses of hearing CS6, shortly after its release. It is is proved that all the generation of noise had been disabled, so we went down to Audition 3 (noise is crucial for acousticians).

  The message was that generation of noise would be activated once the development completed. ID really like to be able to use other features in CS6 audition, so I was hoping that the development would end soon...

  IM struggling to find this information on the Web site of the hearing, then I would be very grateful if someone could help me by answering the following question:

  "Hearing cs6 now has a noise generator, or is it still not available?

  And if I'm lucky - answering the following question:

  "generation of noise will be ever available in hearing cs6?

  Thank you

  -Torus

  Tore_sa wrote:

  Hello everyone

  We (the company I work for - acoustic Department) purchased several licenses of hearing CS6, shortly after its release. It is is proved that all the generation of noise had been disabled, so we went down to Audition 3 (noise is crucial for acousticians).

  The message was that generation of noise would be activated once the development completed. ID really like to be able to use other features in CS6 audition, so I was hoping that the development would end soon...

  Several things: rewrote the code for hearing as an app to double platform in pieces around release dates - noise generation has not been disabled, so simply had not been written in its new format when CS6 is released. CS6 is now one 'finished' (so), but apparently no other products product will be - you can blame the Sarbanes-Oxley Act for it (explained elsewhere).

  But what about the CC, yes there generation of noise. It generates Brown, White Rose and gray noise, and you can vary the intensity and the DC of this offset (use not so much for Acoustics,...). Also noise can be generated as spatial stereo or independent channels. And you can also have reversed channels, or only mono.